Thematische Bibliographien / Optical measuring machine

Inhaltsverzeichnis

  1. Zeitschriftenartikel
  2. Dissertationen
  3. Buchteile
  4. Konferenzberichte
  5. Berichte der Organisationen

Auswahl der wissenschaftlichen Literatur zum Thema „Optical measuring machine“

Autor: Grafiati
Veröffentlicht am 28. Juni 2021
Zuletzt aktualisiert am 5. Februar 2022

Geben Sie eine Quelle nach APA, MLA, Chicago, Harvard und anderen Zitierweisen an

Wählen Sie eine Art der Quelle aus:

Machen Sie sich mit den Listen der aktuellen Artikel, Bücher, Dissertationen, Berichten und anderer wissenschaftlichen Quellen zum Thema "Optical measuring machine" bekannt.

Neben jedem Werk im Literaturverzeichnis ist die Option "Zur Bibliographie hinzufügen" verfügbar. Nutzen Sie sie, wird Ihre bibliographische Angabe des gewählten Werkes nach der nötigen Zitierweise (APA, MLA, Harvard, Chicago, Vancouver usw.) automatisch gestaltet.

Sie können auch den vollen Text der wissenschaftlichen Publikation im PDF-Format herunterladen und eine Online-Annotation der Arbeit lesen, wenn die relevanten Parameter in den Metadaten verfügbar sind.

Zeitschriftenartikel zum Thema "Optical measuring machine"

1

Meier, Nicolas, und Anthimos Georgiadis. „Optical Part Measuring inside a Milling Machine“. Key Engineering Materials 613 (Mai 2014): 440–45. http://dx.doi.org/10.4028/www.scientific.net/kem.613.440.

Der volle Inhalt der Quelle
Annotation:
The dimensions of a workpiece have been measured during the milling process using a 3D laser inspection system. Re-clamping of the work piece has been avoided but a short interruption of the milling process took place. All three dimensions of the part have been measured, height and width using a profile scanning devise based on the laser triangulation method and the length using also the displacement features of the machine tool. Gauge blocks with the reference dimension of 4, 8, 10, 14, 18 and 23 mm have been used for the verification of the measurements. The measured values for the height deviate from the real value between 0 to 19 μm. The deviations of the length lie between 0 and 33 μm. The deviations of the width are higher and they lie between 0 and 150 μm, because of the scanning steps of the devise. The measurement of the width could be improved using a second scanner perpendicular to the first one in order to achieve an overall part inspection with deviations lower than 33 μm.
APA, Harvard, Vancouver, ISO und andere Zitierweisen
2

Caja, Jesús, Emilio Gómez, Piera Maresca und Miguel Berzal. „Uncertainty Estimation for the Optical System of Optical Measuring Machines“. Key Engineering Materials 615 (Juni 2014): 95–101. http://dx.doi.org/10.4028/www.scientific.net/kem.615.95.

Der volle Inhalt der Quelle
Annotation:
This paper presents the problem of optical measuring machine calibration, emphasizing the calibration of the "optical system", omitting the calibration of the "machine system". The calibration of an optical measuring machine is the first step before using the instrument for any application. For this purpose, a mathematical model has been developed to transform the coordinates of a point in space (3D) into coordinates of a point in an image (2D). Using this camera model, a calibration procedure has been developed using a grid distortion pattern. Finally, a procedure for calculating the uncertainty of the camera and geometric distortion parameters based on the Monte Carlo method has been developed.
APA, Harvard, Vancouver, ISO und andere Zitierweisen
3

SHI Zhao-yao, 石照耀, 于渤 YU Bo, 叶勇 YE Yong und 闫璐 YAN Lu. „Hourglass hob measuring machine“. Optics and Precision Engineering 23, Nr. 10 (2015): 2827–34. http://dx.doi.org/10.3788/ope.20152310.2827.

Der volle Inhalt der Quelle
APA, Harvard, Vancouver, ISO und andere Zitierweisen
4

Simonović, Milan, Dragan Lazarević, Marko Simonović und Bogdan Nedić. „Comparison of measurement using optical measuring systems and coordinate measuring machine“. IMK-14 - Istrazivanje i razvoj 26, Nr. 2 (2020): 35–41. http://dx.doi.org/10.5937/imk2002035s.

Der volle Inhalt der Quelle
Annotation:
The paper presents the results of measuring the gearbox housing with the ATOS optical measuring system, the TRITOP system and the "TESA micro-hit 4-5-4" coordinate measuring machine. The aim of the study was to determine the differences in modern measuring systems and whether these differences affect the final measurement result when controlling parts of a complex configuration. At the beginning of the paper, the way of functioning of the used measuring systems and the results of research in this area are described. GOM Inspect software used for the ATOS and TRITOP measuring systems, while PC DMIS software used for the coordinate measuring machine. The analysis of the obtained results showed that there are significant differences in the measurement results and that the measuring systems used can't be applied with the same success to the measurement of parts of complex configuration such as the gearbox housing.
APA, Harvard, Vancouver, ISO und andere Zitierweisen
5

Mares, Ancuta I., und Rob H. Bergmans. „Evaluation of an optical coordinate measuring machine for measuring grated structures“. Measurement Science and Technology 23, Nr. 9 (25.07.2012): 094012. http://dx.doi.org/10.1088/0957-0233/23/9/094012.

Der volle Inhalt der Quelle
APA, Harvard, Vancouver, ISO und andere Zitierweisen
6

Balle, Bernd. „Measuring means knowledge“. Advanced Technologies in Mechanics 3, Nr. 1(6) (02.03.2017): 24. http://dx.doi.org/10.17814/atim.2016.1(6).37.

Der volle Inhalt der Quelle
Annotation:
Optical designers, physicists and engineers at FISBA develop, analyze and optimize optical components on behalf of their customers. Thanks to its innovative production techniques, the Swiss company is widely renowned as a manufacturer of highquality optical components and systems. A ZEISS MICURA coordinate measuring machine is among the tools used by the company to ensure the quality that is valued around the globe.
APA, Harvard, Vancouver, ISO und andere Zitierweisen
7

Jäger, Gerd, T. Hausotte, Eberhard Manske, H. J. Büchner, R. Mastylo, N. Dorozhovets, R. Füßl und R. Grünwald. „Nanometrology – Nanopositioning- and Nanomeasuring Machine with Integrated Nanopobes“. Materials Science Forum 505-507 (Januar 2006): 7–12. http://dx.doi.org/10.4028/www.scientific.net/msf.505-507.7.

Der volle Inhalt der Quelle
Annotation:
The paper describes the operation of a high-precision wide scale three-dimensional nanopositioning and nanomeasuring machine (NPM-Machine) having a resolution of 0,1 nm over the positioning and measuring range of 25 mm x 25 mm x 5 mm. The NPM-Machine has been developed by the Technische Universität Ilmenau and manufactured by the SIOS Meßtechnik GmbH Ilmenau. The machines are operating successfully in several German and foreign research institutes including the Physikalisch-Technische Bundesanstalt (PTB). The integration of several, optical and tactile probe systems and scanning force microscopes makes the NPM-Machine suitable for various tasks, such as large-area scanning probe microscopy, mask and water inspection, circuit testing as well as measuring optical and mechanical precision work pieces such as micro lens arrays, concave lenses, mm-step height standards.
APA, Harvard, Vancouver, ISO und andere Zitierweisen
8

Koubek, Jan, Stepan Chladek, Jiri Sveda und Ivan Divis. „OPTICAL EQUIPMENT FOR MEASURING DEFORMATION OF MACHINE TOOL COMPONENTS“. MM Science Journal 2016, Nr. 02 (08.06.2016): 907–11. http://dx.doi.org/10.17973/mmsj.2016_06_201612.

Der volle Inhalt der Quelle
APA, Harvard, Vancouver, ISO und andere Zitierweisen
9

Kirkland, Eric, Thomas R. Kurfess und Steven Y. Liang. „An Optical Coordinate Measuring Machine for Nanoscale Dimensional Metrology“. Journal of Advanced Computational Intelligence and Intelligent Informatics 8, Nr. 1 (20.01.2004): 39–44. http://dx.doi.org/10.20965/jaciii.2004.p0039.

Der volle Inhalt der Quelle
Annotation:
Coordinate Measuring Machines (CMMs) are commonly used for geometry verification and replication on solid parts and work pieces on many scales. As the parts predicable continues to grow smaller and smaller, so grows the need to accurately measure the dimensional accuracy of these parts. This is partly because of how the critical part tolerances become as dimensions shrink and geometries become more complex. Research is currently underway at the Georgia Institute of Technology to develop a system for dimensional metrology at the nano-scale. The goal is to develop a versatile, non-contact, three-dimensional system capable of making accurate measurements on the nano level of form attributes of micro electro-mechanically manufactured parts. The Nano-CMM developed consists of a laser probe, a 6-axis positioning table, and a support frame. This paper describes the calibration of probe, processing of measurement signals, detection of solid edges, and software interface for system automation.
APA, Harvard, Vancouver, ISO und andere Zitierweisen
10

Hemming, Björn, Erkki Ikonen und Mart Noorma. „Measurement of Aperture Areas Using an Optical Coordinate Measuring Machine“. International Journal of Optomechatronics 1, Nr. 3 (07.09.2007): 297–311. http://dx.doi.org/10.1080/15599610701548803.

Der volle Inhalt der Quelle
APA, Harvard, Vancouver, ISO und andere Zitierweisen
Mehr Quellen

Dissertationen zum Thema "Optical measuring machine"

1

Kirkland, Eric Alan. „A nano coordinate machine for optical dimensional metrology“. Thesis, Georgia Institute of Technology, 2003. http://hdl.handle.net/1853/16525.

Der volle Inhalt der Quelle
APA, Harvard, Vancouver, ISO und andere Zitierweisen
2

Harris, John O. Spence Allan D. „Geometric and quasi-static thermal error compensation of a laser digitizer on a coordinate measuring machine“. *McMaster only, 2004.

Den vollen Inhalt der Quelle finden
APA, Harvard, Vancouver, ISO und andere Zitierweisen
3

Fulová, Silvia. „Stanovení nejistoty měření optického měřicí stroje pomocí laserinterferometru“. Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2021. http://www.nusl.cz/ntk/nusl-443250.

Der volle Inhalt der Quelle
Annotation:
This final thesis is dealing with stating uncertainty of optical measuring device Micro-Vu Sol 311, which is located at Faculty of mechanical engineering in Brno. Overview of coordinate measuring machines (CMM for short) and analyzed present status of optical CMM is in summation. This part also includes basic metrology concepts and methodology of determination of uncertainty of measuring instrument. Content of following parts of thesis is detailed description of Micro-Vu SOL 311 machine and etalons that were used in determination of enhanced uncertainty of measurement such as gage blocks, laser interferometer and glass scale. Last part of this thesis includes summary of achieved results and recommendations for practice.
APA, Harvard, Vancouver, ISO und andere Zitierweisen
4

Slíž, Michal. „Posouzení vhodnosti optického měřicího přístroje“. Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2021. http://www.nusl.cz/ntk/nusl-442832.

Der volle Inhalt der Quelle
Annotation:
The diploma thesis deals with the capability assessment of an optical coordinate measuring machine according to VDA 5. The capability assessment is an effective tool for deciding whether the evaluated measuring machine is capable for the intended use and under which conditions its use is possible. The theoretical part of the thesis is devoted to the analysis of coordinate measuring machines, with a closer focus on a subset of optical measuring machines and the analysis of their capability assessment procedures. In the practical part of the thesis, the selected procedure is applied on the specific measuring machine Micro-Vu Sol 311. The main contribution of this thesis is a description of the possibilities of the considered coordinate measuring machine for its further use in the educational process at the Faculty of Mechanical Engineering of Brno University of Technology.
APA, Harvard, Vancouver, ISO und andere Zitierweisen
5

Mank, Slavomír. „Analýza rizik a bezpečnosti u optické kontrolní stanice“. Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2014. http://www.nusl.cz/ntk/nusl-231056.

Der volle Inhalt der Quelle
Annotation:
This thesis discusses of safety of machinery from production of our company. It is an optical measuring station to check spin valve stroke of inlet valve of the high pressure fuel pump. It also deals with the analysis of the legislative situation in this field. After initially acquaintance, the block diagram creating and definition of the limits, was conducted risk analysis of machinery.
APA, Harvard, Vancouver, ISO und andere Zitierweisen
6

MODI, ATUL. „A DESIGN OF EXPERIMENTS BASED APPROACH FOR OPTIMAL INSPECTION OF CIRCULARITY TOLERANCE“. University of Cincinnati / OhioLINK, 2002. http://rave.ohiolink.edu/etdc/view?acc_num=ucin1031335132.

Der volle Inhalt der Quelle
APA, Harvard, Vancouver, ISO und andere Zitierweisen
7

Palásek, Vítězslav. „Souřadnicové měřicí stroje (CMM) s optickým snímacím systémem a optické CMM“. Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2009. http://www.nusl.cz/ntk/nusl-228384.

Der volle Inhalt der Quelle
Annotation:
This graduation work is about co-ordinal measuring machines (CMM) with optical reader system and optical CMM. In accordance with submission and in terms of survival well known contactless systems the direction is to make methodology objective classification of rating with granting summary of these systems. The first part contains optical principles for visual scanner in CMM and optical CMM. Ist is described there principle of contactless obtaining steric digital version of measured object with using laser and optical facilities. The second part contains brief makes survey of these contactless systems and their component which are used for co-ordinal measuring. The survey is devided into optical readers, which are put on CMM brake or on mobile measuring brake and on optical CMM, which localize position measuring/sensing head in the space or they read measured object from specific distance – fotogrammetric. Characteristic of offered systems and chart with technical data are mentioned with each maker. The third and fourth part is about submission methodology for objective choice suitable sort of reader, optical CMM in target of characteristic reader system quality. And from this methodology is given the choice of suitable exponent stationary measuring machine with contact and contactless way of reading and their comparison.
APA, Harvard, Vancouver, ISO und andere Zitierweisen
8

Košťák, Ondřej. „Kalibrace optických souřadnicových měřicích strojů GOM ATOS“. Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2017. http://www.nusl.cz/ntk/nusl-318719.

Der volle Inhalt der Quelle
Annotation:
This master’s thesis contains the basic division of 3D methods which are used for reconstruction of measured objects. Furthermore the types of structured light patterns used for 3D triangulation. It also contains a description of the construction and functions of GOM ATOS and TRITOP machines. Primarily the thesis deals with the calibration of these machines, the design of suitable materials standard of size and the internal calibration methodology used by ŠKODA AUTO a.s. The text also includes verification of the proposed calibration procedure in practice, proposal for determination of calibration uncertainties and recommendations for practice.
APA, Harvard, Vancouver, ISO und andere Zitierweisen
9

Huang, Ching-Yao. „Measurement and Comparison of Progressive Addition Lenses by Three Techniques“. The Ohio State University, 2011. http://rave.ohiolink.edu/etdc/view?acc_num=osu1306849853.

Der volle Inhalt der Quelle
APA, Harvard, Vancouver, ISO und andere Zitierweisen
10

Wu, Chun-Kuan, und 吳俊寬. „A feasibility of optical methods for measuring steel ball center for 5-axis machine tool calibration“. Thesis, 2017. http://ndltd.ncl.edu.tw/handle/90140134701386217856.

Der volle Inhalt der Quelle
Annotation:
碩士
國立中興大學
機械工程學系所
105
This study is about the feasibility of the newly designed static error measurement system for five-axis machine tool to measure geometry errors. The function requirements are to overcome the limitation of the measurement systems developed before, including increasing the working distance, applying three-dimension measurement, enhance the ability to use under the processing environment, lower the price of the reference point. The tool center point (TCP) was represent by a steel ball, named artifacts by researchers. The steel ball feature is having the same shape observed from all direction, giving that all the reflection from all direction behave as the same. This feature meets the requirements for five-axis machine tool error measuring system due to the TCP coming from all direction as well. Image processing is applied to the system to reach the function requirements. To measure the center of the steel ball, there are three method mentioned in this thesis, involving contour measuring, sphere face interfering, surface character. Backlight projection is used in contour measuring, the circle center capture by the interferometer estimate the ball displacement, surface character is produced by character light which applied virtual image generated by steel ball. The thesis describes four measurement systems, including backlight method, interferometers method, mirror reflection method, light field camera method. Back light system contains two parallel light, a steel ball, two sensors to build up a three-dimension measuring system. Interferometer system is based on Michelson interferometer by putting a steel ball as the sample and the reference surface is set on the plan side of plan-convex plan with half reflection coating. Mirror reflection system contains four mirror sides giving two capturing angle. Light field camera capture three-dimension picture by micro lens array. One-dimension experiment is used to evaluate the correlation between steel ball displacements and image displacements, and to verify the anti-processing-environment capability. Back light system reach the precision within 1μm with the system as shown and the precision still remain after adding cutting fluid while the accuracy move 15μm. Interferometer system can’t be used after adding cutting fluid. Mirror system reach the precision within 3μm and 1μm with circle fitting and image correlation while the accuracy move 35μm. Mirror reflection reach the function requirements. Virtual image is used to generate optical character successfully. Light field camera is expected to be feasible to the static error system development.
APA, Harvard, Vancouver, ISO und andere Zitierweisen

Buchteile zum Thema "Optical measuring machine"

1

Cook, R. B., C. Maul und A. M. Strickland. „Validation of an Optical Coordinate Measuring Machine for the Measurement of Wear at the Taper Interface in Total Hip Replacement“. In Modularity and Tapers in Total Joint Replacement Devices, 362–78. 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959: ASTM International, 2015. http://dx.doi.org/10.1520/stp159120140123.

Der volle Inhalt der Quelle
APA, Harvard, Vancouver, ISO und andere Zitierweisen
2

Wang, Wei, Sung Hwan Kweon, Young Suk Kim und Seung Han Yang. „Design of Geometric Error Measuring System on a Miniaturized Machine Tool with Optics“. In Optics Design and Precision Manufacturing Technologies, 1215–20. Stafa: Trans Tech Publications Ltd., 2007. http://dx.doi.org/10.4028/0-87849-458-8.1215.

Der volle Inhalt der Quelle
APA, Harvard, Vancouver, ISO und andere Zitierweisen
3

Schwingshackl, Christoph W. „Measuring Aero-Engine Pipe Vibration with a 3D Scanning Laser Doppler Vibrometer“. In Rotating Machinery, Optical Methods & Scanning LDV Methods, Volume 6, 101–4. Cham: Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-47721-9_11.

Der volle Inhalt der Quelle
APA, Harvard, Vancouver, ISO und andere Zitierweisen
4

Grimble, M. J., und M. R. Katebi. „Polynomial Solution of H 2 and H∞ Optimal Control Problems with Application to Coordinate Measuring Machines“. In Polynomial Methods for Control Systems Design, 223–51. London: Springer London, 1996. http://dx.doi.org/10.1007/978-1-4471-1027-9_6.

Der volle Inhalt der Quelle
APA, Harvard, Vancouver, ISO und andere Zitierweisen
5

Zaman, M., K. Kleineidam, L. Bakken, J. Berendt, C. Bracken, K. Butterbach-Bahl, Z. Cai et al. „Methodology for Measuring Greenhouse Gas Emissions from Agricultural Soils Using Non-isotopic Techniques“. In Measuring Emission of Agricultural Greenhouse Gases and Developing Mitigation Options using Nuclear and Related Techniques, 11–108. Cham: Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-55396-8_2.

Der volle Inhalt der Quelle
Annotation:
AbstractSeveral approaches exist for measuring greenhouse gases (GHGs), mainly CO2, N2O, and CH4, from soil surfaces. The principle methods that are used to measure GHG from agricultural sites are chamber-based techniques. Both open and closed chamber techniques are in use; however, the majority of field applications use closed chambers. The advantages and disadvantages of different chamber techniques and the principal steps of operation are described. An important part of determining the quality of the flux measurements is the storage and the transportation of the gas samples from the field to the laboratory where the analyses are carried out. Traditionally, analyses of GHGs are carried out via gas chromatographs (GCs). In recent years, optical analysers are becoming increasingly available; these are user-friendly machines and they provide a cost-effective alternative to GCs. Another technique which is still under development, but provides a potentially superior method, is Raman spectroscopy. Not only the GHGs, but also N2, can potentially be analysed if the precision of these techniques is increased in future development. An important part of this chapter deals with the analyses of the gas concentrations, the calculation of fluxes, and the required safety measures. Since non-upland agricultural lands (i.e. flooded paddy soils) are steadily increasing, a section is devoted to the specificities of GHG measurements in these ecosystems. Specialised techniques are also required for GHG measurements in aquatic systems (i.e. rivers), which are often affected by the transfer of nutrients from agricultural fields and therefore are an important indirect source of emission of GHGs. A simple, robust, and more precise methodof ammonia (NH3) emission measurement is also described.
APA, Harvard, Vancouver, ISO und andere Zitierweisen
6

Camacho, A. A., und F. J. Martínez-Serrano. „Application of Optomecatronics Load Cell for Measuring Work Force and Efforts in Industrial Machinery“. In Emerging Challenges for Experimental Mechanics in Energy and Environmental Applications, Proceedings of the 5th International Symposium on Experimental Mechanics and 9th Symposium on Optics in Industry (ISEM-SOI), 2015, 211–14. Cham: Springer International Publishing, 2016. http://dx.doi.org/10.1007/978-3-319-28513-9_29.

Der volle Inhalt der Quelle
APA, Harvard, Vancouver, ISO und andere Zitierweisen
7

Castillo, Javier Rivera, Moises Rivas-Lopez, Wendy Flores-Fuentes, Oleg Sergiyenko, Julio Cesar Rodríguez-Quiñonez und Daniel Hernandez-Balbuena. „Machine Vision Optical Scanners for Landslide Monitoring“. In Developing and Applying Optoelectronics in Machine Vision, 206–35. IGI Global, 2017. http://dx.doi.org/10.4018/978-1-5225-0632-4.ch007.

Der volle Inhalt der Quelle
Annotation:
An application of landslide monitoring using optical scanner as vision system is presented. The method involves finding the position of non-coherent light sources located at strategic points susceptible to landslides. The position of the light source is monitored by measuring its coordinates using a scanner based on a 45° sloping surface cylindrical mirror. This chapter also provides a background about the concept of landslides and technologies for monitoring. finally, the results of experiments of position light source monitoring in laboratory environment using the proposed method are presented.
APA, Harvard, Vancouver, ISO und andere Zitierweisen
8

Miranda-Vega, Jesús Elias, Javier Rivera-Castillo, Moisés Rivas-López, Wendy Flores-Fuentes, Oleg Sergiyenko, Julio C. Rodríguez-Quiñonez und Daniel Hernández-Balbuena. „Reducing the Optical Noise of Machine Vision Optical Scanners for Landslide Monitoring“. In Examining Optoelectronics in Machine Vision and Applications in Industry 4.0, 103–33. IGI Global, 2021. http://dx.doi.org/10.4018/978-1-7998-6522-3.ch004.

Der volle Inhalt der Quelle
Annotation:
An application of landslide monitoring using optical scanner as vision system is presented. The method involves finding the position of non-coherent light sources located at strategic points susceptible to landslides. The position of the light source is monitored by measuring its coordinates using a scanner based on a 45° sloping surface cylindrical mirror. This chapter shows experiments of position light source monitoring in laboratory environment. This work also provides improvements for the optical scanner by using digital filter to smooth the opto-electronic signal captured from a real environment. The results of these experiments were satisfactory by implementing the moving average filter and median filter.
APA, Harvard, Vancouver, ISO und andere Zitierweisen
9

Dvoynishnikov, Sergey Vladimirovich, und Vladimir Genrievich Meledin. „Optoelectronic Differential Cloudy Triangulation Method for Measuring Geometry of Hot Moving Objects“. In Optoelectronics in Machine Vision-Based Theories and Applications, 49–78. IGI Global, 2019. http://dx.doi.org/10.4018/978-1-5225-5751-7.ch003.

Der volle Inhalt der Quelle
Annotation:
The new differential cloudy triangulation method for quick and precise measurement of thickness of hot dynamic objects is proposed. The method is based on laser cloudy triangulation, used in the synchronous differential mode. The experimental model of the laser system for thickness measurements, which implements the proposed method, has been developed. Laboratory and industrial tests of the laser system have been performed. They confirm efficiency and possibilities of differential cloudy triangulation in metallurgy. The differential cloudy triangulation method may be used for geometry measurement of hot dynamic objects in a wide range of strong optical refractions in media.
APA, Harvard, Vancouver, ISO und andere Zitierweisen
10

Lingelbach, Katharina, Sabrina Gado und Wilhelm Bauer. „Neuro-adaptive tutoring systems - Neurophysiological-based recognition of affective-emotional and cognitive states of learners for intelligent neuro-adaptive tutoring systems“. In Competence development and learning assistance systems for the data-driven future, 243–60. Goto Verlag, 2021. http://dx.doi.org/10.30844/wgab_2021_15.

Der volle Inhalt der Quelle
Annotation:
Monitoring learners’ mental states via a passive Brain-Computer Interface (BCI) allows to continuously estimate current abilities, available cognitive resources, and motivation. It bears the great potential to adapt educational contents, learning speed, and format to the learner’s needs via an intelligent tutoring system. We present a neurophysiological-based approach to continuously monitor learners’ current affective-emotional and cognitive states by measuring and decoding brain activity via a passive BCI. In two studies (N = 8 and N = 7), we investigate whether we can a) predict learners’ affective and cognitive states during a learning or training session, b) provide continuous feedback of recognized states to the learner and, thereby, c) increase performance and intrinsic motivation. Oscillatory power measures in the alpha (8 – 12 Hz) and theta (4 – 7 Hz) frequency band served as features for the prediction and visualization. Our results reveal that machine learning algorithms can distinguish different states of cognitive workload and affect. The approach contributes to the development of closed-loop neuro-adaptive tutoring systems which allow to monitor learners’ states, provide feedback, and adapt their parameters for an optimal learner-training fit and effective and positive learning experience.
APA, Harvard, Vancouver, ISO und andere Zitierweisen

Konferenzberichte zum Thema "Optical measuring machine"

1

Sun Huan-Xiang und Zhang Ping. „Measuring mould boundary by optical scanners and three coordinate measuring machine“. In 2010 International Conference on Computer, Mechatronics, Control and Electronic Engineering (CMCE 2010). IEEE, 2010. http://dx.doi.org/10.1109/cmce.2010.5610085.

Der volle Inhalt der Quelle
APA, Harvard, Vancouver, ISO und andere Zitierweisen
2

Meier, N., und A. Georgiadis. „P5.2 - Optical part measuring inside a milling machine“. In AMA Conferences 2013. AMA Service GmbH, Von-Münchhausen-Str. 49, 31515 Wunstorf, Germany, 2013. http://dx.doi.org/10.5162/sensor2013/p5.2.

Der volle Inhalt der Quelle
APA, Harvard, Vancouver, ISO und andere Zitierweisen
3

Wagner, Michael. „Design of a measuring machine for optical filters“. In Eighth European Seminar on Precision Optics Manufacturing, herausgegeben von Alexander Haberl, Gerald Fütterer, Oliver W. Fähnle und Rolf Rascher. SPIE, 2021. http://dx.doi.org/10.1117/12.2594445.

Der volle Inhalt der Quelle
APA, Harvard, Vancouver, ISO und andere Zitierweisen
4

Minoni, Umberto, Franco Docchio, Silvano Biazzi, Pietro Brusaferri und Giovanni Scotti. „Flexible measuring machine based on a double interferometer“. In Optical Tools for Manufacturing and Advanced Automation, herausgegeben von Kevin G. Harding und H. Philip Stahl. SPIE, 1993. http://dx.doi.org/10.1117/12.162102.

Der volle Inhalt der Quelle
APA, Harvard, Vancouver, ISO und andere Zitierweisen
5

Khan, Abdul Wahid, und Wuyi Chen. „Squareness perpendicularity measuring techniques in multiaxis machine tools“. In 4th International Symposium on Advanced Optical Manufacturing and testing technologies: Optical Test and Measurement Technology and Equipment, herausgegeben von Yudong Zhang, James C. Wyant, Robert A. Smythe und Hexin Wang. SPIE, 2009. http://dx.doi.org/10.1117/12.828603.

Der volle Inhalt der Quelle
APA, Harvard, Vancouver, ISO und andere Zitierweisen
6

Kramar, John, Jau-Shi J. Jun, William B. Penzes, Fredric Scire, E. Clayton Teague und John S. Villarrubia. „Grating pitch measurements with the molecular measuring machine“. In SPIE's International Symposium on Optical Science, Engineering, and Instrumentation, herausgegeben von Fernando L. Podio. SPIE, 1999. http://dx.doi.org/10.1117/12.371144.

Der volle Inhalt der Quelle
APA, Harvard, Vancouver, ISO und andere Zitierweisen
7

Petersen, Ralph, und Hendrik Rothe. „Development problems of a nanometer coordinate measuring machine (NCMM)“. In International Symposium on Optical Science and Technology, herausgegeben von Zu-Han Gu und Alexei A. Maradudin. SPIE, 2000. http://dx.doi.org/10.1117/12.401663.

Der volle Inhalt der Quelle
APA, Harvard, Vancouver, ISO und andere Zitierweisen
8

Petersen, Ralph, Hendrik Rothe und Dorothee Huser. „Large AFM scans with a Nanometer Coordinate Measuring Machine“. In International Symposium on Optical Science and Technology, herausgegeben von Angela Duparr‰ und Bhanwar Singh. SPIE, 2002. http://dx.doi.org/10.1117/12.451749.

Der volle Inhalt der Quelle
APA, Harvard, Vancouver, ISO und andere Zitierweisen
9

Qiu, Jianxin, Liang Tan und Xiaodong Xu. „3-D measuring of engine camshaft based on machine vision“. In International Conference of Optical Instrument and Technology, herausgegeben von Shenghua Ye, Guangjun Zhang und Jun Ni. SPIE, 2008. http://dx.doi.org/10.1117/12.806895.

Der volle Inhalt der Quelle
APA, Harvard, Vancouver, ISO und andere Zitierweisen
10

Thurston, Debra L., und Alexander H. Slocum. „Kinematic Transmission Design For The Atomic Resolution Measuring Machine (ARMM)“. In OPTCON '88 Conferences--Applications of Optical Engineering, herausgegeben von Thomas C. Bristow und Alson E. Hatheway. SPIE, 1989. http://dx.doi.org/10.1117/12.950974.

Der volle Inhalt der Quelle
APA, Harvard, Vancouver, ISO und andere Zitierweisen

Berichte der Organisationen zum Thema "Optical measuring machine"

1

Jacobs, Stephen D. Coordinate Measuring Machine for Characterizing Conformal Optics. Fort Belvoir, VA: Defense Technical Information Center, April 2001. http://dx.doi.org/10.21236/ada393371.

Der volle Inhalt der Quelle
APA, Harvard, Vancouver, ISO und andere Zitierweisen
Die Auswahlen zum Thema "Optical measuring machine" für konkrete Quellenarten können Sie auch interessieren:
Zeitschriftenartikel
Wir bieten Rabatte auf alle Premium-Pläne für Autoren, deren Werke in thematische Literatursammlungen aufgenommen wurden. Kontaktieren Sie uns, um einen einzigartigen Promo-Code zu erhalten!

Zur Bibliographie