Einloggen

Thematische Bibliographien / Měření parametrů na vedení / Dissertationen

Um die anderen Arten von Veröffentlichungen zu diesem Thema anzuzeigen, folgen Sie diesem Link: Měření parametrů na vedení.

Dissertationen zum Thema „Měření parametrů na vedení“

Autor: Grafiati

Veröffentlicht am 28. Juni 2021

Zuletzt aktualisiert am 3. Februar 2022

Geben Sie eine Quelle nach APA, MLA, Chicago, Harvard und anderen Zitierweisen an

Wählen Sie eine Art der Quelle aus:

Machen Sie sich mit Top-50 Dissertationen für die Forschung zum Thema "Měření parametrů na vedení" bekannt.

Neben jedem Werk im Literaturverzeichnis ist die Option "Zur Bibliographie hinzufügen" verfügbar. Nutzen Sie sie, wird Ihre bibliographische Angabe des gewählten Werkes nach der nötigen Zitierweise (APA, MLA, Harvard, Chicago, Vancouver usw.) automatisch gestaltet.

Sie können auch den vollen Text der wissenschaftlichen Publikation im PDF-Format herunterladen und eine Online-Annotation der Arbeit lesen, wenn die relevanten Parameter in den Metadaten verfügbar sind.

Sehen Sie die Dissertationen für verschiedene Spezialgebieten durch und erstellen Sie Ihre Bibliographie auf korrekte Weise.

1

Benešl, Lukáš. „Vliv fyzických parametrů a stáří silnoproudého vedení na výkonnost a spolehlivost PLC/BPL“. Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2020. http://www.nusl.cz/ntk/nusl-413002.

Der volle Inhalt der Quelle

Annotation:

BPL technology is quite widespread nowadays and the public is also somewhat aware of it. This technology can be used as a means of communication without the need to install additional media and thus use the existing infrastructure. In an effort to use the full potential of the technology, BPL communication began to be used to monitor the current state of cables in distribution networks online. Where the technology is already fully implemented, the distributor can use the data to evaluate the current situation. In this way, BPL technology can be used as a diagnostic tool to test the quality of a cable connection on which not only time but also humidity and other external influences could have a significant effect.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

2

Tobolka, Lukáš. „Problematika návrhu síťové infrastruktury“. Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2021. http://www.nusl.cz/ntk/nusl-442356.

Der volle Inhalt der Quelle

Annotation:

The aim of this diploma thesis is to look at the design of network infrastructure in practice. There are individual procedures, brands, standards that must be followed when designing. It includes a brief general overview of terminal elements, cable systems and related matters. In general, methods for measuring optical lines and parameters for measuring metallic networks are described here. The possible complications that accompany it are briefly described in the implementation. The network design methodology is also described here on the example of a specific object. Before the actual handover of the work, the entire infrastructure is analyzed and measured with output protocols within the certification of the entire system together with outputs in the form of a measurement protocol.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

3

Pokorný, Pavel. „Měření parametrů pneumatik“. Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2012. http://www.nusl.cz/ntk/nusl-230137.

Der volle Inhalt der Quelle

Annotation:

It is the tyre that ensures the interaction between a wheel and road surface and it is the the tyre which also acts as a primary cushioning. Its construction, features and condition highly influence driving properties of a car and thus passenger safety as well. In motorsports the tyre is a key part of the vehicle and therefore it is necessary to make use of its complete potential for reaching the best results. The aim of this thesis is a device construction suitable for tyre parameter and their characteristics measurement. The next task is to design a measuring system for tyre pressure and temperature monitoring. With using of these devices a few real-tyre measurements and subsequent result evaluation will be done. The output of the thesis is an overview of construction details, overview of selected tyre parameters, design and drawing documentation of multipurpose measuring device and the results of my measurements.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

4

Hlavatý, Radek. „Měření parametrů ultrazvukového svazku“. Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2021. http://www.nusl.cz/ntk/nusl-442538.

Der volle Inhalt der Quelle

Annotation:

The work deals with methods of measuring the parameters of the ultrasonic beam generated by piezoelectric sensors. The theoretical part contains a literature search of methods for the analysis of the ultrasonic beam generated by piezoelectric transducers with dimensions of units of millimeters. The problematics of measurement using piezoelectric or optical fiber hydrophones is investigated in more detail. The scope of the practical part of the work is the design and implementation of measuring equipment that allows spatial analysis of the beam during propagation by a complicated signal path, for automotive level and concentration sensors of the company Vitesco Technologies s.r.o. The system uses a hydrophone method to measure the ultrasonic beam. Due to test measurements, the repeatability of the measured results is confirmed, the results are discussed in the end.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

5

Fialka, Jiří. „Měření parametrů piezoelektrických materiálů“. Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2009. http://www.nusl.cz/ntk/nusl-217770.

Der volle Inhalt der Quelle

Annotation:

The master’s thesis deals with the piezoelectric coefficients, the resonance frequency and especially the piezoelectric constants verification. With the assistance of several devices, for instance LCR-meter HIOKI 3532, impedance analyzer Agilent 4294A and LCR-meter Agilent E4980A, the resonance and the anti-resonance frequencies as well as impedance and capacitance of samples are measured. The paper opens with the theory of the piezoelectric phenomenon and the difference between direct and indirect piezoelectric phenomenon, it also describes the basic behaviour of a piezoelectric ceramic element during mechanical straining or applied voltage. Further, the paper concerns the description of various piezoelectric constants and their calculations. Subsequent part of the paper is devoted to the temperature dependence of the main piezoelectric parameters of PZT ceramics. The materials coefficients are delineated as a function of temperature of the piezoelectric charge coefficients dij, relative permittivity r, electromechanical coupling factor kij and frequency constants Ni. One of the chapters also determines the piezoelectric charge constant d33 of PZT ceramics by laser interferometer and compares it with the value measured by resonance methods. The surface displacement was measured by a single-beam interferometer Polytec OFV-5000. The results of measurements of piezoelectric charge coefficients d33 acquired by the first and the second method are identical. The last section of the paper is focused on different methods of experimental studies on the characteristics of heat transfer by diffusing heat through conduction between the silver-plated surface of cylinder made of PZT ceramics. The effect on the resonance and the anti-resonance frequencies is monitored. There after, the real heat, determined by thermo camera and the physical model of heat transfer created in program COMSOL Multiphysics, is analysed.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

6

Vrábel, Miroslav. „Měření parametrů laserových svazků“. Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2011. http://www.nusl.cz/ntk/nusl-219097.

Der volle Inhalt der Quelle

Annotation:

his paper discusses the characteristics of laser radiation. Introduces the theory and in quite a description of the laser beam. To this end, experiments were compiled to measure the geometric and performance parameters, polarization and coherence. Emphasis is placed on the interdependence of the various parameters of laser radiation

APA, Harvard, Vancouver, ISO und andere Zitierweisen

7

Wintr, Aleš. „Měření parametrů optických čoček“. Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2011. http://www.nusl.cz/ntk/nusl-219103.

Der volle Inhalt der Quelle

Annotation:

This paper contains a basic overview and description of optical lenses. It introduces different types of optical lenses and shows how they influence the passing of light beams. It deals with the production of optical lenses and their practical use. It describes types of optical blemishes that exist in real optical systems. Particular attention is given to parameters of optical lenses and their measurement in practice. It includes a Matlab program to calculate parameters of optical lenses derived from the measurements.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

8

Kučera, Zdeněk. „Měření parametrů optických spojů“. Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2014. http://www.nusl.cz/ntk/nusl-220660.

Der volle Inhalt der Quelle

Annotation:

Communication via fiber optical cable (links) is the latest advancement of the transmission media currently used for data transmission. Despite initial problems, using of this medium in recent years has greatly expanded due to their indisputable advantages. Optical cable is a great combination of reliability and security of data transfer. Its constantly improving transmission parameters contribute to the high speeds in the long-distance transmission of data. In the theoretical part of this work some kinds of optical cables are mentioned, also the most important parameters and the most widely used methods of measurement of these cables. Apart from that other methods of joining optical cables and the most used types of optical cables are also mentioned. The values of the decline and reflection, which are led into the device after connecting these parts into the optical lines. The device using the measuring method of the reverse reflection is also described in this thesis altogether with its most important parts and the way of the display of the measured track on the graphic image of the device. The problematics of identification and decline dead zone and the factors influencing the lenght of dead zone – the ability to identify two independent events on the link patchcord of the variable lenght, is also described in details in this thesis. In the practical part a series of measurements and evaluation (numerical and graphical) of the measured values of decline lenghts and identificating dead zones of the OTDR device will be carried out.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

9

Rücker, Jan. „Měření hmotnostních parametrů vozidel“. Master's thesis, Vysoké učení technické v Brně. Ústav soudního inženýrství, 2012. http://www.nusl.cz/ntk/nusl-232657.

Der volle Inhalt der Quelle

Annotation:

This thesis is the first part deals with methods of determining weight parameters of vehicles. By measuring the position of center of gravity and inertia measurements. In the second part focuses on the measurement of gravity position in a selected group of vehicles Škoda and their comparison between vehicles and comparison with simulation programs PCcrach and Virtual crach.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

10

Becová, Lucia. „Měření parametrů lidského operátora“. Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2019. http://www.nusl.cz/ntk/nusl-400558.

Der volle Inhalt der Quelle

Annotation:

This work focuses on evaluating the parameters of the human operator as the driver of the vehicle simulator. In the first part, the thesis focuses on the examination of human operator parameters evaluation. In the second part of the thesis is a proposal of various scenarios focused on a specific area of measurement. At the end, the work focuses on the processing and evaluation of measured data obtained from the drivers tested.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

11

Beneš, Jiří. „Měření parametrů GNSS přijímačů“. Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2020. http://www.nusl.cz/ntk/nusl-413203.

Der volle Inhalt der Quelle

Annotation:

Goal of this thesis is to propose and realize a viable method to determine static a dynamic parameters of GNSS receivers. Thesis begins with research of GNSS, foremostly determining position and associated uncertainties of measurement. Following chapter contains research of GNSS receivers, data flow and methods of evaluating parameters of such measurements. Summary of obtained information is then used to schedule measurements, assemble experiment and create evaluating metrics. Main selected evaluating metric is weighted histogram of deviations with extended information. Aplication of proposed metrics onto measurements of GNSS receivers augments available information of GNSS receiver accuracy for whole range of values. This metrics also supplies additional statistical information about course of measurement.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

12

Mader, Daniel. „Měření výkonových parametrů zážehových motorů“. Master's thesis, Česká zemědělská univerzita v Praze, 2016. http://www.nusl.cz/ntk/nusl-259049.

Der volle Inhalt der Quelle

Annotation:

This thesis describes the various methods for measuring the performance parameters of petrol engines and on the selected engine (car) evaluate their accuracy with regard to the economic complexity of the methods. In the first part of this thesis is described construction of combustion engines, explained the importance of individual performance parameters (power, torque, specific fuel consumpti-on) and characteristics combustion engines. This section, however, is focused on the issue of performance measurement, using both static and dynamic methods of measurement. The second part examined the various methods of measurement in practice on selected engine (car) with an assessment of their advantages and disadvantages and the financial cost of the-ir implementation.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

13

Medek, Pavel. „Měření základních parametrů plynových filtrů“. Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2010. http://www.nusl.cz/ntk/nusl-218712.

Der volle Inhalt der Quelle

Annotation:

This master’s thesis deals with establishment of parameters of the PPI filter material using methods of image analysis. The first part is aimed at general methods used in practice, an overview of splitting into filter clasification and characterization of the PPI filter material. The second part represents an introduction to problems of machine vision. There are outlined basic methods of image processing. Last parts of the thesis study the method using detection of bright light levels. The measurement and interpretation of results is performed with the PPI material - types 10/6 and 10/12. For image processing is used the MATLAB program, version 7.0.1.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

14

Ripper, David. „Měření kvalitativních parametrů datových sítí“. Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2016. http://www.nusl.cz/ntk/nusl-242161.

Der volle Inhalt der Quelle

Annotation:

The aim of this thesis was studying and describing known methods for testing transmission parameters in data networks based on protocol stack TCP/IP. Firstly were individual transmission parameters specified and determined their impact on service quality. Another aim was to carry out a comparison of the different methodologies of measurement of transmission parameters, performed their qualifications on the basis of these findings and methodology for measuring service quality from the user's perspective was proposed. It was a web application where users measured basic transmission parameters, then the users judged videos according to the evaluation scale MOS (Mean Opinion Score) and with the help of these data was analysis, classification connection and impact of connection on MOS evaluation.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

15

Dvořák, Marek. „Metody měření výkonových parametrů vznětových motorů“. Master's thesis, Česká zemědělská univerzita v Praze, 2016. http://www.nusl.cz/ntk/nusl-259132.

Der volle Inhalt der Quelle

Annotation:

The thesis deals with the performance measurement of tractor engine through four used different methods. In the first theoretical part of thesis is analysis engine design with its main groups and the second part explains methods of measuring performance and measuring equipment. In the practical part of thesis is the explained methodology of applied methods of measurement, together with their evaluation. The first applied method is performance measurement on the dynamometer, the second method is measurement of these parameters during free acceleration, the third method is measurement of parameters during free acceleration with load and fourth method is measurement of parameters using GPS. In conclusion of this part is to compare the results of each used measurement methods between themselves and the conclusions drawn from it.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

16

Jurčík, Petr. „Automatizované pracoviště pro měření parametrů zesilovačů“. Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2011. http://www.nusl.cz/ntk/nusl-219316.

Der volle Inhalt der Quelle

Annotation:

The aim of this work is to create an automated workplace for measuring the basic parameters of audio amplifiers using a graphical programming environment LabVIEW. Subsequently, the functionality will be verified in practical measurements on the real amplifier.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

17

Nekovář, Martin. „Výpočet a měření parametrů asynchronních motorů“. Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2012. http://www.nusl.cz/ntk/nusl-219752.

Der volle Inhalt der Quelle

Annotation:

The theme of this master´s thesis is calculation and measurement of the parameters of induction motor. The thesis is divided into several parts. The first and the second part describes the general construction and operating principle of asynchronous motors. The construction includes a description of each part of induction motor, which consists of stator and rotor. The thesis deals with three-phase symmetrical and asymmetric single-phase motors. Principle of operation with using the rotating magnetic field, which is circular at three-phase motors, single phase motors have field elliptical shape. The next part contains the motor replacement scheme. The fourth part contains the calculation of motor´s parameters through the formulas. In this part the procedures for obtaining parameters of the replacement scheme of induction motor are defined. The process of calculating the parameters of the motor replacement scheme of threephase asynchronous motor is created according to given documentation is the next part for the certain type. The next content of the thesis describe finite element method, simulation and measurement of asynchronous motors to get of parameters from no-load and short-circuit test. The comparison of the results from measurement, analytical calculation and from simulation is given in the last chapter.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

18

Knebl, Martin. „Metody měření parametrů ve tváření kovů“. Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2010. http://www.nusl.cz/ntk/nusl-229096.

Der volle Inhalt der Quelle

Annotation:

This master’s thesis deals with the problem of measurement for thermomechanical parameters during metal forming under higher deformation rate. The first part works up general literary studies, comprising a summary of measurement methods for required parameters. There is described a principle of their function and usage. Further assessed the current situation and recommendation of appropriate methods for the dynamic processes of forming, especially their testing. The second part is devoted to the measurement for dynamic features of the material. This is a problem specified by Split Hopkinson preassure bar test. The test is described, including the mathematical evaluation process, in the theoretical part. In the practical part, there is a detailed description of the process and evaluation of the real test with aluminum alloy AlMg4, 5Mn ,07-EN AW 5083 performed within the framework of the junior project.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

19

Beneš, Pavel. „Měření základních parametrů optických a optoelektronických komponent“. Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2021. http://www.nusl.cz/ntk/nusl-442446.

Der volle Inhalt der Quelle

Annotation:

This diploma thesis deals with optical and optoelecronic components. The first part of the work describes the optical paths and methods of their measurement. The second part describes the coupler, circulator and isolator. Further described is a laser diode, a photodetector and a modulator. The third part describes the measurement procedure of the coupler, circulator, isolator, laser diode, photodetector and modulator. The measured values are compared with the catalog values.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

20

Šeda, Pavel. „Měření parametrů datových přenosů v počítačových sítích“. Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2008. http://www.nusl.cz/ntk/nusl-217300.

Der volle Inhalt der Quelle

Annotation:

Master‘s thesis is focused on basic characteristics of data transmissions in computer networks. In forepart I digestedly described basic characteristics computer networks, metods of their measurement and valuation. Computer networks type LAN as well as wireless computer networks Wifi, are mentioned. In second part I realized my own proposition of basic characteristics measurement. This proposition is used for SW applications development. Main goal of these applications is measurement of packet delay, packet jitter, paket loss and available bandwidth. I described details of SW applications and realized measurement of real computer networks in the end.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

21

Černý, Michal. „Optimalizace a měření parametrů PON sítě FTTx“. Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2011. http://www.nusl.cz/ntk/nusl-218961.

Der volle Inhalt der Quelle

Annotation:

Práce rozebírá současný vývoj na poli pasivních optických sítí a jednotlivé generace přenosových standardů. Podrobněji se zabývá parametry ODN, metodami jejich měření a volbou potřebných měření v praxi. Hlavní část práce je zaměřena na měření pasivního WDM prvku, kde je provedena analýza vstupů a výstupů, měření vložného útlumu a přelechů podle ORL na provozních vlnových délkách.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

22

Novák, Ondřej. „Měření parametrů síťového provozu na přístupovém bodě“. Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2011. http://www.nusl.cz/ntk/nusl-218987.

Der volle Inhalt der Quelle

Annotation:

This master’s thesis focuses on the issue of measurement of parameters of network traffic of wired and wireless networks. The first part theoretically describes SNMP protocol and application interface API, that form the basis for acquiring and evaluating data. The next section describes known MIKROTIK platform and software solutions for the alternative possibility of implementing a new feature. The last part closely describes the created application. It is a simple information system, whose task is to get information and evaluate it using the known functions. The conclusion of the work is a few tests of this application, assessing the real operation.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

23

Helia, Petr. „Měření parametrů větru na palubě malého letadla“. Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2017. http://www.nusl.cz/ntk/nusl-318746.

Der volle Inhalt der Quelle

Annotation:

This diploma thesis examines the influence of wind on civil aviation safety. Author investigates the methods of wind measuring on board of small airplane and identifies the most common individual errors.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

24

Schrötter, Ján. „Měření parametrů axiálních ložisek 2D triangulační technikou“. Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2018. http://www.nusl.cz/ntk/nusl-377002.

Der volle Inhalt der Quelle

Annotation:

The goal of this diplma thesis is to design a system for axial bearings parameter measurement. The system uses principles of 2D active optical triangulation. The system will have a capability of compensating error caused by refraction on preservative oil layer, which the bearings are covered in.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

25

Burda, Jan. „Návrh a měření parametrů akustických difúzních prvků“. Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2018. http://www.nusl.cz/ntk/nusl-377009.

Der volle Inhalt der Quelle

Annotation:

This work focuses on the issue of acoustic diffusers. The introductory chapter describes the necessary theory of the sound distribution through enclosed space. Acoustic fields are also described. A description of the different diffusion element types and theirs design methods follows. It focuses mainly on design, which uses pseudo-random mathematical sequences. The aim of the work is to produce several types of acoustic diffusors and to verify their diffusion properties by means of measurements. The work uses the AFMG Reflex to simulate the diffusion properties of the proposed elements. Further, the thesis contains a description of the diffusion properties measurement process by the boundary plane method and the process of evaluating the measured data using the Matlab program.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

26

Kopecký, Jan. „Určení kinetických parametrů reakcí pomocí DSC měření“. Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2018. http://www.nusl.cz/ntk/nusl-378413.

Der volle Inhalt der Quelle

Annotation:

The master thesis deals with DSC measurments a calculation of kinetic parameters. In the theoretical part, iron alotropy is briefly described, followed by a description of the DSC analysis itself. The thesis also includes division and derivation of isoconversional methods for calculating the activation energy. In the experimental part, a series of measurments is perfomed on pure iron prepared by Cold Spray method. In the paper the influence of deformation on the Curie temperature of the magnetic transformation in -Fe and transformation > is investigated. The activation energy is calculated for transformation > for different degrees of deformation. The degree of deformation is monitored by channeling contrast.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

27

Horňáková, Veronika. „Měření parametrů optických a opto-elektrických komponent“. Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2020. http://www.nusl.cz/ntk/nusl-413000.

Der volle Inhalt der Quelle

Annotation:

This diploma thesis deals with optical and optoelectronic components. The first part describes three selected optical and three optoelectronic components. Optical components include power divider, isolator and circulator. The optoelectronic ones are laser diode, photodetector and modulator. Basic measurement parameters were defined for each component. In the experimental part, four components from different manufacturers were measured. Selected components are power dividers, isolators, circulators and a laser diode. Subsequently, the measured parameters were compared with the catalog values.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

28

Sukup, Luboš. „Metody měření výkonnostních a kvalitativních parametrů datových sítí“. Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2013. http://www.nusl.cz/ntk/nusl-264927.

Der volle Inhalt der Quelle

Annotation:

Master thesis involves the development of quality measurement issues and performance parameters in data networks. It describes the main technologies as they affect the quality and performance parameters and the effect of these parameters for voice, video and data services. Next are listed some methods for measuring parameters of the data network.In the practical part is selected one method of measuring network parameters and properties of this method are demonstrated by illustrative examples.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

29

Byrtus, David. „Osvětlovací LED modul pro bezkontaktní měření fyziologických parametrů“. Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2016. http://www.nusl.cz/ntk/nusl-242099.

Der volle Inhalt der Quelle

Annotation:

This thesis describes the design of the illumination LED module for contactless measurement of basic physiological parameters. Contactless methods is based on the fotopletysmografických methods. The acquisition parameters used video camera for monitoring body part of the patient. Designed lighting LED module is used to enhance the optical signal with respect to quantum efficiency of the camera used. The acquired video sequences are then programmatically processed, analyzed, and the result is an estimate of the measured parameter.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

30

Drábek, Jakub. „Měření parametrů polarizovaného světla na výstupu optovláknového senzoru“. Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2018. http://www.nusl.cz/ntk/nusl-376938.

Der volle Inhalt der Quelle

Annotation:

This master's thesis deals with the analysis of the optical power measurement using an optical fiber sensor. The thesis contains the theoretical background to understand the origin of polarization and its representation in space using Poincaré’s sphere and Stokes vectors. There is also a part describing optical performance measurement and the preview of analog measurements from various researches. Practical part focuses on verification of changes of fiber sensor parameters at temperature change in its surroundings and this part includes also additional suggestions for various types of measurements and verification of the function of the photodiode as an optical power transducer. Most measurements are based on the comparison of results obtained with the polarimeter. The results were plotted and discussed.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

31

Fialka, Jiří. „Měření parametrů piezoelektrických aktivních prvků snímačů akustické emise“. Doctoral thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2015. http://www.nusl.cz/ntk/nusl-234413.

Der volle Inhalt der Quelle

Annotation:

The doctoral thesis discusses the measurement of parameters of piezoelectric (PZT) materials and the influence of temperature on their stability. In the introductory sections, the author briefly explains the piezoelectric effect and its use; simultaneously, methods for the preparation of piezoelectric materials and the measurement of their properties are presented to illustrate the analyzed problem. The experimental part of the thesis describes the procedure of measuring and calculating the complete matrix of material coefficients from samples of PZT ceramics. The applied set of piezoelectric samples complying with relevant European and world standards was made in the form of thin plates, thin discs and cylinders, via gradual modification of the large disc. The NCE51 and/or the older PCM51 ceramics obtained from the company Noliac Ceramics were used in determining the complete matrix and describing the measurement method. Both these types are soft piezoceramics composed from a solid solution of lead zirconate and lead titanate with the general chemical formula of Pb(Zr1-x,Tix)O3. The real crystallographic structure and chemical composition of the samples were confirmed by X-ray diffraction spectroscopy and energy dispersive spectroscopy (EDS), respectively. The frequency method was used for the measurement and calculation of all material coefficients. An Agilent 4294A impedance analyzer and a set of measuring tweezers marketed as “Tweezers Contact Test Fixture 16334A” were used in the process. Fast determination of the entire matrix of coefficients without any special requirement for the preparation of the samples to be measured was tested and verified. The charge coefficients of the piezoelectric material were confirmed by direct methods including the laser interferometer technique, the vibrometric method, and the procedure utilizing changes of the force applied to the sample. The advantages and disadvantages of the methods were compared and defined based on measurements and their results. The main part of thesis was focused on the behavior of piezoelectric material at high temperatures near the Curie point. Depolarization performed by means of a high temperature approaching the Curie point constitutes a significant yet hardly measurable material property of PZT ceramics. Commonly available vibrometric methods (d33-meters) do not appear to be suitable for the measurement of temperature dependencies, and for that reason the frequency technique was used. The piezoelectric charge coefficient, whose value can be effectively measured via the above-discussed frequency method, was selected as the indicator showing the depolarization state in the applied piezoelectric ceramics. The accuracy of the procedure was verified via comparison of the vibrometric method in cylinders of the NCE51 ceramics with different sizes, which are designed for the longitudinal length mode. The result is an optimized measurement methodology which facilitates accurate determination of the Curie temperature, namely phase transition to the cubic crystallographic structure. The experiment also proved the applicability of progressive, controlled depolarization of PZT ceramics via high temperature, and it also enabled us to define the temperature limits at which there occur irreversible changes of the piezoelectric properties of piezoceramics. In the measured NCE51 and PCM51 materials, the limit for the irreversible changes was equal to 95% of the Curie temperature.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

32

Kumičák, Ivan. „Měření elektrických parametrů vysokonapěťových komponentů pomocí elektronického můstku“. Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2019. http://www.nusl.cz/ntk/nusl-400582.

Der volle Inhalt der Quelle

Annotation:

The main idea of this thesis is measurements of dielectric materials by using a device Tettex. The thesis is about basic physic properties of dielectric materials. The determination of a dielectric material is considered. The behavior of these materials in electrical fields and reasons, those can have an influence on it, are considered as well. In the text are described measuring methods of chosen parameters of dielectric materials by device Tettex and its functional principles. There are an evaluation of measurements, which were done, and a discussion about achieved results.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

33

Pecháček, Libor. „Optimalizace parametrů akvizice MR signálu pro měření malých objektů“. Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2010. http://www.nusl.cz/ntk/nusl-218233.

Der volle Inhalt der Quelle

Annotation:

The subject of my thesis is a design of the methods optimizing, the acquisition of MR signals when small objects measure. The thesis is divided into several parts in order to give a deeper knowledge of the problem. The first part focuses on the theory associated with NMR (Nuclear Magnetic Resonance) and SNR (signal-to-noise ratio). The practical verification of the theory follows. The conclusion of this work is focused on MR images filtering by use of wavelet transform to suppress a noise in the image. The method optimization of MR acquisition parameters for the measurement of small objects is then distributed to the entire work.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

34

Harčarík, Matej. „Měření parametrů textury povrchu výrobků kontaktní a bezkontaktní metodou“. Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2016. http://www.nusl.cz/ntk/nusl-241687.

Der volle Inhalt der Quelle

Annotation:

This master’s thesis includes an overview of profile method of surface texture evaluation according to ISO standards and VDA automotive standards, as well as an overview of areal method according to ISO 25178 standard series, which includes a proposal for improvement of czech terminology. Suitability of application of selected measurement methods for measurement of a portfolio of automotive parts was evaluated based on measurements carried out using a contact profiler, a coherence scanning interferometer and a confocal microscope. Further recommendations for practice in surface texture metrology were also formulated. A regression analysis of the relationship between values of selected profile surface texture parameters and their areal equivalents was also performed. Its results may aid the spread of areal surface texture evaluation in the industry.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

35

Slovák, Jiří. „Implementace algoritmu pro měření parametrů energetických materiálů v obvodu FPGA“. Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2014. http://www.nusl.cz/ntk/nusl-220352.

Der volle Inhalt der Quelle

Annotation:

In the text of the master´s thesis, it is at first briefly referred about Energetic Material Measurement topic in general. Emphasis is placed especially at the description of the Velocity of Detonation and short analysis of selected measurement method. The most significant part of the paper is dedicated to the design and description of the system that was created in ISE Design Suite environment using VHDL language. The development was performed with respect to oncoming integration into the board with FPGA and A/D converters. The operation of detection algorithm which was created based on the MATLAB model was verified in the final part of the thesis by simulation of processing of real optical probe signals.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

36

Cholasta, Lukáš. „Měření a porovnání jízdních parametrů vozidel v různých jízdních režimech“. Master's thesis, Vysoké učení technické v Brně. Ústav soudního inženýrství, 2010. http://www.nusl.cz/ntk/nusl-232481.

Der volle Inhalt der Quelle

Annotation:

n this work is processed a summary of selected driving parameters of vehicles, methods of measuring and use in the automotive industry or related branch especially. This work is focused on driving tests of vehicles and measurement driving parameters of vehicles. As part of this work was done measurements parameters of vehicles driving in various driving regimes and subsequent analyse of obtained data. The result of this work is determination methodology division driving regimes and evaluation the impact of driving regimes on to ride a car in a directional curve.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

37

Komenda, Jan. „Měření parametrů přijímače pro digitální televizi DVB-T (set-top boxu)“. Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2009. http://www.nusl.cz/ntk/nusl-217812.

Der volle Inhalt der Quelle

Annotation:

The diploma thesis is focused on the measurement of selected parameters of the digital TV receiver DVB T, set top box. In the introductory part the work briefly deals with the theory of compression and transmission of the digital TV signal. Main part of the thesis contains detail information about individual circuits of the selected set top box Humax F3-FOX T and the results of measurements of individual parameters obtained from the available measuring devices. The final part of the thesis deals with the design changes necessary for creation of the external output for the signals and also with the methodology of the measurement.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

38

Charouz, Ondřej. „Metody korekce výkonových parametrů vznětového motoru“. Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2018. http://www.nusl.cz/ntk/nusl-378135.

Der volle Inhalt der Quelle

Annotation:

This diploma thesis deals with obtaining the most suitable way of correcting the influence of intake air pressure, temperature and humidity as well as correcting the influence of fuel properties (diesel fuel). These correction factors are adapted to a specific engine for military use. It is a four-stroke, diesel, turbocharged, 6-cylinder engine, PV6-K37, with a displacement of 19100 cm3. This work also deals with the creation of a methodology for the measurement of this motor at the engine station and with the treatise on current methods of power correction. The measurements were made in the premises of Excalibur Army Ltd. in Šternberk.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

39

Bartoš, Patrik. „Testování přenosových parametrů internetového připojení“. Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2021. http://www.nusl.cz/ntk/nusl-442361.

Der volle Inhalt der Quelle

Annotation:

This thesis deals with methodology for measuring transmission parameters of internet connection. The aim of the thesis is to cover and compare known methods used for testing. Based on the research then design and realize an application that will provide those kind of measurements.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

40

Šporik, Vladimír. „Využití metamateriálů pro zlepšení parametrů antén“. Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2009. http://www.nusl.cz/ntk/nusl-217793.

Der volle Inhalt der Quelle

Annotation:

The thesis is focused on the design of a planar resonant-type antenna, which exploits a proper combination of left- and right-handed properties of transmission lines. This transmission line is called CRLH TL and is based on Sievenpiper mushroom structure. Advantages of the proposed antenna concept are demonstrated by a detailed comparison of its basic properties with the properties of a conventional patch antenna.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

41

Hrubanová, Kristýna. „Databáze tepelných parametrů oblečení pro systém iHVAC“. Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2017. http://www.nusl.cz/ntk/nusl-318692.

Der volle Inhalt der Quelle

Annotation:

This diploma thesis is focused on measurement of thermal properties of clothes by thermal manikin and on application of results for prediction of thermal comfort in system iHVAC. First part of thesis is dedicated to research with relation to this topic and to definitions of main computational equations necessary for experimental measurement. The choise of method for measurement based on available standards is an important part of this thesis. The main focus of thesis lies on measuring 5 combinations of clothes at different calibration temperatures and same temperature of manikin surface. Then data are examined and also the analysis of uncertaities and repeatability is maked. According to assupmtion , the independence of value of heat transfer coefficient to ambient temperature is comfirmed and calculated heat resistance of every single clothes is compared to existing wardrobe for system iHVAC. The outcome of this thesis is specificied and completed virtual wardrobe which serves to prediction of thermal comfort in car.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

42

Musil, Libor. „Inteligentní zásuvka pro výčet elektrických parametrů a ovládání připojeného zařízení“. Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2020. http://www.nusl.cz/ntk/nusl-413096.

Der volle Inhalt der Quelle

Annotation:

Thesis deals with the design of intelligent electrical socket. At the beginning of the thesis, there are described the characteristics of the distribution network in the Czech Republic and the ways of measuring these properties. The selected integrated circuit that realizes the measurement is described in detail. The third chapter deals with the current possibilities of power management, especially from the perspective of the distribution company and the concept of smart networks. The fourth chapter deals with the selection of communication interface suitable for smart socket as an element of smart home. The selected IEEE 802.15.4 standard and the microcontroller implementing the communication itself are described in more detail. The following part of the work is about design of the intelligent socket development board, on which the concept is tested and the design of the final hardware is described in this chapter. The last chapter describes the measurement results realized by the created device.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

43

Pavloň, Martin. „Analýza dynamických parametrů laserových vibrometrů“. Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2017. http://www.nusl.cz/ntk/nusl-316221.

Der volle Inhalt der Quelle

Annotation:

This diploma thesis deals with the theoretical description of interference methods used to measure vibrations, examines main parasitic effects and analyses its contribution to achievable the resolution. In the practical part, it uses several measurements to verify the effects of the level of reflected beam, stand-off distance and speckle noise. It also proposes a practical experiment for measuring dynamic parameters and signal-noise ratio. Results show that, the noise is exponentially dependent on the level of the reflected beam. The visible maximum of the vibrometer proved to be critical in terms of time stability of the measured signal level in two of the three measurements. Results of the dynamic measurement show that, the measured deviations were not degraded or significantly disturbed by the noise signal. From the measurement of the speckle noise, it emerged that the lowest level of noise is achieved with smooth and highly reflective materials.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

44

Brabenec, Petr. „Konstrukce komparačního měřidla pro měření nástrojů“. Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2008. http://www.nusl.cz/ntk/nusl-227985.

Der volle Inhalt der Quelle

Annotation:

This work is about construction of a comparison gauge to meausure revolving tools. The gauge measures cutting and clamping parts of standard and special reamers. The gauge is unique and is designed for a company manufacturing concerete. It was designed in accordance with requirements and a prototype was tested for functionality. There is made analysis, development, design, theoretic estimation and practical verification of accurancy.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

45

Symerský, Tomáš. „Senzor pro měření průtoku“. Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2011. http://www.nusl.cz/ntk/nusl-219280.

Der volle Inhalt der Quelle

Annotation:

This diploma thesis is divided into two parts - theoretical and practical. In its first, theoretical part, deals with the theory of fluid and gas flow, heat transfer and diversification of sensors for flow measurement working on the electrical principle. It also deals with thermodynamic principle, which can be used for measuring very small flow and low-temperature ceramics that is used to implement microcanals for sensing very low flows. The practical part of the thesis deals with the very simulation of the entire structure in the program “COMSOL Multiphysics” - both in 2D and 3D views. Then there is shown the implementation and measurement of the flow sensor in a low-temperature ceramics, working on a thermodynamic principle.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

46

Krátký, Martin. „Analýza technicko-ekonomických parametrů traktorových souprav v dopravě“. Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2014. http://www.nusl.cz/ntk/nusl-231065.

Der volle Inhalt der Quelle

Annotation:

This thesis deals with the use of the tractor in agricultural transport. The first part describes the current status in construction of tractor engines, transmissions and chassis that are used in tractors suitable for transport. The theoretical section includes an overview of the legislative requirements that must be followed for the tractor kits in transport on the road. The main objective of this thesis was to evaluate a measuring of fuel consumption and efficiency of the tractor JCB Fastrac 185-65 with two flatbed trailers. For this purpose was created the methodics off terrain measurement, which were carried out for different operation modes of the engine. The results were tabular and graphical processing including determining the accuracy of the method by calculating the relative error of measurement. For comparison a theoretical calculation of the consumed fuel was made. The aim of the measurements was to demonstrate fuel-saving during operation engine in the economic field and get an overview about fuel consumption and efficiency kits.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

47

Holemý, Ondřej. „Analýza dynamických parametrů železničního svršku“. Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2014. http://www.nusl.cz/ntk/nusl-226636.

Der volle Inhalt der Quelle

Annotation:

The masters thesis is about operational testing on selected constructions of a railway track „in situ“. There were selected two sections with and without under sleeper pads on a railway track for measurement. These measurements were evaluated then. The result is an assessment of the suitability or unsuitability for under sleeper pads for a rail transport.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

48

Julínek, Pavel. „Měření a modelování pokrytí bezdrátových sítí“. Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2015. http://www.nusl.cz/ntk/nusl-221257.

Der volle Inhalt der Quelle

Annotation:

The diploma thesis describes mobile communication systems GSM and UMTS including the operating principle of these systems. It also deals with the GPS issues and the determination of the location by this system. The signal path losses issues between the transmitter and receiver are also described. The focus is also put on Telit UC864-G model and the measurement system, operated by the created programme with the graphic user interface, which measures parameters of the cellular network according to entered input parameters and saves the measured values into the file. The part of the diploma thesis describes another created programme with the graphic user interface displaying the measured network parameters in map data with the possibility to compare the distribution of the measured signal value in both outdoor and indoor environment and the theoretical value set by the propagation models.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

49

Košťál, Jan. „Vliv provozních parametrů kotle na přítomnost jemných částic ve spalinách“. Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2017. http://www.nusl.cz/ntk/nusl-318720.

Der volle Inhalt der Quelle

Annotation:

This diploma thesis is devoted to the issues of the formation of fine particles in dependents on the combustion parameters. The first part of thesis is review, which summarized the information about combustion process and about formation of the gaseous products and fine particles inside them which created during combustion process. The main content of thesis is realization of measurements of fine particles from combustion, in several types of the tested combustion devices. Next part is a description of used measurement devices, which used for measurement. Last chapters are focused on evaluation of results from the measurements, comparison of the measurements between themselves and the finding the existence of the dependence of the formation of fine particles on operational parameters of boiler. And all results are evaluated in the conclusion.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

50

Halfar, Tomáš. „Zlepšení energetických parametrů asynchronních strojů malého výkonu“. Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2013. http://www.nusl.cz/ntk/nusl-219929.

Der volle Inhalt der Quelle

Annotation:

The master’s thesis Improvement power parameter of small induction motors deals with issues of lowering the losses of small induction motors. The first part introduces with design and principles of operation of induction motors. Also introduces to theoretical problematic of losses, their lowering and measuring. In the practical part there are results of the measuring the losses in the induction motor ATAS Elektromotory Náchod a.s. T22VT512 (71-0512). There are proposed methods of increasing the efficiency of induction motor due to measuring and their verification in the Maxwell software. The last part is dedicated to measuring the losses of prototype motor from ATAS and comparison of results with previous motor.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

Wir bieten Rabatte auf alle Premium-Pläne für Autoren, deren Werke in thematische Literatursammlungen aufgenommen wurden. Kontaktieren Sie uns, um einen einzigartigen Promo-Code zu erhalten!