Bücher zum Thema „Matrix of experiments“

In an accessible form, the textbook presents the theoretical foundations of physical and mathematical modeling; considers the modeling of mass, heat and momentum transfer processes, the relationship and analogy between them; studies the theory of similarity, its application in modeling, models of the structure of flows in apparatuses. Experimental-statistical and experimental-analytical modeling methods are also described, which include "black box" methods, planning passive, active full and fractional factor experiments, and adjusting models based on the results of the experiment. At the same time, modeling of chemical reactors, methods of optimization of chemical-technological processes, their selection, comparison and application examples are considered. Examples of modeling and optimization of processes in chemical, petrochemical and biotechnology on a computer in Excel and MathCAD environments are given. The appendices provide the basics of working in the MathCAD environment and elements of matrix algebra. Meets the requirements of the Federal state educational standards of higher education of the latest generation. It is intended for bachelors who are trained for the chemical, petrochemical, food, textile and light industries. It can be useful for specialists and undergraduates, as well as for scientists, engineers and postgraduates dealing with the problem under consideration.

When the full pedigree of individuals whose values (records) were used in the selection decisions during an experiment (or breeding program) is known, LS analysis can be replaced by mixed models and their Bayesian extensions. In this setting, REML can be used to estimate genetic variances and BLUP can be used to estimate the mean breeding value in any given generation. The latter allows for genetic trends to be separated from environmental trends without the need for a control population. Under the infinitesimal model setting (wherein selection-induced allele-frequency changes are small during the course of the experiment), the use of the relationship matrix in a BLUP analysis accounts for drift, nonrandom mating, and linkage disequilibrium.

This article discusses some applications of concepts from random matrix theory (RMT) to condensed matter physics, with emphasis on phenomena, predicted or explained by RMT, that have actually been observed in experiments on quantum wires and quantum dots. These observations range from universal conductance fluctuations (UCF) to weak localization, non-Gaussian thermopower distributions, and sub-Poissonian shot noise. The article first considers the UCF phenomenon, nonlogarithmic eigenvalue repulsion, and sub-Poissonian shot noise in quantum wires before analysing level and wave function statistics, scattering matrix ensembles, conductance distribution, and thermopower distribution in quantum dots. It also examines the effects (not yet observed) of superconductors on the statistics of the Hamiltonian and scattering matrix.

In this chapter we consider a complex set of optical phenomena linked to the spin dynamics of exciton-polaritons in semiconductor microcavities. We review a few important experiments that reveal the main mechanisms of the exciton-polariton spin dynamics and present the theoretical model of polariton spin relaxation based on the density matrix formalism. We also discuss the polarisation properties of the condensate and the superfluid phase transitions for polarised exciton-polaritons. We briefly address the polarization multistability and switching in polariton lasers. Finally, the optical spin-Hall and spin-Meissner effects are described.

Although recent years have seen the emergence of sustained research on experimental music theater, most of this is largely of a descriptive nature. To address the shortcomings of such approaches, this chapter outlines a theory of experimental music theater based on a clear definition and a number of constitutive features. A number of theoretical terms from the fields of performance theory and theater practice are introduced, namely “showing doing” (Richard Schechner), “non-matrixed performance” and “non-matrixed representation” (Michael Kirby), and “metaxis” (Augusto Boal). The analytical effectiveness of this theoretical framework is demonstrated by discussion of case studies drawn both from the “classics” of experimental music theater (John Cage, Mauricio Kagel) and from recent work (Christopher Fox, David Bithell, Trond Reinholdtsen).

This book explains how to use the bulk synchronous parallel (BSP) model to design and implement parallel algorithms in the areas of scientific computing and big data. Furthermore, it presents a hybrid BSP approach towards new hardware developments such as hierarchical architectures with both shared and distributed memory. The book provides a full treatment of core problems in scientific computing and big data, starting from a high-level problem description, via a sequential solution algorithm to a parallel solution algorithm and an actual parallel program written in the communication library BSPlib. Numerical experiments are presented for parallel programs on modern parallel computers ranging from desktop computers to massively parallel supercomputers. The introductory chapter of the book gives a complete overview of BSPlib, so that the reader already at an early stage is able to write his/her own parallel programs. Furthermore, it treats BSP benchmarking and parallel sorting by regular sampling. The next three chapters treat basic numerical linear algebra problems such as linear system solving by LU decomposition, sparse matrix-vector multiplication (SpMV), and the fast Fourier transform (FFT). The final chapter explores parallel algorithms for big data problems such as graph matching. The book is accompanied by a software package BSPedupack, freely available online from the author’s homepage, which contains all programs of the book and a set of test programs.

The discovery of pain biomarkers has profound implications for both pharmacology and neurobiology; in 2013, in the landmark paper discussed in this chapter, Wager et al. presented a neurologic signature of pain based on human brain imaging performed in healthy individuals administered experimental heat-pain stimuli. Using advanced analytic methods based on machine learning and multivariate pattern analysis, Wagner et al. provide very convincing support for the idea that pain is encoded in a distinctive pattern of brain activity in one or several brain areas typically referred to as the ‘pain matrix’, which acts as a saliency detection system for the body. Although the usage of such tool to infer pain in patients poses major challenges and is clearly not indicated in medico-legal contexts, the study provides experimental proof of concept in favour of a pattern theory of pain as well as for a specificity theory of pain.

Physical Ultrasonics of Composites is a rigorous introduction to the characterization of composite materials by means of ultrasonic waves. Composites are treated here not simply as uniform media, but as inhomogeneous layered anisotropic media with internal structure characteristic of composite laminates. The objective here is to concentrate on exposing the singular behavior of ultrasonic waves as they interact with layered, anisotropic materials, materials which incorporate those structural elements typical of composite laminates. This book provides a synergistic description of both modeling and experimental methods in addressing wave propagation phenomena and composite property measurements. After a brief review of basic composite mechanics, a thorough treatment of ultrasonics in anisotropic media is presented, along with composite characterization methods. The interaction of ultrasonic waves at interfaces of anisotropic materials is discussed, as are guided waves in composite plates and rods. Waves in layered media are developed from the standpoint of the "Stiffness Matrix", a major advance over the conventional, potentially unstable Transfer Matrix approach. Laminated plates are treated both with the stiffness matrix and using Floquet analysis. The important influence on the received electronic signals in ultrasonic materials characterization from transducer geometry and placement are carefully exposed in a dedicated chapter. Ultrasonic wave interactions are especially susceptible to such influences because ultrasonic transducers are seldom more than a dozen or so wavelengths in diameter. The book ends with a chapter devoted to the emerging field of air-coupled ultrasonics. This new technology has come of age with the development of purpose-built transducers and electronics and is finding ever wider applications, particularly in the characterization of composite laminates.

This article describes the basic principles of semiconductor quantum-dot infrared photodetectors based on conduction-band intersublevel transitions. Sufficient background material is discussed to enable an appreciation of the subtle differences between quantum-well and quantum-dot devices. The article first considers infrared photon absorption and photon detection, along with some metrics for photon detectors and the detection of infrared radiation by semiconductors. It then examines the optical matrix element for interband, intersubband and intersublevel transitions before turning to experimental single-pixel quantum-dot infrared photodetectors. In particular, it explains the epitaxial synthesis of quantum dots and looks at mid-wave and long-wave quantum-dot infrared photodetectors. It also evaluates the characteristics of quantum-dot detectors and possible development of quantum-dot focal plane array imagers. The article concludes with an assessment of the challenges and prospects for high-performance detectors and arrays.

Cardiac connective tissues are primarily formed by cardiac fibroblasts (CF) of diverse embryonic origins. Whereas CF specific roles in cardiac morphogenesis remain under-researched, their involvement in adult cardiac fibrosis is clinically relevant. Cardiac fibrosis is a common element of several chronic cardiac conditions characterized by the loss of ventricular wall mechanical function, ultimately driving to heart failure. In the ischaemic heart early reparative fibrosis evidences the very restricted regenerative potential of the myocardium. In non-ischaemic diseases fibrosis is activated by unknown signals. We summarize current knowledge on the origin of CFs and their developmental roles, and discuss the differential disease-dependent response of different CF subpopulations to various pathological stimuli. We also describe the characteristic cell-cell and cell-matrix interactions that determine the fibrotic remodelling of the myocardium. We analyse experimental models for the study of cardiac fibrosis, and suggest future directions in the search for new markers and therapeutic targets.

In this incisive study, Sarah Ehlers returns to the Depression-era United States in order to unsettle longstanding ideas about poetry and emerging approaches to poetics. By bringing to light a range of archival materials and theories about poetry that emerged on the 1930s left, Ehlers reimagines the historical formation of modern poetics. Offering new and challenging readings of prominent figures such as Langston Hughes, Muriel Rukeyser, and Jacques Roumain, and uncovering the contributions of lesser-known writers such as Genevieve Taggard and Martha Millet, Ehlers illuminates an aesthetically and geographically diverse matrix of schools and movements. Resisting the dismissal of thirties left writing as mere propaganda, the book reveals how communist-affiliated poets experimented with poetic modes—such as lyric and documentary—and genres, including songs, ballads, and nursery rhymes, in ways that challenged existing frameworks for understanding the relationships among poetic form, political commitment, and historical transformation. As Ehlers shows, Depression left movements and their international connections are crucial for understanding both the history of modern poetry and the role of poetic thought in conceptualizing historical change.

Understanding pathogenic mechanism in disease is critical for development of targeted therapeutic strategies. Although there are, at this time, only a handful of experimental approaches for treating osteoarthritis (OA), until 10 years ago this disease was almost universally considered an unmodifiable condition. Emerging data during this time, largely fuelled by studies in rodent models, has completely changed the paradigm of disease pathogenesis and has for the first time, generated novel, realistic targets for this highly prevalent and disabling condition. These targets include the aggrecanases, members of the ADAMTS family, and collagenases, which together are critical for the early breakdown of the extracellular matrix of cartilage. Some recent success has also been demonstrated by targeting bone in disease. Development of pain in OA is complex and likely arises from different tissues at different stages of disease. In the following section we describe the pathological features of OA, and discuss the evolution of theories of OA pathogenesis and factors that have limited mechanistic clarity in this disease. We summarize the molecular pathways that are now known to be active in disease, and consider how these identified molecular pathways could be linked to known epidemiological risk factors. We finish by discussing possible future therapeutic strategies that will emerge from these discoveries and the current limitations in implementing new therapies in OA.

Arterial pathologies, important causes of death and morbidity in humans, are closely related to modifications in the circulatory system during evolution. With increasing intraluminal pressure and arterial bifurcation density, the arterial wall becomes the target of interactions with blood components and outward convection of plasma solutes and particles, including plasma zymogens and leukocyte proteases. Abdominal aortic aneurysms of atherothrombotic origin are characterized by the presence of an intraluminal thrombus (ILT), a major source of proteases, including plasmin, MMP-9, and elastase. Saccular cerebral aneurysms are characterized by the interaction of haemodynamics and arterial bifurcation defects, of either genetic or congenital origin. They also develop an intrasaccular thrombus, implicated in rupture. Aneurysms of the ascending aorta (TAAs) are not linked to atherothrombotic disease, and do not develop an ILT. The most common denominator of TAAs, whatever their aetiology, is the presence of areas of mucoid degeneration, and increased convection and vSMC-dependent activation of plasma zymogens within the wall, causing extracellular matrix proteolysis. TAA development is also associated with an epigenetic phenomenon of SMAD2 overexpression and nuclear translocation, potentially linked to chronic changes in mechanotransduction. Aortic dissections share common aetiologies and pathology (areas of mucoid degeneration) with TAAs, but differ by the absence of any compensatory epigenetic response. There are main experimental animal models of aneurysms, all characterized by the cessation of aneurysmal progression after interruption of the exogenous stimuli used to induce it. These new pathophysiological approaches to aneurysms in humans pave the way for new diagnostic and therapeutic tools.

Bones are multifunctional passive organs of movement that supports soft tissue and directly attached muscles. They also protect internal organs and are a reserve of calcium, phosphorus and magnesium. Each bone is covered with periosteum, and the adjacent bone surfaces are covered by articular cartilage. Histologically, the bone is an organ composed of many different tissues. The main component is bone tissue (cortical and spongy) composed of a set of bone cells and intercellular substance (mineral and organic), it also contains fat, hematopoietic (bone marrow) and cartilaginous tissue. Bones are a tissue that even in adult life retains the ability to change shape and structure depending on changes in their mechanical and hormonal environment, as well as self-renewal and repair capabilities. This process is called bone turnover. The basic processes of bone turnover are: • bone modeling (incessantly changes in bone shape during individual growth) following resorption and tissue formation at various locations (e.g. bone marrow formation) to increase mass and skeletal morphology. This process occurs in the bones of growing individuals and stops after reaching puberty • bone remodeling (processes involve in maintaining bone tissue by resorbing and replacing old bone tissue with new tissue in the same place, e.g. repairing micro fractures). It is a process involving the removal and internal remodeling of existing bone and is responsible for maintaining tissue mass and architecture of mature bones. Bone turnover is regulated by two types of transformation: • osteoclastogenesis, i.e. formation of cells responsible for bone resorption • osteoblastogenesis, i.e. formation of cells responsible for bone formation (bone matrix synthesis and mineralization) Bone maturity can be defined as the completion of basic structural development and mineralization leading to maximum mass and optimal mechanical strength. The highest rate of increase in pig bone mass is observed in the first twelve weeks after birth. This period of growth is considered crucial for optimizing the growth of the skeleton of pigs, because the degree of bone mineralization in later life stages (adulthood) depends largely on the amount of bone minerals accumulated in the early stages of their growth. The development of the technique allows to determine the condition of the skeletal system (or individual bones) in living animals by methods used in human medicine, or after their slaughter. For in vivo determination of bone properties, Abstract 10 double energy X-ray absorptiometry or computed tomography scanning techniques are used. Both methods allow the quantification of mineral content and bone mineral density. The most important property from a practical point of view is the bone’s bending strength, which is directly determined by the maximum bending force. The most important factors affecting bone strength are: • age (growth period), • gender and the associated hormonal balance, • genotype and modification of genes responsible for bone growth • chemical composition of the body (protein and fat content, and the proportion between these components), • physical activity and related bone load, • nutritional factors: – protein intake influencing synthesis of organic matrix of bone, – content of minerals in the feed (CA, P, Zn, Ca/P, Mg, Mn, Na, Cl, K, Cu ratio) influencing synthesis of the inorganic matrix of bone, – mineral/protein ratio in the diet (Ca/protein, P/protein, Zn/protein) – feed energy concentration, – energy source (content of saturated fatty acids - SFA, content of polyun saturated fatty acids - PUFA, in particular ALA, EPA, DPA, DHA), – feed additives, in particular: enzymes (e.g. phytase releasing of minerals bounded in phytin complexes), probiotics and prebiotics (e.g. inulin improving the function of the digestive tract by increasing absorption of nutrients), – vitamin content that regulate metabolism and biochemical changes occurring in bone tissue (e.g. vitamin D3, B6, C and K). This study was based on the results of research experiments from available literature, and studies on growing pigs carried out at the Kielanowski Institute of Animal Physiology and Nutrition, Polish Academy of Sciences. The tests were performed in total on 300 pigs of Duroc, Pietrain, Puławska breeds, line 990 and hybrids (Great White × Duroc, Great White × Landrace), PIC pigs, slaughtered at different body weight during the growth period from 15 to 130 kg. Bones for biomechanical tests were collected after slaughter from each pig. Their length, mass and volume were determined. Based on these measurements, the specific weight (density, g/cm3) was calculated. Then each bone was cut in the middle of the shaft and the outer and inner diameters were measured both horizontally and vertically. Based on these measurements, the following indicators were calculated: • cortical thickness, • cortical surface, • cortical index. Abstract 11 Bone strength was tested by a three-point bending test. The obtained data enabled the determination of: • bending force (the magnitude of the maximum force at which disintegration and disruption of bone structure occurs), • strength (the amount of maximum force needed to break/crack of bone), • stiffness (quotient of the force acting on the bone and the amount of displacement occurring under the influence of this force). Investigation of changes in physical and biomechanical features of bones during growth was performed on pigs of the synthetic 990 line growing from 15 to 130 kg body weight. The animals were slaughtered successively at a body weight of 15, 30, 40, 50, 70, 90, 110 and 130 kg. After slaughter, the following bones were separated from the right half-carcass: humerus, 3rd and 4th metatarsal bone, femur, tibia and fibula as well as 3rd and 4th metatarsal bone. The features of bones were determined using methods described in the methodology. Describing bone growth with the Gompertz equation, it was found that the earliest slowdown of bone growth curve was observed for metacarpal and metatarsal bones. This means that these bones matured the most quickly. The established data also indicate that the rib is the slowest maturing bone. The femur, humerus, tibia and fibula were between the values of these features for the metatarsal, metacarpal and rib bones. The rate of increase in bone mass and length differed significantly between the examined bones, but in all cases it was lower (coefficient b <1) than the growth rate of the whole body of the animal. The fastest growth rate was estimated for the rib mass (coefficient b = 0.93). Among the long bones, the humerus (coefficient b = 0.81) was characterized by the fastest rate of weight gain, however femur the smallest (coefficient b = 0.71). The lowest rate of bone mass increase was observed in the foot bones, with the metacarpal bones having a slightly higher value of coefficient b than the metatarsal bones (0.67 vs 0.62). The third bone had a lower growth rate than the fourth bone, regardless of whether they were metatarsal or metacarpal. The value of the bending force increased as the animals grew. Regardless of the growth point tested, the highest values were observed for the humerus, tibia and femur, smaller for the metatarsal and metacarpal bone, and the lowest for the fibula and rib. The rate of change in the value of this indicator increased at a similar rate as the body weight changes of the animals in the case of the fibula and the fourth metacarpal bone (b value = 0.98), and more slowly in the case of the metatarsal bone, the third metacarpal bone, and the tibia bone (values of the b ratio 0.81–0.85), and the slowest femur, humerus and rib (value of b = 0.60–0.66). Bone stiffness increased as animals grew. Regardless of the growth point tested, the highest values were observed for the humerus, tibia and femur, smaller for the metatarsal and metacarpal bone, and the lowest for the fibula and rib. Abstract 12 The rate of change in the value of this indicator changed at a faster rate than the increase in weight of pigs in the case of metacarpal and metatarsal bones (coefficient b = 1.01–1.22), slightly slower in the case of fibula (coefficient b = 0.92), definitely slower in the case of the tibia (b = 0.73), ribs (b = 0.66), femur (b = 0.59) and humerus (b = 0.50). Bone strength increased as animals grew. Regardless of the growth point tested, bone strength was as follows femur > tibia > humerus > 4 metacarpal> 3 metacarpal> 3 metatarsal > 4 metatarsal > rib> fibula. The rate of increase in strength of all examined bones was greater than the rate of weight gain of pigs (value of the coefficient b = 2.04–3.26). As the animals grew, the bone density increased. However, the growth rate of this indicator for the majority of bones was slower than the rate of weight gain (the value of the coefficient b ranged from 0.37 – humerus to 0.84 – fibula). The exception was the rib, whose density increased at a similar pace increasing the body weight of animals (value of the coefficient b = 0.97). The study on the influence of the breed and the feeding intensity on bone characteristics (physical and biomechanical) was performed on pigs of the breeds Duroc, Pietrain, and synthetic 990 during a growth period of 15 to 70 kg body weight. Animals were fed ad libitum or dosed system. After slaughter at a body weight of 70 kg, three bones were taken from the right half-carcass: femur, three metatarsal, and three metacarpal and subjected to the determinations described in the methodology. The weight of bones of animals fed aa libitum was significantly lower than in pigs fed restrictively All bones of Duroc breed were significantly heavier and longer than Pietrain and 990 pig bones. The average values of bending force for the examined bones took the following order: III metatarsal bone (63.5 kg) <III metacarpal bone (77.9 kg) <femur (271.5 kg). The feeding system and breed of pigs had no significant effect on the value of this indicator. The average values of the bones strength took the following order: III metatarsal bone (92.6 kg) <III metacarpal (107.2 kg) <femur (353.1 kg). Feeding intensity and breed of animals had no significant effect on the value of this feature of the bones tested. The average bone density took the following order: femur (1.23 g/cm3) <III metatarsal bone (1.26 g/cm3) <III metacarpal bone (1.34 g / cm3). The density of bones of animals fed aa libitum was higher (P<0.01) than in animals fed with a dosing system. The density of examined bones within the breeds took the following order: Pietrain race> line 990> Duroc race. The differences between the “extreme” breeds were: 7.2% (III metatarsal bone), 8.3% (III metacarpal bone), 8.4% (femur). Abstract 13 The average bone stiffness took the following order: III metatarsal bone (35.1 kg/mm) <III metacarpus (41.5 kg/mm) <femur (60.5 kg/mm). This indicator did not differ between the groups of pigs fed at different intensity, except for the metacarpal bone, which was more stiffer in pigs fed aa libitum (P<0.05). The femur of animals fed ad libitum showed a tendency (P<0.09) to be more stiffer and a force of 4.5 kg required for its displacement by 1 mm. Breed differences in stiffness were found for the femur (P <0.05) and III metacarpal bone (P <0.05). For femur, the highest value of this indicator was found in Pietrain pigs (64.5 kg/mm), lower in pigs of 990 line (61.6 kg/mm) and the lowest in Duroc pigs (55.3 kg/mm). In turn, the 3rd metacarpal bone of Duroc and Pietrain pigs had similar stiffness (39.0 and 40.0 kg/mm respectively) and was smaller than that of line 990 pigs (45.4 kg/mm). The thickness of the cortical bone layer took the following order: III metatarsal bone (2.25 mm) <III metacarpal bone (2.41 mm) <femur (5.12 mm). The feeding system did not affect this indicator. Breed differences (P <0.05) for this trait were found only for the femur bone: Duroc (5.42 mm)> line 990 (5.13 mm)> Pietrain (4.81 mm). The cross sectional area of the examined bones was arranged in the following order: III metatarsal bone (84 mm2) <III metacarpal bone (90 mm2) <femur (286 mm2). The feeding system had no effect on the value of this bone trait, with the exception of the femur, which in animals fed the dosing system was 4.7% higher (P<0.05) than in pigs fed ad libitum. Breed differences (P<0.01) in the coross sectional area were found only in femur and III metatarsal bone. The value of this indicator was the highest in Duroc pigs, lower in 990 animals and the lowest in Pietrain pigs. The cortical index of individual bones was in the following order: III metatarsal bone (31.86) <III metacarpal bone (33.86) <femur (44.75). However, its value did not significantly depend on the intensity of feeding or the breed of pigs.

La migración internacional es un fenómeno que se ha incrementado a nivel mundial, alcanzando sus niveles máximos históricamente. A esta realidad global están innegablemente asociadas las múltiples formas de discriminación que experimentan muchos inmigrantes en base a su nacionalidad y estatus legal. En Europa este panorama no es un asunto de data reciente y sus Estados no están excluidos del fenómeno de la globalización y la migración. Por ello, la Unión Europea (en lo sucesivo, UE) ha consagrado –a través de una serie de normativas regulatorias– la protección de derechos humanos. Esta salvaguarda se ha extendido expresamente a los inmigrantes a través de la implementación de una serie de directivas. Pese a tales previsiones –en atención al principio de subsidiariedad– los Estados miembros de la UE por separado han promulgado legislaciones y adoptado decisiones judiciales con contenido muy variado respecto de sus asuntos migratorios. Esto ha generado debates y polémicas en diferentes ámbitos. A lo anterior se suma la propagación del racismo y xenofobia en Europa –así como el pronunciamiento de órdenes de expulsión– que, lejos de posibilitar la inclusión dentro de la sociedad europea de estos grupos migratorios, exacerba tales conflictos creando segundas categorías de ciudadanos. Por tanto, a nivel de la UE no es tarea sencilla determinar el alcance y contenido de las directivas relativas a los procedimientos de detención y expulsión de inmigrantes. Especialmente cuando se pretende aglutinar los diferentes criterios en la materia contenidos en las diversas legislaciones migratorias de los Estados miembros. Con este propósito, la Directiva 2008/115/CE9 (en lo sucesivo, directiva retorno), se erige como una normativa de mínimos a ser implementada por los Estados miembros. Sin embargo, en su implementación se enfrenta a criterios interpretativos de índole diversa. Estos han pretendido zanjarse mediante el planteamiento de la cuestión prejudicial, con resultados de naturaleza dispar por parte del Tribunal de Justicia de la Unión Europea (en lo sucesivo, TJUE). Por ello, la primera parte de esta investigación tiene por propósito identificar el aporte específico de la UE en la protección de los inmigrantes ante la detención y expulsión. Ello a través del estudio de los principios emanados del derecho europeo primario relativos a la progresiva protección de los derechos humanos de los inmigrantes, junto a la Carta de los Derechos Fundamentales de la UE (en lo sucesivo, la CDFUE) y sus directivas, a fin de responder: ¿bajo qué parámetros se promueve la protección de los derechos humanos de los inmigrantes en estos procedimientos administrativos?, y ¿cómo ha interpretado el TJUE la aplicación de estos principios europeos en relación a la protección de los derechos humanos de los inmigrantes frente a la detención administrativa y la expulsión?

"Prefață: Consiliere și mentorare cu impact Călăuzirea spirituală: de la „avva” Antichității la mentorul de azi Sfântul apostol Pavel le scria romanilor: „Dar cum vor chema pe Acela în care n-au crezut? Și cum vor crede în Acela despre care n-au auzit? Și cum vor auzi despre El, fără ca cineva să predice? Și cum vor predica, dacă n-au fost trimiși? Astfel, credința vine din cele auzite, iar cele auzite, prin Cuvântul Lui Dumnezeu.” (Romani 10: 14-15). Nimeni n-a plecat la propovăduire de capul lui. 1. Inițial, Isus „a chemat pe cine a vrut” (chemarea; vocația divină: gr. kaleo; lat. voco/are = a chema); 2. apoi, „ei au venit la El și a rânduit dintre ei 12, ca să-i aibă cu Sine” (răspunsul personal: voluntar și prompt [lat. protinus = îndată]; asumarea vocației apostolice și „ucenicia” alături de Isus timp de trei ani; gr. mathitevo = a fi discipol; a învăța; lat. discipulus); și 3. în final, Isus „i-a trimis să predice” (misiunea apostolică; gr. apo/stello; lat. mitto/ere = a trimite; missio/onis = trimitere; gr. kirysso = a propovădui; „a face o proclamație în calitate de herald”; un „mesager al Domnului”; gr. kyr = domn) [Marcu 3:13-14]. Chemare, ucenicie, trimitere..., toate acestea s-au petrecut „la împlinirea timpului” (Galateni 4:4), într-un moment de cumpănă al omenirii, cum ar zice E. Cioran: „Pe culmile disperării”, când „Poporul care stătea în întuneric, a văzut o mare Lumină și, celor care zăceau în ținutul și în umbra morții, le-a răsărit Lumina” (Matei 4:16) „transfigurării cosmice” (Cioran) mesianice. Isus n-a venit într-o lume pregătită să-L primească, ci într-o lume bulversată, disperată și în așteptare... Nu era o lume mai dreaptă, mai bună, mai credincioasă, mai morală, mai cultă, mai catehizată, mai primitoare decât cea de azi. Dar Isus n-a ținut cont de nimic din toate astea, ci pur și simplu a venit să-și îndeplinească „misiunea”: a învățat, a vindecat boli incurabile, a înviat persoane trecute în „viața de apoi”, a iertat, a exorcizat „demonii” multor patimi, a dat sens multor vieți, a provocat, a contestat formalismele Templului, cărturarilor și fariseilor, a declanșat furia mai marilor vremii și nu a fugit de supliciul și „rușinea” crucii. Într-un fel, la (răs)crucea vremurilor de azi, lucrurile par a se suprapune cu cele din timpul lui Isus. Trăim într-o lume complet debusolată, secularizată, nihilistă, agnostică, sceptică, indiferentă, relativistă, dezumanizată, lacomă și nesătulă, buimacă, parcă „fără istorie spirituală și fără viitor”, ostilă Celui de Sus și refractară oricărei morale, o epocă a indiscreției și lipsei de pudoare, a pornografiei, traficului de carne vie, vânzărilor de armament, droguri etc., fără sentimentul păcatului (Morale sans péché, dr. Hesnard, 1954), fără pic de rușine, fără valori, direcție, sens și destinație spirituală. Dumnezeu ne-a adus de la haos (abis, „tohu wa bohu” = o lume „fără formă și goală”; „fără cap și fără coadă”) la kosmos (ordine, viață, „căpătâi”), dar noi, parcă tributari „vocației entropiei”, mergem ireversibil către neant, nonsens și autodistrugere. Dumnezeu ne-a dăruit Viața, dar noi, incapabili să-i descifrăm farmecul, bucuria, valoarea și sensul, ne-o suprimăm sau ne-o irosim în nimicnicie. Ne-a dăruit Iubirea, dar ura, intoleranța și resentimentele ne stăpânesc. „Lumina a venit în lume, dar oamenii au iubit mai mult întunericul decât lumina, pentru că faptele lor erau rele.” (Ioan 3:19). Nu suntem cu nimic mai buni peste 2000 de ani decât atunci, dimpotrivă! Dar, în loc să stăm și să ne lamentăm continuu, mai bine căutăm soluții. Omul sfințește locul! Tuturor acestor provocări vor trebui să le facă față duhovnicii, mentorii, cateheţii și toți învățătorii spirituali de azi. O teologie de manual, scolastică, teoretică, stearpă și polemicile noastre confesionaliste sunt de mult depășite. Cum „imputa” ironic un student profesorului de dogmatică: „Dom’ profesor, cred că nici Dumnezeu nu știe despre El atâtea câte ați scris dumneavoastră în manualul acesta!” Termeni, dogme, erezii, speculații filosofice, dispute – la ce servesc toate astea? „Nimic nu e mai sărac decât cugetarea care, stând afară de Dumnezeu, filosofează despre Dumnezeu.” (Diadoh, episcop al Foticeei, sec. V). Azi, e nevoie de creștini autentici și mărturisitori adevărați (gr. martirevo = a mărturisi; de aici și termenul de „martir”) într-o relație vie cu Dumnezeu, „din interiorul Lui”, în Duhul Lui, nu doar de niște transmițători de cunoștințe teologice exterioare, mereu puși pe harță pentru monopolul (exclusivismul) și „drepturile de autor” asupra „adevărului” divin. Vremea polemicilor sterile a apus. Lumea nu mai are nevoie să afle „sexul îngerilor”! E nevoie de o Întâlnire adevărată cu Dumnezeu, nu doar la nivelul minții și speculațiilor teologice, ci și la nivelul inimii și al spiritului. Un consilier sau mentor spiritual asta va trebui să facă, să-l conducă pe omul zilelor de azi la Marea Întâlnire existențială și spirituală cu Dumnezeu. „Oare poate un orb să călăuzească pe un alt orb? Nu vor cădea amândoi în groapă?” (Luca 6:39). Avem nevoie de duhovnici adevărați, de consilieri adevărați, de mentori spirituali adevărați, cu pregătire umană, teologică și viață spirituală pe măsură, care să înțeleagă omul de azi cu toate problemele, slăbiciunile și ezitările lui, nu de triumfaliști „îmbelferiţi ai spiritului”, de legaliști, formaliști, moraliști de mucava care să te trateze de pe poziții de superioritate, suficiență și omnisciență. Avem nevoie de călăuze spirituale umane, calde, autentice, vii care să „nu ne dea lecții de morală ieftină” și de „auto-izbutită soteriologie”. Nu e nevoie de „experți” care să ni se insinueze drept „modele” și „păstori” ai unei turme paraplegice și oarbe, ci de oameni adevărați cu inimă caldă și mare, cu care să putem intra într-un dialog real, de la om la om, de la suflet la suflet, cu Dumnezeul cel Viu prezent în mijlocul nostru. Predica publică e una, relația de îndrumare spirituală, de consiliere sau de mentorat este alta. Este o relație particulară, de la om la om, cu o forță de impact soteriologic imensă: o adevărată „chirurgie spirituală” în care omul își oferă mentorului spiritual inima deschisă ca „pe tavă” cu toată încrederea. De măiestria și responsabilitatea duhovnicului, consilierului sau mentorului spiritual depinde „reușita operației” și felul în care este „suturată” incizia. Din păcate, mulți au rămas profund dezamăgiți și debusolați după „întâlnirea” cu unele „pseudo-călăuze” sau „mercenari” implicați în acest câmp psihologic și spiritual extrem de fragil. Predica te poate atinge parțial, dar cuvântul adresat direct, de la inimă la inimă, n-are cum să nu-ţi trezească sentimente, întrebări, idei, aspirații puternice. Aceasta și era relația directă dintre avva (maestrul spiritual) și ucenic, încă din antichitatea creștină, și către asta tindem și acum, spre o neo-evanghelizare sau re-încreştinare autentică (nu îndoctrinare sau prozelitism) a omului, prin comunicarea față în față cu mentorul, un om mai experimentat, pregătit (psihologic și spiritual), cu învățăcelul, în curs de formare, pentru a-l smulge din marasmul și pericolele societății atee despre care vorbeam mai sus. Mai trebuie doar să înțelegem că, azi, această relație spirituală de călăuzire este cumva „pe picior de egalitate”. Nimeni nu se consideră superior nimănui, doar „maestrul” spiritual este dispus și disponibil să (se) investească în „discipol”, în beneficiul orientării lui existențiale și mântuirii. Aceasta înseamnă „artă” și autenticitate spirituală! Volumul de față, Consiliere și mentorare cu impact, ca, de altfel, întreaga colecție Autentic, urmăreşte obținerea unor mărturii adevărate ale unor persoane autentice, care să le fie de folos în orientarea și formarea oamenilor dispuși să-și caute calea și rostul lor spiritual. Așa cum, deja, ne-a obișnuit apariția primului volum, Copilărie și parentalitate cu impact, structura celui de față este la fel de coerentă, variată și interesantă cum, nu mă îndoiesc nicio clipă, vor fi și cele ce vor urma. Coordonatoarea volumului și a colecției, doamna conf. univ. dr. Patricia Runcan, un manager cultural excelent și, la rându-i, un om spiritual autentic, nu se dezice, nici de această dată, de stilul ei „nemțesc”, precis, pedant și de chemarea/menirea pe care i-a dat-o Dumnezeu: de a învăța în școală, de a mărturisi în/prin Biserică și de a scrie mesajul divin celor dispuși să-l asculte. Susțin și încurajez, cu tot sufletul, această minunată inițiativă a colecției Autentic și sper să dea roade cât mai bogate și îndelungate! Conf. univ. dr. Eugen Jurca "