Thematische Bibliographien / Manufacture

Inhaltsverzeichnis

Zeitschriftenartikel
Dissertationen
Bücher
Buchteile
Konferenzberichte
Berichte der Organisationen

Auswahl der wissenschaftlichen Literatur zum Thema „Manufacture“

Autor: Grafiati

Veröffentlicht am 4. Juni 2021

Zuletzt aktualisiert am 31. Juli 2024

Geben Sie eine Quelle nach APA, MLA, Chicago, Harvard und anderen Zitierweisen an

Wählen Sie eine Art der Quelle aus:

Machen Sie sich mit den Listen der aktuellen Artikel, Bücher, Dissertationen, Berichten und anderer wissenschaftlichen Quellen zum Thema "Manufacture" bekannt.

Neben jedem Werk im Literaturverzeichnis ist die Option "Zur Bibliographie hinzufügen" verfügbar. Nutzen Sie sie, wird Ihre bibliographische Angabe des gewählten Werkes nach der nötigen Zitierweise (APA, MLA, Harvard, Chicago, Vancouver usw.) automatisch gestaltet.

Sie können auch den vollen Text der wissenschaftlichen Publikation im PDF-Format herunterladen und eine Online-Annotation der Arbeit lesen, wenn die relevanten Parameter in den Metadaten verfügbar sind.

Zeitschriftenartikel zum Thema "Manufacture"

Normand, Amanda, und T. H. Bradley. „An experimental investigation of Lean Six Sigma philosophies in a high-mix low-volume manufacturing environment“. PLOS ONE 19, Nr. 5 (17.05.2024): e0299498. http://dx.doi.org/10.1371/journal.pone.0299498.

Der volle Inhalt der Quelle

Annotation:

This article experimentally examines methods for implementing the philosophies of Lean Six Sigma (LSS) in a High-Mix Low-Volume (HMLV) manufacturing environment. HMLV environments present unique challenges to LSS paradigms because of the need for extraordinary operational flexibility and customer responsiveness. The subject HMLV manufacturer for this experimentation manufactures (among 8500 others) an example component for which 3 machines work independently to perform the necessary operations to manufacture this component. The experiment that is the subject of this research seeks to adapt LSS philosophies to develop treatments to improve the performance of the manufacturing of this component. These LSS-inspired treatments included 1) using cellular manufacturing methods, and the 3 machines as a single work cell to manufacture the component, and 2) using a single multipurpose machine to perform all operations required to manufacture the component. The results of this experiment demonstrate that the cellular manufacturing method was the most effective to reduce costs, to standardize operations at a process level, and to increase throughput. The single machine processing method improved production rates and on-time delivery relative to the baseline, but greatly increased lead time, thereby increasing total cost per part. These results highlight the importance of critically assessing the application of LSS within HMLV environments compared to the Low-Mix High-Volume (LMHV) environments where LSS is traditionally successful. HMLV manufacturers and researchers can use these findings to identify the most effective methods for their specific needs and to design interventions that will improve system-level manufacturing performance in high mix environments.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

Childerhouse, Thomas, und Martin Jackson. „Near Net Shape Manufacture of Titanium Alloy Components from Powder and Wire: A Review of State-of-the-Art Process Routes“. Metals 9, Nr. 6 (15.06.2019): 689. http://dx.doi.org/10.3390/met9060689.

Der volle Inhalt der Quelle

Annotation:

Near net shape (NNS) manufacturing offers an alternative to conventional processes for the manufacture of titanium alloy components. Compared to the conventional routes, which typically require extensive material removal of forged billets, NNS methods offer more efficient material usage and can significantly reduce machining requirements. Furthermore, NNS manufacturing processes offer benefits such as greater flexibility and reduced costs compared to conventional methods. Processes such as metal additive manufacturing (AM) have started to be adopted in niche applications, most notably for the manufacture of medical implants, where many conventionally forged components have been replaced by those manufactured by AM processes. However, for more widespread adoption of these emerging processes, an improvement in the confidence in the techniques by manufacturers is necessary. This requires addressing challenges such as the limited mechanical properties of parts in their as-built condition compared to wrought products and the post-process machining requirements of components manufactured by these routes. In this review, processes which use a powder or wire feedstock are evaluated to assess their capabilities for the manufacture of titanium alloy components. These processes include powder bed fusion and direct energy deposition metal additive processes as well as hybrid routes, which combine powder metallurgy with thermomechanical post-processing.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

Steedman, Hilary, und Karin Wagner. „Productivity, Machinery and Skills: Clothing Manufacture in Britain and Germany“. National Institute Economic Review 128 (Mai 1989): 40–57. http://dx.doi.org/10.1177/002795018912800104.

Der volle Inhalt der Quelle

Annotation:

This study compares samples of matched plants in Britain and Germany engaged in the manufacture of women's outerwear; it follows earlier matched plant studies, also published in the National Institute Economic Review, which examined matched plants in metalworking and furniture manufacture in these two countries. German clothing manufacturers specialise in high-fashion items produced in great variety of which a high proportion is exported at high unit prices; the typical British manufacturer concentrates on more standardised items produced in long runs and is consequently more vulnerable to competition from lower-cost producers in developing countries. The study examines the contribution of machinery, new technology and skills to differ ences in clothing productivity in the two countries. A final section discusses future trends in the industry in the light of the 1992 proposals for a Single European Market.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

Liu, Shi und Xu. „Alliance Decision of Supply Chain Considering Product Greenness and Recycling Competition“. Sustainability 11, Nr. 24 (04.12.2019): 6900. http://dx.doi.org/10.3390/su11246900.

Der volle Inhalt der Quelle

Annotation:

In a closed-loop supply chain (CLSC), the right alliance can help manufacturers better manufacture green products and make more profits. Choosing the most suitable alliance partner is also critical for manufacturers. In regard to product greenness and recycling competition, this paper considers the CLSC comprised of a dominant manufacturer, a retailer, and a third-party recycler. Based on the Stackelberg game and equilibrium analysis, we discuss the optimal supply chain decision-making under four different models. Then, in order to ensure supply chain (SC) members’ enthusiasm to participate in the alliance, we design a profit distribution method to distribute the total profit to SC members. The results show that manufacturer’s optimal alliance decision is related to the degree of recycling competition. When less than the threshold, C alliance(the manufacturer make an alliance with the retailer and the third-party recycler at the same time) is optimal, otherwise, MR alliance(the manufacturer and the retailer make an alliance ) is more beneficial for the manufacturer.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

Fonov, V. V., S. N. Grechanik und D. M. Golub. „Technology and equipment of vertical‑stack molding for the production of castings without pattern drafts“. Litiyo i Metallurgiya (FOUNDRY PRODUCTION AND METALLURGY), Nr. 4 (20.12.2021): 33–37. http://dx.doi.org/10.21122/1683-6065-2021-4-33-37.

Der volle Inhalt der Quelle

Annotation:

The article reports on the new technology and equipment of vertical‑stack molding (VSM), created by OJSC “BELNIILIT” for the manufacture of vertical‑stack molds. The development is intended for the production of molds and cast blanks of oil, which are later used for the manufacture of piston rings of internal combustion engines.The difference between the above‑mentioned technology and traditional methods of VSM is the use of models without drafts. The development is export‑oriented and has a great economic effect for ring manufacturers due to the absence of drafts on castings, since part of the mechanical operations for their processing is excluded, the metal consumption of blanks is reduced, the production spaces required in this regard are reduced, the necessary labor supply is reduced, etc.OJSC “BELNIILIT” has successfully carried out experimental design and technological work on the new scientific and technical products creation, which are of great interest to the world manufacturers of piston rings. An industrial sample of a molding machine and a mold manipulator were manufactured.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

Raplee, Jack. „DFMA to RP, ASAP“. Mechanical Engineering 121, Nr. 09 (01.09.1999): 72–74. http://dx.doi.org/10.1115/1.1999-sep-5.

Der volle Inhalt der Quelle

Annotation:

Manufacturing companies are turning increasingly to rapid prototyping (RP) to perform pre-assembly testing and improve the quality of the final product. Manufacturers also have begun to complement their RP practices using design for manufacture and assembly methodology. Design for assembly lowers the complexity of products through parts reduction and enables manufacturers to quantify assembly times and costs. Users are prompted to consider each part and decide if it must be separate from others in the assembly, leading to systematic simplification of design. The four approaches by which design for manufacturer (DFMA) software analyzes product configurations incorporate design for assembly, design for manufacture, design for service, and design for environment. Using design for assembly can reduce the number of parts in the product, but can increase the complexity of the parts that remain. Rapid prototyping combined with DFMA tools not only can determine if a product will perform its desired functions. According to an expert, when early manufacturing process planning is performed using DFMA and RP, it is synergistic.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

Baskaran, Kamaladevi. „The Power of Private Label in Retail Market“. International Journal of Business Administration and Management Research 4, Nr. 3 (30.09.2018): 6. http://dx.doi.org/10.24178/ijbamr.2018.4.3.06.

Der volle Inhalt der Quelle

Annotation:

Globally, own store brands or private labels are rapidly gaining share at the cost of manufacture brands. In India, where the share of organised retail is minuscule, manufacture brands still dominate. With the retail sector poised for growth, national brand manufacturers will have to contend with competition within distribution channel, which calls for revised marketing strategy locally, to thwart the threat of the private label in a store. The phenomenon also offers national brand manufacturers the opportunity to service the production needs of the private labels efficiently. The problem is India's internet-savvy consumers aren't as convinced about Private labels as their global counterparts. Consumers may be happy with the quality of private label when it comes to kitchen towels and staples like wheat flour but are wary when it comes to buying a store version of, say, baby food or shampoo. The paper has also discussed the different types branding strategies used by retailers in the developing countries. The manufacturer brands have an advantage relative to own brand where symbolic association and/or product innovation are important to customers. Conversely, where symbolic associations and product innovations are less important there is an opportunity for retailers to compete successfully with manufacturer brands if they can demonstrate comparable product quality and provide value or money. This paper deals with the power of private label in modern retail market.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

Nikolaeva, Elena, Alexander Chapyshev und Alexey Spitsyn. „Studying the Structure and Properties of the Material of Screws for Spinal Osteosynthesis“. Materials Science Forum 1052 (03.02.2022): 27–32. http://dx.doi.org/10.4028/p-743cc0.

Der volle Inhalt der Quelle

Annotation:

Metallic materials most suitable for the manufacture of polyaxial transpedicular screws have been analyzed. Choosing titanium alloy Ti-6Al-4V for their manufacture has been justified. When developing the screw design, the requirements for these medical products have been considered. The screws were manufactured on high-performance equipment. During the manufacture, the optimal tool material and cutting part geometry have been chosen. The surface was superfinished and anodic oxide coated. Modern measuring equipment was used to control the product quality and geometric parameters. The manufactured polyaxial transpedicular screw prototypes are not inferior in quality to their foreign analogs. The manufacturing technology proposed allows minimizing the labor intensity of production and 3-6 times reducing the cost of finished products.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

Li, Baixun, Guo Chen und Yaru Nan. „The role of sales effort on manufacturer's channel strategies“. MATEC Web of Conferences 189 (2018): 06003. http://dx.doi.org/10.1051/matecconf/201818906003.

Der volle Inhalt der Quelle

Annotation:

Competing manufacturers, who sell their products through retailers, may face the strategic distribution channel design question of whether to establish an “store-within-store” channel or not. With consider of the role of sales effort, we analyze the manufacturer channel strategies. Two cases are considered: competing manufacturer and competing retailer. We built four game models corresponding to four channel strategies, and discussed the influence of manufacture's bargaining power coefficient, prices competition intensity, and sales effort competition intensity on manufactures' channel strategies.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

Brown, Alan S. „Mexico Redux“. Mechanical Engineering 130, Nr. 01 (01.01.2008): 23–28. http://dx.doi.org/10.1115/1.2008-jan-1.

Der volle Inhalt der Quelle

Annotation:

This article discusses formerly America’s top low-cost manufacturer; the neighbor to the south is repositioning itself to be an advanced industrial player. Colantuoni manages market research for Mexico’s Offshore Group, which develops maquiladoras for firms that want to manufacture in Mexico. Maquiladoras import goods from the United States without paying taxes or tariffs, manufacture or assemble them into products, and export them back across the border. Today, Mexico is making more complex and sophisticated products, as well as goods that require fast turnarounds and customization. It has used its advantages to retain business even in industries—computers, telecommunications, and appliances—that seemed a natural fit for China. Management in general is also a consideration for manufacturers. Mexico’s physical proximity to the Unites States and Canada, and the shared business culture of North America make management easier. In many ways, competition from China has been good for Mexico. It has spurred it to move into engineering and manufacturing higher value-added products.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

Mehr Quellen

Dissertationen zum Thema "Manufacture"

Dumene, Richard Lawrence. „Manufacture and Characterization of Additively Manufactured Ceramic Electromagnetic Structures“. Thesis, Virginia Tech, 2018. http://hdl.handle.net/10919/83484.

Der volle Inhalt der Quelle

Annotation:

Additive Manufacturing (AM, also known as 3D printing) can produce novel three-dimensional structures using low-loss dielectric materials. This enables the construction of dielectrics with complex shapes that enable innovative microwave applications such as resonators, filters, and metamaterial lenses. This thesis addresses the production and characterization of cellular structures of various designed densities created with a low loss ceramic material, alumina (aluminum oxide), via vat photopolymerization. The permittivity of these printed structures is variable over roughly an octave, with a range of relative permittivites from 1.78 to 3.60, controlled via part geometry. Two additional materials, ferrite and nickel, have been explored for inclusion within these dielectric structures to enable the production of multi-material electromagnetic structures with conductive, magnetic, and dielectric elements.
Master of Science

APA, Harvard, Vancouver, ISO und andere Zitierweisen

Campos, Reales Castellanos Jose Eduardo. „Novel zeolite manufacture“. Thesis, University of Birmingham, 2005. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.422716.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

Normand, Marie-Astrid. „La manufacture d'orgues Krischer“. Thesis, Paris 4, 2011. http://www.theses.fr/2011PA040070.

Der volle Inhalt der Quelle

Annotation:

Au cours du XIXe siècle, la facture d'orgue française s'épanouit. Des petites manufactures, comme celle des Krischer à Rouen, prospèrent malgré l'influence des plus grandes. Facteur d'orgue le plus réputé, Aristide Cavaillé-Coll construit presque tous les grands instruments français de l'époque. La facture d'orgues fait partie des professions où le savoir se transmet de génération en génération : ce fut le cas des facteurs Isnard ou Cavaillé-Coll. Il en sera même pour la famille Krischer : depuis Henry-Jean Krischer jusqu'à ses arrières petits-enfants, on peut relever au moins sept personnes qui ont pratiqué ce métier. Fils d'une famille originaire de Nideggen, près d'Aix-la-Chapelle, Jean-Hubert Krischer est facteur d'orgue à Paris, père de deux facteurs d'orgues : Marie-Joseph, et Hubert François. Ce dernier a notamment travaillé dans les ateliers parisiens des manufactures Merklin, Cavaillé-Coll et Martin, avant de monter sa propre fabrique en 1873 à Rouen, où ses descendants (Georges, Henry, Ernest et Paul) apprendront le métier. Dans cette thèse, plusieurs points seront abordés pour définir les esthétiques des instruments des Krischer : après avoir présenté toute la famille de ces facteurs d'orgues, nous nous intéresserons à l'épanouissement de cette manufacture d'orgues en France, en étudiant ses activités depuis 1860 jusqu'environ 1934. Nous décrirons aussi les instruments ayant eu des contacts avec ces facteurs, en notant les caractéristiques générales et les aspects typiques des instruments Krischer. Enfin, après la disparition des Krischer, nous poursuivrons l'étude de leurs orgues jusqu'à nos jours, en présentant comment ils survivent ou non dans l'Histoire
In the XIXth century, the French organ building expanded. Small manufactures, like the Krischer manufacture in Rouen, flourished in spite of the influence of larger manufactures. Regarded as the most renowned organ builder, Aristide Cavaillé-Coll built almost all the French large instruments at that time. The organ building belongs to those trades for which knowledge is transmitted from generation to generation, as it was the case for the Isnard or the Cavaillé-Coll builders. It was the same for the Krischer family: since Henry-Jean Krischer up to his great-grandchildren, we can pick out at least seven people who practised this trade. Jean-Hubert Krischer, who was the son of a family native to Nideggen near Aix-la-Chapelle, was an organ builder in Paris and was the father of two organ builders, Marie-Joseph, and Hubert François. The latter had more particularly worked in the Parisian workshops of the Merklin, Cavaillé-Coll and Martin manufactures, before creating his own manufacture in Rouen in 1873, where his descendants (Georges, Henry, Ernest and Paul) would learn the job. In this thesis, several points will be approached to define the aesthetics of the Krischer instruments: after having introduced the whole family of these organ builders, we will be interested in the expansion of this organ manufacture in France, by studying its activities from 1860 to approximately 1934. We will also describe all the instruments, by noting their characteristics of the Krischer instruments. Finally, after the disappearance of the Krischer manufacture, we will continue the study of the history of their organs until now, by showing how they did survive or not in History

APA, Harvard, Vancouver, ISO und andere Zitierweisen

Tomlinson, Richard J. „Lens design for manufacture“. Thesis, Loughborough University, 2005. https://dspace.lboro.ac.uk/2134/14554.

Der volle Inhalt der Quelle

Annotation:

The manufacture of complete optical systems can be broken down into three distinct stages; the optical and mechanical design, the production of both optical and mechanical components and finally their assembly and test. The three stages must not be taken in isolation if the system is to fulfil its required optical performance at reasonable cost. This report looks first at the optical design phase. There are a number of different optical design computer packages on the market that optimise an optical system for optical performance. These packages can be used to generate the maximum manufacturing errors, or tolerances, which are permissible if the system is to meets its design requirement. There is obviously a close relationship between the manufacturing tolerances and the cost of the system, and an analysis of this relationship is presented in this report. There is also an attempt made to optimise the design of a simple optical system for cost along with optical performance. Once the design is complete the production phase begins and this report then examines the current techniques employed in the manufacture, and testing of optical components. There are numerous methods available to measure the surface form generated on optical elements ranging from simple test plates through to complex interferometers. The majority of these methods require the element to be removed from the manufacturing environment and are therefore not in-process techniques that would be the most desirable. The difficulties surrounding the measurement of aspheric surfaces are also discussed. Another common theme for the non-contact test techniques is the requirement to have a test or null plate which can either limit the range of surfaces the designer may chose from or increase the cost of the optical system as the test surface will first have to be manufactured. The development of the synthetic aperture interferometer is presented in this report. This technique provides a non-contact method of surface form measurement of aspheric surfaces without needing null or test plates. The final area to be addressed is the assembly and test stage. The current assembly methods are presented, with the most common industry standard method being to fully assemble the optical system prior to examining its performance. Also, a number of active alignment techniques are discussed including whether the alignment of the individual optical elements is checked, and if need be adjusted, during the assembly phase. In general these techniques rely upon the accuracy of manufacture of the mechanical components to facilitate the optical alignment of the system. Finally a computer aided optical alignment technique is presented which allows the optical alignment of the system to be brought within tolerance prior to the cementing in place of an outer casing. This method circumvents the need for very tight manufacturing tolerances on the mechanical components and also removes the otherwise labour intensive task of assembling and disassembling an optical system until the required level of performance is achieved.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

Gerber, Guillaume. „Designing for rapid manufacture“. Thesis, [Bloemfontein?] : Central University of Technology, Free State, 2008. http://hdl.handle.net/11462/42.

Der volle Inhalt der Quelle

Annotation:

Thesis (M. Tech.) -- Central University of Technology, Free State, 2008
As the tendency to use sol id freeform fabrication (SFF) technology for the manufacture of end use parts grew, so too did the need for a set of general guidelines that would aid designers with designs aimed specifically for rapid manufacture. Unfortunately, the revolutionary additive nature of SFF technology left certain fundamental principles of conventional design for manufacture and assembly outdated. This implied that whole chapters of theoretical work that had previously been done in this field had to be revised before it could be applied to rapid manufacturing. Furthermore, this additive nature of SFF technology seeded a series of new possibilities and new advantages that could be exploited in the manufacturing domain, and as a result drove design for rapid manufacturing principles even further apart from conventional design for manufacture and assembly philosophy. In this study the impact that rapid manufacture had on the conventional product development process and conventional design for manufacture and assembly guidelines were investigated. This investigation brought to light the inherent strengths and weaknesses of SFF, as well as the design for manufacture and assembly guidelines that became invalid, and consequently lead directly to the characterization of a set of design for rapid manufacture guidelines.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

Fozzard, Gary James Walter. „Simulation of clothing manufacture“. Thesis, Manchester Metropolitan University, 1989. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.329525.

Der volle Inhalt der Quelle

Annotation:

There is considerable pressure on the U.K. clothing industry to remain competitive in the face of foreign competition. Market forces and the trend of decreasing contract sizes have produced perceived problems with current methods of production which, coupled with the inertia to radical change, justify research. Computer simulation is an established production management tool but its potential in clothing manufacture could not be inferred. Concentrating on progressive bundle systems as the dominant method of production, this research considers the capacity of simulation in this context. Factory-based studies identified factors affecting system performance which allowed a conceptual model with high face validity to be defined. The requirement to handle complex supervisory control strategies led to the identification of visual interactive simulation as an experimental route. A computerised model, with an appropriate user interface and reporting facilities, was developed in the ~Siman si@ulat~£~~Dguage __ This was supported by animated graphics which played a substantial role in the attainment of face validity. Replication was considered to be essential for sound estimates of system performance to be obtained from this stochastic model but, as interactive control works against replication, steps were taken to reduce compromise. Software development facilitated an experimental technique that employed interaction to develop a control strategy, which then became embedded in the model for replication. By providing control consistency between replications, a more reliable assessment of system sensitivity to stochastic variability was possible. Pilot runs and single factor analysis enabled the effect of controllable factors on system performance to be quantified. Supervisory control was found to have a major effect on system performance so that the need for consistency in interaction was amplified. Considering alternative experimental methods and the practical use of the model, application areas for simulation in the absence of real time data capture were identified and demonstrated. Each application offered significant advantage over currently available planning methods and the use of simulation was supported. Information from the model can be gained about the design and control of progressive bundle lines at the pre-production phase, and the output of performance indicators can be useful in assessing real production lines. The evidence presented by this research illustrates that animated simulation can provide insight that is otherwise unobtainable.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

Al, Mortadi Noor. „Computer Aided Design/Aided Manufacture/Additive Manufacturing applications in the manufacture of dental appliances“. Thesis, Cardiff Metropolitan University, 2014. http://hdl.handle.net/10369/6527.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

Ates, Aylin. „Design, manufacture and engineering management“. Thesis, University of Strathclyde, 2008. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.501887.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

Galano, Marina L. „Manufacture and characterisation of nanoquasicrystalline“. Thesis, University of Oxford, 2006. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.534203.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

Harrison, D. „Adaptive techniques in robotic manufacture“. Thesis, University of Portsmouth, 1988. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.383286.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

Mehr Quellen

Bücher zum Thema "Manufacture"

Riddell, Roger. Manufacturing Africa: Performance & prospects of seven countries in sub-Saharan Africa. London: J. Currey, 1990.

Den vollen Inhalt der Quelle finden

APA, Harvard, Vancouver, ISO und andere Zitierweisen

Riddell, Roger. Manufacturing Africa: Performance & prospects of seven countries in Sub-Saharan Africa. London: Currey, 1990.

Den vollen Inhalt der Quelle finden

APA, Harvard, Vancouver, ISO und andere Zitierweisen

Whiteley, Peter R. Biscuit Manufacture. Boston, MA: Springer US, 1995. http://dx.doi.org/10.1007/978-1-4615-2037-5.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

Society, Bramley History. Leather manufacture. Leeds: Newsquest (Leeds) Ltd - Armley and Wortley Advertiser, 2005.

Den vollen Inhalt der Quelle finden

APA, Harvard, Vancouver, ISO und andere Zitierweisen

Stiles, Alvin B. Catalyst manufacture. 2. Aufl. New York: Dekker, 1995.

Den vollen Inhalt der Quelle finden

APA, Harvard, Vancouver, ISO und andere Zitierweisen

Engineers, Ingersoll, Hrsg. Integrated manufacture. Bedford: IFS, 1985.

Den vollen Inhalt der Quelle finden

APA, Harvard, Vancouver, ISO und andere Zitierweisen

1934-, Mortimer John, und Ingersoll Engineers, Hrsg. Integrated manufacture. [Kempston, Bedford], UK: IFS (Publications), 1985.

Den vollen Inhalt der Quelle finden

APA, Harvard, Vancouver, ISO und andere Zitierweisen

Black, Rod. Design and Manufacture. London: Macmillan Education UK, 1996. http://dx.doi.org/10.1007/978-1-349-13429-8.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

Fester. Practical LSD manufacture. 2. Aufl. Port Townsend, WA: Loompanics Unlimited, 1997.

Den vollen Inhalt der Quelle finden

APA, Harvard, Vancouver, ISO und andere Zitierweisen

Federation, International Dairy, Hrsg. Continuous butter manufacture. Bruxelles: International Dairy Federation, 1986.

Den vollen Inhalt der Quelle finden

APA, Harvard, Vancouver, ISO und andere Zitierweisen

Mehr Quellen

Buchteile zum Thema "Manufacture"

Berns, Hans, Valentin Gavriljuk und Sascha Riedner. „Manufacture“. In High Interstitial Stainless Austenitic Steels, 111–26. Berlin, Heidelberg: Springer Berlin Heidelberg, 2012. http://dx.doi.org/10.1007/978-3-642-33701-7_5.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

Therdthai, N., und Weibiao Zhou. „Manufacture“. In Bakery Products Science and Technology, 473–88. Chichester, UK: John Wiley & Sons, Ltd, 2014. http://dx.doi.org/10.1002/9781118792001.ch27.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

Minifie, Bernard W. „Chocolate Manufacture“. In Chocolate, Cocoa, and Confectionery, 135–64. Boston, MA: Springer US, 1989. http://dx.doi.org/10.1007/978-1-4899-5745-0_5.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

Robinson, R. K., und R. A. Wilbey. „Cheese manufacture“. In Cheesemaking Practice, 193–231. Boston, MA: Springer US, 1998. http://dx.doi.org/10.1007/978-1-4615-5819-4_13.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

Chen, Glory K. J., und Janglin Chen. „AMOLED Manufacture“. In Handbook of Visual Display Technology, 1779–97. Cham: Springer International Publishing, 2016. http://dx.doi.org/10.1007/978-3-319-14346-0_212.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

Chen, Glory K. J., und Janglin Chen. „AMOLED Manufacture“. In Handbook of Visual Display Technology, 1–19. Berlin, Heidelberg: Springer Berlin Heidelberg, 2015. http://dx.doi.org/10.1007/978-3-642-35947-7_212-1.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

Woolley, Steve. „Contract Manufacture“. In Process Understanding, 307–22. Weinheim, Germany: Wiley-VCH Verlag GmbH & Co. KGaA, 2011. http://dx.doi.org/10.1002/9783527637140.ch11.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

Haeberle, Michael. „Furniture Manufacture“. In Kanerva’s Occupational Dermatology, 1–10. Cham: Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-319-40221-5_156-2.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

Sherertz, E. F. „Furniture Manufacture“. In Handbook of Occupational Dermatology, 950–51. Berlin, Heidelberg: Springer Berlin Heidelberg, 2000. http://dx.doi.org/10.1007/978-3-662-07677-4_136.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

Conforti, Frank D. „Cake Manufacture“. In Bakery Products Science and Technology, 563–84. Chichester, UK: John Wiley & Sons, Ltd, 2014. http://dx.doi.org/10.1002/9781118792001.ch32.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

Konferenzberichte zum Thema "Manufacture"

Romero, Rodrigo, Claysson Vimieiro, Valéria Lopes, Mirella Gibson, Paulo Reis und Thiago Barrioni. „DYNAMIC ANALYSIS OF MECHANICAL HAND PROSTHESES MANUFACTURED BY ADDITIVE MANUFACTURE“. In 25th International Congress of Mechanical Engineering. ABCM, 2019. http://dx.doi.org/10.26678/abcm.cobem2019.cob2019-0389.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

McMillan, K. „Design for manufacture“. In IEE Colloquium on Design of Digital Cellular Handsets. IEE, 1998. http://dx.doi.org/10.1049/ic:19980238.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

Hamed, Hazem, Rolf Wüthrich und Jana D. Abou Ziki. „Electroforming of additively manufactured conductive molds for manufacture of miniature metal parts“. In Canadian Society for Mechanical Engineering International Congress 2023. Sherbrooke, Canada: Université de Sherbrooke. Faculté de génie, 2023. http://dx.doi.org/10.17118/11143/21055.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

PALUBISKI, Dominic R. „Composite forming post-manufacture: reducing complexity and de-risking manufacture“. In Material Forming. Materials Research Forum LLC, 2024. http://dx.doi.org/10.21741/9781644903131-49.

Der volle Inhalt der Quelle

Annotation:

Abstract. Forming is a high-risk operation as the deformation of precursors, such as preforms or prepregs, is difficult to control. Aiming at de-risking manufacturing and improving processing logistics, a new forming concept is presented involving pre-structuring, i.e. producing fully cured flat structure with integrated formable hinge regions, and assembly, where the part is given the targeted shape using localised forming in the hinge regions. Such a technique becomes feasible if (a) the hinges are produced with the aid of covalent adaptive networks (CANs, cross-linked polymers that can flow when heated above a certain temperature), (b) the excess fibre length (that can occur in the process of forming) is incorporated at the pre-structuring stage. Hence, we pursue an idea of multi-matrix continuously-reinforced composites (MMCRC) with embedded fibre path features, where the main body of composites structure is produced with a conventional epoxy matrix and the hinged areas are produced with reformable CANs. The current paper explores the potential and limitations of this technology in manufacturing trials. It is demonstrated that the presented concept can yield high quality solutions. It is highlighted that an improved manufacturing procedure using specially designed and portable machinery would enable application of the MMCRC technology in the field, facilitating repair and efficient transportation.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

Mdletshe, M., und M. Dewa. „PROCESS IMPROVEMENT FOR THE MANUFACTURE OF EXCAVATOR BUCKET FOR A CONSTRUCTION EQUIPMENT MANUFACTURER“. In 33rd Annual Southern African Institute of Industrial Engineering Conference. Waterkloof, Pretoria, South Africa: South African Institute for Industrial Engineering, 2022. http://dx.doi.org/10.52202/066390-0016.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

Ching, Su Lai, Kamarul Aini Mohd Sari und Rahmat Muslim. „Analysis of carbon footprint of transportation, food, and manufactured product in industrial manufacture“. In PROCEEDINGS OF THE INTERNATIONAL CONFERENCE ON GREEN ENGINEERING & TECHNOLOGY 2022 (ICONGETECH 2022). AIP Publishing, 2024. http://dx.doi.org/10.1063/5.0212365.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

Mellott, K., A. Bross und A. Pla-Dalmau. „Scintillator manufacture at Fermilab“. In The SCIFI97 conference on scintillating and fiber detectors. AIP, 1998. http://dx.doi.org/10.1063/1.56927.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

Willey, Ronald R. „Optical Design For Manufacture“. In OE/LASE '89, herausgegeben von Robert E. Fischer und Richard C. Juergens. SPIE, 1989. http://dx.doi.org/10.1117/12.951413.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

Ruch, Eric. „Manufacture of ISO mirrors“. In Orlando '91, Orlando, FL, herausgegeben von Pierre Y. Bely und James B. Breckinridge. SPIE, 1991. http://dx.doi.org/10.1117/12.46730.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

McFarland, Andrew W., Jonathan S. Colton, Daniel Cox und Steven Y. Liang. „Manufacture of Microcantilever Sensors“. In ASME 2005 International Mechanical Engineering Congress and Exposition. ASMEDC, 2005. http://dx.doi.org/10.1115/imece2005-81379.

Der volle Inhalt der Quelle

Annotation:

Mechanical micro machining is an emerging technology with many potential benefits and equally great challenges. The push to develop processes and tools capable of micro scale fabrication is a result of the widespread drive to reduce part and feature size. One important factor that contributes to the ability to machine at the microscale level is the overall size of the machine tool due to the effects of thermal, static, and dynamic stabilities. This paper explores the technical feasibility of miniaturized machine tools capable of fabricating features and parts on the micro scale in terms of depth of cut and part form accuracy. It develops a machine tool and examines its capabilities through benchmarking tests and the making of precision dies for the injection molding of microcantilever parts. The design and configuration of a miniaturized vertical machining center of overall dimension less than 300 mm on a side is presented and the component specifications discussed. The six axis machine has linear positioning resolution of 4 nm by 10 nm by 10 nm, with accuracy on the order of 0.3 μm, in the height, feed, and cross feed directions. The work volume as defined by the ranges of axes travel are 4 mm by 25 mm by 25 mm in the height, feed, and cross feed and 20 degrees in the rotational space. To quantify the performance capability of the miniaturized machine tool as a system, a series of evaluation tests were implemented based on linear and arch trajectories over a range of feed speed and depth of cut conditions. Test results suggest that micro level form accuracy and sub-micron level finish are generally achievable for parts with moderate curvature and gradient in the geometry under selected machining parameters and conditions. An injection mold was made of steel with this machine and plastic microcantilevers fabricated. Plastic microcantilevers are appropriate for sensing applications such as surface probe microscopy. The microcantilevers, made from polystyrene, were 464 to 755 μm long, 130 μm wide and only 6–9 μm thick. They showed very good uniformity, reproducibility, and appropriate mechanical response for use as sensors in surface force microscopy.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

Berichte der Organisationen zum Thema "Manufacture"

Angel, Roger. Advanced Manufacture of Reflectors. Office of Scientific and Technical Information (OSTI), Dezember 2014. http://dx.doi.org/10.2172/1165489.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

Tsai, Stephen W. Manufacture and Design of Composite Grids. Fort Belvoir, VA: Defense Technical Information Center, Juli 1997. http://dx.doi.org/10.21236/ada329659.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

Skone, Timothy J. Solid oxide fuel cell (SOFC) Manufacture. Office of Scientific and Technical Information (OSTI), Juni 2015. http://dx.doi.org/10.2172/1509449.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

Millar, Ross W., Anthony W. Arber, Javid Hamid und Robert M. Endsor. Elimination of Redwater Formation from TNT Manufacture. Fort Belvoir, VA: Defense Technical Information Center, Dezember 2007. http://dx.doi.org/10.21236/ada487270.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

Lawton, Cindy M. Develop and Manufacture an airlock sliding tray. Office of Scientific and Technical Information (OSTI), Februar 2014. http://dx.doi.org/10.2172/1122061.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

Tierney, J. W., und I. Wender. A novel process for manufacture of methanol. Office of Scientific and Technical Information (OSTI), Januar 1990. http://dx.doi.org/10.2172/5256006.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

Tierney, J. W., und I. Wender. A novel process for manufacture of methanol. Office of Scientific and Technical Information (OSTI), Januar 1990. http://dx.doi.org/10.2172/5163520.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

Post, Brian, Phillip Chesser, Alex Roschli, Alex Boulger, Jesse Heineman, Celeste Atkins, Peter Lloyd und Randall Lind. On-Site Manufacture of Large Cement Structures. Office of Scientific and Technical Information (OSTI), Oktober 2019. http://dx.doi.org/10.2172/1571844.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

Tierney, J. W., und I. Wender. A novel process for manufacture of methanol. Office of Scientific and Technical Information (OSTI), Januar 1990. http://dx.doi.org/10.2172/5791689.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

Miller, D. H. Cullet Manufacture Using the Cylindrical Induction Melter. Office of Scientific and Technical Information (OSTI), Januar 2000. http://dx.doi.org/10.2172/750863.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

Wir bieten Rabatte auf alle Premium-Pläne für Autoren, deren Werke in thematische Literatursammlungen aufgenommen wurden. Kontaktieren Sie uns, um einen einzigartigen Promo-Code zu erhalten!