Thematische Bibliographien / Kotel na dřevo / Dissertationen
Um die anderen Arten von Veröffentlichungen zu diesem Thema anzuzeigen, folgen Sie diesem Link: Kotel na dřevo.

Dissertationen zum Thema „Kotel na dřevo“

Autor: Grafiati
Veröffentlicht am 28. Juni 2021
Zuletzt aktualisiert am 1. Februar 2022

Geben Sie eine Quelle nach APA, MLA, Chicago, Harvard und anderen Zitierweisen an

Wählen Sie eine Art der Quelle aus:

Machen Sie sich mit Top-17 Dissertationen für die Forschung zum Thema "Kotel na dřevo" bekannt.

Neben jedem Werk im Literaturverzeichnis ist die Option "Zur Bibliographie hinzufügen" verfügbar. Nutzen Sie sie, wird Ihre bibliographische Angabe des gewählten Werkes nach der nötigen Zitierweise (APA, MLA, Harvard, Chicago, Vancouver usw.) automatisch gestaltet.

Sie können auch den vollen Text der wissenschaftlichen Publikation im PDF-Format herunterladen und eine Online-Annotation der Arbeit lesen, wenn die relevanten Parameter in den Metadaten verfügbar sind.

Sehen Sie die Dissertationen für verschiedene Spezialgebieten durch und erstellen Sie Ihre Bibliographie auf korrekte Weise.

1

Vitula, Michal. „parní kotel na dřevo výkonu 50t/h“. Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2012. http://www.nusl.cz/ntk/nusl-230144.

Der volle Inhalt der Quelle
Annotation:
Steam boiler for wood burning 50t/h In this diploma thesis I will deal design of the steam grate boiler 50t/h of burning clean wood. For the specified parameters make a stoichiometric calculations and calculate the enthalpy of the air and combustion. I shall calculate the heat balance, losses of boiler and thermal efficiency of the boiler. The following section make a design of the combustion chamber and its thermal calculation. After determining the dimensions of the combustion chamber further continue by calculating boiler moves and heating surfaces. Finally check the overall heat balance.
APA, Harvard, Vancouver, ISO und andere Zitierweisen
2

Dvořák, Aleš. „Navrhněte roštový parní kotel na spalování dřeva a hnědého uhlí(poměr mísení 30/70-dřevo)“. Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2014. http://www.nusl.cz/ntk/nusl-231252.

Der volle Inhalt der Quelle
Annotation:
This diploma work attends to presentation of steam grid boiler for wood and brown coal burning in scale (30/70-wood) in load 60t/h, with parametres of outgoing vapour p=7MPa, t=490°C. The work is splitted to several chapters. At the beginning I’m going to make stechiometric calculation and entalpic calculations of air and compustion gas. After that I’m going to calculate heat balance, losses of boiler and set heat efficiency of boiler. Then I’m going to suggest combustion chamber of boiler and make heat calculation. After suggestion of combustion chamber I’m going to set proportions of pulls and heat-delivery surface. In last chapter I’m giong to check heat balance. Inclosure of my work contains drawing documentation of steam boiler.
APA, Harvard, Vancouver, ISO und andere Zitierweisen
3

Dražka, Ondřej. „Roštový kotel na spalování kontaminovaného dřeva“. Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2020. http://www.nusl.cz/ntk/nusl-417507.

Der volle Inhalt der Quelle
Annotation:
The aim of the thesis is a design of a grate steam boiler with capacity of 35 t/h and output steam parameters with temperature 430 °C and pressure 4,1 MPa. The first part of the thesis deals with stoichiometric calculations and boiler efficiency. The theses mainly focuses on the heat transfer calculation and the geometric design of individual heat transfer surfaces. The specifics of fuel are taken into consideration. The drawing of the basic boiler scheme is a part of the thesis.
APA, Harvard, Vancouver, ISO und andere Zitierweisen
4

Dufek, Adam. „Kotel na spalování čistého dřeva 60t/h“. Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2011. http://www.nusl.cz/ntk/nusl-229444.

Der volle Inhalt der Quelle
Annotation:
The aim of the work is to design a plain wood combustion boiler of 60 t/h output. Fuelling component analysis has been added to the basic boiler parameters. Stechiometric calculations were performed for given fuel composition. Thermal efficiency was set after making thermal balance. Separate convective areas and boiler proportions were designed together with separate steam output parameters (temperature, pressure, amount). Design documentation was added.
APA, Harvard, Vancouver, ISO und andere Zitierweisen
5

Mazal, Lubomir. „Parní kotel na spalování kontaminovaného dřeva“. Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2010. http://www.nusl.cz/ntk/nusl-229323.

Der volle Inhalt der Quelle
Annotation:
The threat of depletion of fossil fuels is the driving force to diversify energy sources in the Czech Republic respectively in the European Union but also worldwide. One of these potential sources are being biomass boilers. The construction of these boilers has expanded in recent years because of government support for the construction of clean energy sources. Whether it is a burning of clean biomass or just incorporation of biomass to fossil fuels, teh substitution of fossil fuels and biomass boilers are the ideal solution. Their major advantages include significant reductions in emissions, mainly sulfur compounds, organic closure of the cycle of CO2 and disposal costs of spent residue.
APA, Harvard, Vancouver, ISO und andere Zitierweisen
6

Lauš, Ladislav. „Roštový kotel s přirozenou cirkulací na spalování směsi dřeva a hnědého uhlí“. Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2015. http://www.nusl.cz/ntk/nusl-232156.

Der volle Inhalt der Quelle
Annotation:
The work deals with the constructional and calculation design of the boiler for burning wood and combustion coal in scale (30/70-coal), in load 50 t/h, parameters of steam output p=7,5 MPa, t=480 °C and a temperature of feed water 105 °C. It is a boiler with natural water circulation by evaporation surfaces. In proposal first steichiometric calculations and enthalpic calculations of air and flue gas are performed. Then it is calculated heat balance, the boiler losses and the thermal efficiency is determined. After designing the combustion chamber and dimensions of pulls are determined. In last chapter the overall energy balance are checked. Drawing documentation of steam boiler is a part of the work.
APA, Harvard, Vancouver, ISO und andere Zitierweisen
7

Chmelíček, Jiří. „Kotel na spalování dřeva s hnědým uhlí (váhový poměr 50/50),30t/h“. Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2013. http://www.nusl.cz/ntk/nusl-230900.

Der volle Inhalt der Quelle
Annotation:
This master´s thesis deals with the constructional and calculation design of the boiler for burning wood and sub-bituminous coal. The work is divided into several parts. First, stoichiometrics calculation and enthalpy calculations of air and flue gas are performed. It is calculated heat balance of the boiler, the boiler losses and the thermal efficiency of the boiler is determined. After designing the combustion chamber thermal calculation is made. Then, the dimensions and individual heating surfaces are proposed. At the end of the calculations are controlling the overall energy balance.
APA, Harvard, Vancouver, ISO und andere Zitierweisen
8

Král, Ondřej. „Návrh roštového kotle s přirozenou cirkulací na spalování kontaminovaného dřeva“. Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2017. http://www.nusl.cz/ntk/nusl-319277.

Der volle Inhalt der Quelle
Annotation:
The master´s thesis deals with steam boiler design that burns contaminated wood with output 55 tons of steam per hour, steam pressure 4,2 MPa and temperature 423 °C. First two chapters focuses on stoichiometry and calculation of heat losses and boiler efficiency. Great part of thesis constitutes of thermal and dimensional calculations of every heat transfer surface. Some specific boiler parts are described considering special fuel properties. Final chapters contain pressure losses calculation of flue gas and heated medium for pumps and fans design. Drawing is also part of the work which is included as an attachment.
APA, Harvard, Vancouver, ISO und andere Zitierweisen
9

Polák, Aleš. „Konstrukce zařízení pro automatické plnění kotle dřevem s navržením automatizace a regulace přikládání“. Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2015. http://www.nusl.cz/ntk/nusl-231775.

Der volle Inhalt der Quelle
Annotation:
This thesis describes the structural design of automatic stoking conveyor to log into the boiler during operation. The work described in the first part of the current methods of burning logs of wood, the combustion process and the possibility of smoke detecting. The second part focuses on the structural design of the device and a description of the implementation of functional sample.
APA, Harvard, Vancouver, ISO und andere Zitierweisen
10

Nejerál, Michal. „Návrh vytápění a větrání pro rekonstruovaný rodinný dům“. Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2021. http://www.nusl.cz/ntk/nusl-442840.

Der volle Inhalt der Quelle
Annotation:
The main goal of the diploma thesis is to design a new ventilation and heating system in an old house after its reconstruction. The design also includes consideration of the possibility of using renewable resources. A central heat recovery ventilation systém is designed to ensure ventilation of the building. The heating design is based on two independent heat sources. It is a wood boiler and a gas condensing boiler. After considering renewable sources, a photovoltaic system is designed. The results of individual calculations and drawing documentation of designs are also attached.
APA, Harvard, Vancouver, ISO und andere Zitierweisen
11

Jakeš, Pavel. „Roštový kotel na spalování dřeva“. Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2010. http://www.nusl.cz/ntk/nusl-228960.

Der volle Inhalt der Quelle
Annotation:
This diploma thesis deals with proposal of the steam boiler on combustion uncontaminated wood. For the specified parameters have been implemented stoichiometric calculations and calculations enthalpy burnt gas. In the next part have been dealt with heat balance of the boiler, the efficiency of the boiler, design of the combustion chamber and calculation of particular rating surfaces. The output parametres are temperature, pressure and the amount of steam.
APA, Harvard, Vancouver, ISO und andere Zitierweisen
12

Umýsa, Radovan. „Kotel na spalování čistého dřeva 60t/h“. Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2011. http://www.nusl.cz/ntk/nusl-229405.

Der volle Inhalt der Quelle
Annotation:
This diploma thesis deals constructional and calculation design of the steam boiler 60t/h of clean burning wood. For the parameters of the stoichiometric calculations are carried out and enthalpy calculations of combustion and air. The collected data is then made It a diagram of air and flue gas. The following are the calculations with the heat balance calculations of losses and determination of the boiler thermal efficiency of the boiler. It is made of the combustion chamber design and its thermal calculation. After determining the main dimensions of the combustion chamber moves continue the calculation of boiler heating surfaces. At the end of the calculations are controlling the overall energy balance. Boiler output parameters as temperature, pressure and quantity of the steam.
APA, Harvard, Vancouver, ISO und andere Zitierweisen
13

Mach, Ondřej. „Parní kotel na spalování dřeva 40t/h“. Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2012. http://www.nusl.cz/ntk/nusl-230308.

Der volle Inhalt der Quelle
Annotation:
The purpose of this Diploma Thesis is the construction design of the steam-boiler for the combustion of biomass – wood pellets. For the specified parameters have been defined stoichiometric calculations and calculations enthalpy burnt gas. In sequence, there is designed and solved the configuraion of the steam-boiler, so that the result design and the number of the heat-delivery surfaces can be determined, in dependence on the required inlet parametres of the air and outlet parametresof the water vapour. These parametres mean the amount, the temparature and the pressure. The aim of the thesis is to make a design of the steam.boiler burning biomass according to the set parametres. This very ecological fuel can really substitute the fossil fuel and friendly respect the environment.
APA, Harvard, Vancouver, ISO und andere Zitierweisen
14

Egerle, Dušan. „Kotelny na biomasu“. Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2013. http://www.nusl.cz/ntk/nusl-226022.

Der volle Inhalt der Quelle
Annotation:
The aim of this project is heating and warm water preparation for apartment block in Choceň (Pardubice region). Apartment block has three aboveground heated floors and one underground unheated floor. The heat source is gasifying firewood boiler or pellet boiler which is at the same time used for water heating but only in the winter time. The other parts of the year the solar collectors are installed and used for water heating. The heat source is located in detached room with its own access, in boiler room.
APA, Harvard, Vancouver, ISO und andere Zitierweisen
15

Loudilová, Martina. „Společenský dům - fara“. Master's thesis, Vysoké učení technické v Brně. Fakulta architektury, 2009. http://www.nusl.cz/ntk/nusl-215617.

Der volle Inhalt der Quelle
Annotation:
The theme of the dissertation is design of new building of community center with a vicarage. The building is designed as a flat for a vicar, office of a vicar, new rooms for meeting of the churchgoers and new garden. The vicarage is designed near of church. The vicagareis designed in an area, which is prepare for building of cottages. The old vicacare is in old house in the other part of street Kostelní, than is the church. Existing flat for the vicar is unsuitable. Theobject is designed with one or two floors. The object is designed of tree parts: living part – a flat of the vicar and a flat for visitors, a community center – a parish hall and a hygienic rooms, an office part – an office of a the vicar and a clubroom. All parts of building are divide with fiction, design and used materials. The building is designed with a traditional materials as wood, concrete, masonry. The shape of building is designed from three diferent blocks. An parish hall i designed with rectangle layout, in the hall are designed two windows. The north-west corner of hal lis designed higher than other part sof room, because this corner is situated to church. This window is designed with frame in cross shape. The second window is connection between the garden and hall. The external fasade is designed from smooth concrete with links, that are designed in cross kapes. The links are designe as some crosses, that are designed in gold section. The office of vicar is designed with wood arc beams. The external fasade is designed from titanzinc sheets. The fasade is designed as wall and roof. The end fasades are designed from glass walls, because wood beams are a dominant of this part of building. The living part of building is designed with two floors. Th structure is designed with traditional technologies from masonry and concrete or wood slabs.
APA, Harvard, Vancouver, ISO und andere Zitierweisen
16

Bortlová, Kateřina. „Architektonická studie sakrálního objektu a komunitního centra Salesiánského Brno - Líšeň“. Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2021. http://www.nusl.cz/ntk/nusl-443679.

Der volle Inhalt der Quelle
Annotation:
The content of the diploma thesis was an architectural study of a sacral building in Brno - Líšeň. The subject of the study was the elaboration of an ideological design of a sacral complex, which consisted of a church and a parish. The main operator of the whole complex will be the Salesian community, whose background is in close proximity to the area. The basic idea of the design was to design a spiritual place, which in its form conveys clear information about the use of the object and at the same time supports the development of ideas of the Salesian community. It is a structure that conveys the mission itself, not by one element, but by a set of several elements that together create a story, vision, mission. The ideological solution in this case thus becomes an equilateral triangle, which symbolizes the Father, the Son and the Holy Spirit. With its dominant vertical direction facing the sky, the object symbolically points to the spiritual path and self-realization. The given area is solved as a complex, the elements of which complement each other and thus create a harmonious whole. The design creates a space for both liturgical celebrations in the interior and exterior, which is used by the outdoor presbytery, which is complemented by residential stairs. These elements are intended to encourage residents to meet and establish friendly relations.
APA, Harvard, Vancouver, ISO und andere Zitierweisen
17

PODROUŽKOVÁ, Petra. „Moderní sakrální architektura“. Master's thesis, 2013. http://www.nusl.cz/ntk/nusl-152618.

Der volle Inhalt der Quelle
Annotation:
The thesis deals with European sacral architecture of the twentieth and the twenty-first century. Particularly, it refers to Judaic, Roman-Catholic and Islamic buildings. The second part puts into historical context the sacral constructions of individual religions including their function, characters and typology. In the third part of this thesis the representative sample of significant modern sacral constructions is selected, always under circumstances regarding their creation, the urban description and the setting in a specific location as well as the architectural layout, the interior arrangment and a possible use of special technological procedures at their construction. The mutual comparison and the evaluation of the modern European sacral architecture development are carried out in the fourth part. This section notices the function and the usage of light and presents some extraordinary buildings from this point of view. The final fifth part tries to answer the question, how a modern temple should look like.
APA, Harvard, Vancouver, ISO und andere Zitierweisen
Wir bieten Rabatte auf alle Premium-Pläne für Autoren, deren Werke in thematische Literatursammlungen aufgenommen wurden. Kontaktieren Sie uns, um einen einzigartigen Promo-Code zu erhalten!

Zur Bibliographie