Auswahl der wissenschaftlichen Literatur zum Thema „Kancelářský objekt“

This thesis deals with an architectural case study of the administrative building called Office Špitálka in the Svitava industrial zone bordered by the Svitava River in the east, Ring Road in the west, Milady Horákové Street in the north and Zvonařka Street in the south. Špitálka Smart City is located right in the centre of this area. The thesis is modelled on the Centre of the Špitálka Smart City urban study, that was the outcome of the pre-thesis seminar in the winter term 2020/21. The main feature of the building is it's futuristic design and modern concept. Apart from offices there are also spaces for commerce, eating, leisure activities or relaxation. The key atributes are the open-air atrium and the building being in direct connection to the new "Smart City“ quarter.

This diploma thesis deals with a new built office building in Brno-Husovice. The building is situated in a gap site on the street Dukelská třída. The building has four aboveground floors and underground garages. The ground floor is divided into relaxation area and a commercial section with five shopping units. The second and the third floor are designed as a variable office space. The engine room for ventilation is situated on the fourth floor. Construction system is cast-in-place concrete frame. The building is roofed with the green roofs. Foundations are made of large diameter drilled piles.

The subject of this diploma thesis is the architectural design of Skyscraper "EVO" (experimental high-rise building) located in Brno. The building integrates various functions (residential, restaurant, shops, office space and gallery) at relatively small built-up area. The aim of the thesis is to create the design of a high-rise building with appropriate scale and which creates space for interconnection of different functions and will become new dominant of the city. The proposed building is located in the part of the city called Veveří. The building site is defined by Šumavská and Veveří streets. The building is designed as a single rectangular prism shaped volume. The entrances to the building are at the level of surrounding terrain. The building has 31 aboveground floors and 9 underground floors. The simple shape of building is structured by horizontal bands of consoles which create shields against excessive sun exposure and vertical atriums embedded in the main volume. These atriums connect interior and exterior. This atrium create connection between interior and exterior and ease the penetration of natural daylight inside the building. The dominant material used is glass, which is applied both in exterior and interior. The glass used on glazing of atrium sis colored transparent photovoltaic glass. Bands are in white color.

The Master’s thesis on the theme „Multi function house“ is drafted as a building documentation according to the relevant laws and standards. The project processes a documentation of a new multi fiction apartment house construction with overall 16 flats. Their sizes are from a flat 2+1 to a flat with 4 rooms and kitchenette. Every flat has a garage and a cellar in the first floor. In the house there are 2 offices with a capacity about 12 employees and also 3 commercial premises. Hairdressing parlor and an Apple store are going to by situated into two smaller premises. In the last premise with 263 m2 of floorspace there is going to be a cycling shop. The project is designed as a brick building without basement. The building has two parts with four floors and these parts are united by a single-storey part. The whole building is symetric. The roof is designed as a platform with tend of 3%. On top of the first floor there is going to be a vegetation roof and a roof teracce with a flagging. On the fourth floor there are going to be roof teracces with ceramic pavement. Over the fourth floor there is going to be a roof cllading laden by pebbles. The house is situated in the town Kroměříž, in the pacific neighbourhood near to the historical town center. The neighbourhood of the object is determined for a building-up of family houses. Nearby the house there is a primary school and an athletic ground. The brick object is designed by a construction system Livetherm on the wall footings. The ceiling constructions are from concrete. The Master’s thesis is made as a project realization of building construction part with studies and design fundamentals. The part of the thesis is also the thermal technical recognition, fire recognition of the object and concept of canalization.

The project documentation, processed in the framework of the diploma thesis, solves the new building of the administrative building of the building company in the village Lukov u Moravských Budějovic. The building is made of traditional brick technology therm tl. 50 cm, without insulation, ceilings are reinforced concrete, flat roof, vegetation. Vegetation is also part of the facade of the building, which at the same time serves as a root cleaner. The philosophy of the whole design is to create a high-quality working environment for building company employees, a pleasant environment for customers and to best solve the environmental footprint of the building. The building is designed as a modern office building, with space for leisure activities of staff and their visits, taking into account the responsible approach to the development industrial site and the surrounding nature. The building efficiently manages potable, rain and wastewater, the envelope of the building, and the individual structures are designed to make the entire building as energy-consuming as possible, and do not pump irreparably by nature its natural resources in a larger quantity than necessary.

This thesis deals with design of new product in field of office furniture. The product should, firstly comply with trends of development and transformations of office environment and, secondly, be producible using up-to-date technological equipment a company. The aim is this thesis is to create a concept of product, together with a prototype which might be included in a product-portfolio HON a.s. company. My thesis includes six crucial parts: The first presents historical context containing tendencies in dealing with office space and environment. The second deals with environmental and behavioural background of office projects, and its principal output is presented as a design and realisation of one office using knowledge incoming from wide bibliography. Philosophy and strategy of HON a.s. company, as well as a furniture trade investigation are described in the third part. In the fourth part I describe technology equipment and used materials in the company. The fifth part deals with final design of furniture object. Herein I describe my mind process of creation of office reception desk as a furniture office supplement. The process is explained using mind maps, concepts, drafts and 3D visualisations resulting in a prototype output and also strategy of presentation. The sixth part includes discussion which deals with questions about use and assertion in the office trade and practice.

This thesis attempts to forecast investment volumes of the commercial real estate market in the Czech Republic in the medium-term from 2017 to 2020, using both qualitative methods and econometric models. Fundamental analysis and chart analysis are employed while judgemental forecasts by market experts are collected. In order to find evidence of historical and upcoming commercial asset price bubbles, a state-of-the-art peak-tagging technique and chart analysis for the graph of commercial real estate capital value index are used before integrating with market specialists' opinions. Neither CRE bubble nor signal for future major downturn has been found since 2000 despite the occurance of minor overpricing periods. ARIMA and several VAR models with endogenous and exogenous variables are run to find the best quantitative forecasts. Final forecasted investment volume for the upcoming years is found by integrating experts' opinion and results from the chosen model. JEL Classification R33 Keywords commercial real estate, investment, investment volumes, prime yields, office properties, shopping centres, industrial properties, Czech Republic Author's e-mail 88176426@fsv.cuni.cz Supervisor's e-mail tomas.jandik@reicofunds.cz