Dissertationen: „Kamata“

1

Debnath, Pabitra Kumar. „Religion and religious establishment of Kamata - Koch kingdom“. Thesis, University of North Bengal, 1993. http://hdl.handle.net/123456789/1235.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

2

Sen, Partha Kumar. „Study of some aspects of history of Kamata-Kochbehar since 1772 to the date of accession of Sivendranarayana“. Thesis, University of North Bengal, 1989. http://hdl.handle.net/123456789/1251.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

3

Guha, Roy Shyamal Chandra. „Study of some aspects of the history of Kamata-Koch Bihar“. Thesis, University of North Bengal, 1985. http://ir.nbu.ac.in/handle/123456789/5097.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

4

Ahmed, Irshad Gulam. „Kamala Das:a study of her Poetic Pilgrimage“. Thesis, University of North Bengal, 1999. http://hdl.handle.net/123456789/1137.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

5

Kamala, R. „Studies on salinity induced stress on neurosecretory cells, protein, free amino acid content and ammonia excretion rate of penaeid prawn Metapenaeus monoceros (Fabricius)“. Thesis, Central Marine Fisheries Research Institute, 1989. http://eprints.cmfri.org.in/11074/1/Kamala%20R..pdf.

Der volle Inhalt der Quelle

Annotation:

An important adaptation in organisms to withstand osmotic variations in their external medium, is their efficiency of regulating intracellular concentration. In this context, cell volume regulation appears as a fundamental mechanism. The problem of cell volume regulation becomes crucial in the establishment of organisms in aquatic environment with fluctuating osmolarities.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

6

Berg, Bring Josefine. „Fart Kamrat“. Thesis, KTH, Arkitektur, 2016. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-188192.

Der volle Inhalt der Quelle

Annotation:

Rörelse och den sociala samvaron ligger i fokus i förskolans pedagogik och byggnaden är utformad för att understödja det med hjälp av dess form, öppenhet, och flexibilitet. Möjligheten att ändra salarnas storlek gör rummen mer användbara utifrån olika behov som uppstår i undervisningen och leken. Den nedsänkta huskroppen formar en kuperad och varierad omkringliggande miljö som uppmuntrar barnen till spring och lek. Den invändiga öppna planlösningen och alla gemensamma utrymmen skapar möjlighet till många möten mellan alla barnen och skapar en gemenskap.
Movement and social interaction are the main focus of this preschools philosophy, and the building is designed to support that with the help of its shape, transparency, and flexibility. The ability to change the size of the rooms makes the areas more useful based on different needs that arise in the education and the children’s play. The underground part of the building forms a hilly and varied surrounding environment that encourages kids to run and play. The interior open floor plan and all common areas create the opportunity for many meetings between all the children and it creates a community.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

7

Alvares, Bedoya Jose Enrique, Machari Pedro Junior Churampi, Aranguez Michael Jeanpierre García, Camac Alberto Toro und Robles Wendy Diana Velarde. „Kamari Regalos“. Bachelor's thesis, Universidad Peruana de Ciencias Aplicadas (UPC), 2020. http://hdl.handle.net/10757/652933.

Der volle Inhalt der Quelle

Annotation:

El presente trabajo ha sido elaborado bajo la identificación de una problemática que enfrentan en su día a día muchas personas, a quienes en adelante se llamará público objetivo. La propuesta de este trabajo es ofrecer al mercado un sitio web donde ellos puedan encontrar paquetes de regalos, los cuales contengan un mix de productos que se adapte a los gustos y preferencias de la persona a quien piensan dirigir el regalo. Se considero los paquetes de regalos pues en la actualidad en el mercado de regalos y/o obsequios los usuarios suelen buscar un mix de productos en un solo lugar pues esto reduce el tiempo de búsqueda de un regalo en tiendas independientes y lo más importante, produce un ahorro en sus bolsillos. Ese fue el motivo por el cual se consideró un mercado atractivo que aún puede mejorar ofreciendo alternativas de compra llamativas que se adapten a los gustos de los interesados. Es por ello que nació Kamari, una tienda de regalos online en la cual se puede elegir entre una serie de distintos paquetes a regalar dependiendo de la ocasión e incluso cambiar ciertos productos del paquete seleccionado, haciéndolo personalizable para el cliente. Cabe mencionar que para corroborar la viabilidad de este proyecto el equipo de trabajo ha elaborado experimentos para la validación del proyecto a pesar de la situación actual que se vive a nivel mundial, logrando como resultado un proyecto viable.
This work has been prepared under the identification of a problem that many people face in their day-to-day life, who from now on will be called the target audience. The proposal of this work is to offer the market a website where they can find gift packages, which contain a mix of products that adapts to the tastes and preferences of the person to whom they plan to direct the gift. Gift packages were considered as currently in the market for gifts and / or gifts, users often look for a mix of products in one place as this reduces the time of searching for a gift in independent stores and most importantly, produces a savings in customer´s pockets. That was the reason why it was considered an attractive market that can still improve by offering eye-catching purchasing alternatives that suit the tastes of those interested. That is why Kamari was born, an online gift store where you can choose between a series of different packages to give away depending on the occasion and even change certain products from the selected package, making it customizable for the client. It is worth mentioning that to corroborate the viability of this project, the work team has carried out experiments for the validation of the project despite the current situation worldwide, achieving as a result a viable project.
Trabajo de investigación

APA, Harvard, Vancouver, ISO und andere Zitierweisen

8

Gogol, František. „Inteligentní kamera“. Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2008. http://www.nusl.cz/ntk/nusl-217458.

Der volle Inhalt der Quelle

Annotation:

An intelligent camera includes a processor, which can extract information from images without the need for an external processing unit, and interface devices used to make the results available to other devices. This paper describes the intelligent camera design and implementation into the Field Programmable Gate Array (FPGA). The implemented architecture contains a camera controller, a memory controller, an IIC controller, a VGA controller, and an execution unit. The camera controller communicates with a CMOS chip. The memory controller communicates with a DDR SDRAM memory. The IIC controller is the interface between a PLB bus and an IIC bus. The VGA controller takes data from the memory and transform them into the VGA format (640x480, 60 Hz). The execution unit extracts the image data from the memory. These data are processed by hardware pixel by pixel, which results in a modified image. The camera units has been implemented in the VHDL and Verilog languages.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

9

Sen, Sipra. „The Poetic World of Kamala Das:a thematic study“. Thesis, University of North Bengal, 1999. http://hdl.handle.net/123456789/1136.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

10

Grahl, João Arthur Pugsley. „Kamakã em Prolog“. reponame:Repositório Institucional da UFPR, 2009. http://hdl.handle.net/1884/18004.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

11

Chvála, Jan. „Android IP kamera“. Master's thesis, Vysoké učení technické v Brně. Fakulta informačních technologií, 2015. http://www.nusl.cz/ntk/nusl-234969.

Der volle Inhalt der Quelle

Annotation:

The goal of this thesis is to design a system which would allow video data streaming from a mobile device and real time playback using a standard web browser. The technological background and the implementation platform are both part of this thesis. Web Real Time Communications (WebRTC) technology was used for acquiring multimedia data on mobile device. This technology is natively supported in the latest major web browsers and in WebView component (Android version 5.0 and above). Sending push notifications from a server to a mobile device to start the streaming is done with Google Cloud Messaging technology. The resultant system allows a user to start the application on mobile device with easy web browser access. This starts the multimedia stream from device, which can be parametrized and secured by password. The benefit of this thesis is the overview of WebRTC technology and its demonstration. The IP camera implementation shows how easy it is to use the WebRTC in real applications.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

12

Johansson, Henrik. „Realtidsstyrning av IP-kamera“. Thesis, Automatic Control, 2009. http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-19737.

Der volle Inhalt der Quelle

Annotation:

The final thesis named Tracking in Sensor Networks was created by the company Instrument control Sweden. The thesis work is to create a plug-in to an already developed software pro- gram, SkyView. Via the software program one should be able to control an IP-camera from AXIS, model 215 PTZ, with the appropriate protocol over a network. An Application Programming Interface, API, was used to easily control the camera through SkyView. The interface is called VAPIX and is used to all cameras from AXIS. VAPIX sup- ports Hyper Text Transfer Protocol, HTTP, and Real Time Streaming Protocol, RTSP. The video was sent through the camera with RTSP, thus an investigation resulted in that the protocol was best suited at streaming video. Steering commands to the camera was sent via HTTP. A small program was written, which was then integrated to SkyView. Features to be able to control the camera with the keyboard, mouse and a joystick were implemented. Zoom, bright- ness, focus and some more features were also added. The problem with the delay should be dealt with as soon as possible.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

13

Paunksnis, Mantas. „UAB “Kamesta” verslo plėtra“. Master's thesis, Lithuanian Academic Libraries Network (LABT), 2009. http://vddb.library.lt/obj/LT-eLABa-0001:E.02~2009~D_20090603_100108-89667.

Der volle Inhalt der Quelle

Annotation:

Tyrimo objektas yra UAB “Kamesta”. Darbe analizuojama įmonės gamybiniai techniniai pajėgumai, organizacinė valdymo struktūra, kokybės ir aplinkosaugos sistemų diegimas, rinkos galimybės, konkurencinė aplinka bei verslo plėtros strategija. Tyrimui naudota įvairi mokslinė literatūra, statistiniai duomenys, internetiniai šaltiniai bei UAB “Kamesta” asmeniniai dokumentai. Duomenys pateikiami ne tik teoriniu, bet ir grafiniu būdu. Darbe yra lentelių bei vaizdinės medžiagos. Atlikus literatūros analizę, pateikiami gauti tyrimo rezultatai, kuriuose atsispindi įmonės veiklos raida ir dabartis, turima technika ir pajėgumai bei valdymo struktūra. Remiantis šiais duomenimis, formuojama UAB “Kamesta” veiklos strategija. Analizuojama įmonės investicijų politika, kokybės bei aplinkosaugos sistemų diegimas. Toliau suformuojamos pagrindinės įmonės verslo kryptys, į kurias įmonė labiausiai yra orientuota. Remiantis gautais duomenimis, atliekama rinkos analizė, kurios tikslas yra nustatyti UAB “Kamesta” paslaugų poreikį visuomenėje ir pagrindinius jos užsakovus. O kur yra paklausa, ten visuomet yra ir konkurencija, todėl toliau atliekama konkurencinės aplinkos analizė, įvardijant pagrindinius įmonės konkurentus, jų tikslus, siekius bei galimybes. Išanalizavus visas įmonės grandis, visi duomenys sutraukiami į kelis pagrindinius rodiklius, kurie atspindi įmonės finansinę būklę. Kitaip tariant, atliekama įmonės finansinė analizė, kurios metu palyginami pelningų 2007 m. rezultatai su praėjusių 20... [toliau žr. visą tekstą]
An object of a research is UAB “Kamesta”. In this work industrial technical capacities, organizing management structure and environment protection systems installation, market opportunities, competitive environment and business development strategy of a company there are analysed. Various scientific literature, statistic data, internet sources and personal documents of the UAB “Kamesta” there were used for this research. The data is presented not only in theoretical method, also graphic. There are also tables and images presented in this work. When analysed the literature, the obtained results of the research are presented. The development and the present of a company, its owned technology, capacity and management structure are reflected in the results of a research. The activity strategy UAB “Kamesta” is based on this data. Company’s investments politics, quality and environment protection systems installation there are analysed. Further, the main company’s business directions into which the company is orientated are formed. Referine to the received data, the market analysis is performed. The purpose of the analysis is to establish the requirement of services and the main customers of UAB “Kamesta”. Where there is a demand, the competition also exist, therefore, the analysis of the competitive environment has been carried out by identifying the main company’s competitors, their goals, aspirations and possibilities. When analysed all the links of the company, all the data... [to full text]

APA, Harvard, Vancouver, ISO und andere Zitierweisen

14

Zetterlund, Joel. „Objektföljning med roterbar kamera“. Thesis, KTH, Hälsoinformatik och logistik, 2021. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-296495.

Der volle Inhalt der Quelle

Annotation:

Idag är det vanligt att det sker filmning av evenemang utan att man använder sig av en professionell videofotograf. Det kan vara knatteligans fotbollsmatch, konferensmöten, undervisning eller YouTube-klipp. För att slippa ha en kameraman kan man använda sig av något som kallas för objektföljningskameror. Det är en kamera som kan följa ett objekts position över tid utan att en kameraman styr kameran. I detta examensarbete beskrivs hur objektföljning fungerar, samt görs en jämförelse mellan objektföljningskameror med datorseende och en kameraman. För att kunna jämföra de mot varandra har en prototyp byggts. Prototypen består av en Raspberry Pi 4B med MOSSE som är en objektföljningsalgoritm och SSD300 som är en detekteringsalgoritm inom datorseende. Styrningen består av en gimbal som består av tre borstlösa motorer som styr kameran med en regulator. Resultatet blev en prototyp som klarar av att följa en person som promenerar i maximalt 100 pixlar per sekund eller 1 meter per sekund i helbild, med en maxdistans på 11,4 meter utomhus. Medan en kameraman klarar av att följa en person i 300–800 pixlar per sekund eller 3 meter per sekund. Prototypen är inte lika bra som en ka-meraman men kan användas för att följa en person som undervisar och går långsamt. Under förutsättningen att prototypen är robust vilket inte är fallet. För att få bättre resultat behövs starkare processor och bättre algoritmer än som använts med prototypen. Då ett stort problem var att uppdateringshastigheten var låg för detekteringsalgoritmen.
Today, it is common for events to be filmed without the use of a professional video photographer. It can be the little league football game, conference meetings, teaching or YouTube clips. To film without a cameraman, you can use something called object tracking cameras. It is a camera that can follow an object's position without a cameraman.This thesis describes how object tracking works as well as comparison between ob-ject tracking cameras with computer vision and a cameraman. In order to compare them against each other, a prototype has been developed. The prototype consists of a Raspberry Pi 4B with MOSSE which is an object tracking algorithm and SSD300 which is a detection algorithm in computer vision. The steering consists of a gimbal consisting of three brushless motors that control the camera with a regulator. The result was a prototype capable of following a person walking at a maximum speed 100 pixels per second or 1 meter per second in full screen, with a maximum distance of 11.4 meters outdoors. While a cameraman managed to follow a person at 300-800 pixels per second or 3 meters per second. The prototype is not as good as a cameraman but can be used to follow a person who teaches and walks slowly. Under basis that the prototype is robust, which is not the case. To get better results, stronger processor and better algorithms are needed than used with the prototype. That’s because a big problem was that the refresh rate was low for the detection algorithm.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

15

Kristjansdottir, Selma. „Encoding and Decoding : Researching the controversy of Kamala Harris’ Vogue cover“. Thesis, Malmö universitet, Malmö högskola, Institutionen för konst, kultur och kommunikation (K3), 2021. http://urn.kb.se/resolve?urn=urn:nbn:se:mau:diva-43511.

Der volle Inhalt der Quelle

Annotation:

The purpose of this research is to examine how visual communication can be interpreted in different ways and even in opposition to the creator’s intention, and to understand how different visual signs in images convey meaning to explain audience’s oppositional reading. Through a qualitative methodological approach, a semiotic comparative analysis of two covers of the fashion magazine Vogue featuring Kamala Harris will be carried out, a digital cover and a print cover. Theoretically, the analysis is grounded in postcolonialism, representation, and Stuart Hall’s encoding and decoding model of communication. The results suggest that there are signs in the photograph on Vogue’s print cover that can be interpreted from a postcolonial perspective, and both oppositional and preferred readings are discussed.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

16

Treis, Yvonne. „A grammar of Kambaata (Ethiopia)“. Köln : Köppe, 2008. http://d-nb.info/989263932/04.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

17

Strömberg, Christoffer. „Elektromekanisk bildstabilisering för IR-kamera“. Thesis, KTH, Maskinkonstruktion (Inst.), 2008. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-100185.

Der volle Inhalt der Quelle

Annotation:

Under senare år har IR-kameror blivigt allt vanligare i kommersiella sammanhang. Detta beror framförallt på att priset på de detektorer som används för att mäta IR-strålning har sjunkigt och därmed även priset på kamerorna. IR-kameror avsedda för termografi har idag många likheter med digitalkameror för visuellt ljus och mycket av den funktionalitet som man finner hos dessa IR-kameror är hämtade från kameraindustrin. I och med det att de handhållna systems som används för termografi genererar bilder med bättre kvalitet börjar effekterna av ofrivilliga vibrationer, som till exempel handskak, att bli märkbara i mätresultaten. Detta märks framförallt när mätningar skall göras med hjälp av system bestyckade med smalvinkliga objektiv. Olika lösningar för optisk bildstabilisering är idag vanligt förekommande inom kameraindustrin. Lösningarna bygger ofta på att ett linselement i objektivet eller att hela bildsensorn kan förflyttas i sina respektive plan. I princip är detta även genomförbart för IR-kameror. Ännu en möjlig teknik är att med hjälp av en plan lins av betydande tjocklek förskjuta strålgången parallellt. Denna skiva placeras företrädelsevis mellan objektivet och bildsensorn och dess normal i förhållande till systemets optiska axel är justerbar. Denna teknik har, inom ramen för detta examensarbete, ej kunnat hittas bland befintliga system på marknaden. Då glas ej är transparent i IR-spektrumet används linser av germanium (Ge) i optiken för IR-kameror. Germaniumets höga brytningsindex gör att det lämpar sig mycket bra för applikationen. Den funktionsprototyp som detta examensarbetet lett fram till vinklar en plan germaniumskiva med hjälp av två DC-motorer baserat på information från två vinkelhastighetssensorer i syfte att motverkar effekterna från ofrivilligt skak av en värmekamera.
During recent years IR cameras have been seen more and more frequently used in commercial contexts. This is an effect of the price of the IR detectors which has been descending making the systems in all less expensive. IR cameras designed for thermography are in many aspects similar to digital cameras for and many of the functions found in theses IR-cameras comes from the camera industry. Since the handheld systems that are used as thermographs generates images with higher and higher resolution, the effects of undesired vibrations, such as hand shakings, are becoming noticeable in the results. This is especially observable for cameras equipped with lenses of a small field of view. Different methods for optical image stabilization are commonly appearing in the camera industry. The solutions are often based on a planar movement of an element within the lens, or the whole image sensor itself. Principally this would also be possible to implement on an IR camera. Another possible solution could be attained by using a planar lens element of significant thickness to get a parallel displacement of the light when the element is tilted. This element would preferably be placed between the lens and the image sensor of the camera. No cameras using this technique have been found on the market. Since glass is not transparent in the IR part of the spectrum lenses made of Germanium are used in thermograph systems. The high indices of refraction of Germanium make it very suitable for the above mentioned application. The prototype that this master thesis has resulted in shows that a planar Germanium lens which can be tilted by two DC motors based on the information from two angular rate sensors can reduce the effects of involuntary vibrations of an IR camera.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

18

Börjes, Markus. „Kontinuerlig autofokus för IR-kamera“. Thesis, KTH, Maskinkonstruktion (Inst.), 2008. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-100349.

Der volle Inhalt der Quelle

Annotation:

Detta examensarbete har omfattat utveckling och implementering av en kontinuerlig autofokus för en IR-kamera. En studie av olika tekniker för traditionella kameror har genomförts, och därigenom har olika metoder vilka även passar för en IR-kamera framkommit. En traditionell videokamera har också införskaffats och analyserats för att försöka få ledtrådar till hur den kontinuerliga autofokusen fungerar i en sådan. Två tekniker för kontinuerlig autofokus har utvecklats, en baserad på en ultraljudssensor och en som kombinerar denna sensor med bildbehandlig. En kamera, FLIR P660, och ultraljudssensorn, LV-MaxSonar-EZ1, anslöts till en PC varigenom kommunikationen skedde. Ett användargränssnitt togs fram i Matlab, vilket gjorde det möjligt att styra fokusmotorn i kameran och registrera avståndet från sensorn. All utveckling och styrning av teknikerna skedde via Matlab. Den första kontinuerliga autofokusen ställde fokuslinsen efter det avstånd som sensorn rapporterade, då linspositionen som funktion av avståndet var känt. Detta visade sig dock inte fungera särskilt bra då sensorn hade stora brister och hade problem att detektera objekt om inte ljudsignalen föll in på objektet i en rät vinkel. Loben blev dessutom väldigt bred vilket resulterade i att autofokusen kunde upptäcka och fokusera på objekt som låg precis utanför bilden. Utöver detta var räckvidden begränsad vilket ledde till att autofokusen inte kunde detektera objekt på längre avstånd. Den andra kontinuerliga autofokusen fungerade däremot bättre. Detta byggde på att sensorn endast användes som ett komplement till bildbehandlig, och gav en indikation om åt vilket håll fokus skulle kunna ligga. För att avgöra om systemet var fokuserat eller ej användes ett fokusmått som idag används i kameran för enkel autofokusering. Autofokusen visade sig kunna hitta korrekt fokus och kände av när det var dags att omfokusera, men hade i många fall svårt att finna åt vilket håll fokus låg. I några fall upplevdes autofokusen också som för känsligt för förändringar i bilden. I övrigt var det svårt att kunna avgöra hur pass bra den kontinuerliga autofokusen skulle kunna prestera i kameran då det nu led av en stor fördröjning i och med kommunikationen mellan kameran och Matlab. Olika fokusmått analyserades för att se om det inbyggda verkligen var det optimala. Det visade sig att fokusmåttet enligt Tenengrad presterade bättre med distinktare toppar och tydligare trender över åt vilket håll fokus låg. För vidareutveckling av den kontinuerliga autofokusen rekommenderades därför att byta fokusmått i kameran. Det rekommenderades också att byta sensorn mot en mer robust avståndsmätare, alternativt att slopa det helt och bara bygga autofokusen på bildbehandling.
This master’s Thesis included the development and implementation of a technique for continuous autofocus in an IR-camera. A study of different techniques for traditional cameras was carried out, in which way different techniques that also fitted an IR-camera came to light. A traditional video camera was obtained and analyzed in order to get some clues to how the continuous autofocus works in such a camera. Two techniques for continuous autofocusing were developed, one based on an ultrasonic rangefinder and one that combined the rangefinder with picture analysis. The camera, FLIR P660, and the rangefinder, LV-MaxSonar-EZ1, was connected to a PC in through which the communication took place. A user interface was designed in Matlab, which made it possible to control the focus motor and register the distance reported from the rangefinder. All development and control in this project was made through Matlab. The first technique positioned the focus lens by the distance reported from the rangefinder. This proved not to work very well since the rangefinder had some issues and problems in detecting objects if the signal didn’t fall on the object in a right angle. The lobe was also too wide which resulted in that the autofocus could register and focus on an object that was located just outside of the picture. Beside this the range was limited which meant that the autofocus couldn’t register and focus on an object at a greater distance. The other technique however worked better. This technique was based on that the rangefinder was used complementary to picture analysis, and gave an indication in which way focus could be located. To determine if the system was in focus or not a focus value was used, a focus value today used in the camera for single shot autofocus. It showed that this autofocus could locate focus and knew when it was time to refocus, but in many cases it had difficulties in knowing in which direction focus was located. In some cases the autofocus was thought of as to sensitive to changes and to keen to initiate a refocus. It was also hard to decide how well the autofocus would manage if implemented directly into the camera as it now suffered from a delay due to the communication between the camera and Matlab. Different focus values were analyzed in order to decide if the one used today really was the best one. It showed that the focus value according to Tenengrad performed better with higher accuracy and wider range. For further development it was there for recommended to change focus value in the camera. It was also recommended to change the rangefinder to a more accurate one, or discard it entirely in order to build the continuous autofocus on picture analysis alone.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

19

Kadeřábek, Jan. „Kamera v českém dokumentárním filmu“. Master's thesis, Akademie múzických umění v Praze. Filmová a televizní fakulta AMU. Knihovna, 2008. http://www.nusl.cz/ntk/nusl-78176.

Der volle Inhalt der Quelle

Annotation:

This work is noticing some basic factors, important in personal and craftsmenship encompassment of profession of a documentary cinematographer and it is also trying to map notable creators of Czech documentary and their colleagues - cinematographers since the birth of cinematography in Czech republic

APA, Harvard, Vancouver, ISO und andere Zitierweisen

20

Abrhám, Josef. „Kamera a projektor v nevědomí“. Master's thesis, Akademie múzických umění v Praze. Filmová a televizní fakulta AMU. Knihovna, 2008. http://www.nusl.cz/ntk/nusl-78177.

Der volle Inhalt der Quelle

Annotation:

Tato teoretická diplomová práce se zabývá audiovizualitou snů a převodem sdělení ze snových projekcí i archetypů kolektivního nevědomí do znakovosti filmu. Definuje snícího kinooka jako kameru i projektor ve vlastním nevědomí a uvádí úskalí v převodu jeho snových subjektivních znaků do obecně srozumitelného vyprávění. Zaměřuje se na specifika dětského diváka a jeho reflexi pohádek a propojení s dětským živým snem. Dále popisuje dvě metody samotného vědomého vstupu do snu. Metodu vědeckou ? používanou ve spánkových laboratořích k léčbě spánkových poruch a cestu o několik tisíc let starší, která je pro snivce, potažmo pro diváky vstupní branou, kdy dále ukazuje práci na vymezení obrazu z nevědomí a jejich písemné a obrazové zachycení. Uvádí významné filmové zpracování snů a myšlenky klíčových autorů, popisuje jejich celoživotní snahu o soustředěnou manipulaci s filmovým snem a dochází k závěru, že důležitá celková sdělení jsou ve filmech snících autorů skryta ve vícevrstvé struktuře a vyžadují předchozí snovou zkušenost nebo povědomí diváka. Snaží se vymezit pojem snové etiky a věnuje se společným znakům, které pro film vytváří střih a ve snu fungující nelogický dějový převaděč logických sekvencí a uvádí vztah časoprostoru ve filmu a ve snu projekčním i lucidním. Zdůrazňuje, že ve snu můžeme popisovat, nicméně to, co nás vede, abychom sny vnímali už popsat nemůžeme. Snění otevírá druhé světy, které se občas povedou převést i na plátno. Každá snová pozornost vstupuje do hry, když je přivolána a dostane nějaký cíl. Snová pozornost je spíš probuzením a probudit diváky je i cílem této práce.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

21

Macura, Jáchym. „Termální kamera pro biologické aplikace“. Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2020. http://www.nusl.cz/ntk/nusl-413014.

Der volle Inhalt der Quelle

Annotation:

Diplomová práce se zabývá návrhem termální kamery pro biologické aplikace. V první části je popsáné infračervené záření, také známé jako thermální záření. Pokračuje popisem emisivity objektů, která hraje důležitou roli při stanovení teploty snímaného objektu. Dále je v první kapitole uveden přehled typů termálních detektorů a jejich základní vlastnosti. Druhá kapitola stručně seznamuje se zákládními hardwarovými komponenty vyvíjené kamery. V poslední kapitole je popsán celý proces vývoje softwaru. Ten zahrnuje vývoj IP jader, kernel modulů a C++ knihoven.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

22

Rázek, Zdeněk. „Oční kamera: teorie a praxe“. Master's thesis, Vysoká škola ekonomická v Praze, 2008. http://www.nusl.cz/ntk/nusl-3206.

Der volle Inhalt der Quelle

Annotation:

Stopování zraku pomocí oční kamery umožňuje exaktně měřit směr pohledu testované osoby. Systém je složen ze dvou kamer, kdy jedna snímá oko respondenta, zatímco druhá zaznamenává jeho zorný úhel. Spojením obou signálů pak vzniká výstupní video, na kterém je vidět směr pohledu testované osoby a pohybující se červený bod znamenající místo ostrého vidění, tedy to místo, kam se respondent přesně dívá. Výhoda oční kamery spočívá v přesném zaznamenání pohybu zraku, kdy je na rozdíl od jiných technik kvalitativního výzkumu vyloučen subjektivní dojem testovaných osob. Právě proto nachází své uplatnění v marketingových výzkumech, stejně tak jako při návrhu designu webových stránek, reklamních sdělení či televizních spotů. Mezi druhou významnou skupinu využití oční kamery patří přímá a nepřímá interakce člověka s počítačem. V přímé interakci nahrazuje oční kamera vstupní zařízení počítače a usnadňuje tak jeho ovládání především tělesně postiženým lidem. Při nepřímé interakci slouží jako diagnostický nástroj díky níž počítač analyzuje místo fixace zraku a vyvolává tím nějakou další akci.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

23

Jurák, Petr. „Kamera pro aplikace v biologii“. Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2018. http://www.nusl.cz/ntk/nusl-316438.

Der volle Inhalt der Quelle

Annotation:

This diploma thesis is focused on the design of IP blocks for thermal camera. This termal camera is intended for plant research. The main part of the thermal camera is an infrared detector that detects a frequency in the range of 8 – 14 m. The analogue signal obtained is modified and subsequently digitized. The detector also includes a Peltier device which is designed for both detector cooling and heating, and is controlled by an external signal. The MicroZed development board implements IP blocks. The thermal camera is designed to be controlled from the MicroZed board. Device analysis is first described from the theoretical part to the design of IP blocks.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

24

Farhat, Kamal. „Ergols ioniques pour la propulsion spatiale : préparation, décomposition thermique et décomposition catalytique“. Poitiers, 2008. http://theses.edel.univ-poitiers.fr/theses/2008/Farhat-Kamal/2008-Farhat-Kamal-These.pdf.

Der volle Inhalt der Quelle

Annotation:

En raison de ses avantages attractifs (stabilité à long terme, développement de catalyseurs très performants), l’hydrazine est le monergol le plus utilisé pour la propulsion chimique liquide. Elle est utilisée dans de nombreux lanceurs ainsi que dans les propulseurs de contrôle et de maintien en orbite des satellites. En dépit de ses bonnes performances, l’utilisation de l’hydrazine comporte des risques majeurs concernant sa manipulation et l’environnement, générant un surcoût très important. Pour cela, une nouvelle classe de liquides ioniques énergétiques constituée d’oxydants, de réducteurs et d’eau a été étudiée. Le but de ce travail est de suivre la décomposition thermique et catalytique de quelques oxydants ioniques en solution aqueuse : HAN (nitrate d’hydroxylammonium, NH3OH+NO3-), AN (nitrate d’ammonium, NH4+NO3-), ADN (dinitramide d’ammonium, NH4+N(NO2)2-) et HNF (nitroformiate d’hydrazinium, N2H5+C(NO2)3-). Cette étude a été suivie par analyse thermique (ATD-ATG), en réacteur batch et en réacteur dynamique couplé à un spectromètre de masse. Les produits gazeux ont été analysés par spectrométrie de masse, alors que les produits condensés ont été analysés par spectroscopie Raman et titrés par réaction acide-base afin d’établir un bilan matière de la décomposition thermique et catalytique de ces ergols. Le catalyseur 10% Pt/Al2O3Si développé dans notre laboratoire pour la décomposition du mélange HAN-eau présente un faible effet catalytique à l’égard des mélanges ADN-eau, HNF-eau et AN-eau. Dans cette optique, d’autres types de catalyseurs mono- et bimétalliques à base de Pt, Fe, Cu ou Zn ont été préparés puis testés en décomposition de ces mélanges
Thanks to its attractive advantages, hydrazine is the most widely used monopropellant in chemical liquid propulsion. In spite of its good performance, the use of hydrazine involves major risks for handling and environment, inducing high costs. Therefore, a new class of energetic ionic liquids has been studied. They comprise an oxidizer, a reducer and water as solvent. The purpose of this work was to study the thermal and the catalytic decomposition of some ionic oxidizers in aqueous solution such as HAN (hydroxylammonium nitrate, NH3OH+NO3-), AN (ammonium nitrate, NH4+NO3-), ADN (ammonium dinitramide, NH4+N(NO2)2-) and HNF (hydrazinium nitroformate, N2H5+C(NO2)3-). The decomposition study was followed by thermal analysis (DTA-TGA), batch constant volume reactor and dynamic flow reactor coupled with mass spectrometer. The gaseous products were analysed by mass spectrometry, whereas the condensed products were analyzed by Raman spectroscopy and acid-base titration in order to establish a balanced equation of the thermal or catalytic decomposition of propellants. The catalyst 10% Pt/Al2O3Si developed in our laboratory for HAN-water decomposition presents a low catalytic activity toward ADN-water, HNF-water and AN-water mixtures. In this aim, other mono- and bimetallic catalysts based on Pt, Fe, Cu and Zn were prepared and tested to decompose these mixtures

APA, Harvard, Vancouver, ISO und andere Zitierweisen

25

Guha, Roy Shyamal Chandra. „Study of some aspects of the history of Kamta-Koch Bihar“. Thesis, University of North Bengal, 1985. http://hdl.handle.net/123456789/1233.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

26

Hogstad, Erik. „Synkronisering av robotmanipulator og virtuelt kamera“. Thesis, Norwegian University of Science and Technology, Department of Engineering Cybernetics, 2010. http://urn.kb.se/resolve?urn=urn:nbn:no:ntnu:diva-10588.

Der volle Inhalt der Quelle

Annotation:

Denne masteroppgaven tar utgangspunkt i Statoils robotlab for topside operasjoner som er under utvikling av SINTEF Anvendt Kybernetikk. Robotlaben består av to arbeidsroboter som kan utføre en rekke operasjoner på en ubemannet platform. Det er ønskelig å kunne benytte en av robotene i laben til å styre et autonomt kamera som viser et bilde av operasjonen den andre roboten utfører. Et autonomt kamera er ønskelig fordi det vil lette arbeidsoppgavene til operatøren som styrer arbeidsroboten og det vil kunne gi et bedre bilde enn om kameraet styres manuelt. Masteroppgaven beskriver først hvilke operasjoner som kan utføres i robotlaben, metoder for master/slave synkronisering av robotmanipulatorer og strategi for kamerastyring ut i fra hva som vises i kamerabildet. Deretter beskrives strategier for virtuell kamerastyring i spill og virtuelle filmmiljøer. En simulator for en arbeidsrobot og et virtuelt kamera er laget, og en strategi for autonom styring av et virtuelt kamera er implementert og testet i simulatoren. Et virtuelt kamera er valgt for å gjøre det mulig å teste strategier uten at man trenger å bekymre seg for begrensningene til en robotarm. Dette gjør den initielle utviklingen og implementasjonen enklere. Målet med simulatoren er å teste en av de beskrevne strategiene for styring av et autonomt virtuelt kamera. Implementasjonen ble gjort i C++ og simulatoren ble laget ved hjelp av et simuleringsbibliotek for stive legemer, og et 3D bibliotek for å vise visualisere simuleringen. Resultatene av simuleringen viser at det autonome virtuelle kameraet følger arbeidsroboten og holder arbeidsverktøyet til denne roboten innenfor kamerabildet under operasjonen.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

27

Šípek, Jan. „Tchaj-ťi čchüan a ruční kamera“. Master's thesis, Akademie múzických umění v Praze.Filmová a televizní fakulta. Knihovna, 2013. http://www.nusl.cz/ntk/nusl-172855.

Der volle Inhalt der Quelle

Annotation:

Chinese martial art t'ai chi ch'uan emphasizes the skills of stability of the body, smoothness of movement and especially of walk. This thesis asks a question, whether the techniques of t'ai chi are usable in handheld camera work. In the introductory essay part the author subjectively interprets the elements of both Chinese thinking and the art of t'ai chi, to the degree he had opportunity to explore. In a enquiry among Czech documentary cameramen he tries to find links with the oriental praxis, and, finally, in the last part, he introduces a set of practices of t'ai chi, usable for camera work.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

28

Barman, Rup Kumar. „From tribalism to independent state : reflection on the emergence of Kamate-koch Kingdom“. Thesis, University of North Bengal, 2005. http://hdl.handle.net/123456789/1214.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

29

গাঙ্গুলি, Ganguly কোয়েলা Koela. „অবরোধবাসিনীর মুক্তি-কামনা : প্রসঙ্গ আশাপূর্ণা দেবীর উপন্যাস Aborodhbashinir mukti-kamana: proshongo ashapurnadebir upanyash“. Thesis, University of North Bengal, 2018. http://hdl.handle.net/123456789/2724.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

30

Bekken, Kristian Saxrud. „Bevegelsesstyring av robotarm og kamera med kollisjonsunngåelse“. Thesis, Norwegian University of Science and Technology, Department of Engineering Cybernetics, 2010. http://urn.kb.se/resolve?urn=urn:nbn:no:ntnu:diva-10897.

Der volle Inhalt der Quelle

Annotation:

Denne rapporten beskriver videreutvikling av et system hvor en robotarmfjernstyres over nettverk, og som overfører stereoskopisk video i sanntid tiloperatøren. Gjennom en hodemontert fremvisningsenhet opplever operatørenderfor °a ha dybdesyn, samtidig som orienteringen til kameraenes motorisertefot styres av en orienteringssensor montert p°a hodesettet. Fem tidligereprosjekt- og masteroppgaver representerer det tidligere utviklingsarbeidetutført p°a systemet.Innenfor olje- og petroleumsindustrien foreg°ar det omfattende forskningsaktiviteti forbindelse med utvikling av ubemannede plattformkonsepter, hvordet skal være mulig °a fjernstyre disse plattformenes aktiviteter fra andreanlegg. Det er potensial for betydelige besparelser i driftskostnader sammenliknetmed ordinære plattformer ved °a benytte fjernstyrte roboter tilinspeksjons- og vedlikeholdsoppgaver.Oppgaven omfatter utviklingsarbeid innenfor tre hovedomr°ader. Først beskrivesutviklingen av en kollisjonsunng°aelsesrutine som er i stand til °a forhindresammenstøt mellom roboten og omgivelsene i sanntid p°a bakgrunn av datasamlet inn av en tidligere utviklet kartleggingsmodul. En kinematisk robotmodellbasert p°a sylindere er utviklet i denne sammenheng med fokus p°alav reaksjonstid for systemet. Deretter er implementasjonen av et nytt ogforbedret system for overføring av video beskrevet, mens siste del av arbeidetinkluderer utvikling og forbedring av systemets operatørgrensesnitt,brukervennlighet og overordnede utførelse.Det konkluderes med at utførte implementasjoner og modifikasjoner harhevet totalsystemets ytelse og funksjon ettersom kollisjonsunng°aelsesrutinenfungerer tilfredsstillende, videosystemet viser forbedring innenfor alle m°alteparametere, samt at operatørgrensesnittet n°a er mer omfattende og informativtenn tidligere.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

31

Meland, Espen. „Grensesnitt for IR-kamera i studentsatellitten NUTS“. Thesis, Norges teknisk-naturvitenskapelige universitet, Institutt for elektronikk og telekommunikasjon, 2013. http://urn.kb.se/resolve?urn=urn:nbn:no:ntnu:diva-23087.

Der volle Inhalt der Quelle

Annotation:

NTNU test satellitt planlegger å inkludere et IR camera som hovednyttelast, med formål å ta bilde av tyngdebølger i atmosfæren. Nyttelastmodulen i satellitten må utføre både bildebehandling og bildekomprimering for å oppnå bilder som både har god nok SNR, men samtidig er små nok til å kunne sende til en mottakerstajon på jorda i en fornuftig tid. Dette setter noen krav til nyttelastmodulen. I tillegg til å måtte hente bilder fra kameraet og lagre disse må den behandle bilder etterhvert som de kommer inn slik at man unngår å bruke mye lagringsplass og ressurser på å lagre bildeserier før de behandles.Flere kameragrensesnitt ble undersøkt og evaluert med tanke på bruk med FPGA eller mikrokontroller. Det ble funnet at Camera Link er det foretrukne grensesnittet når man bruker FPGA, mens direkte integrasjon var best når man bruker mikrokontroller.Nyttelastemodulen må også kunne ta ordre fra, og sende bildedata til, andre deler av satellitten. Det ble funnet at det holder å ha nyttelastmodulen som en I2C slave på bakplansbussen.FPGA og mikrokontroller ble sammenlignet i forhold til deres egnethet som prosesseringsenheten i nyttelastmodulen, og det ble funnet at FPGA generelt var mer egnet til denne typen oppgave.Det ble til slutt gjort et design av en eksempelimplementering, som og et FPGA design ble skrevet i verilog.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

32

Bremner, Sophie. „Transforming futures? : being Pentecostal in Kampala, Uganda“. Thesis, University of East Anglia, 2013. https://ueaeprints.uea.ac.uk/42348/.

Der volle Inhalt der Quelle

Annotation:

Pentecostal Christianity has gained many followers in the developing world, particularly in sub-Saharan Africa. Despite a corpus of anthropological scholarship on the impact of following Pentecostalism on identities and social change, less has been written from the perspective of the believer, and little from within the field of development studies. In this thesis, which is based on 14months of research in Kampala, Uganda, I explore how followers of this religion appropriate a discourse of prosperity and blessings, and how they utilise certain religious practices and relationships that are forged from the Pentecostal community in their efforts to mediate their futures and ‘move on up’ from a state of poverty. In particular, I discuss whether these practices and relationships can be seen as engendering transformative agency for these individuals. In doing so, I explore three themes that were prevalent in my data analysis: an everyday non-ecstatic speech act which is called ‘positive confessions’, ways of understanding poverty and dealing with situations of injustice, and patronage relationships between more wealthy and poorer members of the Pentecostal community. I suggest that despite readily apparent displays of agency, in effect these religious practices and relationships do little to enable positive transformations in the lives of these believers, and instead, might actually uphold existing issues of disenfranchisement, through an emphasis on the individual as a force for change, a reorientation in ideas of time, and a prohibition of doubt and questioning. In addition, a more limited exploration of a group of non-Pentecostals sheds light on the potential for Pentecostal Christianity to be influential on the wider religious milieu than may have originally be thought, and hints at the need for a re-fashioning of our research methods when understanding the lives of those who are ‘Pentecostal’, in Uganda at least.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

33

Špaňhel, Petr. „Automobilová on-board kamera se záznamem telemetrie“. Master's thesis, Vysoké učení technické v Brně. Fakulta informačních technologií, 2012. http://www.nusl.cz/ntk/nusl-236541.

Der volle Inhalt der Quelle

Annotation:

This master thesis deals with the design devices for automobile driving record with the information on telemetry. Camera placed in the vehicle captures the traffic before the accident, can facilitate the decisions about the offender. The basic element of the camera is DaVinci development kit has been developed for digital video applications. The aim of this thesis is to find ways to effectively implement basic algorithms for processing and evaluation of the scanned image using a single-chip microprocessor.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

34

Ssendi, Anna Nanjobe. „Abandoned New-Born Babies In Kampala-Uganda“. Thesis, Malmö högskola, Fakulteten för hälsa och samhälle (HS), 2012. http://urn.kb.se/resolve?urn=urn:nbn:se:mau:diva-25767.

Der volle Inhalt der Quelle

Annotation:

AbstractIntroduction: - An estimated number of 40 to 80 new-born babies are being abandoned by their mother in Kampala –Uganda annually. These children are usually dumped into dust bins, on streets, on hospital facilities, in bushes or in pit latrines. Aim:-The aim of this study was to investigate the goals of the organizations/institutions working with child abandonment in Kampala, to find out whom they collaborated with, to examine how the staff working with the organization/institution perceive the women who abandon and issue behind. Furthermore their personal incentives to continue to work with the problem, Method: A qualitative approach was used in this study and face to face semi-structured interview were conducted, since this was the best way to explore feelings, thoughts and attitudes of the respondents who gave answers to complicated questions. Research Questions: What are the main goals of the organizations/institutions and with whom do they collaborate with? What are their major hinders and needs? Do they see any progress? What are their perceptions of the mothers who abandon their new-born babies as well as the issues behind this cruel action? When did the staff became aware of this problem and what are the incentives driving them to continue do this work? Results: The results of the study were consistent with the research namely; the role of the organizations was reported being rescuing of the abandoned babies. First they are taken to the hospital during the first critical hours, thereafter are taken. to children court to get a permission to keep them in the children’s home; or find adoptive parent for these children who can give them love, care and education. Tracing mothers or family members was on the agenda, and in some case eventual re-unification was possible. The hinder which were met by the organization while doing their work were financial resources, misinformation about the organizations in the community, poor flow of information, lack of facilities to accommodate abandoned children, and poor collaboration with the government. Conclusion: The organizations/institutions are doing a good work, but procedures which are used at the moment are unfortunately not enough to reduce the problem. Therefore acute and new even radical approaches are needed to be put into consideration.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

35

Kamach, Oulaid Niel Eric Piétrac Laurent. „Approche multi-modèle pour les systèmes à événements discrets application à la gestion des modes de fonctionnement /“. Villeurbanne : Doc'INSA, 2005. http://docinsa.insa-lyon.fr/these/pont.php?id=kamach.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

36

Kamta, Jacob [Verfasser], und Reinhard [Akademischer Betreuer] Köhler. „Quantitative Untersuchungen im Französischen: Häufigkeitsverteilungen und funktionale Zusammenhänge / Jacob Kamta ; Betreuer: Reinhard Köhler“. Trier : Universität Trier, 2009. http://d-nb.info/1197805168/34.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

37

Morka, Kamila [Verfasser]. „Yeasts as Production Hosts for Biocatalysts / Kamila Morka“. Düsseldorf : Universitäts- und Landesbibliothek der Heinrich-Heine-Universität Düsseldorf, 2016. http://d-nb.info/1084873052/34.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

38

Blagov, Polina. „KAMERAÖGA : Hur subjektiv kamera påverkar berättandet i filmen“. Thesis, Umeå universitet, Institutionen för estetiska ämnen i lärarutbildningen, 2020. http://urn.kb.se/resolve?urn=urn:nbn:se:umu:diva-181609.

Der volle Inhalt der Quelle

Annotation:

The main goal of this study is to investigate how different camera angles affect the sentiment reflected by a film. I also aim to demonstrate how a subjective camera can be used as a method for narrating a film. In combination with this, I also specifically analyze how the camera angles reflect the power relations between characters in the film and how it affects the emotional expression as well as the film language. This project relies on several original videos that I have created using mobile phone, and I test the subjective camera as well as different angles to demonstrate my ideas. Through this work I aim to enhance our general understanding of visual expression created by a subjective camera and how the use of new technology in the era of an ongoing societal change will drive the future of films, their expression and influence on the viewers and general society.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

39

Calas, Bernard. „Kampala (1880-1993) : histoire, société et espaces urbains“. Paris 10, 1994. http://www.theses.fr/1994PA100007.

Der volle Inhalt der Quelle

Annotation:

Partant du constat de l'importance de la construction de l'état sur l'évolution des espaces et des sociétés africaines et de la spécificité ougandaise des modalités de cette histoire, l'auteur analyse, dans un premier temps, les impacts de cette histoire sur Kampala. Les pratiques politiques précoloniales ont détermine la constitution d'une agglomération sur le site de l'actuelle capitale ougandaise. Cette ville africaine a capte l'attention des colonisateurs qui, a cote d'elle, ont construit une ville d'inspiration européenne aboutissant à un paysage duel. Le déclin postcolonial a provoqué une décomposition sociale et la généralisation de l'économie de type "magendo". La "taudification" du centre et l'extension du bâti précaire en sont les conséquences spatiales. Apres l'analyse de la ville à l'échelle globale, l'auteur s'attache, dans un second temps, a l'étude des différenciations internes, des processus de production de l'espace et de structuration de la ville par les habitants. En conclusion, il s'attache à dégager le poids de la violence sur la ville et à produire un modelé de fonctionnement urbain africain
The political history of Uganda has had a great impact on the urban landscape of Kampala. The existence on the present site of Kampala of a capital of an African kingdom explains that the British settled themselves beside and explains the dual landscape of the town. Spatially the consequences were "slumification" of the city and grauth of the shaky periphery. But the urban growth went on in spite of the crisis. In a second time, the author analyses the town at a bigger scale. The differentiations of the urban villages are produced by the townsmen through their strategies to settle and work in town

APA, Harvard, Vancouver, ISO und andere Zitierweisen

40

Asiimwe, Florence Akiiki. „Gender dynamics in home ownership in Kampala, Uganda“. Doctoral thesis, University of Cape Town, 2008. http://hdl.handle.net/11427/3886.

Der volle Inhalt der Quelle

Annotation:

Includes abstract.
Includes bibliographical references (leaves 318-329).
This study explores the different ways in which married women in Kampala, Uganda are unable to become homeowners during marriage and at widowhood. In the process, the study also explores the special mechanisms through which married women became homeowners through marriage and at widowhood. The study was premised on the assumption that gender inequality in homeownership exists and persists in Uganda in spite of urbanization, increase in information flow, education and income of women. Although married women live in a home with their husband, they do not actually own the home. As a result, women tend to be users rather than owners. Although one would expect statutory law to guarantee married women home ownership rights during marriage, this is not the case. While Uganda’s state policy states that every citizen has the right to own property, in particular houses, there is no legal framework that guarantees married women equal ownership rights of the home. The current Marriage and Divorce Acts are not clear on the benefits of the married woman in the matrimonial home during marriage and divorce. At divorce the married woman’s benefits in the matrimonial home is at the discretion of the judge who determines the percentage of a married woman’s entitlement to the matrimonial home upon proof of evidence the married woman presents. The Domestic Relations Bill that would address the unequal gender relations in homeownership and probably guarantee married women benefits in the matrimonial home has never been passed. Though a number of NGOs and civil society organizations have lobbied Parliament to pass the Domestic Relations Bill, no progress has been made. Similarly, while one would expect a widow to automatically inherit the matrimonial home upon the death of her husband, intestate law of succession guarantees the widow only user rights of the home until she dies or remarries. The matrimonial home belongs to the eldest son of the diseased. Although the Constitutional Court recently declared some of the clauses in intestate succession law unconstitutional, Parliament is yet to come up with a new succession law. The research applied Hirdman’s gender system and contract theory to explain the complex gender dynamics in homeownership. The study explores the relationship between married women and their husbands and unmarried women and married male adulterers. The analysis of married women dynamics highlights the different gender contracts that exist between married and unmarried women. Two suburban middleincome areas, namely Banda and Kiwatule were chosen from which urban women were identified and interviewed about the challenges they face to become homeowners in their own right. The study was based on purely a qualitative design. The data were collected through life stories of unmarried women, married couples, and widows. The study reveals that while married men adulterers are not concerned to have their names included on the title deeds of their female lovers’ homes, ironically married men ensure that the matrimonial home is solely registered in their names regardless of whether or not their wives contribute to the construction costs. Married women were unable to become homeowners due to lack of regular income, lack of awareness, and patriarchal male cultural beliefs. The study reveals that it is only under special circumstances that married women are able to become homeowners an indication of male dominancy in home ownership. In some cases married women are able to become homeowners when a husband is absent at the time of purchase and registration of the plot of land on which the matrimonial home is built. In other cases married women become homeowners when their husbands need their income as a contribution to the home project or when they are in a financial crisis. Married women with nothing to contribute to the home project find it difficult to negotiate for homeownership rights. Divorce and separation case laws show that married women whose names do not appear on the title deed are at the mercy of the Court for beneficial rights in the home. However, in cases where the married woman moves out and leaves behind the husband in the home, it becomes difficult to evict him even when the court rules in her favour.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

41

Young, Graeme William. „Informal vending and the state in Kampala, Uganda“. Thesis, University of Cambridge, 2018. https://www.repository.cam.ac.uk/handle/1810/274999.

Der volle Inhalt der Quelle

Annotation:

This thesis examines how the agency of informal vendors in Kampala, Uganda, is shaped by the state. It argues that efforts by the President and the NRM to monopolize political power have dramatically restricted the agency of informal street and market vendors, forcing them to adapt to changing political circumstances in ways that have limited their ability to participate in urban development and economic life. This argument is presented through two examples of how expanding political control has led to a contraction of vendors’ agency. The first of these describes how the early decentralization and democratization reforms introduced by the NRM allowed street vendors to take advantage of competition between newly elected and empowered politicians to remain on the city’s streets, and how the central government’s subsequent recentralization and de-democratization of political power in Kampala has led to the repression of street vending while closing the channels of influence that vendors previously enjoyed. The second explores how efforts by the central government to undermine the opposition-led local government allowed market vendors to successfully oppose an unpopular market privatization initiative, and how both the President and the new city government have since been able to take advantage of disputes within markets for their own purposes while vendors have been largely unable to realize their market management and development ambitions. Both examples detail the causes, forms and implications of the ruling party’s monopolization of political power and explore how vendors have responded to their changing political circumstances, highlighting how these efforts face significant obstacles due to the increasingly restrictive environment in which vendors are forced to act. This thesis shows that the agency of informal vendors—while always manifest in certain ways—is constantly and increasingly constrained as the President and the ruling party tighten their grip on power. As their political exclusion precipitates a broader exclusion from urban development and economic life, informal vendors are forced to contend with a situation of increasing marginalization and vulnerability that they are largely unable to improve.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

42

Gorisse, Marie-Hélène. „L'art du point de vue : étude dialogique du pluralisme Jaïn dans le Prameya-kamala-martanda“. Lille 3, 2011. http://www.theses.fr/2011LIL30030.

Der volle Inhalt der Quelle

Annotation:

Développée dans la perspective des discussions contemporaines en philosophie de la logique, cette thèse est un travail sur la notion de contexte dans les théories jaïnes médiévales de la connaissance et l'argumentation. Le corpus sélectionné est le dernier chapitre du Prameya-Kamala-Martanda, le soleil qui fait fleurir le lotus que sont les connaissables, que Prabhâcandra a rédigé à la fin du dixième siècle de l'ère chrétienne. Cette thèse fournit une édition, ainsi que la première traduction française de ce passage. Ce chapitre a été sélectionné car son enjeu est de présenter trois approches de la notion de contexte. La première approche est celle de la théorie des points de vue, selon laquelle il est possible d'avoir une connaissance partielle, c'est-à-dire une connaissance qui dépend d'un contexte théorique donné et par conséquent n'exprime qu'une sous-partie ses aspects d'un connaissable donné. La seconde approche est celle de la théorie des modes d'assertion, qui permet d'expliciter les paramètres implicitement présents dans toute assertion. Et la troisième approche est celle de la théorie des inférences cryptées, qui est une méthode de présentation des énoncés d'inférence telle que comprendre un énoncé nécessite un travail sur sa forme linguistique qui va révéler un éventail de significations plus profondes
This dissertation investigates the notion of context in Mediaeval Jain theory of knowledge, within the perspective of contemporary discussions in the field of philosophy of logic. The selected corpus in the last chapter of the PrameyaKamalaMartanda, The sun that grows the lotus of the knowables, written by the end of the tenth century of Christian area by Prabhâcandra. This chapter has not been translated in a European language yet, and our work contains a edition as well as French translation of it. The aim of the translated chapter is to present three approaches dealing with the notion of context. Among them, the first is referred as the "theory of standpoint", according to which one might acquire partial knowledge, that is to say knowledge dependent on a theoretical context and hence express but a subset of the numerous aspects of a given object of knowledge. The second approach is the theory of the modes of assertion, which enables one to make explicit the parameters implicitly present in every assertion. And the third approach is the theory of "cryptic inferences", which is a method to present inferential statements in a hidden way. From this, the comprehension of the meaning of an inferential statement calls for a work on its linguistic for, which reveals a range of deeper meanings. The aim of this presentation is to provide with an understanding in contemporary terms of the notion of context in Jainism. We chose to develop this reading within the frame of Dialogical logic, since this logical frame enables one to handlea pluralitu of sets of norms

APA, Harvard, Vancouver, ISO und andere Zitierweisen

43

Bhattacharya, Amit. „The Poetics of resistance: a study of marginal voices in the poetry of Kamala Das“. Thesis, University of North Bengal, 2007. http://hdl.handle.net/123456789/1172.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

44

Kyagulanyi, Ronald. „Risk and portfolio management in microfinace institutional governance in Kampala metropolitan region“. Thesis, Nelson Mandela Metropolitan University, 2016. http://hdl.handle.net/10948/8532.

Der volle Inhalt der Quelle

Annotation:

This study was undertaken to examine the issues relating to risk and loan portfolio management in Microfinance institutions in Uganda. The first objective of this study was to establish the extent of governance in MFIs in Kampala, by looking at the overall management of these institutions, assessing how decision are made, and looking at how they are staffed. The second objective is to establish the variables that best explain management of Micro-Finance Institutions (MFIs). The third objective is to identify the risk management of loan portfolios and lastly to provide recommendations based on the findings. The researcher used explanatory and survey research designs. A minimum sample 114 participants from 50 MFIs was used in data collection and analysis. The researcher employed principle component analysis (PCA) basing on Eigen values to identify variables above mean-scores and the nodes on the scree plot (ordered eigenvalues) denotes the number of variables that best explain the dimensions and conclusion on each variables was drawn basing on mean values of descriptive statistical analysis. Furthermore the orthonormal loadings display of the variables is employed basing on the first principle component that identified the names of variables above the mean score and final variable is drown basing on descriptive statistical analysis using mean scores focusing on those above the mean. The analysis is based on three dimensions of assessments, namely; Governance, Human capital and Risk Management. In general 227 variables were observed from the 3 dimensions, however by employing the PCA the researcher was in position to come up with those that best explain the 3 dimensions and in summary 29 out of 131 variables were identified by the PCA that best describes governance, 17 out of 72 variables were extracted that best explain what is taking in place in human capital whilst 5 out of 24 variables were extracted in relation to risk management. Furthermore conclusions are drawn by employing descriptive statistical analysis basing on mean scores of the variables identified by the PCA. Therefore out of the 29 variables identified by PCA on governance dimension, 19 variables on average have mean scores above 3 signifying good performance in those areas. Therefore the strength of MFIs under governance is seen in the following areas; The MFIs surveyed have strong board that is professionally ethical and knowledgeable in the area of managing financial institutions. They are performing better in the area of decision making, they do make timely decisions, and the board keeps on monitoring management and making sure that strategies agreed upon are properly implemented. The board is well committed in filing tax returns which is a legal requirement to all taxpaying institutions. However 10 variables showed sign of weakness because they have mean scores on average below 3. Management of MFIs need to strengthen its self in the area of allowing individual initiative in decision making, recognition of management committees in place, this smoothen the operations of the institution and lastly the board need to mentor the management, most of the personnel managing these institutions lack skills in managing the entity. On the side of human capital management, 17 variables identified by PCA, basing on their mean scores, 13 have mean scores above 3 showing good performance of MFIs. In this case the strength of MFIs lies in having educated human resources in place; MFIs gave the ability to exploit the available opportunities more especially targeting low income earners that for long have been neglected. However mores is needed under human capital dimension more especially in those areas where on average their mean scores was below 3 such as training programs where the respondents revealed that the type of training obtained does not match with the job requirements therefore they do not benefit from these programs. There is still a lot of bureaucracy within the management that slows the operations of the MFIs. This is further explained by having directors commuting as loan officers. Failure to accept risk exposes the entire institution to a vague of collapse. The last dimension is risk management and in this way, 5 variables were identified by the PCA, and basing on their mean scores, 3 variables showed good progress and that is having performance management system in place, there are limited complaints from the clients about the MFIs services offered and lastly all employees are given access rights to organisation resources, the loan schemes are open to all employees and no discrimination in service delivery, however 2 variables were identified with mean scores below 3 showing weaknesses within the systems. Therefore MFIs have to improve technologies used in their operations; the use of file carbines, off line computers exposes the institution to high degree of risk. There is need to strengthen their distribution channels so that the financial services offered reach out to clients at ease. Specifically the research study identified various risks like systematic risk, operational risk, credit risk, counterparty risk and legal risk in that they do affect the gross loan portfolio in MFIs and policy measures have been recommended to mitigate such risks in financial institutions. These risks can be mitigated by; • Having Internal control systems of checks and balances • Hedging of transactions through advance booking and paying cash in advance. • Diversification of portfolio, through investing in as many assets possible • Continuous reminder of their obligations and making a fall up of clients and as well insuring the loans. • Investors are encouraged to form a network of partners in the business • Continuous engagement of a legal adviser to the institutions. The study contributed to better understanding of risk management in MFIs, that no single variable can be relied upon to explain effective management of risks but however in this study three dimensions play a crucial role in management of risks. The MFI management should focus on having an internal audit function operating independently in that financial controls should be regularly updated to cope with the changing environment. Audit committee of the board should be complete enough to supervise and regulate internal control systems, written policies in the organization should be effectively implemented with clear division of responsibilities of middle to top managers and lastly Segregation of powers and authority need to be strongly emphasized as a way of enhancing proper management of risks in MFIs.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

45

Mansour, Nabeel [Verfasser], Stephan [Akademischer Betreuer] Nekolla, Michael [Gutachter] Joner und Stephan [Gutachter] Nekolla. „Vergleich einer konventionellen SPECT-Kamera mit einer CZT-Kamera bei der Myokardperfusionsszintigraphie / Nabeel Mansour ; Gutachter: Michael Joner, Stephan Nekolla ; Betreuer: Stephan Nekolla“. München : Universitätsbibliothek der TU München, 2021. http://d-nb.info/1238781675/34.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

46

Karlsson, Lars, und Andreas Köhler. „Dimensionering av bladförband på Kamewa CPP (Controllable Pitch Propeller)“. Thesis, Karlstad University, Karlstad University, Karlstad University, Division for Engineering Sciences, Physics and Mathematics, 2008. http://urn.kb.se/resolve?urn=urn:nbn:se:kau:diva-3332.

Der volle Inhalt der Quelle

Annotation:

The thesis project is accomplished during winter and spring 2008 at Karlstad University at the faculty of technology and science. The tutor at Karlstad University is Nils Hallbäck and the examiner is Hans Johansson. Rolls-Royce at Kristinehamn in Sweden is the initiator for the project. The thesis project title is design of the blade bolt joint on Kamewa CPP. CPP stands for controllable pitch propeller. The study include two main aspects which are to analyze if the blade bolt joint which is used today can be applied on a larger propeller and if there are better solutions or other possibilities to join the blade to the hub. First the classification rules of some institutes were studied to find out which limitations there are. Bolted joint has to exceed a minimum bending strength and the bolts have to be made out of steel and their strength has to be at least 10.9. Today Rolls-Royce use ten bolts per propeller, five on each side of the blade. To analyze the strength of the blade bolt joint connection a FEM and an analytic analyze were made and the results compared with each other. Two cases were examined, one for drift and two when hitting an iceberg. The results were similar to each other for FEM and the analytic analyze. At drift all bolts were under the tensile strength of 750 MPa but when using ice loads some bolts started to deform. A new concept for the bolt connection was tested. Again the stress in the bolts stayed under the tensile strength at drift but deformed when applying ice loads. A difference between analytical and FEM analysis was that the stress difference between the bolts were minor in the FEM method. Another concept was only studied with FEM and it had a geometric locking devise combined with the same blade bolt connection as Rolls-Royce use today. At drift the locking devise didn’t support the connection much but when applying ice loads less bolts started to deform and less material in the bolts reached the tensile limit. All three concepts showed stress concentrations at the first two or three threads. The differences between the three concepts weren’t that large and to get better results other possibilities have to be considered. It is important to know how much torque has to be applied on the screw to get the right amount of pretension. Three aspects to consider are to apply the torque without getting any torsion in the screw, to lower the moment with the right coating or lubricant and to avoid the stress concentrations at the threads. Superbolts and clampnuts are two possibilities to avoid torsion in the screws. By using screw thread inserts or tension optimized threads the stress in the thread gets optimized and a coating or lubricant with a low friction coefficient will lower the torque. Three possible solutions are suggested.

Examensarbetet har utförts på fakulteten för teknik och naturvetenskap under vintern och våren 2008 och är en kurs på 22,5 hp med kurskoden MSGC 17. Handledare på Karlstads universitet är Nils Hallbäck och examinator är Hans Johansson. Rolls-Royce i Kristinehamn är uppdragsgivaren till examensarbetet. Uppgiften är att dimensionera ett bladförband till en stor Kamewa Ulstein CP-propeller. Frågeställningen som ska besvaras är om det går att använda dagens förband och undersöka om det finns bättre alternativ eller andra lösningar på problemet. Det finns inga ritningar på den storleken av propellrar som förbandet ska göras till. Därför måste man skala upp mått från mindre propellrar. Propellerdiameter är 7,7 meter och bladet med fot väger 10 ton efter skalningen. Förbandet ska klara av DNVs (Det Norske Veritas) klassificeringskrav för böjmotstånd och förbandet dimensioneras därefter. För dagens förband behövs det mycket stora skruvar för att klara klassificeringskravet. En analytisk och en FEM-analys genomfördes för att det inte finns något material att jämföra med. Krafter som måste betraktas är centrifugalkraften, tyngdkraften, framdrivningskraften från vattnet samt en isbelastning vid kollision med ett isberg. Framdrivningskraften varierar med 20 % när propellern passerar skrovet. Resultaten från analyserna gav att dagens förband klarar belastningarna vid drift, dock att bultarna börjar deformeras vid belastning med iskraften. I den analytiska analysen antar man att alla delar (bladfot, fläns och nav) är stela och inte deformeras. Dessutom tar man inte hänsyn till böjpåkänningarna som uppstår i skruvarna. Detta tas med i FEM-analysen samt att man räknar med olinjära materialsamband. Därför uppstår det stora spänningsskillnader, upp till 210 MPa, i bultarna vid FEM-analysen vilket inte sker vid de analytiska beräkningarna. Ett antal koncept genererades och två av dessa analyserades närmare. Båda koncepten är optimerade för centrifugalkraften eftersom den utgör den största belastningen under drift om man bortser ifrån förspänningen. Koncept 1 är ett förband som består av 16 bultar per propeller med tre olika storlekar. Enligt FEM analysen fås en jämnare spänningsfördelning över skruvarna än med dagens förband, medan den analytiska metoden ger ungefär samma fördelning som vid dagens förband. Alla skruvar håller sig under sträckgränsen vid drift. Vid isbelastningen uppnås sträckgränsen i många av de mindre skruvarna och skruvarna börjar deformeras plastiskt. I detta avseende stämmer den analytiska lösningen och FEM-analysen överens. Skillnaden är att den analytiska beräkningen visar större spänningsvariation bland skruvarna dvs. att den största och minsta spänningen hos bultarna är högre än vid FEM-beräkningarna. Det andra konceptet som analyserades närmare består av en formlåsning som sitter under bladet tillsammans med samma skruvar som används vid dagens förband. Vid drift märks knappt någon skillnad. Vid isbelastningen så tar formlåsningen dock upp mer spänning och avlastar skruvarna. Färre skruvar deformeras plastiskt. Det finns möjligheter att använda sig av redan befintliga lösningar som Superbolts, clampnuts och andra verktyg. Det som är avgörande för förbandets funktion är ett korrekt åtdragningsmoment. Positivt är att samtidigt kunna förspänna skruvarna utan torsion. En lösning är att ytbehandla skruvarna med en beläggning med känd friktionskoefficient.

Tre lösningsförslag har tagits fram som ger ett bättre resultat än dagens förband.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

47

Wiman, Johan, und Anisa Dzindo. „Tystnad Tagning Kamera : En studie om yrkesroller i filmbranschen“. Thesis, Linköpings universitet, Kultur, samhälle, mediegestaltning, 2011. http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-69539.

Der volle Inhalt der Quelle

Annotation:

Denna studie grundas i tankar kring vilka individer som ligger bakom en filmproduktion. Dådet i en filmproduktion arbetar en stor skara människor blev det intressant att undersöka ochlyfta fram diskussion om hur dessa samverkar för att slutföra en produkt som baseras på envision. Studien visar också på vad som ligger bakom samverkan och hur den hierarkiskastrukturen påverkar filmarbetarnas yrkesroll. En observation har gjorts på enlångfilmsinspelning. För att fördjupa observationen har även två intervjuer gjorts medfilmarbetare. Användningen av både intervjuer och observation har gett en större inblick ifilmarbetarnas vardag.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

48

Sendi, Richard Senteza. „Ethnicity and residential location in Kampala-Mengo (1890-1968)“. Thesis, University of Edinburgh, 1987. http://hdl.handle.net/1842/24306.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

49

Leo, Stefan. „Designkoncept av ”toycam” : Framtagning av koncept för analog kamera“. Thesis, Högskolan på Gotland, Institutionen för humaniora och samhällsvetenskap, 2011. http://urn.kb.se/resolve?urn=urn:nbn:se:hgo:diva-930.

Der volle Inhalt der Quelle

Annotation:

Analogue photography is something that many thought died out in the beginning of the 21’st century as a result of the digital revolution. But that’s not the case. As the digital revolution swept over the world a movement of analogue cameras, and so called toycams grew bigger. A toycam was a low quality, plastic, analogue camera, made to be manufactured and sold as cheaply as possible without any considerations of quality. Pictures produced by the camera are often soft focused with intense color changes and contrasts. Every once in a while an orange yellowish field will show up on the photos. This is caused by light leaks caused by the poor quality of the construction of the camera. While these qualities may be considered flaws they’re actually much of the reason to why people use and like toy cameras. During the last ten years new production of old toycam models and completely new analogue cameras has been picked up. Every year a handful of new cameras enter the market and the interest and movement around toycams just seems to grow the further in to the digital era we get. But despite this, I as a dedicated toycam enthusiast, don’t sense that any real development is happening in the area. The movement is at a standstill. The objective of the project has been to look for and develop something new, a new function that adds something to the market and movement. This has been done with the design process. The market has been studied and different concepts of form and functions have been developed. Users have been involved during the whole process, including during the final selection of concept. The result is a contemporary camera with discrete inspiration from cameras of the 50s’. But the main thing with the camera is a for compact- and toy cameras whole new feature – exchangeable film cartridges! Film can now be changed, in the middle of a roll in just a few seconds. Perfect when one wants to change film type or just don’t have the time to reload the camera! Flexibility!

APA, Harvard, Vancouver, ISO und andere Zitierweisen

50

Fautz, Michael [Verfasser]. „Objekt- und Texturrekonstruktion mit einer robotergeführten Kamera / Michael Fautz“. Aachen : Shaker, 2003. http://d-nb.info/1179023498/34.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

Dissertationen zum Thema „Kamata“

Geben Sie eine Quelle nach APA, MLA, Chicago, Harvard und anderen Zitierweisen an