Dissertationen zum Thema „Head Radiography“

Orientador: Vânia Célia Vieira de Siqueira
Dissertação (mestrado) - Universidade Estadual de Campinas, Faculdade de Odontologia de Piracicaba
Made available in DSpace on 2018-08-17T06:12:45Z (GMT). No. of bitstreams: 1 Negreiros_PauloEduardo_M.pdf: 4232544 bytes, checksum: e8434e2474207fec3d2143a9d7c9541f (MD5) Previous issue date: 2000
Resumo: Em 1884, os craniologistas adotaram o plano horizontal de Frankfurt, determinado pelos pontos Pório esquerdo, Pório direito e pelo ponto Infra-orbitário esquerdo, como sendo a referência que define a posição da cabeça enquanto paralela ao solo. Quando do surgimento da cefalometria, adotaram-se inúmeros pontos, linhas e planos de referência utilizados em craniometria, dentre os quais o plano horizontal de Frankfurt, porém somente com o desenvolvimento do cefalostato, em 1931, a validade do emprego dessas referências passou a ser questionada devido à dificuldade de localização dos pontos Pório e do Orbitário e à grande variabilidade interindividual de inclinação desse plano o que gera interpretações duvidosas nas análises cefalométricas nele baseadas. Dessa maneira a Posição Natural da Cabeça (PNC) associada a uma linha de referência extracraniana tornou-se objeto de interesse tanto para a antropologia quanto para a ortodontia por ser um posicionamento estável para as avaliações da estética facial, para o diagnóstico e para o estudo longitudinal do crescimento craniofacial. Este trabalho objetivou estudar as alterações das grandezas cefalométricas angulares e lineares mais comumente utilizadas em cefalometria, quando a posição natural da cabeça (PNC) é modificada durante a tomada da telerradiografia, sua influência no diagnóstico ortodôntico e a confiabilidade e reprodutibilidade da PNC em tomadas radiográficas sucessivas. Analisou-se 180 telerradiografias tomadas em norma lateral de 30 pacientes do sexo feminino com idade média de 21,3 anos obtidas em duas séries de tomadas radiográficas com intervalo de 15 dias entre as séries. Registrou-se em cada série, a posição natural da cabeça (PNC), a PNC acrescida de 5 graus (PNC+5°) e a PNC com flexão de 5 graus (PNC-5°) de cada paciente. Os resultados obtidos demonstraram que as grandezas lineares S-N, ENA-ENP, CO-Gn, Go-Gn, e as grandezas angulares SNA, ANB, PP.GoGn, l.PP, IMPA, 1.1, SN.VER e HF.VER não apresentaram alterações estatisticamente significantes entre as posições estudadas e entre as séries de tomadas radiográficas. As grandezas angulares SNB, SN.GoGn, FMA, SN.PP, Ângulo Z e a grandeza linear Co-Go apresentaram alterações estatisticamente significantes tanto entre as posições quanto entre séries de tomadas radiográficas, porém sem significância do ponto de vista clínico. Concluiu-se que as medidas angulares e lineares avaliadas não apresentaram alterações significantes quando a posição natural da cabeça modificou-se dentro da faixa de variação angular estudada, o que não conduziu a diagnósticos ou interpretações duvidosas. Devido a baixa variação das angulações dos ângulos SN.VER e HF.VER demonstrou-se que a metodologia empregada com a utilização da Unidade Orientadora de Posicionamento, apresentada neste trabalho, permite a reprodutibilidade da posição natural da cabeça com grande confiabilidade dentro de uma faixa de variação da PNC em ± 5°.
Abstract: Em 1884, craniologists adopted the Frankfurt horizontal plane, determined by the left Porion, right Porion and left Orbitale points, as being the reference that defines the head position while parallel to the soil. When of the appearance of the cephalometry, countless points, lines and reference planes were used in craniometry, among them the Frankfurt horizontal plane. However, only with the development of the cephalostat, in 1931, the validity of the employment of those references became questioned due to the difficulty of location of the Porion and Orbitale points and to the great variability of individual inclination of that plane which lead to doubtful interpretations when used for cephalometric analyses. Therefore, the Natural Head Position (NHP) associated with an extracranial reference line became object of so much interest for the anthropology as for the orthodontics due to a stable positioning for the evaluations of the facial aesthetics, diagnosis and for the longitudinal study of the craniofacial growth. This work aimed to study the alterations of angular and linear cephalometrics measurements more commonly used in cephalometry, when the natural head position (NHP) is modified during the taking of cephalometric radiography, its intluence in the orthodontic diagnosis, and the reliability and reproducibility of NHP for successive radiographs. One hundred and eighty cephalometrics radiographs were taken in lateral norm of 30 female patients with age range of 21,3 years old. The X-ray were obtained in two series within 15 days interval among them. In each of the series, the natural head position (NHP), the NHP added of 5 degrees (NHP+5°) and NHP with 5 degrees of flexion (NHP-5°) were registered from each patient. The obtained results demonstrated that the linear measurements S-N, ENA-ENP, CO-Gn, Go-Gn, and the angular measurements SNA, ANB, PP. GoGn, I.PP, IMP A, 1.1, SN. VER and HF. VER did not present statistically significant alterations among the studied positions and the two series of radiographic taken as well. The angular measurements of SNB, SN.GoGn, FMA, SN.PP, Z Angle and the linear measurements Co-Go presented statistically significant alterations even between the positions themselves as in the two series of radiographs taken, however, without significance on the clinical point of view. It was concluded that the angular and linear measurements appraised did not present significant alterations when the natural head position modified within of the angular variation strip studied, which did not lead to doubtful diagnosis or interpretations. Due to low variation of the angulations of the SN.VER and HF.VER angles, it was demonstrated that the methodology used with the employment of the Guiding Unit of Positioning presented in this work, allows the reproducibility of the natural head position with great reliability within at 5° variation strip of NHP.
Mestrado
Mestre em Ortodontia

L'analyse morpho-fonctionnelle précise de l'épaule, notamment au niveau de l'articulation glénohumérale (GH), permettrait d'améliorer notre compréhension des dysfonctions de l'épaule associées aux ruptures de la coiffe des rotateurs. Cependant, des difficultés techniques compliquent l'analyse de la morphologie et du mouvement de l'épaule dans un contexte clinique. Dans le cadre de la présente thèse, une méthode d'analyse 3D des translations GH basée sur l'acquisition de séquences de radiographies biplanes sous EOS™ a été développée. Une étude pilote sur 10 sujets sains a d'abord permis de vérifier la facilité d'application d'un protocole d'acquisition des images et d'évaluer la répétabilité de l'identification des repères anatomiques de l'épaule sur les radiographies. La méthode proposée en dernier lieu permet, suite à l'acquisition de radiographies, de reconstruire un modèle personnalisé morpho-réaliste de la scapula et un modèle simplifié de l'humérus. Ces modèles sont ensuite recalés interactivement sur les images acquises à différentes positions du bras et utilisés pour décrire les translations GH à ces positions. La méthode a été validée en termes de précision et de répétabilité sur des images acquises d'épaules cadavériques et de patients ayant des ruptures de la coiffe des rotateurs. La dernière partie du travail présenté ici consiste à appliquer la méthode développée à 30 sujets (25 patients et 5 sujets sains) pour lesquels l'état de la coiffe des rotateurs et la fonction de l'épaule ont été évalués, puis à étudier les corrélations entre les translations GH et la fonction de l'épaule
Precise morpho-functional analysis of the shoulder, including of the glenohumeral (GH) joint, would allow improving our understanding of shoulder dysfunction associated to rotator cuff tears. However, technical difficulties make analysis of shoulder morphology and motion difficult in a clinical setting. The work carried out during this thesis allowed developing a method for 3D analysis of GH translations relying on the acquisition of sequences of biplanar radiographs with the EOS™ system. A pilot study carried out on 10 healthy subjects allowed verifying the ease of application of an image acquisition protocol and evaluating the repeatability of shoulder landmark identification on the radiographs. The final proposed method allows, following the acquisition of radiographs, obtaining a personalized morphologically realistic reconstruction of the scapula and a simplified model of the humerus. These models are then interactively registered to the images acquired at different arm positions and used to describe GH translations for these positions. The proposed method was validated in terms of precision and repeatability on images acquired of cadaveric shoulders and of patients with rotator cuff tears. The last part of the work presented here consists in applying the developed method to 30 subjects (25 patients and 5 asymptomatic subjects) for whom rotator cuff condition and shoulder function were assessed, and to study correlations between GH translations and shoulder function

Thesis submitted in fulfilment of the requirements for the degree Master of Technology: Diagnostic Radiography, Department of Nursing and Radiography in the Faculty of Health Wellness Sciences at Cape Peninsula University of Technology 2014
Aim: The aim of this study was to record the values of CTDIw and DLP displayed on the Computed Tomography (CT) scanner monitors of patients undergoing CT examinations of the head as Diagnostic Reference Levels (DRL) for dose optimisation in Northern Nigeria. Background: A brain CT scan is the most common CT examination performed, and this modality is recognized as delivering a high dose. CT, therefore, contributes significantly to the total collective effective dose to the population. Elimination of unnecessary or unproductive radiation exposure is necessary. To achieve this, practitioners must adhere to the principles of the justification of practices, and optimisation of radiation protection. Furthermore, the development of DRLs for the local context is advised. These reference doses are a guide to the expected exposure dose from a procedure and are useful as an investigation tool to identify incidences where patient doses are unusually high. Methodology: The study was conducted in three radiology departments with CT centres in Northern Nigeria. Data was collected, using a purposive sampling technique, from 60 consenting adult participants (weighing 70 ±3 kg) that had brain CT scans on seventh generations 4&16-slice GE and 16-slice Philips CT scanners. Prior to commencement of the study the CT scanners were certified by the medical physicists. For each brain scan, patient information, exposure factors, weighted computed tomography dose index (CTDIw), volume computed tomography dose index (CTDIvol) and dose length product (DLP) values were recorded. The data were analysed using SPSS version (16) statistical software. The mean, standard deviation and third quartile values of the CTDIw and DLP were calculated. An inter-comparison of the measured doses from the three research sites was conducted. A combined dose for the three centres was calculated, and compared with the reported data from the international communities where there are established DRLs. Results: The mean CTDIw and DLP values were: centre A (88 mGy and 713 mGy.cm), centre B (68 mGy and 1098 mGy.cm), and centre C (70 mGy and 59 mGy.cm). Comparison of CTDIw and DLP for the scanners of the same manufacturers showed statistically significant differences (p=0.003) and (p=0.03) respectively. In the case of the scanners of a different model but the same number of slices, the comparison of DLP was statistically significant (p=0.005) while no significant difference was noted in the measured CTDIw. Third quartile values of the cumulative doses of CTDIw and DLP, for Northern Nigeria were determined as 77 mGy and 985 mGy.cm respectively. Conclusion: The study has established Local DRLs (LDRLs) which are significantly higher than most of the reported data in the literature. Also dose variation between centres was noted. Optimization is thus recommended. Keywords: Head Imaging, Radiation Dose, Dose optimization, Computed Tomography, Local Diagnostic Reference Levels, Radiation Protection

Pathologische Veränderungen der Wirbelsäule können zur Verkleinerung der Foramina intervertebralia der Halswirbelsäule sowie zur Verkürzung der Abstände zwischen den Dornfortsätzen der Brustwirbelsäule führen. Eine Veränderung der Kopf-Hals-Haltung kann ebenfalls die Dimension der Foramina intervertebralia sowie die Abstände zwischen den Dornfortsätzen beeinflussen. Die Bestimmung des Einflusses der Kopf-Hals-Haltung auf die genannten Parameter bei der radiologischen Darstellung der Wirbelsäule war deshalb das Ziel der vorliegenden Arbeit. In drei unterschiedlichen Kopf-Hals-Haltungen wurde die Halswirbelsäule von 25 klinisch unauffälligen Pferden im laterolateralen Strahlengang dargestellt. Laterolaterale Röntgenaufnahmen der Brustwirbelsäule von 23 Pferden ohne klinische Anzeichen einer Erkrankung der Wirbelsäule wurden ebenfalls in drei verschiedenen Kopf-Hals-Haltungen angefertigt. Die Auswertung dieser Aufnahmen erfolgte mit Hilfe von neu entwickelten Messmethoden, die eine hohe Reproduzierbarkeit aufwiesen. Auf den Aufnahmen der Halswirbelsäule wurde die Länge der Wirbelkörper und die Dimension der Foramina intervertebralia bestimmt. Zusätzlich wurden die Winkel zwischen angrenzenden Halswirbeln ermittelt. Der Abstand zwischen benachbarten Dornfortsätzen sowie die Breite der Dornfortsätze wurden für die Auswertung der Aufnahmen der Brustwirbelsäule gemessen. Für eine exaktere Auswertung der Aufnahmen der Brustwirbelsäule wurde ein spezieller Bildfilter entwickelt, der durch eine bessere Detailerkennbarkeit zu einer genaueren Messung der Streckung führte. Sowohl für die Breite der Dornfortsätze als auch für die Länge der Wirbelkörper der Halswirbel konnten keine signifikanten Unterschiede zwischen den Röntgenaufnahmen in den verschiedenen Kopf-Hals-Haltungen gefunden werden. Beide Strecken dienten zur Überprüfung des Versuchsaufbaus, um andere Ursachen für eine unterschiedliche Größe der Messstrecken auszuschließen. Die Foramina intervertebralia waren bei tiefer Kopf-Hals-Haltung signifikant größer als bei den anderen beiden Kopf-Hals-Haltungen (p < 0,05). Zwischen hoher und physiologischer Kopf-Hals-Haltung stellten sich nur die Foramina intervertebralia zwischen sechstem und siebten Halswirbel unterschiedlich groß dar (p < 0,05). Die Abstände zwischen angrenzenden Brustwirbeln waren vom achten bis zum vierzehnten Dornfortsatz in tiefer Kopf-Hals-Haltung größer als in den beiden anderen Kopf-Hals-Haltungen (p < 0,05). Diese Abstände nahmen insgesamt von kranial nach kaudal ab (p < 0,05) ab. Der zwölfte Dornfortsatz diente dabei zur Identifizierung der anderen, da er sich signifikant von den schmaleren kranialen und den breiteren kaudalen Dornfortsätzen unterschied (p < 0,01). Die Kopf-Hals-Haltung während der radiologischen Untersuchung beeinflusst sowohl die Dimension der Foramina intervertebralia als auch den Abstand zwischen den Dornfortsätzen. Deshalb sollte diese bei der Auswertung radiologischer Aufnahmen immer berücksichtigt werden. Die Foramina intervertebralia stellten sich bei tiefer Kopf-Hals-Haltung am größten dar und können somit in dieser am besten beurteilt werden, jedoch kommt es zu einer Veränderung der Anordnung der Wirbel, so dass diese nur noch eingeschränkt beurteilt werden können. Eine tiefe Kopf-Hals-Haltung führt zur Vergrößerung der Abstände zwischen den Dornfortsätzen und kann somit die Beurteilung von Röntgenaufnahmen der Brustwirbelsäule, gerade im Rahmen einer Kaufuntersuchung, beeinflussen. Die Kopf-Hals-Haltung bei der Anfertigung von Röntgenaufnahmen der Wirbelsäule sollte standardisiert werden, um durch verbesserte Vergleichbarkeit Manipulationen und Fehlinterpretationen einzuschränken
Pathological changes of the spine can lead to reduction of the intervertebral foramina dimensions in the cervical spine and to shortening of the distances between the spinous processes in the thoracic spine. However, alteration of the head and neck position influences the dimensions of the intervertebral foramina as well as the distances between the spinous processes. Determining the influence of the head and neck position on these parameters during radiological examination of the equine spine was the aim of this study. In three different head and neck positions lateral-lateral views of the cervical spine in 25 clinically sound horses were radiographically obtained. Lateral-lateral radiographs of the thoracic spine from 23 horses lacking clinical signs of spine diseases were taken in three different head and neck positions. Evaluation of the radiographs was carried out with newly developed measurement techniques providing high reproducibility. On the radiographs of the cervical spine the length of the vertebral bodies and the dimension of the intervertebral foramina were measured. Additionally, the angles between adjacent cervical vertebrae were determined. The distances between adjacent spinous processes and the width of the spinous processes were measured for evaluating the radiographs of the thoracic spines. For a more accurate evaluation of the thoracic spine radiographs a purpose-built image filter was developed, which provided more accurate measurement of the distances through better detail recognition. No significant differences were found for the width of the spinous processes of the thoracic vertebrae and the length of vertebral bodies of the cervical vertebrae between the radiographs taken in the three different head and neck positions. Both these distances were used to verify the experimental set-up to rule out other causes for differences in the measured distances. The intervertebral foramina were significantly wider in the low head and neck position than in the other two head and neck positions (p < 0.05). Between the high and the free head and neck position only the intervertebral foramina of the sixth and seventh cervical vertebrae showed different dimensions (p< 0.05). The distances between the adjacent thoracic vertebrae from the eighth to the fourteenth spinous processes were wider in the low head and neck position compared to the other two head and neck positions (p < 0.05). Altogether, these distances decreased from cranial to caudal (p < 0.05). The twelfth spinous process served for numerical identification of the other spinous processes due to its significant difference in width to the narrower cranial and broader caudal spinous processes (p < 0.05). The head and neck position during radiographic examination influences the dimensions of the intervertebral foramina as well as the distances between the spinous processes. Therefore, it should always be considered when evaluating radiographs. In the low head and neck position the intervertebral foramina turned out to be the widest and could be best assessed. However, this resulted in changes to the alignment of the vertebrae and therefore a limited assessment. A low head and neck position leads to an increase in the distances between the spinous processes and could influence the evaluation of radiographs especially if these are taken as part of a pre-purchase examination. During the radiographic examination of the spine the head and neck position should be standardised in order to reduce manipulation and misinterpretation through better comparability of such radiographs

Orientador: Marcio Ajudarte Lopes
Dissertação (mestrado) - Universidade Estadual de Campinas, Faculdade de Odontologia de Piracicaba
Made available in DSpace on 2018-08-28T00:44:23Z (GMT). No. of bitstreams: 1 LucenaMarkman_Renata_M.pdf: 960885 bytes, checksum: 639bd2b482bba1e49ed3111595f8f4da (MD5) Previous issue date: 2015
Resumo: Estudos sugerem que o tratamento radioterápico em região de cabeça e pescoço possa ser considerado um importante fator desencadeador da formação de calcificações em carótida. No entanto, evidências científicas para tal comprovação são limitadas. Portanto, os objetivos deste estudo foram identificar através de radiografias panorâmicas a prevalência de ateromas calcificados da carótida numa população com câncer de cabeça e pescoço antes e depois de serem submetidos à radioterapia e correlacionar com os aspectos sócio-demográficos e comorbidades destes pacientes. Foram selecionados, de forma retrospectiva, 180 pacientes tratados por radioterapia que tinham radiografias panorâmicas realizadas antes e após o término deste tratamento. Os dados clínicos foram coletados dos prontuários médicos. A análise das radiografias panorâmicas mostrou que 35% dos pacientes apresentaram ateromas calcificados da carótida. Não foi encontrada diferença significativa na prevalência de ateromas antes e após a radioterapia. Com relação aos achados clínicos, houve maior prevalência de acidentes vasculares cerebrais em pacientes com ateromas quando comparados aos pacientes que não apresentaram ateromas (p<0,05). Não foram observadas outras diferenças significativas com relação à idade, gênero, hipertensão arterial, diabetes mellitus, infarto agudo do miocárdio, localização do tumor e dose de radiação recebida. Sendo assim, podemos concluir que apesar da radioterapia não ter modificado a prevalência de ateromas calcificados da carótida nesta população estudada, esta alteração é frequentemente encontrada em pacientes com câncer de cabeça e pescoço. Portanto, é importante que os cirurgiões-dentistas fiquem atentos quanto à presença de ateromas em radiografias panorâmicas de pacientes com câncer de cabeça e pescoço
Abstract: Studies suggest that radiotherapy to the head and neck may be an important triggering factor for calcified carotid artery atheromas. However, scientific evidences to prove this matter are limited. Therefore, this essay aimed to identify the prevalence of calcified carotid artery atheromas observed by panoramic radiograph in a head and neck cancer population before and after radiotherapy and to correlate them with the sociodemographic features and comorbidities of these patients. For this research, 180 patients submitted to radiotherapy that had panoramic radiographs before and after this treatment, were selected retrospectively. Clinical data from these patients were collected from their medical records. The panoramic radiographs were examined and 35% of the patients demonstrated calcified carotid artery atheromas. There was no significant difference in the prevalence of atheromas before and after radiotherapy. According to clinical data, there was a greater prevalence of strokes in patients with calcified carotid artery atheromas when compared to patients who did not have atheromas (p<0.05). Differences related to age, gender, arterial hypertension, diabetes mellitus, acute myocardial infarctation, tumor location and radiotherapy dose were not observed. Thus, we can conclude that although radiotherapy did not alter the prevalence of calcified carotid artery atheromas in the studied population, this alteration is commonly found in head and neck cancer patients. Therefore, it is important that dentists be aware to the presence of calcified carotid artery atheromas in panoramic radiographs of head and neck cancer patients
Mestrado
Estomatopatologia
Mestra em Estomatopatologia

O objetivo do estudo foi correlacionar a presença de alterações radiográficas em quadris de pacientes portadores de dor no quadril a um grupo de pacientes sem dor no quadril. Foram avaliados 122 pacientes com dor no quadril, e 100 pacientes sem dor no quadril. Todos com idade entre 20 e 50 anos. Os pacientes foram submetidos a exames radiográficos, nas incidências AP de pelve ortostático, falso perfil de Lequesne, Dunn, Dunn 45° e Ducroquet. Os parâmetros avaliados foram inclinação e versão acetabular, ângulo CE de Wiberg, espaço articular superolateral, ângulo , ângulo de Lequesne, ângulo VCA, diferença entre o raio da cabeça e do colo femorais (off set), esfericidade da cabeça femoral e a presença de ressalto na transição da cabeça com o colo femoral. Concluiu-se que as melhores incidências para o diagnóstico de impacto femoroacetabular são AP de pelve ortostático, Dunn 45° e Ducroquet, e que as seguintes alterações estão correlacionadas com dor nos quadris: off set diminuído, ângulo aumentado, ângulo de Lequesne aumentado, ângulo CE de Wiberg diminuído, espaço articular diminuído e presença de ressalto na transição cabeça-colo femoral
This study aimed to compare two groups of patients, with and with out hip pain, and correlate them with the existence of radiograph alterations. Weve studied 122 patients with hip pain and 100 asymptomatic; the ages were between 20 to 50 years old in both groups. All patients were roentnographicaly studied in anteroposterior pelvis in orthostatic position, Lequesne false profile, Dunns, Dunns 45° and Ducroquets view. The radiograph parameters analized were the acetabular inclination and vertion, Wiberg CE angle, Lequesne VCA angle, Lequesnes antevertion angle (), angle, superior and lateral joint space, femoral off set, nonspherical of the femoral head and the presence of a bump on the head-neck transition. We conclude that the best incidences to diagnosis of femoroacetabular impingement are AP pelvis orthostatic, Dunn 45° and Ducroquet. The following alterations are correlate with hip pain: lower off set, higher angle, higher Lequesne angle, lower CE angle of Wiberg, lower articular space and bump in the femoral head-neck transition

Submitted by Marco Antonio Oliveira da Silva (maosilva@ipen.br) on 2016-08-26T10:42:03Z No. of bitstreams: 0
Made available in DSpace on 2016-08-26T10:42:03Z (GMT). No. of bitstreams: 0
Para avaliar os níveis de exposição e a dose absorvida em pacientes submetidos a exames de tomografia computadorizada, TC, é necessário calcular os índices de dose em medições com um simulador de PMMA, ou cheio de água. O simulador deve ser capaz de reproduzir as características de absorção e espalhamento do corpo ou parte do corpo humano em um campo de radiação. As grandezas específicas em TC: índice de kerma livre no ar (Ca,100), índice de kerma no ar ponderado (CW), índice de kerma no volume total (Cvol) e produto kerma no ar-comprimento (PKL) devem ser determinadas e comparadas com os níveis de referência já existentes na literatura. Neste trabalho foi desenvolvido um simulador pediátrico craniano, já que no Brasil os níveis de referência para diagnósticos (NRDs) disponíveis foram determinados baseados em um simulador padrão adulto. O simulador desenvolvido inovou em sua construção apresentando materiais que simulam a calota craniana em osso cortical (alumínio) e osso esponjoso (PVC). O seu interior foi preenchido com água destilada. As dimensões foram escolhidas de acordo com as recomendações da Organização Mundial da Saúde e do International Commission on Radiation Units, para o tamanho da cabeça de uma criança de 0 a 5 anos: 160 mm de diâmetro e 155 mm de altura. A calota craniana tem uma espessura de 4 mm e diâmetro interno de 111,9 mm. Para avaliar seu comportamento foram realizados testes em laboratórios e em feixes clínicos. Os resultados apresentaram uma atenuação de até 23% na utilização dos materiais que simulam a calota craniana evidenciando que os valores adotados para os cálculos de NRD podem estar superestimando a dose recebida por pacientes pediátricos. Percebe-se que a dose recebida em exames de crânio apresenta uma distribuição diferente por ser parcialmente atenuada e/ou retroespalhada pela calota craniana, o que não é considerado ao se utilizar o simulador constituído apenas de PMMA.
Tese (Doutorado em Tecnologia Nuclear)
IPEN/T
Instituto de Pesquisas Energéticas e Nucleares - IPEN-CNEN/SP

Thesis (M.S.)--University of Missouri-Columbia, 2008.
The entire dissertation/thesis text is included in the research.pdf file; the official abstract appears in the short.pdf file (which also appears in the research.pdf); a non-technical general description, or public abstract, appears in the public.pdf file. Title from title screen of research.pdf file (viewed on August 19, 2009) Includes bibliographical references.

A necrose asséptica da cabeça do fêmur (NACF) em cães é uma doença auto limitante do quadril em desenvolvimento, caracterizada por uma necrose asséptica, seguida por fratura subcondral, fragmentação, revascularização e remodelação na cabeça femoral. A etiologia da doença é obscura. A radiografia é a modalidade de imagem padrão utilizada para diagnosticar a doença em cães. Foi realizado um estudo retrospectivo de janeiro de 2000 até janeiro de 2010 nas radiografias de coxal com NACF nos cães atendidos no Hospital Veterinário da Faculdade de Medicina Veterinária e Zootecnia da Universidade de São Paulo. Radiografias com NACF foram reavaliadas e os graus de alterações radiográficas foram correlacionados a raça, sexo, idade, membro(s) acometido(s). Foi estudado também a evolução radiográfica dos pacientes que tinham mais de um exame realizado. Analisando os resultados, observou-se que as três principais raças acometidas foram Poodles, Yorkshires e Pinschers. A NACF acomete principalmente animais jovens e de pequeno porte, porém no estudo houve um animal de grande porte e alguns animais com idade avançada. Não houve uma predisposição sexual. Com relação aos membros acometidos, notou-se que o grau 5 da doença apresenta maior incidência no membro pélvico direito e ao estudar a evolução da NACF, observou-se tratar de uma doença progressiva e de evolução lenta. Foram avaliadas imagens em filme radiográfico e imagens digitalizadas, sendo possível fazer uma comparação entre os dois métodos. Todas as imagens digitalizadas foram encontradas, ao contrário das imagens em filme radiográfico, demonstrando a facilidade e rapidez que a digitalização pode trazer.
Aseptic necrosis of the femoral head (ANFH) in dogs is a self limiting disease of the developing hip, characterized by an aseptic necrosis, followed by subchondral fracture, fragmentation, revascularization and remodeling of the femoral head. The etiology of the disease is unclear. In dogs the standard imaging modality is radiography. A retrospective study from January 2000 to January 2010 of ANFH cases attended at the Veterinary Hospital of the University of Sao Paulo was done. Radiographs of the hips diagnosed with ANFH where reexamined, the degree of changes established correlating data with breed, gender, age, and affected member. The three major breeds involved were Poodles, Yorkshires and Pinschers. The ANFH mainly affects young and small animals, but in this study there was one large animal and some animals with advanced age. There was no sexual predisposition. In the affected limbs, it was noted that the grade 5 of the disease has a higher incidence in the right limb. In patients with more than one examination evolution of the radiographic changes was analyzed. No regression of radiographic changes was registered and ANFH showed to be a progressive disease with slow evolution. To work with conventional and digital images showed no difficulty in reading but a substantial portion of conventional images were not found.

Dans le cadre de la Fusion par Confinement Inertiel, la maîtrise de la propagation des faisceaux laser intenses, qui se propagent dans le plasma sous-dense d'une cavité d'ignition, reste un enjeu majeur. En effet, durant leur propagation, les faisceaux vont modifier les paramètres du plasma, ces paramètres contrôlant eux-mêmes la propagation. Cette rétroaction entre le plasma et le laser est potentiellement instable et produit de l'autofocalisation, de la filamentation, etc. Ces mécanismes peuvent alors dégrader fortement la propagation et in fine l'uniformité du dépôt d'énergie recherché.Dans cette étude, expérimentale et numérique, nous nous intéressons à la propagation d'un filament laser (tache focale d'une dizaine de micromètres, impulsion de 1,5 ns et d'intensité variant de 1014 W.cm-2 à 1016 W.cm-2) dans un milieu très sous dense (quelques pour-cents de la densité électronique critique). Deux expériences ont été réalisées sur l'installation de puissance LULI2000 et ont permis à la fois d'observer la transmission laser et de caractériser les gradients de température. Ces gradients sont produits par le transport électronique et influencent la réponse du plasma au laser. Afin de modéliser le rôle des gradients de température dans les instabilités d'auto-focalisation et de filamentation, nous avons associé un code d'hydrodynamique-radiative (FCI2) à un code détaillé de propagation (Héra). Pour compléter les observables précédentes, nous avons aussi mis en œuvre un diagnostic de déflectométrie protonique. Ce diagnostic permet de mesurer les champs électriques présents dans le plasma, ces champs étant issus du chauffage et de l'interaction laser. Un nouvel outil, associant le code de propagation laser et un code Monte-Carlo de transport de protons, a donc été mis en place pour modéliser les déflexions des protons. Cet outil ouvre en plus de nouvelles perspectives pour discuter de l'influence des effets 3D dans l'exploitation de ce diagnostic. Les résultats obtenus confirment l'intérêt à sonder les champs électriques au cœur même du plasma pendant la propagation laser
The understanding and the control of high-power laser propagation into under-dense plasma is important to achieve inertial confinement fusion. During this process, the interaction of the laser with the plasma filling the hohlraum can lead to significant losses of laser energy which prevent ignition. Self-focusing or filamentation of the laser light is one of these phenomena which are desired to be mitigated since they also affect the uniformity of the laser illumination on the hohlraum wall.In order to improve our understanding of the laser-plasma interaction phenomena at play, we describe an experimental and numerical study involving an intense laser pulse between 1014 W.cm-2 and 1016 W.cm-2 , and which interacts with millimetric and under-dense plasma (having density of few % of the critical density). This work presents two experiments fielding a series of diagnostics aimed at well characterizing the laser propagation (Hisac camera) together with heat deposition in plasmas using Thomson scattering. Experimental results will be presented and discussed in the light of detailed simulations performed with the 3D laser propagation code Hera. In order to take into account the temperature gradients within the plasma during the laser propagation, Hera (laser propagation code) and FCI2 (radiation-hydrodynamic code) have been coupled. Besides, proton radiography has been used in order to access to electric fields. The measurements led to the implementation of a new and promising numerical tool using the Hera and Diane codes (Diane is a Monte Carlo particle tracing code). 3D proton radiography modelling opens new possibilities for users of this temporally and spatially resolved diagnostic

Nesta pesquisa foi comparada a diferença das medidas obtidas utilizando-se a análise cefalométrica do perfil tegumentar tendo como base a análise facial de Arnett relacionada à Horizontal Verdadeira com a análise cefalométrica do perfil tegumentar feita a partir do Plano de Frankfurt. Utilizamos 140 radiografias cefalométricas requisitadas como parte de documentação ortodôntica, obtidas de pacientes com idade variando de 06 a 49 anos, sendo 64 do sexo masculino e 76 do sexo feminino, pertencentes ao arquivo do IOM - (Instituto de Odontologia Multidisciplinar) ? RJ. As radiografias cefalométricas em norma lateral foram obtidas pelo mesmo operador, obedecendo ao protocolo adotado pelo IOM. Todos os pacientes foram orientados a assumir a Posição Natural da Cabeça, tendo como referência um espelho posicionado a frente e a Linha Vertical Verdadeira foi obtida por meio da utilização de um fio metálico unido à um prumo de chumbo, posicionado próximo à margem anterior do chassi porta-filme, de forma que apareça à frente do perfil tegumentar do paciente. A partir das medidas lineares obtidas nas Análises Cefalométricas dos Tecidos Moles, foram realizadas análises estatísticas visando dois objetivos: comparar as medidas de A à I obtidas nos traçados (um utilizando como referência uma perpendicular ao Plano Horizontal de Frankfurt e o outro à Linha Vertical Verdadeira) e analisar os resultados comparativamente. Após a análise estatística (Kolmogorov-Smirnov, para distribuição normal de dados; t-Student para amostras emparelhadas e teste não paramétrico de Wilcoxon) e a interpretação dos resultados obtidos, concluímos que houve diferenças significantes entre as formas de medidas das variáveis A, B, C, D, F, G e I, pois o valor do nível descritivo (p-valor) se apresentou abaixo de 0,05. Entretanto para as medidas E e H o valor do nível descritivo (p-valor) se apresentou maior que 0,05, demonstrando não haver diferenças significantes entre as formas dessas medidas. As correlações entre as medidas apresentadas estabelecidas pela análise facial de Arnett, de acordo com este estudo, não deverão ser utilizadas em pacientes que se submeteram à radiografias cefalométricas realizadas a partir do Plano Horizontal de Frankfurt, salvo no caso da distância interlabial, representada pela medida H, que além de não apresentar diferenças significantes neste estudo, não tem, segundo a análise de Arnett, correlação com nenhuma outra medida.
In this research a comparison was made between the differences in measurements obtained using the soft tissue profile?s cephalometric analysis based on Arnett?s facial analysis related to the true vertical with the cephalometric analysis of soft tissue profile based on the Frankfurt Plan. A total of 140 lateral cephalometric radiographs were used as part of the orthodontic documentation, taken from patients whose ages ranged from 06 to 49 years of age, of these 64 males and 76 females, being part of the files of the IOM (Instituto de Odontologia Multidisciplinar do Rio de Janeiro). The lateral cephalometric radiographs were obtained from the same operator obeying the protocols adapted by the IOM. All patients were oriented to place themselves in the Natural Head Posture using, as a reference, a mirror in front of then and the true vertical line was obtained using a metal wire and a plumb-line, placed close to the frontal chassis of the film chamber, in such a way that it appears in front of the soft tissue profile of the patient. Parting from the lineal measurements obtained from the Cephalometric Analyses of the Soft Tissues statistical analyses were made relating to two objectives: to compare the measurements from A to I obtained from the drafts/ sketches (one using as it reference a perpendicular to the Frankfurt Horizontal Plane and the other the True Vertical Line), comparatively analyse these results. After the statistical analysis (Kolgomorov Smirnov) for a normal data distribution: t-student for matched pairs and the no-parametric Wilcanox test) and the analysis of the results obtained, it was concluded that there were significant differences between the forms of the measurements of the variables A, B, C, D, F, G and I since the descriptive value (p-value) was below 0,05. The measurements for E and H, however, being over 0,05, showing than there were no significant differences between these forms of measurement. The correlation between the demonstrated measurements established by Arnett?s facial analysis, in accordance with this study, should not be used in patients who have undergone lateral cephalometric radiograph initiated on the basis of the Frankfurt Horizontal Plane except in the case of interlabial distance represented by the measurement H, which even differences in this study, does not have, according to Arnett?s studies, correlations with any other measurements.

The influence of processing and process parameters plays a key role for the Aluminium foundry and transport industries as it affects the quality and soundness of the cast products. Particularly, the choice of a process chain in Aluminium foundry, otherwise of process parameters, influences the reject rates, hence casting costs, the process yield and the production rate. The process chain in Aluminium foundry is a complex sequence of processes and the final casting quality depends on many parameters. Several aspects of this subject are still not fully understood. The motivation of the research presented in this doctoral thesis work was, therefore, to fill this gap in knowledge. The study has aimed at understanding the influence of various process and process parameters of foundry on the quality of aluminium alloy castings and, in particular, Al-Si based castings. A literature review and a sufficient background of previously reported results on the influence of processing and process parameters on the quality of aluminium alloy castings, physical fundamentals as well as industrial challenges, motivation and goals were carried out. Special attention in Aluminium process chain has been given to: The modification of aluminium-silicon cast alloys: before casting aluminium alloys, the molten metal can be treated in order to improve the microstructure and properties of alloys by addition of small quantities of certain "modifying" elements. The pouring of molten metal into the mould: this is one of the critical steps in foundry technology, since the behaviour of the liquid and its subsequent solidification and cooling determine whether the cast shape will be properly formed, internally sound and free from defects. The chill casting processes, such as gravity, low-pressure and high-pressure die casting processes: the essential feature of chill casting is the use of permanent metal moulds, into which the molten alloy is either poured directly or injected under pressure, giving rise to the separate processes of gravity and low/high pressure die casting. Permanent moulds offer obvious advantages in terms of simplicity of production for large quantities of parts, but are subject to limitations yet to be discussed. The heat treating process applied to high-pressure die castings: conventional die castings are utilised to produce many products but unfortunately the presence of porosity limits the application. In addition to porosity, the microstructure inherent with conventional die casting could not meet the mechanical requirements needed for many applications. Subsequent heat treating, which can positively alter the microstructure, is rarely possible due to defects that emerge during thermal processing, such as blistering.

Fong, Kwan Ying.
Thesis (M.Phil.)--Chinese University of Hong Kong, 2010.
Includes bibliographical references (leaves 90-103).
Abstracts in English and Chinese.
Chapter Chapter 1: --- "Introduction, problems and objectives" --- p.1
Chapter 1.1 --- Introduction --- p.1
Chapter 1.2 --- Problems --- p.3
Chapter 1.3 --- Objectives --- p.3
Chapter Chapter 2: --- Background --- p.4
Chapter 2.1. --- Head and Neck Cancer --- p.4
Chapter 2.2 --- Diagnostic Imaging of Head and Neck Cancer --- p.5
Chapter 2.3. --- Magnetic Resonance Imaging- Physics --- p.8
Chapter 2.3.1 --- Nuclear Magnetic Resonance Principle --- p.8
Chapter 2.3.2 --- Proton Magnetic Resonance Imaging --- p.8
Chapter 2.3.3 --- Relaxation --- p.12
Chapter 2.3.4 --- Tl- and T2-weighted Imaging --- p.12
Chapter 2.3.5 --- Diffusion Weighted Imaging (DWI) --- p.13
Chapter 2.3.6 --- Magnetic Resonance Spectroscopy- Single Voxel Spectroscopy and Chemical Shift Imaging --- p.15
Chapter Chapter 3: --- Diffusion-weighted imaging in the evaluation head of and neck cancer --- p.21
Chapter 3.1 --- Introduction - Diffusion-Weighted Imaging in Tumors --- p.21
Chapter 3.2 --- DWI of Nasopharyngeal Carcinoma --- p.22
Chapter 3.2.1 --- Introduction and Objectives --- p.22
Chapter 3.2.2. --- Methods --- p.23
Chapter 3.2.3. --- Results --- p.27
Chapter 3.2.4 --- Discussion --- p.31
Chapter 3.3 --- DWI of Primary Tumors: Comparison of NPC with Squamous Cell Carcinoma and Extra-nodal Non-Hodgkin Lymphoma --- p.33
Chapter 3.3.1 --- Introduction and Objectives --- p.33
Chapter 3.3.2. --- Methods --- p.34
Chapter 3.3.3. --- Results --- p.35
Chapter 3.3.4 --- Discussion --- p.42
Chapter 3.3.5 --- Summary of DWI in Head and Neck Cancer --- p.44
Chapter Chapter 4: --- Chemical shift imaging of head and neck tumors --- p.45
Chapter 4.1 --- Introduction - Single Voxel Spectroscopy and Chemical Shift Imaging --- p.45
Chapter 4.2 --- CSI - Methods Used to Reduce Magnetic Field Inhomogeneity --- p.48
Chapter 4.3 --- Phantom studies - CSI Experiments Using Phantoms --- p.51
Chapter 4.3.1 --- Introduction and Objectives --- p.51
Chapter 4.3.2. --- Methods --- p.51
Chapter 4.3.3 --- Experiment and MR Protocol --- p.54
Chapter 4.3.4 --- Data Analysis --- p.58
Chapter 4.3.5 --- Phantom Experimental Results --- p.59
Chapter 4.3.6 --- Discussion and Conclusion on Phantom Experiments --- p.69
Chapter 4.4 --- In vivo CSI Study of Human Head and Neck Tumors --- p.72
Chapter 4.4.1 --- Introduction and Objectives --- p.72
Chapter 4.4.2 --- Patient Selection --- p.73
Chapter 4.4.3 --- MRI and CSI Protocol --- p.73
Chapter 4.4.4 --- Data Analysis --- p.74
Chapter 4.4.5 --- Results from CSI on Patients --- p.74
Chapter 4.4.6 --- Discussion and Conclusion of CSI on Patients --- p.81
Chapter Chapter 5: --- "Summary, conclusion and future studies" --- p.87
Chapter 5.1 --- Summary --- p.87
Chapter 5.2 --- Conclusion --- p.89
Chapter 5.3 --- Future Studies --- p.89
References --- p.90
Publications --- p.104

Pathologische Veränderungen der Wirbelsäule können zur Verkleinerung der Foramina intervertebralia der Halswirbelsäule sowie zur Verkürzung der Abstände zwischen den Dornfortsätzen der Brustwirbelsäule führen. Eine Veränderung der Kopf-Hals-Haltung kann ebenfalls die Dimension der Foramina intervertebralia sowie die Abstände zwischen den Dornfortsätzen beeinflussen. Die Bestimmung des Einflusses der Kopf-Hals-Haltung auf die genannten Parameter bei der radiologischen Darstellung der Wirbelsäule war deshalb das Ziel der vorliegenden Arbeit. In drei unterschiedlichen Kopf-Hals-Haltungen wurde die Halswirbelsäule von 25 klinisch unauffälligen Pferden im laterolateralen Strahlengang dargestellt. Laterolaterale Röntgenaufnahmen der Brustwirbelsäule von 23 Pferden ohne klinische Anzeichen einer Erkrankung der Wirbelsäule wurden ebenfalls in drei verschiedenen Kopf-Hals-Haltungen angefertigt. Die Auswertung dieser Aufnahmen erfolgte mit Hilfe von neu entwickelten Messmethoden, die eine hohe Reproduzierbarkeit aufwiesen. Auf den Aufnahmen der Halswirbelsäule wurde die Länge der Wirbelkörper und die Dimension der Foramina intervertebralia bestimmt. Zusätzlich wurden die Winkel zwischen angrenzenden Halswirbeln ermittelt. Der Abstand zwischen benachbarten Dornfortsätzen sowie die Breite der Dornfortsätze wurden für die Auswertung der Aufnahmen der Brustwirbelsäule gemessen. Für eine exaktere Auswertung der Aufnahmen der Brustwirbelsäule wurde ein spezieller Bildfilter entwickelt, der durch eine bessere Detailerkennbarkeit zu einer genaueren Messung der Streckung führte. Sowohl für die Breite der Dornfortsätze als auch für die Länge der Wirbelkörper der Halswirbel konnten keine signifikanten Unterschiede zwischen den Röntgenaufnahmen in den verschiedenen Kopf-Hals-Haltungen gefunden werden. Beide Strecken dienten zur Überprüfung des Versuchsaufbaus, um andere Ursachen für eine unterschiedliche Größe der Messstrecken auszuschließen. Die Foramina intervertebralia waren bei tiefer Kopf-Hals-Haltung signifikant größer als bei den anderen beiden Kopf-Hals-Haltungen (p < 0,05). Zwischen hoher und physiologischer Kopf-Hals-Haltung stellten sich nur die Foramina intervertebralia zwischen sechstem und siebten Halswirbel unterschiedlich groß dar (p < 0,05). Die Abstände zwischen angrenzenden Brustwirbeln waren vom achten bis zum vierzehnten Dornfortsatz in tiefer Kopf-Hals-Haltung größer als in den beiden anderen Kopf-Hals-Haltungen (p < 0,05). Diese Abstände nahmen insgesamt von kranial nach kaudal ab (p < 0,05) ab. Der zwölfte Dornfortsatz diente dabei zur Identifizierung der anderen, da er sich signifikant von den schmaleren kranialen und den breiteren kaudalen Dornfortsätzen unterschied (p < 0,01). Die Kopf-Hals-Haltung während der radiologischen Untersuchung beeinflusst sowohl die Dimension der Foramina intervertebralia als auch den Abstand zwischen den Dornfortsätzen. Deshalb sollte diese bei der Auswertung radiologischer Aufnahmen immer berücksichtigt werden. Die Foramina intervertebralia stellten sich bei tiefer Kopf-Hals-Haltung am größten dar und können somit in dieser am besten beurteilt werden, jedoch kommt es zu einer Veränderung der Anordnung der Wirbel, so dass diese nur noch eingeschränkt beurteilt werden können. Eine tiefe Kopf-Hals-Haltung führt zur Vergrößerung der Abstände zwischen den Dornfortsätzen und kann somit die Beurteilung von Röntgenaufnahmen der Brustwirbelsäule, gerade im Rahmen einer Kaufuntersuchung, beeinflussen. Die Kopf-Hals-Haltung bei der Anfertigung von Röntgenaufnahmen der Wirbelsäule sollte standardisiert werden, um durch verbesserte Vergleichbarkeit Manipulationen und Fehlinterpretationen einzuschränken.:1 Einleitung ................................................................................................................................. 1 2 Hypothesen .............................................................................................................................. 3 3 Eigene wissenschaftliche Orginalarbeiten ....................................................................... 4 3.1 Publikation 1: ................................................................................................................. 4 Die Bedeutung der Kopf-Hals-Haltung bei der röntgenologischen Darstellung der Foramina intervertebralia das Pferdehalses in der seitlichen Projektion ........................ 4 3.2 Publikation 2: ............................................................................................................... 25 Influence of head and neck position on radiographic measurement of distances between thoracic spinous processes in clinically sound horses .................................... 25 4 Diskussion .............................................................................................................................. 45 4.1 Ziele der Arbeit............................................................................................................. 45 4.2 Auswahl der Pferde ...................................................................................................... 45 4.3 Position der Pferde während der Untersuchungen ....................................................... 46 4.4 Röntgenologische Darstellung der Wirbelsäule der Pferde .......................................... 47 4.5 Auswertung der röntgenologischen Aufnahmen der Halswirbelsäule ......................... 49 4.6 Auswertung der röntgenologischen Aufnahmen der Brustwirbelsäule ........................ 51 4.7 Ergebnisse der Messungen der Halswirbelsäule .......................................................... 52 4.8 Ergebnisse der Messungen der Brustwirbelsäule ......................................................... 53 4.9 Klinische Relevanz für die röntgenologische Untersuchung des Halses ..................... 55 4.10 Klinische Relevanz für die röntgenologische Untersuchung des Rückens .................. 56 4.11 Abschließende Betrachtung .......................................................................................... 58 6 Zusammenfassung ............................................................................................................... 60 7 Summary ................................................................................................................................ 62 8 Literaturverzeichnis ............................................................................................................ 64 Danksagung ........................................................................................................................................ 71
Pathological changes of the spine can lead to reduction of the intervertebral foramina dimensions in the cervical spine and to shortening of the distances between the spinous processes in the thoracic spine. However, alteration of the head and neck position influences the dimensions of the intervertebral foramina as well as the distances between the spinous processes. Determining the influence of the head and neck position on these parameters during radiological examination of the equine spine was the aim of this study. In three different head and neck positions lateral-lateral views of the cervical spine in 25 clinically sound horses were radiographically obtained. Lateral-lateral radiographs of the thoracic spine from 23 horses lacking clinical signs of spine diseases were taken in three different head and neck positions. Evaluation of the radiographs was carried out with newly developed measurement techniques providing high reproducibility. On the radiographs of the cervical spine the length of the vertebral bodies and the dimension of the intervertebral foramina were measured. Additionally, the angles between adjacent cervical vertebrae were determined. The distances between adjacent spinous processes and the width of the spinous processes were measured for evaluating the radiographs of the thoracic spines. For a more accurate evaluation of the thoracic spine radiographs a purpose-built image filter was developed, which provided more accurate measurement of the distances through better detail recognition. No significant differences were found for the width of the spinous processes of the thoracic vertebrae and the length of vertebral bodies of the cervical vertebrae between the radiographs taken in the three different head and neck positions. Both these distances were used to verify the experimental set-up to rule out other causes for differences in the measured distances. The intervertebral foramina were significantly wider in the low head and neck position than in the other two head and neck positions (p < 0.05). Between the high and the free head and neck position only the intervertebral foramina of the sixth and seventh cervical vertebrae showed different dimensions (p< 0.05). The distances between the adjacent thoracic vertebrae from the eighth to the fourteenth spinous processes were wider in the low head and neck position compared to the other two head and neck positions (p < 0.05). Altogether, these distances decreased from cranial to caudal (p < 0.05). The twelfth spinous process served for numerical identification of the other spinous processes due to its significant difference in width to the narrower cranial and broader caudal spinous processes (p < 0.05). The head and neck position during radiographic examination influences the dimensions of the intervertebral foramina as well as the distances between the spinous processes. Therefore, it should always be considered when evaluating radiographs. In the low head and neck position the intervertebral foramina turned out to be the widest and could be best assessed. However, this resulted in changes to the alignment of the vertebrae and therefore a limited assessment. A low head and neck position leads to an increase in the distances between the spinous processes and could influence the evaluation of radiographs especially if these are taken as part of a pre-purchase examination. During the radiographic examination of the spine the head and neck position should be standardised in order to reduce manipulation and misinterpretation through better comparability of such radiographs.:1 Einleitung ................................................................................................................................. 1 2 Hypothesen .............................................................................................................................. 3 3 Eigene wissenschaftliche Orginalarbeiten ....................................................................... 4 3.1 Publikation 1: ................................................................................................................. 4 Die Bedeutung der Kopf-Hals-Haltung bei der röntgenologischen Darstellung der Foramina intervertebralia das Pferdehalses in der seitlichen Projektion ........................ 4 3.2 Publikation 2: ............................................................................................................... 25 Influence of head and neck position on radiographic measurement of distances between thoracic spinous processes in clinically sound horses .................................... 25 4 Diskussion .............................................................................................................................. 45 4.1 Ziele der Arbeit............................................................................................................. 45 4.2 Auswahl der Pferde ...................................................................................................... 45 4.3 Position der Pferde während der Untersuchungen ....................................................... 46 4.4 Röntgenologische Darstellung der Wirbelsäule der Pferde .......................................... 47 4.5 Auswertung der röntgenologischen Aufnahmen der Halswirbelsäule ......................... 49 4.6 Auswertung der röntgenologischen Aufnahmen der Brustwirbelsäule ........................ 51 4.7 Ergebnisse der Messungen der Halswirbelsäule .......................................................... 52 4.8 Ergebnisse der Messungen der Brustwirbelsäule ......................................................... 53 4.9 Klinische Relevanz für die röntgenologische Untersuchung des Halses ..................... 55 4.10 Klinische Relevanz für die röntgenologische Untersuchung des Rückens .................. 56 4.11 Abschließende Betrachtung .......................................................................................... 58 6 Zusammenfassung ............................................................................................................... 60 7 Summary ................................................................................................................................ 62 8 Literaturverzeichnis ............................................................................................................ 64 Danksagung ........................................................................................................................................ 71

Undesirable work factors, such as awkward upper body postures and repetitive arm motion, in the workplace can lead to upper extremity pain. Research suggests that these work-related factors, and subsequent rotator cuff fatigue, may cause the subacromial space (the space between the inferior acromion surface and superior humerus) of the shoulder to decrease. Reducing this space can create impingement of the interposed tissues, which causes shoulder pain. The aim of this study was to examine superior humeral head excursion and changes in the width of the subacromial space (acromio-humeral interval) after fatiguing the rotator cuff musculature. Four anterior-posterior radiographs of the glenohumeral joint at arm abduction angles of 0˚, 45˚, 90˚ and 135˚ were taken before and after a fatiguing task. The fatiguing task was a simulated job task requiring shoulder flexion/abduction and internal/external rotation, with the intention of exhausting the entire rotator cuff. The position of the humeral head with respect to the glenoid cavity was significantly affected both by arm angle and fatigue state; the mean humeral superior excursion following fatigue was 0.63±1.76mm. In the pre-fatigued state, increasing arm angle was related to superior translation until 90˚, after which the humeral head moved inferiorly to a more central position. In the post-fatigued state, the inability of the rotator cuff to centralize the humeral head led to increasing translations with higher elevations. Although the magnitude of translation in this study was smaller than seen in patients with rotator cuff tears, continuous overhead work demonstrably created rotator cuff fatigue, which apparently inhibited the ability of the shoulder musculature to resist upward translation of the humerus. Therefore, jobs that require overhead and repetitive work arguably put the worker at greater risk for superior translation of the humerus and subsequent related tissue damage.

no
Introduction In the face of growing demand in radiology, skill mix initiatives have sought to improve and expand service provision. Within the UK radiographer reporting is now widespread, although the growth in computerised tomography (CT) head reporting has not been as rapid as anticipated. The literature in this area is limited, but case studies have highlighted the successful implementation of this training through new radiographer roles in practice. Method A cross-sectional survey was developed to elicit information from radiographers and managers on their experiences before, during and after post-graduate training in CT head reporting. Results Seventy one responses were received comprising 48 past students (n = 48/111; 43.2%) and 23 service managers (n = 23/67; 34.3%). Key factors for the development were personal continual professional development for students and departmental need for managers. Challenges during training included a lack of study time due to staff shortages and access to radiologist mentors. Only 48.8% of students responding have gone on to use the new skills in practice cited reasons include staff shortages, resistance from radiologists and increase in radiological staffing. Conclusions This qualitative study has demonstrated that those trusts who have implemented CT head reporting have evidenced perceptible benefits for both the department and individuals. Those radiographers who are successfully reporting have shown themselves to be highly motivated and persistent in their development.