Auswahl der wissenschaftlichen Literatur zum Thema „Furnances“
Geben Sie eine Quelle nach APA, MLA, Chicago, Harvard und anderen Zitierweisen an
Inhaltsverzeichnis
Machen Sie sich mit den Listen der aktuellen Artikel, Bücher, Dissertationen, Berichten und anderer wissenschaftlichen Quellen zum Thema "Furnances" bekannt.
Neben jedem Werk im Literaturverzeichnis ist die Option "Zur Bibliographie hinzufügen" verfügbar. Nutzen Sie sie, wird Ihre bibliographische Angabe des gewählten Werkes nach der nötigen Zitierweise (APA, MLA, Harvard, Chicago, Vancouver usw.) automatisch gestaltet.
Sie können auch den vollen Text der wissenschaftlichen Publikation im PDF-Format herunterladen und eine Online-Annotation der Arbeit lesen, wenn die relevanten Parameter in den Metadaten verfügbar sind.
Zeitschriftenartikel zum Thema "Furnances"
Hiramatsu, Mineyuki, und Yasuhiro Takahashi. „Regenerative Burner-combustion-control System for Rehealing Furnances.“ DENKI-SEIKO[ELECTRIC FURNACE STEEL] 68, Nr. 3 (1997): 193–96. http://dx.doi.org/10.4262/denkiseiko.68.193.
Der volle Inhalt der QuelleKosenok, V. A., und V. P. Il'chuk. „Requirements on heaters for high-temperature treatment furnances“. Fibre Chemistry 25, Nr. 3 (1993): 224–26. http://dx.doi.org/10.1007/bf00551139.
Der volle Inhalt der QuellePrudenziati, M., L. Moro, B. Morten, F. Sirotti und L. Sardi. „AG-Based Thick-Film Front Metallization of Silicon Solar Cells“. Active and Passive Electronic Components 13, Nr. 3 (1989): 133–50. http://dx.doi.org/10.1155/1989/27954.
Der volle Inhalt der QuelleHan, Jun Shu, Zheng Wang, Li Hua Wu, Chao Wu und Wen Chang Zhang. „Design of a Small Medical Waste Pyrolysis Furnance“. Advanced Materials Research 518-523 (Mai 2012): 3590–94. http://dx.doi.org/10.4028/www.scientific.net/amr.518-523.3590.
Der volle Inhalt der QuellePoenaru, I. O., E. Ardelean, A. Budiul Berghian, M. Magaon und Z. Trisovic. „Research regarding oxygen content reduction in steels“. Journal of Physics: Conference Series 2714, Nr. 1 (01.02.2024): 012024. http://dx.doi.org/10.1088/1742-6596/2714/1/012024.
Der volle Inhalt der QuelleHo, J. C., und T. T. Chandratilleke. „Thermodynamic analysis of an electric arc furnance“. Energy Conversion and Management 31, Nr. 2 (Januar 1991): 179–86. http://dx.doi.org/10.1016/0196-8904(91)90070-y.
Der volle Inhalt der QuelleYohana, Eflita, MSK Tony Suryo, Iqbal Ambari, Randa Permana und Novi Laura Indrayani. „Analisis Perpindahan Panas dan Exergi pada Boiler Wanson I Tipe Fire Tube“. ROTASI 20, Nr. 2 (05.07.2018): 78. http://dx.doi.org/10.14710/rotasi.20.2.78-83.
Der volle Inhalt der QuelleКlimovitsky, M. D. „OPTIMAL METAL HEATING MANAGEMENT IN COMPLEX “FURNANCE-ROLLING-MILL”“. Izvestiya Visshikh Uchebnykh Zavedenii. Chernaya Metallurgiya = Izvestiya. Ferrous Metallurgy 57, Nr. 1 (28.03.2015): 56. http://dx.doi.org/10.17073/0368-0797-2014-1-56-58.
Der volle Inhalt der QuelleBulakh, V. L., L. G. Sizintseva und E. I. Aksel'rod. „Siliceous articles with improved thermal stability for coke furnance“. Refractories 32, Nr. 3-4 (März 1991): 194–97. http://dx.doi.org/10.1007/bf01290488.
Der volle Inhalt der Quelle(Rob) Stephens, Robert L. „Advancess in furnance integrity—Partly a materials engineering problem“. JOM 57, Nr. 10 (Oktober 2005): 27. http://dx.doi.org/10.1007/s11837-005-0147-5.
Der volle Inhalt der QuelleDissertationen zum Thema "Furnances"
Racková, Eliška. „Areál bývalého šamotového závodu MŠLZ Mladějov na Moravě - funkční využití areálu pro potřeby Průmyslového muzea Mladějov“. Master's thesis, Vysoké učení technické v Brně. Fakulta architektury, 2010. http://www.nusl.cz/ntk/nusl-215644.
Der volle Inhalt der QuelleWang, Tzu-Jung, und 王慈榕. „The Optimization of Oil-Refinery-Furnance Energy Saving by Statistic Analysis“. Thesis, 2011. http://ndltd.ncl.edu.tw/handle/98424602024234317659.
Der volle Inhalt der Quelle國立高雄第一科技大學
環境與安全衛生工程研究所
99
The whole world requirement petrochemical industry fuel still increase. Industrial apartment to improve energy usage efficiency to achieve the best energy conservation beneficial result and minimal pollutants emission. Normality analyzed operate factor of changes to best value on site, almost in accordance with practice experience, the theory inferential reasoning basis be deficient in quantitative analysis method. The research use statistical software to construct analyzing model to search operate factor of changes to best value intersects rightly compared to value on site for waste rich-hydrogen fuel. The revision model makes predicting value correspond with measured, therefore we can reduce more unnecessary resource wasting for energy conservation and profit creation. The result reveals that use multiple regression Model for factorial analysis, the combustion efficiency would be the best when natural gas mix with rich-hydrogen fuel in the range between 250 m3/hr to 600 m3/hr. When comprehensive using rich-hydrogen fuel, the best range of excess air will be 2.98 % to 3.01 %. The best range of temperature in preheating air will be 225oC to 230oC. Using the value for heating furnace could save the amount of gas consumption for 8.4 × 105 m3 and decrease the emission of NOx for 10.6 % and decrement carbon dioxide probably 1.0×103 tons/year. It could be analyzed the best economical and to agree with operate model by changes excess quantity of air and temperature of prepare heating in multiple regression.
Chang, Shao-Pu, und 張少璞. „Rutting Resistance of Asphalt Concrete Pavement with the Basic Oxygen Furnance Slag of Different Grain Sizes“. Thesis, 2017. http://ndltd.ncl.edu.tw/handle/03531920981697854113.
Der volle Inhalt der Quelle國立中興大學
土木工程學系所
105
Abstract In Taiwan,the variation of urban and rural developmentand population clusterto the city cause the roads used with highly loading bearing capacityso it has tomaintain frequently for the past few years.This study uses the physical property of the Basic Oxygen Furnace Slagdesigns of mix proportion with its different grain sizes instead of part ofnatural gradation and analyses the differences and results for rutting resistance through the test data. First of all, itconduct two sets design of mix proportionwith 19mm nominal maximum size added by 43% of basic oxygen furnace slag of different grain sizes. Determining the curve of combined gradation of aggregate throughaggregatesieve analysis,specific gravity, water absorption , physical properties tests before the design of mix proportion .Moreover , itdecidedthe porosity and optimum oil content then checked the stability,the porosity between aggregate and asphalt filling rate in accordance with ASTM. Finally, conducting the retained strength and wheel-tracking tests analyzed the differences of data. In conclusion, itevaluated the influence for rutting resistance of dense grade asphalt concrete pavement with the basic oxygen furnace slag of different grain sizes. The results showed the total settlement of asphalt concrete , dynamic stability and deformation after adding the basic oxygen furnace have a betterbehavior. Using the AC3 and AC6 basic oxygen furnace (hereinafter to be referred as AC3 an AC6) instead of the natural gradation in the same grain size, the AC6 is better. It may be the reasonthe shape and rigidity of it blend into the asphalt concrete has higher ability of resistance deformation than the same grain sizes of the natural gradation. It suggests that it can use the AC6 with AC3 to enhance the ability of rutting resistance on the highly loading bearing capacity roads.
Lin, Keh-Ming, und 林克明. „The estimating of the electrode for arc refining steel method and the study for graphite furnance designing“. Thesis, 1996. http://ndltd.ncl.edu.tw/handle/62648431197322140604.
Der volle Inhalt der Quelle國立臺灣大學
材料科學(工程)研究所
84
The estimating of the electrode for arc refining steel method and the study for graphite furnance designing. Deviding into three parts, the first part is the formation mechanism of mesophase and the study of evalution production of mesophase. The second, estimating experiment for the design of graphite furnance. The third, designing the graphite furnance. In the first part, applying the Tuguchi method to get the manufacturing condition that suits for being the electrode for arc refining steel. CTP by way of the above manufacturing condition that can obtain the mesophase with high area fraction about 72% and large particle size about 39 um. After above process, the mesophase is raw materials to produce the electrode for arc refining steel. The second part, by using the Tuguchi method that obtain the manufacturing conditoin for high degrees of graphitization and high conductivity to suit for the electrode for arc refiningsteel method. After 27 times of experiment, promotion the degrees of graphitization of IG-11 from 52% to 81.1% and upgrading55.87%. The conductivity that was promoten from 11 u.OMEGA.m to 10.03 u.OMEGA.m and upgrading to 8.82%. The electron power of furnance, ampere of furnance and voltage of furnance, that can be the basis of designing graphit -ization furnance. On the third part, applying the results of foreward experiment, such as electron power of furnance, ampere of furnance and volatge of furnance. Experiment those datas to the scale of industry. Designing the graphitization furnance of huge production for industry.
Yang, Hwai-Ren, und 楊懷仁. „Effects of the Aggregate Gradation on Mix Proportioning Technology and Mechanical Properties of TAICON Concrete with Blast Furnance Slag“. Thesis, 1999. http://ndltd.ncl.edu.tw/handle/m7kg6m.
Der volle Inhalt der Quelle國立臺灣科技大學
營建工程系
87
The objective of this study is to establish the proportioning technology of TAICON with blast furnance slag and investigate the effects of the aggregate gradation on mixing ratio and mechanical properties of TAICON with blast furnance slag. In this study , first, slump of TAICON is set at 22±2cm,slump flow spread is set at 50±10cm and 28 days compressive strength is set at 280-350kg/cm2,the conduct mix design with Modified ACI mix design based on parameters such as water binder ratio, slag replacing cement, gradations of aggregate, maximum size of aggregates (Dmax), FM of aggregate , etc., and trial mix to find out a rational mixing ratio. After setting up the ratio, take compression、split tension、shear、and fracture toughness tests and analyze its microscope properties. The study results show that in fresh concrete the slump and fluidity of TAICON with high water binder ratio, high replacing amount with blast furnance slag , and high FM are better while aggregates of maximum size Dmax greater than 3/2" cannot meet the quality requirements of TAICON. In harden concrete , the early strength of concrete with higher replacing amount of blast furnance slag is lower but the later strength is higher. The strength of concrete with coarse aggregate of maximum size Dmax at 3/4" is the highest. The strength of concrete using coarse sand is higher than that using fine sand, that of gradation upper limit is higher than that of gradation lower limit, that of coarse sand and fine stone is higher than that of coarse stone and find sand. In TAICON the strength of flexural、shear、split tension and fracture toughness have positive relation to the compressive strength but the correlation between ultrasonic velocity and unit weight , static elastic modulus is poor.
Zeng, Yi-Lin, und 曾伊麟. „Performance Evaluation On Porous Asphalt Concrete Mixed with Polymer-Modified Cement between Crushed Stone and Basic Oxygen Furnance Slag“. Thesis, 2009. http://ndltd.ncl.edu.tw/handle/38629120928596678509.
Der volle Inhalt der QuelleGUPTA, KARTIC. „EFFECT OF AIR COOLED BLAST FURNANCE SLAG AND METAKAOLIN ON COMPRESSIVE AND FLEXURAL STRENGHTH OF CONCRETE CONTAINING FLY ASH“. Thesis, 2018. http://dspace.dtu.ac.in:8080/jspui/handle/repository/16364.
Der volle Inhalt der QuelleLin, Qun-Kay, und 林群凱. „Performance Evaluation of Basic Oxygen Furnance Slag in Porous Asphalt Concrete Mixed between with AC-30 and AR-80 Asphalt Cement“. Thesis, 2009. http://ndltd.ncl.edu.tw/handle/65673179526341740579.
Der volle Inhalt der QuelleChen, Kung-Chen, und 陳坤辰. „Effect of Electric Arc furnane Slag as Coarse Aggregate for Control Low Strength Material“. Thesis, 2017. http://ndltd.ncl.edu.tw/handle/7j2463.
Der volle Inhalt der Quelle國立臺灣海洋大學
河海工程學系
105
The purpose of this study is to investigate the effects of the use of arc furnace ballast to replace the coarse-grained materials for CLSM characteristics under different standard requirements. The control of low-strength backfill material (CLSM) To reflect the spirit of low cost, environmental protection, waste recycling and sustainable use. The research part can be divided into two parts: the first part is for the arc furnace ballast instead of coarse aggregates for the CLSM of the new filling, liquidity and other properties to be discussed, the second part is for hard solid concrete Observations of mechanical properties such as compressive strength at different ages. The test results show that the arc furnace ballast is roughly in line with the requirements of alternative control low-strength backfill material coarse aggregate. And the appropriate level of the ballast can also be mixed into a suitable control of low-strength backfill materials, and even the strength of the development of natural particles than the control of low-strength backfill material is better. It is feasible to make controlled low strength backfill material by replacing the coarse aggregate with electric arc furnace and to optimize the amount of 75%.
Bücher zum Thema "Furnances"
Kjäldman, Lars. Numerical simulation of combustion and nitrogen pollutants in furnances. Espoo: Technical Research Centre of Finland, 1993.
Den vollen Inhalt der Quelle findenWestern Australia. Environmental Protection Authority. Proposed aluminium smelter, Kemerton, International Aluminium Consortium of Western Australia: Report and recommendations. Perth, W.A: Dept. of Conservation and Environment, 1985.
Den vollen Inhalt der Quelle findenUnited States. National Aeronautics and Space Administration., Hrsg. High temperature transparent furnance development. Glastonbury, CT: Thoughtventions Unlimited, 1997.
Den vollen Inhalt der Quelle findenHartman, Alan D. Design of an experimental electric arc furnance. Washington, D.C: U.S. Dept. of the Interior, Bureau of Mines, 1992.
Den vollen Inhalt der Quelle findenCanada. Renewable Energy Resources Branch. How to use the CSA B415 performance standard to improve furnance efficiency. [Ottawa: The Dept., 1987.
Den vollen Inhalt der Quelle findenOlsson, S. Calibration of Fire Resistance Furnances with Plate Thermometers (Calibration of Fire Resistance Furnances with Plate Thermometers). European Communities / Union (EUR-OP/OOPEC/OPOCE), 1993.
Den vollen Inhalt der Quelle findenArmstrong, Robert, und John Bourne. Modern Practice of Boiler Engineering, Containing Observations on the Construction of Steam Boilers; and upon Furnances Used for Smoke Prevention, with a Chapter on Explosions. Creative Media Partners, LLC, 2018.
Den vollen Inhalt der Quelle findenWalker, Charles Rumford. Steel: The Diary of a Furnance Worker. Iron & Steel Society, 1999.
Den vollen Inhalt der Quelle findenDrane, John William. Fiery Furnance: A Time of Empires and Exile. Lion Hudson PLC, 1995.
Den vollen Inhalt der Quelle findenHayes, Diana, und Diana L. Hayes. Forged in the Fiery Furnance: African American Spirituality. Orbis Books, 2007.
Den vollen Inhalt der Quelle findenBuchteile zum Thema "Furnances"
Ross, C. Philip. „Glass Furnance Stack Gas Calculation Issues“. In 70th Conference on Glass Problems: Ceramic Engineering and Science Proceedings, Volume 31, Issue 1, 135–41. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2010. http://dx.doi.org/10.1002/9780470769843.ch14.
Der volle Inhalt der QuelleLi, Kuanhe, Shuchen Sun, Xiaoxiao Huang, Shuaidan Lu, Xiaoping Zhu und Ganfeng Tu. „One-Step Preparation of TIB2-C Composite Bydc Arc Furnance“. In TMS 2016: 145thAnnual Meeting & Exhibition: Supplemental Proceedings, 487–92. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2016. http://dx.doi.org/10.1002/9781119274896.ch59.
Der volle Inhalt der QuelleDi Bella, G., C. Paradiso, F. Corigliano, I. Arrigo und L. Mavilia. „An Alternative to Furnance Recycling in the Reuse of Aluminium Wastes“. In Sustainable Waste Management, 285–89. Thomas Telford Publishing, 2003. http://dx.doi.org/10.1680/swm.32514.0029.
Der volle Inhalt der QuelleKonferenzberichte zum Thema "Furnances"
Mikhailov, A. G., und P. A. Batrakov. „Experimental study of the radiative-convective heat transfer in complex shape furnances of the gas-tube boiler“. In 2016 Dynamics of Systems, Mechanisms and Machines (Dynamics). IEEE, 2016. http://dx.doi.org/10.1109/dynamics.2016.7819049.
Der volle Inhalt der QuelleRun, Huang, Long Wei und Pang Biao. „Development of Oversize Bogie-Hearth Resistance Furnance Computer Control System“. In 2009 International Forum on Information Technology and Applications (IFITA). IEEE, 2009. http://dx.doi.org/10.1109/ifita.2009.464.
Der volle Inhalt der QuelleLi, Kuanhe, Shuchen Sun, Xiaoxiao Huang, Shuaidan Lu, Xiaoping Zhu und Gangfeng Tu. „The preparation of TiB2 powder by carbothermal reaction using a DC electric arc furnance“. In 3rd International Conference on Material, Mechanical and Manufacturing Engineering (IC3ME 2015). Paris, France: Atlantis Press, 2015. http://dx.doi.org/10.2991/ic3me-15.2015.425.
Der volle Inhalt der QuelleMotorga, Roxana-Maria, Vlad Muresan, Mihail Abrudean, Honoriu Valean, Iulia Clitan, Mihaela Unguresan und Laurentiu Chifor. „Adaptive FOPID Controller with AI Techniques for the Driving Motors Driving the Furnance Hearth“. In 2022 10th International Conference on Control, Mechatronics and Automation (ICCMA). IEEE, 2022. http://dx.doi.org/10.1109/iccma56665.2022.10011614.
Der volle Inhalt der QuelleLin, D. C., C. Y. Kuo, T. S. Srivatsan und G. X. Wang. „Understanding Solidification Kinetics and Microstructural Development of a Lead-Free Composite Solder“. In ASME 2003 International Mechanical Engineering Congress and Exposition. ASMEDC, 2003. http://dx.doi.org/10.1115/imece2003-42544.
Der volle Inhalt der QuelleSaragi, Elfrida, und Moch Setiadji. „Temperature modeling for analysis and design of the sintering furnance in HTR fuel type of ball“. In PADJADJARAN INTERNATIONAL PHYSICS SYMPOSIUM 2013 (PIPS-2013): Contribution of Physics on Environmental and Energy Conservations. AIP, 2013. http://dx.doi.org/10.1063/1.4820311.
Der volle Inhalt der QuelleOrlowsky, Dirk, Christoph Witte und Bodo Lehmann. „Soil Investigation in an Area of a Disposal Site for Blast‐Furnance Slag Using Rayleigh Surface Waves“. In Symposium on the Application of Geophysics to Engineering and Environmental Problems 2001. Environment and Engineering Geophysical Society, 2001. http://dx.doi.org/10.4133/1.2922944.
Der volle Inhalt der QuelleOrlowsky, Dirk, Christoph Witte und Bodo Lehmann. „Soil Investigation In An Area Of A Disposal Site For Blast-Furnance Slag Using Rayleigh Surface Waves“. In 14th EEGS Symposium on the Application of Geophysics to Engineering and Environmental Problems. European Association of Geoscientists & Engineers, 2001. http://dx.doi.org/10.3997/2214-4609-pdb.192.ssi_2.
Der volle Inhalt der QuelleBerichte der Organisationen zum Thema "Furnances"
Sikka, V. (Design and installation of a 150-KW electron-beam furnance). [Design and Installation of a 150KW electron-beam furnace]. Office of Scientific and Technical Information (OSTI), April 1990. http://dx.doi.org/10.2172/7030418.
Der volle Inhalt der Quelle