Thematische Bibliographien / Frank loops

Inhaltsverzeichnis

  1. Zeitschriftenartikel
  2. Dissertationen
  3. Bücher
  4. Buchteile
  5. Konferenzberichte

Auswahl der wissenschaftlichen Literatur zum Thema „Frank loops“

Autor: Grafiati
Veröffentlicht am 14. Dezember 2024

Geben Sie eine Quelle nach APA, MLA, Chicago, Harvard und anderen Zitierweisen an

Wählen Sie eine Art der Quelle aus:

Machen Sie sich mit den Listen der aktuellen Artikel, Bücher, Dissertationen, Berichten und anderer wissenschaftlichen Quellen zum Thema "Frank loops" bekannt.

Neben jedem Werk im Literaturverzeichnis ist die Option "Zur Bibliographie hinzufügen" verfügbar. Nutzen Sie sie, wird Ihre bibliographische Angabe des gewählten Werkes nach der nötigen Zitierweise (APA, MLA, Harvard, Chicago, Vancouver usw.) automatisch gestaltet.

Sie können auch den vollen Text der wissenschaftlichen Publikation im PDF-Format herunterladen und eine Online-Annotation der Arbeit lesen, wenn die relevanten Parameter in den Metadaten verfügbar sind.

Zeitschriftenartikel zum Thema "Frank loops"

1

Suryanto. „Dislocation Generated by Electron Irradiation“. Advanced Materials Research 418-420 (Dezember 2011): 744–47. http://dx.doi.org/10.4028/www.scientific.net/amr.418-420.744.

Der volle Inhalt der Quelle
Annotation:
Dislocation loop was generated by electron irradiation in nickel aluminum alloy. It is important to know dislocation characteristics obtained from a high energetic electron irradiation. If b is the Burger vector of a dislocation loop and g is the diffraction vector, dislocation loop will appear larger, smaller or disappear for g.b>0, g.b<0 or g.b=0, respectively. Dislocation loop was determined as follows – first, the appearance of dislocation loops is arranged in observation table. Second, based on type of dislocation loop, Burger vector and diffraction vector, appearance of dislocation loop is arranged in calculation table. Third, based on observation and calculation table, Burger vector and type of dislocation loop is determined. The results show that dislocation loops consist of perfect dislocation loops and Frank dislocation loops. The perfect dislocation loops have Burger vectors of ½[0 ] and ½[ 0] while Frank dislocation loops have Burger vectors of ⅓[1 1], ⅓[11 ], ⅓[ 11], ⅓[111], ⅓[1 1], ⅓[11 ] and ⅓[ 11]. All dislocation loops are interstitial types.
APA, Harvard, Vancouver, ISO und andere Zitierweisen
2

Yang, Yunmin, Hiroaki Abe und Naoto Sekimura. „Behavior of Frank-loops under stress environment“. Physics Letters A 315, Nr. 3-4 (August 2003): 293–300. http://dx.doi.org/10.1016/s0375-9601(03)01016-8.

Der volle Inhalt der Quelle
APA, Harvard, Vancouver, ISO und andere Zitierweisen
3

Nogaret, T., C. Robertson und D. Rodney. „Atomic-scale plasticity in the presence of Frank loops“. Philosophical Magazine 87, Nr. 6 (21.02.2007): 945–66. http://dx.doi.org/10.1080/14786430601011497.

Der volle Inhalt der Quelle
APA, Harvard, Vancouver, ISO und andere Zitierweisen
4

Kondo, S., A. Kohyama und T. Hinoki. „Anisotropic evolution of Frank loops in ion-irradiated silicon carbide“. Journal of Nuclear Materials 367-370 (August 2007): 764–68. http://dx.doi.org/10.1016/j.jnucmat.2007.03.085.

Der volle Inhalt der Quelle
APA, Harvard, Vancouver, ISO und andere Zitierweisen
5

Chen, Y., X. Zhang und J. Wang. „Radiation Enhanced Absorption of Frank Loops by Nanovoids in Cu“. JOM 68, Nr. 1 (11.11.2015): 235–41. http://dx.doi.org/10.1007/s11837-015-1689-9.

Der volle Inhalt der Quelle
APA, Harvard, Vancouver, ISO und andere Zitierweisen
6

Jin, Miaomiao, Jilang Miao, Yongfeng Zhang, Marat Khafizov, Kaustubh K. Bawane, Boopathy Kombaiah, Yanwen Zhang und David H. Hurley. „Unfaulting mechanisms of interstitial Frank loops in fluorite-structured ThO2“. Scripta Materialia 237 (Dezember 2023): 115706. http://dx.doi.org/10.1016/j.scriptamat.2023.115706.

Der volle Inhalt der Quelle
APA, Harvard, Vancouver, ISO und andere Zitierweisen
7

Saka, H. „Defect fine Structures as observed by in situ experiments“. Proceedings, annual meeting, Electron Microscopy Society of America 48, Nr. 4 (August 1990): 458–59. http://dx.doi.org/10.1017/s0424820100175429.

Der volle Inhalt der Quelle
Annotation:
An in-situ experiment in an electron microscope is now a well established and useful technique in materials science. In this review recent contributions of in-situ experiments, especially of straining and heating experiments, to materials science will be high-lighted.The earlier works have been reviewed by Saka and Imura.It is believed that an external stress gives rise to an anistropy in the rate at which point defects are absorbed by edge dislocations; this mechanism is considered to explain the irradiation creep. A combined in situ tensile/irradiation experiment in a HVEM has been carried out to study effects of applied stress on the growth of dislocation loops. Fig. 1 shows typical microstructures of Ag irradiated at 403K for 10 min with 1MV electrons in the absence (a), and in the presence of an external stress of 5.5 kg/mm2 (b). Frank loops of interstial type, formed by electron irradiation, grew more rapidly in the direction of the external tensile stress than in the others. These results show that an external tensile stress has a profound effect on climb rates of Frank loops of interstitial type. However, detailed analysis of the results indicates that there is a considerable discrepancy between experiment and theory.
APA, Harvard, Vancouver, ISO und andere Zitierweisen
8

Wang, Huan Huan, Sha Yan Byrapa, F. Wu, Balaji Raghothamachar, Michael Dudley, Edward K. Sanchez, Darren M. Hansen, Roman Drachev, Stephan G. Mueller und Mark J. Loboda. „Basal Plane Dislocation Multiplication via the Hopping Frank-Read Source Mechanism and Observations of Prismatic Glide in 4H-SiC“. Materials Science Forum 717-720 (Mai 2012): 327–30. http://dx.doi.org/10.4028/www.scientific.net/msf.717-720.327.

Der volle Inhalt der Quelle
Annotation:
In this paper, we report on the synchrotron white beam topographic (SWBXT) observation of “hopping” Frank-Read sources in 4H-SiC. A detailed mechanism for this process is presented which involves threading edge dislocations experiencing a double deflection process involving overgrowth by a macrostep (MP) followed by impingement of that macrostep against a step moving in the opposite direction. These processes enable the single-ended Frank-Read sources created by the pinning of the deflected basal plane dislocation segments at the less mobile threading edge dislocation segments to “hop” from one slip plane to other parallel slip planes. We also report on the nucleation of 1/3< >{ } prismatic dislocation half-loops at the hollow cores of micropipes and their glide under thermal shear stress.
APA, Harvard, Vancouver, ISO und andere Zitierweisen
9

Idrissi, Hosni, Stuart Turner, Masatoshi Mitsuhara, Binjie Wang, Satoshi Hata, Michael Coulombier, Jean-Pierre Raskin, Thomas Pardoen, Gustaaf Van Tendeloo und Dominique Schryvers. „Point Defect Clusters and Dislocations in FIB Irradiated Nanocrystalline Aluminum Films: An Electron Tomography and Aberration-Corrected High-Resolution ADF-STEM Study“. Microscopy and Microanalysis 17, Nr. 6 (27.10.2011): 983–90. http://dx.doi.org/10.1017/s143192761101213x.

Der volle Inhalt der Quelle
Annotation:
AbstractFocused ion beam (FIB) induced damage in nanocrystalline Al thin films has been characterized using advanced transmission electron microscopy techniques. Electron tomography was used to analyze the three-dimensional distribution of point defect clusters induced by FIB milling, as well as their interaction with preexisting dislocations generated by internal stresses in the Al films. The atomic structure of interstitial Frank loops induced by irradiation, as well as the core structure of Frank dislocations, has been resolved with aberration-corrected high-resolution annular dark-field scanning TEM. The combination of both techniques constitutes a powerful tool for the study of the intrinsic structural properties of point defect clusters as well as the interaction of these defects with preexisting or deformation dislocations in irradiated bulk or nanostructured materials.
APA, Harvard, Vancouver, ISO und andere Zitierweisen
10

Pezoldt, Jörg, und Andrei Alexandrovich Kalnin. „Defects and Polytype Instabilities“. Materials Science Forum 924 (Juni 2018): 147–50. http://dx.doi.org/10.4028/www.scientific.net/msf.924.147.

Der volle Inhalt der Quelle
Annotation:
A model based on the generation and recombination of defect was developed to describe the stability of stacking faults and basal plane dislocation loops in crystals with layered polytype structures. The stability of the defects configuration was analysed for stacking faults surrounded by Shockley and Frank partial dislocation as well as Shockley dislocation dipoles with long range elastic fields. This approach allows the qualitative prediction of defect subsystems in polytype structure in external fields.
APA, Harvard, Vancouver, ISO und andere Zitierweisen
Mehr Quellen

Dissertationen zum Thema "Frank loops"

1

Huang, Wenwen Verfasser], Frank [Akademischer Betreuer] [Jülicher, Frank [Gutachter] Jülicher, Stephan [Gutachter] Grill und Nenad [Gutachter] Pavin. „Theoretical Study of Pulled Polymer Loops as a Model for Fission Yeast Chromosome / Wenwen Huang ; Gutachter: Frank Jülicher, Stephan Grill, Nenad Pavin ; Betreuer: Frank Jülicher“. Dresden : Saechsische Landesbibliothek- Staats- und Universitaetsbibliothek Dresden, 2018. http://d-nb.info/1151816914/34.

Der volle Inhalt der Quelle
APA, Harvard, Vancouver, ISO und andere Zitierweisen
2

Huang, Wenwen [Verfasser], Frank [Akademischer Betreuer] Jülicher, Frank [Gutachter] Jülicher, Stephan [Gutachter] Grill und Nenad [Gutachter] Pavin. „Theoretical Study of Pulled Polymer Loops as a Model for Fission Yeast Chromosome / Wenwen Huang ; Gutachter: Frank Jülicher, Stephan Grill, Nenad Pavin ; Betreuer: Frank Jülicher“. Dresden : Saechsische Landesbibliothek- Staats- und Universitaetsbibliothek Dresden, 2018. http://d-nb.info/1151816914/34.

Der volle Inhalt der Quelle
APA, Harvard, Vancouver, ISO und andere Zitierweisen
3

Baudouin, Jean-Baptiste. „Modeling and simulation with molecular dynamics of the edge dislocation behavior in the presence of Frank loops in austenitic stainless steels Fe-Ni-Cr“. Thesis, Lyon, INSA, 2014. http://www.theses.fr/2014ISAL0055/document.

Der volle Inhalt der Quelle
Annotation:
Les aciers inoxydables austénitiques sont très utilisés dans l’industrie nucléaire comme structure interne. Ces structures se retrouvent en grande majorité dans la cuve du réacteur et, du fait de leur proximité avec les assemblages combustibles, sont soumis à de rudes conditions d’utilisation. Ces éléments sont donc exposés à des doses d’irradiation élevées et peuvent atteindre 100 dpa après 40 ans d’utilisation, à une température proche de 350°C. Ces conditions d’utilisation modifient la microstructure de l’acier et son comportement mécanique, ce qui entraîne une dégradation de leurs propriétés mécaniques et de leur résistance à la corrosion. L’objectif de cette thèse est d’établir à l’échelle atomique une loi de comportement décrivant le déplacement d’une dislocation coin dans une solution solide Fe-Ni10-Cr20, d’apporter une compréhension des mécanismes d’interaction entre une dislocation coin et une boucle de Frank et d’investiguer l’effet de la température, du générateur aléatoire d’alliage, de l’orientation et du diamètre de la boucle sur la contrainte mécanique. Pour atteindre ces objectifs, des simulations en dynamique moléculaire sont réalisées, basées sur potentiel FeNiCr récemment développé pour imiter le comportement de l’acier austénitique inoxydable. Les simulations sont réalisées en conditions statiques, à 300 K, 600 K et 900 K et les interactions effectuées pour des tailles de boucle de Frank de 2 nm et 10 nm. nous proposons une loi de comportement où sont incluses la température et la vitesse de déformation; l’interaction entre la dislocation coin et la boucle de Frank révèle trois types de mécanismes d’interactions : le cisaillement simple, le défautement et l’absorption de la boucle. L’absorption est le mécanisme le plus stable ; Les analyses des propriétés mécaniques résultantes ont montré que le mécanisme de défautement requiert la contrainte la plus élevée pour que la dislocation franchisse l’obstacle. D’autre part, contrairement aux études précédentes, le défautement de la surface de la boucle n’a lieu que lorsque celle-ci entre en contact avec la dislocation coin ; dans le cas de la boucle de Frank de 2 nm, la corrélation entre la probabilité du mécanisme d’interaction et la force moyenne de l’obstacle constitue des données utiles pour les simulations en Dynamique des Dislocations. Les observations des configurations résultantes de la boucle de Frank suite à l’interaction avec la dislocation permettent de justifier l’apparition de bandes claires observées au MET. Ce travail a été partiellement soutenu par la Commission européenne FP7 par le numéro de subvention 232612 dans le cadre du projet PERFORM 60
Austenitic stainless steels are widely used in the nuclear industry as internals. These structures reside mainly in the reactor vessel and, due to their proximity with fuel assemblies, are subjected to severe operating conditions. These elements are exposed to high irradiation doses which can reach 100 dpa after 40 years of operating, at a temperature close to 350°C. These operating conditions affect the microstructure of steels and their mechanical behavior, which leads to the deterioration of their mechanical properties and their corrosion resistance. The objective of this PhD research work is to establish at the atomic scale a constitutive law describing the edge dislocation motion in a random Fe-Ni10-Cr20 solid solute solution, to bring a comprehensive understanding of the interaction mechanism between the edge dislocation and the Frank loops and to investigate the effect of temperature, alloying random generator, orientation and size of the Frank loop on the mechanical stress. To achieve these objectives, molecular dynamics simulations were conducted with a recently developed FeNiCr potential used to mimic the behavior of austenitic stainless steels. These simulations have been performed in static conditions as well as at 300 K, 600 K and 900 K and the interactions realized for loop sizes of 2nm and 10nm. A constitutive law taking into account the temperature and strain rate is proposed; the interaction between the edge dislocation and the Frank loop revealed 3 kinds of interaction mechanisms: simple shearing, unfaulting and absorption of the loop. Absorption is the most stable mechanism; the analyses of the resulting mechanical properties have shown that the unfaulting mechanism requires the highest stress to make the dislocation overcome the obstacle. On the other hand, contrary to previous studies, the unfaulting of the loop surface occurs only when the dislocation comes into contact with the edge dislocation; for the 2 nm Frank loop size, the coupling between the probability of the outcome of the reaction and the average strength of the obstacle constitutes useful data for Dislocation Dynamics simulations. The observations of the resulting Frank loop configurations following the interaction with the dislocation allow justifying the emergence of clear bands observed in TEM. This work has been partially supported by the European Commission FP7 with the grant number 232612 as part of the PERFORM 60 project
APA, Harvard, Vancouver, ISO und andere Zitierweisen
4

Dujarrier, Alexis. „Effet de la micrοstructure οbtenue par fabricatiοn additive sur le vieillissement sοus irradiatiοn d'alliages ΝΙ-20CR“. Electronic Thesis or Diss., Normandie, 2024. http://www.theses.fr/2024NORMC231.

Der volle Inhalt der Quelle
Annotation:
La fabrication additive (FA) des métaux est une technologie de pointe qui permet une mise en œuvre rapide et l’optimisation de la conception de pièces complexes. Elle est désormais utilisée dans de nombreux secteurs industriels, dont le nucléaire. L’un des processus de fabrication les plus courants est la fusion laser sur lit de poudre, qui est à l’origine d’une microstructure particulière qui pourrait influer sur la réponse du matériau à l’irradiation. L’objectif de ce travail de thèse a donc été d’étudier l’effet de l’irradiation aux ions lourds sur la microstructure du Ni-20Cr FA par Microscopie Électronique en Transmission (MET), ainsi que son impact sur ses propriétés mécaniques, afin de déterminer si l’usage de la FA pourrait s’appliquer au domaine nucléaire. Pour cela, trois stratégies de fabrication additive ainsi que l’effet d’un recuit ont été étudiés et ont été comparés à un matériau de référence. Différentes expériences d’irradiation aux ions lourds ont été réalisées, sur des échantillons massifs mais aussi sur des lames minces observées par MET in situ. Les expériences in situ permettent notamment de mesurer la cinétique de croissance des défauts à faible dose et de suivre l’évolution de certaines caractéristiques. Il est ainsi mis en évidence que dans tous les échantillons, l’irradiation induit la formation de boucles de Frank et de boucles parfaites. La stratégie de fabrication n’a pas d’influence sur l’évolution microstructurale des échantillons FA. Cependant, les cellules dendritiques, caractéristiques de la FA, sont dissoutes par irradiation. De plus, une densité plus faible de boucles de dislocation est mesurée dans le cas des échantillons FA que pour les échantillons recuits et de référence, qui présentent eux une évolution similaire. Cela est expliqué par une densité de puits de défauts plus importante dans le matériau FA brut. L’évolution microstructurale observée est reliée aux propriétés mécaniques, qui sont mesurées par compression micro-pilier. Il est démontré que les matériaux recuits et de référence voient leur cission critique résolue augmenter à cause de la création des boucles de dislocation, alors que le matériau FA voit une diminution suite à la dissolution des cellules de dislocation, plus important que la composante durcissante. Ces évolutions sont confirmées par l’application du modèle de durcissement par barrières dispersées
Additive Manufacturing (AM) of metals is an advanced technology that enables rapid implementation and design optimization of complex parts. It is now used in many industrial sectors, including nuclear. One of the most common processes in AM is Laser Powder Bed Fusion, which results in a particular microstructure that could influence the material's response to irradiation. The objective of this thesis was to study the effect of heavy ion irradiation on the microstructure of AM Ni-20Cr using Transmission Electron Microscopy (TEM), as well as its impact on its mechanical properties, to determine whether AM could be used for nuclear applications. For this purpose, three additive manufacturing strategies and the effect of annealing were studied and compared to a reference material. Various heavy ion irradiation experiments were conducted, on bulk samples as well as on thin foils observed via in situ TEM. In situ experiments allow measuring the defect growth kinetics at low doses and tracking the evolution of certain characteristics.It is thus demonstrated that in all samples, irradiation induces the formation of Frank loops and perfect loops. The manufacturing strategy does not influence the microstructure evolution of AM samples. However, the dendritic cells, characteristic of AM, are dissolved under irradiation. Additionally, a lower density of dislocation loops is measured in the AM samples compared to the annealed and reference samples that show a similar evolution. This is explained by a higher density of defect sinks in the as built AM material. The observed microstructural evolution is linked to the mechanical properties, which are measured by micropillar compression. It is shown that the annealed and reference materials experience an increase in their critical resolved shear stress due to the creation of dislocation loops, whereas the AM material show a decrease due to the dissolution of dislocation cells, superior to the hardening component. These changes are confirmed by the application of the dispersed barrier-hardening model
APA, Harvard, Vancouver, ISO und andere Zitierweisen
5

Masone, Carlo [Verfasser], und Frank [Akademischer Betreuer] Allgöwer. „Planning and control for robotic tasks with a human-in-the-loop / Carlo Masone. Betreuer: Frank Allgöwer“. Stuttgart : Universitätsbibliothek der Universität Stuttgart, 2014. http://d-nb.info/106333554X/34.

Der volle Inhalt der Quelle
APA, Harvard, Vancouver, ISO und andere Zitierweisen
6

Clever, Geoffrey Alan. „Adolf Loos, Franz Kafka and the Wall as an architectural element of modernism“. Thesis, Georgia Institute of Technology, 1990. http://hdl.handle.net/1853/23334.

Der volle Inhalt der Quelle
APA, Harvard, Vancouver, ISO und andere Zitierweisen
7

Reittererová, Vlasta. „Religiosität, Märchen, Sage bei tschechischen Komponisten: einige Bemerkungen zum Beitrag von Helmut Loos“. Internationale Arbeitsgemeinschaft für die Musikgeschichte in Mittel- und Osteuropa an der Universität Leipzig, 2008. https://ul.qucosa.de/id/qucosa%3A16026.

Der volle Inhalt der Quelle
Annotation:
Wie die tschechische Historiographie überhaupt, so ist auch die tschechische Musikhistoriographie lange Zeit von Stereotypen beherrscht worden, die mit wissenschaftlicher Objektivität wenig zu tun hatten. Daher ist jeder Blick 'von außen' notwendig und willkommen, weil er uns auf die Klischees, aber auch die Lücken in unserer tschechischen Musikgeschichte nicht nur hinweist, sondern uns auch, wie Helmut Loos es in seinem Artikel 'Religiosität bei Smetana und Dvořák' getan hat, dazu veranlasst, unsere Standpunkte unter neuen Fragestellungen zu überdenken.
APA, Harvard, Vancouver, ISO und andere Zitierweisen
8

Merkl, Ralf [Verfasser], Jörg [Akademischer Betreuer] Franke, Jörg [Gutachter] Franke, Christian [Gutachter] Rehtanz, Dirk [Gutachter] Westermann, Jörg [Herausgeber] Franke, Nico [Herausgeber] Hanenkamp, Marion [Herausgeber] Merklein, Michael [Herausgeber] Schmidt und Sandro [Herausgeber] Wartzack. „Closed-Loop Control of a Storage-Supported Hybrid Compensation System for Improving the Power Quality in Medium Voltage Networks / Ralf Merkl ; Gutachter: Jörg Franke, Christian Rehtanz, Dirk Westermann ; Betreuer: Jörg Franke ; Herausgeber: Jörg Franke, Nico Hanenkamp, Marion Merklein, Michael Schmidt, Sandro Wartzack“. Erlangen : FAU University Press, 2021. http://d-nb.info/1229194266/34.

Der volle Inhalt der Quelle
APA, Harvard, Vancouver, ISO und andere Zitierweisen
9

Stöcklein, Jörg [Verfasser], Franz Josef [Akademischer Betreuer] Rammig und Volker [Akademischer Betreuer] Paelke. „Mixed reality in the loop : ein iteratives, prototypenbasiertes Entwurfsvorgehen für die Entwicklung von Mixed Reality Anwendungen / Jörg Stöcklein. Betreuer: Franz Josef Rammig ; Volker Paelke“. Paderborn : Universitätsbibliothek, 2011. http://d-nb.info/1033765295/34.

Der volle Inhalt der Quelle
APA, Harvard, Vancouver, ISO und andere Zitierweisen
10

Gregory, Shaun David. „Inflow cannula design for biventricular assist devices“. Thesis, Queensland University of Technology, 2013. https://eprints.qut.edu.au/61610/1/Shaun_Gregory_Thesis.pdf.

Der volle Inhalt der Quelle
Annotation:
Cardiovascular diseases are a leading cause of death throughout the developed world. With the demand for donor hearts far exceeding the supply, a bridge-to-transplant or permanent solution is required. This is currently achieved with ventricular assist devices (VADs), which can be used to assist the left ventricle (LVAD), right ventricle (RVAD), or both ventricles simultaneously (BiVAD). Earlier generation VADs were large, volume-displacement devices designed for temporary support until a donor heart was found. The latest generation of VADs use rotary blood pump technology which improves device lifetime and the quality of life for end stage heart failure patients. VADs are connected to the heart and greater vessels of the patient through specially designed tubes called cannulae. The inflow cannulae, which supply blood to the VAD, are usually attached to the left atrium or ventricle for LVAD support, and the right atrium or ventricle for RVAD support. Few studies have characterized the haemodynamic difference between the two cannulation sites, particularly with respect to rotary RVAD support. Inflow cannulae are usually made of metal or a semi-rigid polymer to prevent collapse with negative pressures. However suction, and subsequent collapse, of the cannulated heart chamber can be a frequent occurrence, particularly with the relatively preload insensitive rotary blood pumps. Suction events may be associated with endocardial damage, pump flow stoppages and ventricular arrhythmias. While several VAD control strategies are under development, these usually rely on potentially inaccurate sensors or somewhat unreliable inferred data to estimate preload. Fixation of the inflow cannula is usually achieved through suturing the cannula, often via a felt sewing ring, to the cannulated chamber. This technique extends the time on cardiopulmonary bypass which is associated with several postoperative complications. The overall objective of this thesis was to improve the placement and design of rotary LVAD and RVAD inflow cannulae to achieve enhanced haemodynamic performance, reduced incidence of suction events, reduced levels of postoperative bleeding and a faster implantation procedure. Specific objectives were: * in-vitro evaluation of LVAD and RVAD inflow cannula placement, * design and in-vitro evaluation of a passive mechanism to reduce the potential for heart chamber suction, * design and in-vitro evaluation of a novel suture-less cannula fixation device. In order to complete in-vitro evaluation of VAD inflow cannulae, a mock circulation loop (MCL) was developed to accurately replicate the haemodynamics in the human systemic and pulmonary circulations. Validation of the MCL’s haemodynamic performance, including the form and magnitude of pressure, flow and volume traces was completed through comparisons of patient data and the literature. The MCL was capable of reproducing almost any healthy or pathological condition, and provided a useful tool to evaluate VAD cannulation and other cardiovascular devices. The MCL was used to evaluate inflow cannula placement for rotary VAD support. Left and right atrial and ventricular cannulation sites were evaluated under conditions of mild and severe heart failure. With a view to long term LVAD support in the severe left heart failure condition, left ventricular inflow cannulation was preferred due to improved LVAD efficiency and reduced potential for thrombus formation. In the mild left heart failure condition, left atrial cannulation was preferred to provide an improved platform for myocardial recovery. Similar trends were observed with RVAD support, however to a lesser degree due to a smaller difference in right atrial and ventricular pressures. A compliant inflow cannula to prevent suction events was then developed and evaluated in the MCL. As rotary LVAD or RVAD preload was reduced, suction events occurred in all instances with a rigid inflow cannula. Addition of the compliant segment eliminated suction events in all instances. This was due to passive restriction of the compliant segment as preload dropped, thus increasing the VAD circuit resistance and decreasing the VAD flow rate. Therefore, the compliant inflow cannula acted as a passive flow control / anti-suction system in LVAD and RVAD support. A novel suture-less inflow cannula fixation device was then developed to reduce implantation time and postoperative bleeding. The fixation device was evaluated for LVAD and RVAD support in cadaveric animal and human hearts attached to a MCL. LVAD inflow cannulation was achieved in under two minutes with the suture-less fixation device. No leakage through the suture-less fixation device – myocardial interface was noted. Continued development and in-vivo evaluation of this device may result in an improved inflow cannulation technique with the potential for off-bypass insertion. Continued development of this research, in particular the compliant inflow cannula and suture-less inflow cannulation device, will result in improved postoperative outcomes, life span and quality of life for end-stage heart failure patients.
APA, Harvard, Vancouver, ISO und andere Zitierweisen

Bücher zum Thema "Frank loops"

1

Pueblo of Zuni Arts & Crafts. und A:Shiwi A:wan Museum and Heritage Center., Hrsg. A Zuni artist looks at Frank Hamilton Cushing: Cartoons by Phil Hughte. Zuni, NM: Pueblo of Zuni Arts & Crafts, 1994.

Den vollen Inhalt der Quelle finden
APA, Harvard, Vancouver, ISO und andere Zitierweisen
2

1953-, Fraziano Giovanni, Hrsg. La casa isolata: Dalla tautologia alla banalità : letture, trascrizioni, variazioni su testi di Wittgenstein, Loos, Frank. Venezia: Cluva, 1989.

Den vollen Inhalt der Quelle finden
APA, Harvard, Vancouver, ISO und andere Zitierweisen
3

Lueger, Magdalena. Wien um 1900: Josef Frank, Josef Hoffmann, Gustav Klimt, Adolf Loos, Kolomann Moser, Joseph Maria Olbrich, Egon Schiele, Otto Wagner. [Wien]: Metroverlag, 2013.

Den vollen Inhalt der Quelle finden
APA, Harvard, Vancouver, ISO und andere Zitierweisen
4

Noorman, Judith. Art, Honor and Success in The Dutch Republic. NL Amsterdam: Amsterdam University Press, 2020. http://dx.doi.org/10.5117/9789462987982.

Der volle Inhalt der Quelle
Annotation:
Focusing on the interrelationship between Jacob van Loo's art, honor, and career, this book argues that Van Loo's lifelong success and unblemished reputation were by no means incompatible, as art historians have long assumed, with his specialization in painting nudes and his conviction for manslaughter. Van Loo's iconographic specialty - the nude - allowed his clientele to present themselves as judges of beauty and display their mastery of decorum, while his portraiture perfectly expressed his clients' social and political ambitions. Van Loo's honor explains why his success lasted a lifetime, whereas that of Rembrandt, Frans Hals, and Vermeer did not. Taking an interdisciplinary approach, this book reinterprets the manslaughter case as a sign that Van Loo's elite patrons recognized him as a gentleman and highly-esteemed artist.
APA, Harvard, Vancouver, ISO und andere Zitierweisen
5

Helle Panke zur Förderung von Politik, Bildung und Kultur, Hrsg. Berlin-Wien, eine Kulturbrücke: Zum Wirken von Vicki Baum, Walter Benjamin, Mihai Eminescu, Herbert Ihering, Karl Kraus, Adolf Loos, Heinrich Mann, Franz Mehring, Arnold Schönberg u.a. in beiden Metropolen. Berlin: Helle Panke, 2007.

Den vollen Inhalt der Quelle finden
APA, Harvard, Vancouver, ISO und andere Zitierweisen
6

Hughte, Phil. A Zuni Artist Looks at Frank Hamilton Cushing. Zuni A:Shiwi Publishing, 1994.

Den vollen Inhalt der Quelle finden
APA, Harvard, Vancouver, ISO und andere Zitierweisen
7

Feigenblatt, Hazel. Governance Indicators and the Broken Feedback Loop. Oxford University Press, 2018. http://dx.doi.org/10.1093/oso/9780198817062.003.0010.

Der volle Inhalt der Quelle
Annotation:
This chapter presents an overview of the role of communications in governance indicators and discusses challenges to understanding whether, how, and why their intended audiences use or fail to use rankings, indices, and related data. These include long-standing challenges associated with ensuring that information meets the needs of different target audiences, engaging with traditional media, and using rankings to present indicators. As new technologies have changed information flows and dynamics, new challenges have emerged, including echo chambers and data graveyards. The chapter shows a broken feedback loop between governance indicator creators and their intended users that can be traced to the understanding of communications as an accessory activity, without integrating user research and frank self-assessments into the indicator creation cycle. More research should be conducted about the extent to which the current offer of indicators is meeting users’ needs and the extent to which underlying theories of change remain valid.
APA, Harvard, Vancouver, ISO und andere Zitierweisen
8

Hombach, Bodo, und Frank Richter, Hrsg. Auf Streife durchs Revier. Tectum – ein Verlag in der Nomos Verlagsgesellschaft, 2022. http://dx.doi.org/10.5771/9783828878594.

Der volle Inhalt der Quelle
Annotation:
If one looks at the development of crime and criminality, it is always also a piece of contemporary history and milieu study. This anthology looks at the consequences of these phenomena in the Ruhr region. What factors influence the (non)sense of security of people living in the metropolitan region? What crimes have shaken and scarred the area? And how does crime affect society? In this volume, intelligent perspectives from science, politics, business and the police provide a new look at the topic of security in the Ruhr region. With contributions by Stefan Berger, Jörg Bogumil, Dorothee Dienstbühl, Klaus Engel, Dorthe Flothmann, Bernhard Frevel, Ralph Ghadban, Peter Henning, Bodo Hombach, Frank Kawelovski, Janet Kursawe, Herbert Reul, Frank Richter, Karsten Rudolph, Christoph Schwennicke, Patricia Scicolone and Jan Zweyer.
APA, Harvard, Vancouver, ISO und andere Zitierweisen
9

Gadd, Mel. Masturbation, Autism and Learning Disabilities. Jessica Kingsley Publishers, 2021. http://dx.doi.org/10.5040/9781805015697.

Der volle Inhalt der Quelle
Annotation:
Intimate self-touch and masturbation can pose many difficulties for people with learning disabilities and/or on the autistic spectrum, particularly when it happens in public settings. This frank and thorough guide looks at societal, cultural and religious views of masturbation, how teens develop into sexual beings, the right to be sexual, how to masturbate, appropriate public and private behaviour, professional responsibilities and boundaries, and legal aspects of this topic. It also contains good practice responses providing examples of the issues and solutions in action.
APA, Harvard, Vancouver, ISO und andere Zitierweisen
10

Hunter, Adrian. Novel, Novella, Short Story. Oxford University Press, 2018. http://dx.doi.org/10.1093/oso/9780198749394.003.0018.

Der volle Inhalt der Quelle
Annotation:
This chapter considers shorter forms of fiction. It looks at some prominent arguments on the case for brevity and the modern subject. Some commentators such as Frank O’Connor, H. E. Bates, and Elizabeth Bowen — all fine practitioners of the short story and its most astute critics at mid-century — suggested that short forms, by dint of their shortness, had a unique capacity to represent the lived condition of modernity. All these commentators appear to argue the same thing: that short stories are better adapted to the cultural moment of technological modernity than are long ones. They also predict great things for them.
APA, Harvard, Vancouver, ISO und andere Zitierweisen
Mehr Quellen

Buchteile zum Thema "Frank loops"

1

Cotler, Jordan. „What the World Looks Like Upside Down“. In Frank Wilczek, 71–76. WORLD SCIENTIFIC, 2022. http://dx.doi.org/10.1142/9789811251948_0006.

Der volle Inhalt der Quelle
APA, Harvard, Vancouver, ISO und andere Zitierweisen
2

„Frank McCourt Looks for Ghosts“. In In So Many More Words, 216–18. University of Notre Dame Press, 2010. http://dx.doi.org/10.2307/j.ctv19m61z3.42.

Der volle Inhalt der Quelle
APA, Harvard, Vancouver, ISO und andere Zitierweisen
3

„Fassbinder, Franz, Fox, Elvira, Erwin, Annin, and All the Othen“. In Queer Looks, 273–80. Routledge, 2013. http://dx.doi.org/10.4324/9781315021508-31.

Der volle Inhalt der Quelle
APA, Harvard, Vancouver, ISO und andere Zitierweisen
4

Cardinal, Rene, und Pierre L. Page. „Neuronal Modulation of Atrial and Ventricular Electrical Properties“. In Basic and Clinical Neurocardiology, 315–39. Oxford University PressNew York, NY, 2004. http://dx.doi.org/10.1093/oso/9780195141290.003.0011.

Der volle Inhalt der Quelle
Annotation:
Abstract As reviewed in Chapter 4, anatomically and functionally complex neuronal aggregates that are involved in coordinating regional cardiac function exist in intrathoracic extracardiac as well as intrinsic cardiac ganglia. It has been proposed that the intrinsic cardiac nervous system represents the final common pathway for the control of regional cardiac function. This system integrates afferent neuronal information arising from the heart to exert spatial and temporal control over cardiac efferent neurons regulating different cardiac regions. As such, it forms part of a hierarchy of intrathoracic and central neuronal feedback loops involved in regulating regional cardiac dynamics.6 In this scheme, neurons located in the various intrinsic cardiac ganglionated plexuses play a major role in beat­ to-beat regulation of regional cardiac function, a role that has traditionally been minimized to the benefit of local mechanical interactions (the Frank-Starling hypothesis). One outstanding issue in the field of neurocardiology concerns the patterns of efferent neuronal projections to various cardiac regions arising from the different ganglionated plexuses located in divergent atrial and ventricular regions. At present, this is a subject of considerable controversy. Some authors believe that neurons in the right atrial ganglionated plexus, for instance, subserve solely sinus nodal function whereas those in the inferior vena cavalinferior left ventricular ganglionated plexus exert predominant control over the atrioventricular node. In contrast, it has been our contention that the multiple neurons existing within a given ganglionated plexus modulate divergent car­ diac regions while displaying preferential control over regional cardiac function.
APA, Harvard, Vancouver, ISO und andere Zitierweisen
5

Andersson, Rani-Henrik, und Rainer Smedman. „Socialist Visions of American Dreams: The Finnish Settler Lives of Oskari Tokoi and Frank Aaltonen“. In Finnish Settler Colonialism in North America: Rethinking Finnish Experiences in Transnational Spaces, 153–79. Helsinki University Press, 2022. http://dx.doi.org/10.33134/ahead-2-7.

Der volle Inhalt der Quelle
Annotation:
This chapter provides a window to settler colonialism through the political activities and perceptions of two Finnish socialists of Oskari Tokoi and Frank Aaltonen. It looks at how Tokoi and Aaltonen built their identities through movement in transnational frameworks, their relationship to land and Indigenous peoples, and understanding of settler rights. Oskari Tokoi and Frank Aaltonen espoused the idea of Finnish exceptionalism and that the Finns had a share in the American Dream.
APA, Harvard, Vancouver, ISO und andere Zitierweisen
6

Ahlskog, J. Eric. „Prognosis“. In The Parkinson’s Disease Treatment Book, 48–54. Oxford University PressNew York, NY, 2005. http://dx.doi.org/10.1093/oso/9780195171938.003.0005.

Der volle Inhalt der Quelle
Annotation:
Abstract Initially being told that you have Parkinson’s disease (PD) can be devastating. Often the first thing that comes to mind is an image of a relative or an acquaintance with terrible, end-stage problems. We tend to remember worst- case scenarios. Hearing Parkinson’s disease may evoke a mental image of Uncle Frank with PD, who was in a wheelchair and died in a nursing home. However, someone in the workplace, still leading a full life after ten years of PD, may be forgotten. Furthermore, Uncle Frank may not have had PD but a disorder that only looks like PD, or possibly his course was complicated by a stroke. Also, Uncle Frank may have developed PD before effective medications became available.
APA, Harvard, Vancouver, ISO und andere Zitierweisen
7

Ajab Amin, Aloysius. „The CFA Franc“. In The Oxford Handbook of the Economy of Cameroon, 513–26. Oxford University Press, 2023. http://dx.doi.org/10.1093/oxfordhb/9780192848529.013.33.

Der volle Inhalt der Quelle
Annotation:
Abstract The chapter briefly traces the evolution of the Franc CFA Zone- a monetary union, which is one of the world’s longest surviving currency arrangement. It examines the implication of the four main principles of the monetary arrangements with the advantages and costs. It looks at the membership in CEMAC especially on how the agreement has impacted the financial sector and consequently CEMAC’s economy. The CEMAC’s economy is oil dominated and oil price shocks influence the region’s economic performance. The impact is seen in region’s limited intraregional trade, weak financial development and low private sector financing. The chapter, therefore, assesses the financial sector of the zone, and analyses the role of financial sector on the growth of the private sector and economic expansion. The results of the estimated model show the importance of the financial sector to the private sector. The chapter concludes that the weak financial sector/system of the CFA franc zone has hindered the economic expansion because of the limited private sector financing. Hence, economic diversification and financial development is essential in the regional economic expansion.
APA, Harvard, Vancouver, ISO und andere Zitierweisen
8

LaCapra, Dominick. „Frank Hamilton Cushing and His “Adventures” at Zuni“. In Understanding Others, 115–29. Cornell University Press, 2018. http://dx.doi.org/10.7591/cornell/9781501724893.003.0005.

Der volle Inhalt der Quelle
Annotation:
The chapter looks into the relations between Cushing and the Zuni, notably as portrayed in the sketches in the recent Zuni artist Phil Hughte. Zuni and other tribes remain divided over the role of Cushing at Zuni, often seeing either intrusive betrayal or attempted empathic understanding in it. Hughte indicates, often humorously or ironically, that typically these relations took place in mutual blindness but nonetheless also points to their more positive dimensions.
APA, Harvard, Vancouver, ISO und andere Zitierweisen
9

Kramer, Rutger. „Franks, Romans, and Countrymen“. In Empires and Communities in the Post-Roman and Islamic World, C. 400-1000 CE, 253–82. Oxford University Press, 2021. http://dx.doi.org/10.1093/oso/9780190067946.003.0010.

Der volle Inhalt der Quelle
Annotation:
This chapter is essentially a case study that brings together the themes of law and identity, resilience and adaptation, empire, and ethnicity, highlighted in chapter 9. It zooms in on the various mechanisms employed to integrate the semi-independent polity of Aquitaine into the emerging Carolingian realm—and to deal with their significance in the sources composed in retrospect. Based around the “official” absorption of the duchy in 767/8, the chapter looks at the various modes of identification not only employed by the Aquitanians themselves but also visible within Carolingian chronicles, capitularies, and hagiographical narratives as they tried to make sense of this region, which was rich in Roman history but with a population that remained aware of its Visigothic and Basque roots as well.
APA, Harvard, Vancouver, ISO und andere Zitierweisen
10

Dyson, Kenneth. „Patron Saints: (3) Theological Foundations of Ordo and Religious Traces“. In Conservative Liberalism, Ordo-liberalism, and the State, 210–38. Oxford University Press, 2020. http://dx.doi.org/10.1093/oso/9780198854289.003.0008.

Der volle Inhalt der Quelle
Annotation:
This chapter examines the role of religion and theological debate in conservative liberalism and Ordo-liberalism. It looks at the ethical and strategic roles of religion: for Walter Eucken, Lutheran faith should act as a guide; for Friedrich Hayek, an agnostic, religion had instrumental value in gathering support. The central reference point of Ordo-liberalism was in Lutheran thought and Reformed Protestantism; their cross-national reach; the ascetic and austere moral seriousness they imparted to debates about civic virtue and the just economic order; and the effect on their attitudes to John Maynard Keynes and Joseph Schumpeter. The chapter shows how this link played a key role in the Freiburg resistance circles to the Third Reich; the work by Franz Böhm, Eucken, and others on the Bonhoeffer Memorandum; and the secularized Calvinism of James Buchanan and Frank Knight. The chapter also explores the complex and difficult relationship to Roman Catholic Scholastic thought, notably the concept of Ordo; to Catholic social thought as it evolved from the late nineteenth century, notably about social solidarity; and to Classical humanism, as represented by Stoicism; and the relatively late development of Lutheran social ethics. The challenge of building bridges to Catholicism has been a persistent concern, notably in the writings of Wilhelm Röpke. The chapter also looks at Catholic theologians who have engaged with Ordo-liberalism; the appeal of ‘thinking in orders’ within Catholicism; and successive relevant papal encyclicals. The chapter closes with reflections on the contemporary relevance of religion and its role in upholding the values of conservative liberalism and Ordo-liberalism.
APA, Harvard, Vancouver, ISO und andere Zitierweisen

Konferenzberichte zum Thema "Frank loops"

1

Wang, Qiang, Cong Dai, Travis Skippon, Amy Fluke, Hui Yuan, Fei Long und Mark R. Daymond. „Microstructural and Mechanical Evolution of High Temperature Proton Irradiated FeCrMnNi Concentrated Solid-Solution Alloy“. In AM-EPRI 2024, 1149–60. ASM International, 2024. http://dx.doi.org/10.31399/asm.cp.am-epri-2024p1149.

Der volle Inhalt der Quelle
Annotation:
Abstract A FeCrMnNi concentrated solid-solution alloy was irradiated with a 2 MeV proton beam up to 1 dpa and 6 dpa at temperatures of 400 °C and 600 °C. The microstructural changes induced by irradiation were characterized using Transmission Electron Microscopy (TEM). In samples irradiated at 400 °C, Frank loops were the predominant form of lattice damage at 1 dpa, whereas small defect clusters were more prevalent at 6 dpa. For the sample irradiated to 1 dpa at 600 °C, both Frank loops and small defect clusters were present in similar density. Nanoindentation was employed to assess the changes in mechanical properties (hardness) post-irradiation, revealing significant hardening in all irradiated samples. The results indicated that the hardening effect began to saturate at 1 dpa or earlier. Additionally, nanoindentation creep tests with a 1200-second dwell period produced stress exponents comparable to those obtained from conventional creep testing. The findings suggest a shift in the deformation mechanism from dislocation glide to dislocation climb in the sample irradiated to 6 dpa at 400 °C.
APA, Harvard, Vancouver, ISO und andere Zitierweisen
2

Macodiyo, Dan O., Hitoshi Soyama und Kazuo Hayashi. „Characterization of Defects for Effective Gettering in Silicon Wafer and Polysilicon Thin Films“. In ASME 8th Biennial Conference on Engineering Systems Design and Analysis. ASMEDC, 2006. http://dx.doi.org/10.1115/esda2006-95340.

Der volle Inhalt der Quelle
Annotation:
The scaling down of commercial products has fueled the rapid development of micro- and nano-electromechanical systems (MEMS/NEMS). The enabling technologies of surface micromachining for silicon has made it compatible with industry strategies towards integrated circuits used in actuation and controls of systems. During the silicon processing, microdefects do occur. If properly controlled, they act as gettering sites for metallic species and hence remove unwanted impurities in the active device regions of semiconductor devices. On the other hand, microdefects can be responsible for plastic deformation of silicon wafer. The occurrence of dislocations in the active device regions causes current leakage and even failure of devices. Determination of the optimum point at which bulk microdefects can be considered to have beneficial gettering effect in silicon wafer and the exact mechanisms by which mobile dislocations are generated in the bulk of an initially dislocation free silicon wafer are not well understood. The purpose of this study is to analyze types of dislocation misfits and the corresponding defect size that is responsible for effective gettering due to cavitation impacts. The authors have already studied electrical characteristics of backside damage gettering by cavitation impact [1–3]. Polysilicon has been grown on thin silicon suboxide layer by a gas-source molecular beam epitaxy (MBE). MBE was done by placing the silicon substrate in an ultra-high vacuum chamber and heating it to 800 °C for 10 min and then at 700 °C for 3 hours at a flow rate of 2.5 sccm. The atomic force microscopy (AFM), micro Raman spectroscopy and transmission electron microscopy (TEM) were used to characterize the Czochralski silicon (CZ–Si) in the plane (100) and poly-Si/SiO2 in the atomic scale before and after gettering the specimen. AFM results showed that the surface roughness and threshold deformation were 2.3 nm and 4.4 nm, respectively. Plan-view TEM analysis of silicon showed the coexistence of single dislocation and narrow dipoles. It can be concluded that cavitation impacts causes dislocation dipoles on CZ-Si(100) which are associated with dislocation loops. The initiation point takes the form of a micro Frank-Read dislocation source, less than 50 nm, that cause dislocation dipoles which are associated with dislocation loops. Plan view TEM observations reveal that the size of the dislocation misfits was approximately 100 nm. The polysilicon surface had a higher residual stresses when it was subjected to cavitation impacts. The cross-sectional TEM observation on poly-Si revealed random crystals on the noncavitated specimens while a mixer of columnar-textured grains on the specimen treated by cavitation. The textured grains have rough edges and the intra-grain size is about 40 nm. Deformation twins and set of streaks from an array of dislocations were observed in the cavitated poly-Si/SiO2 specimens. The spacing between the large grains was 8 nm.
APA, Harvard, Vancouver, ISO und andere Zitierweisen
3

Gregory, S. D., M. Stevens, D. Timms und M. Pearcy. „Replication of the Frank-Starling response in a mock circulation loop“. In 2011 33rd Annual International Conference of the IEEE Engineering in Medicine and Biology Society. IEEE, 2011. http://dx.doi.org/10.1109/iembs.2011.6091683.

Der volle Inhalt der Quelle
APA, Harvard, Vancouver, ISO und andere Zitierweisen
4

Chen, Zheng, Leslie Cargill und Brent Naizer. „Auto-Tuning Tub-Level Control of Blender in Hydraulic Fracturing“. In ASME 2016 Dynamic Systems and Control Conference. American Society of Mechanical Engineers, 2016. http://dx.doi.org/10.1115/dscc2016-9848.

Der volle Inhalt der Quelle
Annotation:
Hydraulic fracturing is one of the key technologies for producing shale oil and gas. During hydraulic fracturing, a blender is used to mix sand with water and chemicals to obtain a fluidic mixture that will be pumped down a well to frack rocks. In order to achieve high-quality fracturing during a job, the blender needs to maintain its tub level as well as the density of the fluidic mixture. In this paper, an auto-tuning proportional-integral (PI) control is developed for the blender automation system to maintain the tub level of its fluidic mixture. The control system adopts a single-loop PI with gains that can be auto-tuned during a job. A relay feedback test is conducted for auto-tuning the PI gains online. The auto-tuning PI control has been successfully tested in a blender simulator. Experimental results have shown that the control performance was improved after auto-tuning and that the control system was adaptive to variation in system parameters.
APA, Harvard, Vancouver, ISO und andere Zitierweisen
5

Roveda, Loris, Andrea Testa, Asad Ali Shahid, Francesco Braghin und Dario Piga. „Q-Learning-Based Model Predictive Variable Impedance Control for Physical Human-Robot Collaboration (Extended Abstract)“. In Thirty-Second International Joint Conference on Artificial Intelligence {IJCAI-23}. California: International Joint Conferences on Artificial Intelligence Organization, 2023. http://dx.doi.org/10.24963/ijcai.2023/790.

Der volle Inhalt der Quelle
Annotation:
Physical human-robot collaboration is increasingly required in many contexts. To implement an effective collaboration, the robot should be able to recognize the human’s intentions and guarantee safe and adaptive behavior along the intended motion directions. The robot-control strategies with such attributes are particularly demanded in the industrial field. Indeed, with this aim, this work proposes a Q-Learning-based Model Predictive Variable Impedance Control (Q-LMPVIC) to assist the operators in physical human-robot collaboration (pHRC) tasks. A Cartesian impedance control loop is designed to implement decoupled compliant robot dynamics. The impedance control parameters (i.e., setpoint and damping parameters) are then optimized online in order to maximize the performance of the pHRC. For this purpose, an ensemble of neural networks is designed to learn the modeling of the human-robot interaction dynamics while capturing the associated uncertainties. The derived modeling is then exploited by the model predictive controller (MPC), enhanced with stability guarantees by means of Lyapunov constraints. The MPC is solved by making use of a Q-Learning method that, in its online implementation, uses an actor-critic algorithm to approximate the exact solution. Indeed, the Q-learning method provides an accurate and highly efficient solution (in terms of computational time and resources). The proposed approach has been validated through experimental tests, in which a Franka EMIKA panda robot has been used as a test platform.
APA, Harvard, Vancouver, ISO und andere Zitierweisen
Die Auswahlen zum Thema "Frank loops" für konkrete Quellenarten können Sie auch interessieren:
Zeitschriftenartikel Bücher
Wir bieten Rabatte auf alle Premium-Pläne für Autoren, deren Werke in thematische Literatursammlungen aufgenommen wurden. Kontaktieren Sie uns, um einen einzigartigen Promo-Code zu erhalten!

Zur Bibliographie