Thematische Bibliographien / Fluxgate current sensors / Zeitschriftenartikel
Um die anderen Arten von Veröffentlichungen zu diesem Thema anzuzeigen, folgen Sie diesem Link: Fluxgate current sensors.

Zeitschriftenartikel zum Thema „Fluxgate current sensors“

Autor: Grafiati
Veröffentlicht am 18. Mai 2024

Geben Sie eine Quelle nach APA, MLA, Chicago, Harvard und anderen Zitierweisen an

Wählen Sie eine Art der Quelle aus:

Machen Sie sich mit Top-50 Zeitschriftenartikel für die Forschung zum Thema "Fluxgate current sensors" bekannt.

Neben jedem Werk im Literaturverzeichnis ist die Option "Zur Bibliographie hinzufügen" verfügbar. Nutzen Sie sie, wird Ihre bibliographische Angabe des gewählten Werkes nach der nötigen Zitierweise (APA, MLA, Harvard, Chicago, Vancouver usw.) automatisch gestaltet.

Sie können auch den vollen Text der wissenschaftlichen Publikation im PDF-Format herunterladen und eine Online-Annotation der Arbeit lesen, wenn die relevanten Parameter in den Metadaten verfügbar sind.

Sehen Sie die Zeitschriftenartikel für verschiedene Spezialgebieten durch und erstellen Sie Ihre Bibliographie auf korrekte Weise.

1

Ripka, Pavel, Václav Grim und Andrey Chirtsov. „Improved 3-Phase Current Transducer“. Proceedings 2, Nr. 13 (26.11.2018): 1070. http://dx.doi.org/10.3390/proceedings2131070.

Der volle Inhalt der Quelle
Annotation:
We propose improved contactless DC/AC current transducer for 3-phase current lines based on 8 integrated fluxgate sensors. Using proper processing we ideally achieve a complete suppression of external homogeneous fields, and field gradients up to the 4th order. The sensitivity to external currents (crosstalk) is improved 15-times compared to [1]. The usage of micro fluxgate sensors instead of magnetoresistive sensors improves the temperature stability: the sensitivity temperature coefficient was reduced from 0.3%/K to 50 ppm/K and offset drift was reduced from 50 mA/K to 1 mA/K.
APA, Harvard, Vancouver, ISO und andere Zitierweisen
2

Zhao, Yue, Jing Lin Hu, Wen Zhong Lou und Long Fei Zhang. „The Study of a Fluxgate SPICE Model Based on Schmitt Trigger“. Key Engineering Materials 483 (Juni 2011): 212–18. http://dx.doi.org/10.4028/www.scientific.net/kem.483.212.

Der volle Inhalt der Quelle
Annotation:
Current fluxgate sensor probe SPICE models constructed by using arc tangent transfer function method and the diode model in fluxgate sensor simulation had some disadvantages which were non convergence, low simulation accuracy, discontinuously adjusted core characteristics and the model couldn’t simulate the hysteresis characteristic. IO characteristics of Schmitt Trigger was similar to the B-H curve of soft magnetic core in shape, for this reason Schmitt trigger was used to construct fluxgate probe SPICE model. HSPICE was used in simulation. Simulation results shown that this model can simulate the real electrical properties of fluxgate probe accurately. This model can be used for fluxgate sensor interface integrated circuit research and fluxgate sensor application, and provide a reference to judge the performance for fluxgate sensors of which core parameters within a certain range.
APA, Harvard, Vancouver, ISO und andere Zitierweisen
3

Ripka, Pavel, Pavel Mlejnek, Pavel Hejda, Andrey Chirtsov und Jan Vyhnánek. „Rectangular Array Electric Current Transducer with Integrated Fluxgate Sensors“. Sensors 19, Nr. 22 (14.11.2019): 4964. http://dx.doi.org/10.3390/s19224964.

Der volle Inhalt der Quelle
Annotation:
Novel rectangular yokeless current transducer with the range 400 A using 16 microfluxgate sensors around the busbar conductor is presented in this paper. Compared to yokeless transducers utilizing the differential pair of magnetic sensors, our solution has much better suppression of the external currents (lower crosstalk). Compared to industrial transducers with yoke, the new transducer has 15-times lower noise, 7-times better temperature stability, and same crosstalk. Sensor design and design of current monitoring system is presented together with the results of long-term field tests. Crosstalk error is examined in dependence on the number of the operating sensors and external current position.
APA, Harvard, Vancouver, ISO und andere Zitierweisen
4

Ren, Ming Yuan, Xiao Wei Liu, Hao Ran Li und Zhi Gang Mao. „Analytical Model of Fluxgate System“. Key Engineering Materials 503 (Februar 2012): 236–39. http://dx.doi.org/10.4028/www.scientific.net/kem.503.236.

Der volle Inhalt der Quelle
Annotation:
This paper presents a complete set of SIMULINK models, which allow exhaustive behavioral simulations of fluxgate system to be performed. The model construction is detailed and it is applied to the Vacquier-type fluxgate sensor. Well known characteristics of these sensors are confirmed through the simulations. In spite of this simplicity, the model has been successfully used to describe the variation of the output of a Vacquier-type fluxgate sensor with the amplitude and the frequency of the driving current. Using a previously developed 2nd harmonic fluxgate magnetometer, some preliminary experimental results are obtained confirming the appearance at its output.
APA, Harvard, Vancouver, ISO und andere Zitierweisen
5

Msaed, Aline, Mansour Tawk, Youssef Zaatar und Doumit Zaouk. „Design of an Accuracy Current Sensor Using Amorphous Fine Wire of FeCoSiB“. Advanced Materials Research 324 (August 2011): 423–26. http://dx.doi.org/10.4028/www.scientific.net/amr.324.423.

Der volle Inhalt der Quelle
Annotation:
In this paper, we are interested in electric current reconstruction from magnetic field measurements. The major difficulty of this principle is in the ability to reject magnetic field perturbations which affect the accuracy of the measurements. The first experimental validation of the approach of gradient measurement shows large errors in the current reconstruction using two independent fluxgate sensors. These errors were attributed to mechanical alignment and different residual magnetic states of the fluxgate sensors. We then suggested an effective solution able to overcome these problems. This solution consists of a fluxgate gradiometer placed above U-shaped conductor carrying the unknown current to be reconstructed. The experimental results of this system show a good rejection of uniform and non-uniform magnetic field perturbations and furthermore an improvement of the accuracy of the measurements.
APA, Harvard, Vancouver, ISO und andere Zitierweisen
6

Coillot, C., J. Moutoussamy, M. Boda und P. Leroy. „New ferromagnetic core shapes for induction sensors“. Journal of Sensors and Sensor Systems 3, Nr. 1 (15.01.2014): 1–8. http://dx.doi.org/10.5194/jsss-3-1-2014.

Der volle Inhalt der Quelle
Annotation:
Abstract. Induction sensors are used in a wide range of scientific and industrial applications. One way to improve these is rigorous modelling of the sensor combined with a low voltage and current input noise preamplifier aiming to optimize the whole induction magnetometer. In this paper, we explore another way, which consists in the use of original ferromagnetic core shapes of induction sensors, which bring substantial improvements. These new configurations are the cubic, orthogonal and coiled-core induction sensors. For each of them we give modelling elements and discuss their benefits and drawbacks with respect to a given noise-equivalent magnetic induction goal. Our discussion is supported by experimental results for the cubic and orthogonal configurations, while the coiled-core configuration remains open to experimental validation. The transposition of these induction sensor configurations to other magnetic sensors (fluxgate and giant magneto-impedance) is an exciting prospect of this work.
APA, Harvard, Vancouver, ISO und andere Zitierweisen
7

Kolomeitsev, A. A., I. A. Zatonov, M. I. Pischanskaya, P. F. Baranov, D. P. Ilyaschenko und E. V. Verkhoturova. „Designing a Planar Fluxgate Using the PCB Technology“. Devices and Methods of Measurements 12, Nr. 2 (25.06.2021): 117–23. http://dx.doi.org/10.21122/2220-9506-2021-12-2-117-123.

Der volle Inhalt der Quelle
Annotation:
The development of novel methods, scientific devices and means for measuring magnetic fields generated by ultra-low current is among promising directions in the development of medical equipment and instruments for geodetic surveys and space exploration. The present work is to develop a small sensor capable of detecting weak magnetic fields, which sources are biocurrents, radiation of far space objects and slight fluctuations of the geomagnetic field. Scientists estimate the strength of such magnetic fields as deciles of nanotesla. The key requirements for the sensors of ultra-low magnetic field are: resolution, noise level in the measurement channel, temperature stability, linearity and repeatability of the characteristics from one produced item to another. The aforementioned characteristics can be achieved by using planar technologies and microelectromechanical systems (MEMS) in such advanced sensors.The work describes a complete R&D cycle, from creating the computer model of the sensor under study to manufacturing of a working prototype. To assess the effect of the geometry and material properties, the Jiles–Atherton model is implemented which, unlike the majority of the models used, allows considering the non-linearity of the core, its hysteresis properties and influence of residual magnetization.The dimensions of the developed sensor are 40×20×5 mm, while the technology allows its further diminishment. The sensor has demonstrated the linearity of its properties in the range of magnetic field strength from 0.1 nT to 50 µT for a rms current of excitation of 1.25 mA at a frequency of 30 kHz. The average sensitivity for the second harmonic is 54 µV/nT.
APA, Harvard, Vancouver, ISO und andere Zitierweisen
8

Zhi, Feng und Lei. „Improved Performance of Fundamental Mode Orthogonal Fluxgate Using a Micro-Patterned Meander-Shaped Ribbon Core“. Sensors 19, Nr. 23 (20.11.2019): 5058. http://dx.doi.org/10.3390/s19235058.

Der volle Inhalt der Quelle
Annotation:
In this paper, the performance of orthogonal fluxgate sensors with meander-shaped cores is studied in fundamental mode. The meander-shaped cores are made by micro-patterning technology based on a Co-based amorphous ribbon. The main advantage of this structure is that the linear operating range of the sensor can be adjusted simply by changing the number of strips, without affecting the excitation mechanism. Experiments show that a linear range of 560 μT is obtained by a meander-shaped core sensor with 12 strips. The changes in the number of strips can also increase sensitivity and reduce noise of the sensor. We can achieve a sensitivity of 600 V/T and a noise level of 0.64 nT/√Hz at 1 Hz for a meander-shaped core sensor with eight strips. Compared with the performance of the sensors built using a single strip core having the same equivalent cross-sectional area, the use of meander-shaped core can provide a higher sensitivity and linearity, and a lower noise level. We also compare the performance of an eight-strip meander-shaped core orthogonal fluxgate operated in the fundamental and second-harmonic modes. Similar sensitivity for the two modes can be obtained by adjusting the excitation current. In this case, we find that the noise of sensor operating in fundamental mode is about five times lower than that of the sensor operating in second-harmonic mode. This can be interpreted as the suppression of Barkhausen noise by unipolar bias in the fundamental mode.
APA, Harvard, Vancouver, ISO und andere Zitierweisen
9

Cao, Daping, Si Liu und Changzhong Jiang. „Maximum energy transfer conditions in parametric amplification of current-output fluxgate sensors“. Sensors and Actuators A: Physical 173, Nr. 1 (Januar 2012): 136–40. http://dx.doi.org/10.1016/j.sna.2011.11.010.

Der volle Inhalt der Quelle
APA, Harvard, Vancouver, ISO und andere Zitierweisen
10

Huong Giang, Do Thi, Ho Anh Tam, Vu Thi Ngoc Khanh, Nguyen Trong Vinh, Phung Anh Tuan, Nguyen Van Tuan, Nguyen Thi Ngoc und Nguyen Huu Duc. „Magnetoelectric Vortex Magnetic Field Sensors Based on the Metglas/PZT Laminates“. Sensors 20, Nr. 10 (15.05.2020): 2810. http://dx.doi.org/10.3390/s20102810.

Der volle Inhalt der Quelle
Annotation:
This paper describes the route, from simulations toward experiments, for optimizing the magnetoelectric (ME) geometries for vortex magnetic field sensors. The research is performed on the base of the Metglas/Piezoelectric (PZT) laminates in both open and closed magnetic circuit (OMC and CMC) geometries with different widths (W), lengths (L), and diameters (D). Among these geometries, the CMC laminates demonstrate advantages not only in their magnetic flux distribution, but also in their sensitivity and in their independence of the position of the vortex center. In addition, the ME voltage signal is found to be enhanced by increasing the magnetostrictive volume fraction. Optimal issues are incorporated to realize a CMC-based ME double sandwich current sensor in the ring shape with D × W = 6 mm × 1.5 mm and four layers of Metglas. At the resonant frequency of 174.4 kHz, this sensor exhibits the record sensitivity of 5.426 V/A as compared to variety of devices such as the CMC ME sensor family, fluxgate, magnetoresistive, and Hall-effect-based devices. It opens a potential to commercialize a new generation of ME-based current and (or) vortex magnetic sensors.
APA, Harvard, Vancouver, ISO und andere Zitierweisen
11

Mironenko, Olga, und Willett Kempton. „Comparing Devices for Concurrent Measurement of AC Current and DC Injection during Electric Vehicle Charging“. World Electric Vehicle Journal 11, Nr. 3 (29.08.2020): 57. http://dx.doi.org/10.3390/wevj11030057.

Der volle Inhalt der Quelle
Annotation:
Widespread adoption of electric vehicles (EVs) requires additional safety countermeasures to prevent DC injection from EVs into the AC grid via Electric Vehicle Supply Equipment (EVSE). Moreover, for energy purchase, and even more so for vehicle-to-grid (V2G) services, the EVSE must conduct high precision bidirectional power and energy measurements. This paper introduces operating principles, structure, performance, and cost comparison of three current sensing technologies—current transformer, shunt and fluxgate—for metering and protection within an EVSE, concluding with recommendations among those sensors for the most beneficial applications concerning EV charging.
APA, Harvard, Vancouver, ISO und andere Zitierweisen
12

Djamal, Mitra, und Ramli. „Thin Film of Giant Magnetoresistance (GMR) Material Prepared by Sputtering Method“. Advanced Materials Research 770 (September 2013): 1–9. http://dx.doi.org/10.4028/www.scientific.net/amr.770.1.

Der volle Inhalt der Quelle
Annotation:
In recent decades, a new magnetic sensor based on magnetoresistance effect is highly researched and developed intensively. GMR material has great potential as next generation magnetic field sensing devices. It has also good magnetic and electric properties, and high potential to be developed into various applications of electronic devices such as: magnetic field sensor, current measurements, linear and rotational position sensor, data storage, head recording, and non-volatile magnetic random access memory. GMR material can be developed to be solid state magnetic sensors that are widely used in low field magnetic sensing applications. A solid state magnetic sensor can directly convert magnetic field into resistance, which can be easily detected by applying a sense current or voltage. Generally, there are many sensors for measuring the low magnetic field, such as: fluxgate sensor, Hall sensor, induction coil, GMR sensor, and SQUID sensor. Compared to other low magnetic field sensing techniques, solid state sensors have demonstrated many advantages, such as: small size (<0.1mm2), low power, high sensitivity (~0.1Oe) and good compatibility with CMOS technology. The thin film of GMR is usually prepared using: sputtering, electro deposition or molecular beam epitaxy (MBE) techniques. But so far, not many researchers reported the manufacture of thin film of GMR by dc-Opposed Target Magnetron Sputtering (dc-OTMS). In this paper, we inform the development of GMR thin film with sandwich and spin valve structures using dc-OTMS method. We have also developed organic GMR with Alq3 as a spacer layer.
APA, Harvard, Vancouver, ISO und andere Zitierweisen
13

Murzin, Dmitry, Desmond J. Mapps, Kateryna Levada, Victor Belyaev, Alexander Omelyanchik, Larissa Panina und Valeria Rodionova. „Ultrasensitive Magnetic Field Sensors for Biomedical Applications“. Sensors 20, Nr. 6 (11.03.2020): 1569. http://dx.doi.org/10.3390/s20061569.

Der volle Inhalt der Quelle
Annotation:
The development of magnetic field sensors for biomedical applications primarily focuses on equivalent magnetic noise reduction or overall design improvement in order to make them smaller and cheaper while keeping the required values of a limit of detection. One of the cutting-edge topics today is the use of magnetic field sensors for applications such as magnetocardiography, magnetotomography, magnetomyography, magnetoneurography, or their application in point-of-care devices. This introductory review focuses on modern magnetic field sensors suitable for biomedicine applications from a physical point of view and provides an overview of recent studies in this field. Types of magnetic field sensors include direct current superconducting quantum interference devices, search coil, fluxgate, magnetoelectric, giant magneto-impedance, anisotropic/giant/tunneling magnetoresistance, optically pumped, cavity optomechanical, Hall effect, magnetoelastic, spin wave interferometry, and those based on the behavior of nitrogen-vacancy centers in the atomic lattice of diamond.
APA, Harvard, Vancouver, ISO und andere Zitierweisen
14

Fischer, David, Werner Magnes, Christian Hagen, Ivan Dors, Mark W. Chutter, Jerry Needell, Roy B. Torbert et al. „Optimized merging of search coil and fluxgate data for MMS“. Geoscientific Instrumentation, Methods and Data Systems 5, Nr. 2 (17.11.2016): 521–30. http://dx.doi.org/10.5194/gi-5-521-2016.

Der volle Inhalt der Quelle
Annotation:
Abstract. The Magnetospheric Multiscale mission (MMS) targets the characterization of fine-scale current structures in the Earth's tail and magnetopause. The high speed of these structures, when traversing one of the MMS spacecraft, creates magnetic field signatures that cross the sensitive frequency bands of both search coil and fluxgate magnetometers. Higher data quality for analysis of these events can be achieved by combining data from both instrument types and using the frequency bands with best sensitivity and signal-to-noise ratio from both sensors. This can be achieved by a model-based frequency compensation approach which requires the precise knowledge of instrument gain and phase properties. We discuss relevant aspects of the instrument design and the ground calibration activities, describe the model development and explain the application on in-flight data. Finally, we show the precision of this method by comparison of in-flight data. It confirms unity gain and a time difference of less than 100 µs between the different magnetometer instruments.
APA, Harvard, Vancouver, ISO und andere Zitierweisen
15

Song, Sixuan, Ming Deng, Kai Chen, Muer A und Sheng Jin. „A new borehole electromagnetic receiver developed for controlled-source electromagnetic methods“. Geoscientific Instrumentation, Methods and Data Systems 10, Nr. 1 (26.02.2021): 55–64. http://dx.doi.org/10.5194/gi-10-55-2021.

Der volle Inhalt der Quelle
Annotation:
Abstract. Conventional surface electromagnetic methods have limitations of a shallow detection depth and low resolution. To increase the detection depth and resolution, borehole–surface electromagnetic methods for electromagnetic three-dimensional observations of the ground, tunnels, and boreholes have been developed. Current borehole receivers only measure a single parameter of the magnetic field component, which does not meet the special requirements of controlled-source electromagnetic (CSEM) methods. This study proposes a borehole electromagnetic receiver that realizes synchronous acquisition of the vertical electric field component in the borehole and the three-axis orthogonal magnetic field components. This receiver uses Ti electrodes and fluxgate magnetometers (fluxgates) as sensors to acquire electric and magnetic field components. Multi-component comprehensive observation methods that add the electric field component can effectively support the CSEM method, improve detection accuracy, and exhibit a strong potential for detecting deep ore bodies. We conducted laboratory and field experiments to verify the performance of our new borehole electromagnetic receiver. The receiver achieved a magnetic field noise of less than 6 pTHz-1/2 at 1 kHz, and the electric field noise floor was approximately 20 nVm-1Hz-1/2 at 1 kHz. The −3 dB electric field bandwidth can reach DC −10 kHz. The results of our experiments prove that high-quality CSEM signals can be obtained using this new borehole electromagnetic receiver and that the electric field component exhibits sufficient advantages for measuring the vertical component of the electric field.
APA, Harvard, Vancouver, ISO und andere Zitierweisen
16

Coillot, C., J. Moutoussamy, G. Chanteur, P. Robert und F. Alves. „On-board hybrid magnetometer of NASA CHARM-II rocket: principle, design and performances“. Journal of Sensors and Sensor Systems 2, Nr. 2 (06.08.2013): 137–45. http://dx.doi.org/10.5194/jsss-2-137-2013.

Der volle Inhalt der Quelle
Annotation:
Abstract. We present a hybrid tri-axes magnetometer designed to measure weak magnetic fields in space from DC (direct current) up to a few kHz with a better sensitivity than fluxgate magnetometers at frequencies above a few Hz. This magnetometer combines a wire-wound ferromagnetic ribbon and a classical induction sensor. The nature of the wire-wound ferromagnetic ribbon sensor, giant magneto-impedance or magneto-inductance, is discussed. New configurations of wire-wound ferromagnetic ribbon sensors based on closed magnetic circuits are suggested and the hybrid sensor is described. The electronic conditioning of the wire-wound ribbon makes use of an alternating bias field to cancel the offset and linearize the output. Finally we summarize the main performances of the hybrid magnetometer and we discuss its advantages and drawbacks. A prototype has been built and was part of the scientific payload of the NASA rocket experiment CHARM-II (Correlation of High Frequency and Auroral Roar Measurements) launched in the auroral ionosphere. Unfortunately the launch campaign ended without any noticeable magnetic event and the rocket was eventually launched on 16 February 2010, through a very quiescent arc in the magnetic cusp and no wave activity was detected at frequencies observable by the hybrid magnetometer.
APA, Harvard, Vancouver, ISO und andere Zitierweisen
17

Rasca, Anthony P., William M. Farrell, Phyllis L. Whittlesey, Robert J. MacDowall, Stuart D. Bale und Justin C. Kasper. „Magnetic Field Dropouts and Associated Plasma Wave Emission near the Electron Plasma Frequency at Switchback Boundaries as Observed by the Parker Solar Probe“. Astrophysical Journal 935, Nr. 2 (01.08.2022): 81. http://dx.doi.org/10.3847/1538-4357/ac80c3.

Der volle Inhalt der Quelle
Annotation:
Abstract The first solar encounters by the Parker Solar Probe revealed the magnetic field to be dominated by short field reversals in the radial direction, referred to as “switchbacks.” While radial velocity and proton temperature were shown to increase inside the switchbacks, ∣B∣ exhibits very brief dropouts only at the switchback boundaries. Brief intensifications in spectral density measurements near the electron plasma frequency, f pe, were also observed at these boundaries, indicating the presence of plasma waves triggered by current systems in the form of electron beams. We perform a correlative study using observations from the Parker FIELDS Radio Frequency Spectrometer and Fluxgate Magnetometer to compare occurrences of spectral density intensifications at the electron plasma frequency (f pe emissions) and ∣B∣ dropouts at switchback boundaries during Parker’s first and second solar encounters. We find that only a small fraction of minor ∣B∣ dropouts are associated with f pe emissions. This fraction increases with ∣B∣ dropout size until all dropouts are associated with f pe emissions. Brief spikes in the differential electron flux measured by the SWEAP Solar Probe Analyzer for Electron sensors also occur in conjunction with nearly all f pe emissions. This suggests that in the presence of strong ∣B∣ dropouts, electron currents that create the perturbation in ∣B∣ along the boundaries are also stimulating plasma waves such as Langmuir waves.
APA, Harvard, Vancouver, ISO und andere Zitierweisen
18

Mahavarkar, Prasanna, Jacob John, Vijay Dhapre, Varun Dongre und Sachin Labde. „Tri-axial square Helmholtz coil system at the Alibag Magnetic Observatory: upgraded to a magnetic sensor calibration facility“. Geoscientific Instrumentation, Methods and Data Systems 7, Nr. 2 (12.04.2018): 143–49. http://dx.doi.org/10.5194/gi-7-143-2018.

Der volle Inhalt der Quelle
Annotation:
Abstract. A tri-axial square Helmholtz coil system for the study of palaeomagnetic studies, manufactured by GEOFYZIKA (former Czechoslovakia), was successfully commissioned at the Alibag Magnetic Observatory (IAGA code: ABG) in the year 1985. This system was used for a few years, after which the system encountered technical problems with the control unit. Rectification of the unit could not be undertaken, as the information document related to this system was not available, and as a result the system had been lying in an unused state for a long time, until 2015, when the system was recommissioned and upgraded to a test facility for calibrating the magnetometer sensors. We have upgraded the system with a constant current source and a data-logging unit. Both of these units have been designed and developed in the institute laboratory. Also, re-measurements of the existing system have been made thoroughly. The upgraded system is semi-automatic, enabling non-specialists to operate it after a brief period of instruction. This facility is now widely used at the parent institute and external institutions to calibrate magnetometers and it also serves as a national facility. Here the design of this system with the calibration results for the space-borne fluxgate magnetometers is presented.
APA, Harvard, Vancouver, ISO und andere Zitierweisen
19

Ripka, Pavel. „Contactless measurement of electric current using magnetic sensors“. tm - Technisches Messen 86, Nr. 10 (25.10.2019): 586–98. http://dx.doi.org/10.1515/teme-2019-0032.

Der volle Inhalt der Quelle
Annotation:
AbstractWe review recent advances in magnetic sensors for DC/AC current transducers, especially novel AMR sensors and integrated fluxgates, and we make critical comparison of their properties. Most contactless electric current transducers use magnetic cores to concentrate the flux generated by the measured current and to shield the sensor against external magnetic fields. In order to achieve this, the magnetic core should be massive. We present coreless current transducers which are lightweight, linear and free of hysteresis and remanence. We also show how to suppress their weak point: crosstalk from external currents and magnetic fields.
APA, Harvard, Vancouver, ISO und andere Zitierweisen
20

Fidan, A., S. Atalay, N. Bayri, F. E. Atalay und V. Yagmur. „Coil-Less Fluxgate Effect in Amorphous Co71Fe1Mo1Mn4Si14B9 Ribbon“. Solid State Phenomena 190 (Juni 2012): 167–70. http://dx.doi.org/10.4028/www.scientific.net/ssp.190.167.

Der volle Inhalt der Quelle
Annotation:
In this study, the coil-less fluxgate effect in Co71Fe1Mo1Mn4Si14B9 amorphous ribbon was investigated. The coil-less fluxgate is a new type of fluxgate sensor without a coil. It is based on helical anisotropy and deep circumferential magnetic saturation in the ferromagnetic fluxgate core. Coil-less fluxgate measurements were performed in as-cast and annealed ribbons at 480 mA current with 3, 12.5 and 25 rad/m torsion. The second harmonic of the output voltage detected from the ends of the wire show a linear variation in the low magnetic field region. The sensitivity of the current annealed ribbons in the presence of 25 rad/m torsion is about 570 V/T, which is comparable with previously reported fluxgate sensitivity values. The presented sensor has no coil so it is much easier to reduce the size of the sensor and easy to fabricate it.
APA, Harvard, Vancouver, ISO und andere Zitierweisen
21

Kudo, T., S. Kuribara, T. Asano und K. Toyama. „Fluxgate DC Earth Leakage Current Sensor“. Journal of the Magnetics Society of Japan 34, Nr. 6 (2010): 588–92. http://dx.doi.org/10.3379/msjmag.1009r003.

Der volle Inhalt der Quelle
APA, Harvard, Vancouver, ISO und andere Zitierweisen
22

Tipek, A., T. O’Donnell, A. Connell, P. McCloskey und S. C. O’Mathuna. „PCB fluxgate current sensor with saturable inductor“. Sensors and Actuators A: Physical 132, Nr. 1 (November 2006): 21–24. http://dx.doi.org/10.1016/j.sna.2006.06.057.

Der volle Inhalt der Quelle
APA, Harvard, Vancouver, ISO und andere Zitierweisen
23

Cho, Juhee, Suyong Kim, Seungjae Lee und Byungtaek Kim. „Linearity analysis According to the Number of Excitation Winding Turns of MVDC Class Fluxgate Type Current Sensor“. TRANSACTION OF THE KOREAN INSTITUTE OF ELECTRICAL ENGINEERS P 72, Nr. 4 (31.12.2023): 262–66. http://dx.doi.org/10.5370/kieep.2023.72.4.262.

Der volle Inhalt der Quelle
APA, Harvard, Vancouver, ISO und andere Zitierweisen
24

Xiao, Xia, Hongtian Song und Hongbin Li. „A High Accuracy AC+DC Current Transducer for Calibration“. Sensors 22, Nr. 6 (12.03.2022): 2214. http://dx.doi.org/10.3390/s22062214.

Der volle Inhalt der Quelle
Annotation:
Facing a lack of high accuracy current standards in the calibration of AC (Alternating Current) + DC (Direct Current) measurement devices that function to measure DC and AC simultaneously, a measurement method with high accuracy is proposed based on zero-flux self-oscillating fluxgate. An iron core and two windings are added onto the single-iron-core double-winding structure of the traditional self-oscillating fluxgate. The added iron core and its upper winding are used to weaken the influence of ripple on the sensor’s accuracy. The other one of the added windings is used for the feedback from the AC+DC magnetic potential, allowing the sensor to work in a zero-flux state and to measure AC+DC simultaneously. An AC+DC transducer prototype with an AC ranging from 0–500 A and DC 0–300 A is developed by selecting the core parameters and an optimized design of the circuit. The test results of the prototype show that the prototype can measure the AC and DC simultaneously, and the measurement accuracy reaches class 0.05 level in the nominal current range. This transducer can be used as a calibration standard of measurement devices for AC only, DC only, or AC and DC simultaneously. Compared with the AC+DC current transducer with the same accuracy level, the proposed transducer has fewer cores and simpler measuring circuit.
APA, Harvard, Vancouver, ISO und andere Zitierweisen
25

Wei, Yutong, Yang Wang, Meiling Wang und Chaofeng Ye. „Digital fluxgate current sensor based on second harmonic detection“. International Journal of Applied Electromagnetics and Mechanics 64, Nr. 1-4 (10.12.2020): 111–18. http://dx.doi.org/10.3233/jae-209313.

Der volle Inhalt der Quelle
Annotation:
This paper presents a new digital fluxgate current sensor based on second harmonic detection for DC and AC measurement. The sensor utilizes a feedback loop to obtain an almost zero-flux condition, i.e., a balance between the magnetic flux of the primary current and the feedback current, in which way the feedback current is proportional to the primary current. The AC magnetic flux is detected with an induction coil, and the DC zero-flux condition is realized by magnetic saturation effect method, where the magnetic core is periodically magnetized and then the second harmonic of the magnetization current is calculated as an indication of the DC magnetic flux. After theoretical derivation, the operating principle of the sensor was investigated using a numerical simulation model built with Simulink of MATLAB. In addition, a prototype sensor was developed and tested. The experiment results demonstrate that the current sensor works properly for DC and AC measurement. The average error is about 0.06% for DC measurement.
APA, Harvard, Vancouver, ISO und andere Zitierweisen
26

Marusenkov, Andriy. „Possibilities of further improvement of 1 s fluxgate variometers“. Geoscientific Instrumentation, Methods and Data Systems 6, Nr. 2 (23.08.2017): 301–9. http://dx.doi.org/10.5194/gi-6-301-2017.

Der volle Inhalt der Quelle
Annotation:
Abstract. The paper discusses the possibility of improving temperature and noise characteristics of fluxgate variometers. The new fluxgate sensor with a Co-based amorphous ring core is described. This sensor is capable of improving the signal-to-noise ratio at the recording short-period geomagnetic variations. Besides the sensor performance, it is very important to create the high-stability compensation field that cancels the main Earth magnetic field inside the magnetic cores. For this purpose the new digitally controlled current source with low noise level and high temperature stability is developed.
APA, Harvard, Vancouver, ISO und andere Zitierweisen
27

Ripka, Pavel, Michal Pribil, Vojtech Petrucha, Vaclav Grim und Karel Draxler. „A Fluxgate Current Sensor With an Amphitheater Busbar“. IEEE Transactions on Magnetics 52, Nr. 7 (Juli 2016): 1–4. http://dx.doi.org/10.1109/tmag.2016.2540523.

Der volle Inhalt der Quelle
APA, Harvard, Vancouver, ISO und andere Zitierweisen
28

Indrasari, Widyaningrum, Mitra Djamal, Wahyu Srigutomo und Nur Hadziqoh. „High Sensitivity Fluxgate Sensor for Detection of AC Magnetic Field: Equipment for Characterization of Magnetic Material in Subsurface“. Advanced Materials Research 896 (Februar 2014): 718–21. http://dx.doi.org/10.4028/www.scientific.net/amr.896.718.

Der volle Inhalt der Quelle
Annotation:
A magnetic material characterization at subsurface of soil using portable controlled source electromagnetic (CSEM) methods needs a continuous signal which has frequency more than 1 kHz. This signal can be obtained from the function generator which its output was amplified by a power amplifier with a gain of 16 times. The AC output current of the power amplifier can be varied from 0.1 A 0.45 A at frequency of 5 kHz. To generate an AC magnetic field, the output of the power amplifier is then connected to the solenoid with a ferrite-core coils number of 130 and diameter of 3 cm. The AC magnetic field was detected by fluxgate sensor with high sensitivity (568 mV/μT or 1.76 nT/mV). By adjusting the excitation and phase detector frequency in the electronic circuits of fluxgate sensor, will enable this sensor work at higher frequency. The signal processing circuit of fluxgate sensor uses the 2nd-order of Butterworth filter with frequency scaling factor of 10.6 kHz. By this method fluxgate sensor can detect the AC magnetic field frequency up to 10 kHz. The output voltage of this sensor has a maximum measurement range of 0.23 2.95 V at frequency of 5 kHz. Meanwhile, the minimum detectable magnetic field is 1.5 μT; with a relative error of measurement was 2.74 %.
APA, Harvard, Vancouver, ISO und andere Zitierweisen
29

Shanglin, Yang, und Fan Rong. „Flexible-substrate Fluxgate Current Sensor Based on MEMS Technology“. Sensors and Materials 32, Nr. 9 (30.09.2020): 3083. http://dx.doi.org/10.18494/sam.2020.2737.

Der volle Inhalt der Quelle
APA, Harvard, Vancouver, ISO und andere Zitierweisen
30

O’Donnell, Terence, A. Tipek, A. Connell, P. McCloskey und S. C. O’Mathuna. „Planar fluxgate current sensor integrated in printed circuit board“. Sensors and Actuators A: Physical 129, Nr. 1-2 (Mai 2006): 20–24. http://dx.doi.org/10.1016/j.sna.2005.09.044.

Der volle Inhalt der Quelle
APA, Harvard, Vancouver, ISO und andere Zitierweisen
31

Ponjavic, Milan M., und Radivoje M. Duric. „Nonlinear Modeling of the Self-Oscillating Fluxgate Current Sensor“. IEEE Sensors Journal 7, Nr. 11 (November 2007): 1546–53. http://dx.doi.org/10.1109/jsen.2007.908234.

Der volle Inhalt der Quelle
APA, Harvard, Vancouver, ISO und andere Zitierweisen
32

Wei, Yutong, Cheng Li, Wenlei Zhao, Mingyu Xue, Bin Cao, Xu Chu und Chaofeng Ye. „Electrical Compensation for Magnetization Distortion of Magnetic Fluxgate Current Sensor“. IEEE Transactions on Instrumentation and Measurement 71 (2022): 1–9. http://dx.doi.org/10.1109/tim.2022.3152861.

Der volle Inhalt der Quelle
APA, Harvard, Vancouver, ISO und andere Zitierweisen
33

Kudo, T., S. Kuribara und Y. Takahashi. „Fluxgate DC Earth Leakage Current Sensor with Self-Excited Circuit“. Journal of the Magnetics Society of Japan 37, Nr. 4 (2013): 327–32. http://dx.doi.org/10.3379/msjmag.1306r002.

Der volle Inhalt der Quelle
APA, Harvard, Vancouver, ISO und andere Zitierweisen
34

Yang, Xiaoguang, Wei Guo, Congcong Li, Bo Zhu, Tanggong Chen und Wenqi Ge. „Design Optimization of a Fluxgate Current Sensor With Low Interference“. IEEE Transactions on Applied Superconductivity 26, Nr. 4 (Juni 2016): 1–5. http://dx.doi.org/10.1109/tasc.2016.2536619.

Der volle Inhalt der Quelle
APA, Harvard, Vancouver, ISO und andere Zitierweisen
35

Yang, Xiaoguang, Yuanyuan Li, Weidong Zheng, Wei Guo, Youhua Wang und Rongge Yan. „Design and Realization of a Novel Compact Fluxgate Current Sensor“. IEEE Transactions on Magnetics 51, Nr. 3 (März 2015): 1–4. http://dx.doi.org/10.1109/tmag.2014.2358671.

Der volle Inhalt der Quelle
APA, Harvard, Vancouver, ISO und andere Zitierweisen
36

Miles, D. M., J. R. Bennest, I. R. Mann und D. K. Millling. „A radiation hardened digital fluxgate magnetometer for space applications“. Geoscientific Instrumentation, Methods and Data Systems 2, Nr. 2 (13.09.2013): 213–24. http://dx.doi.org/10.5194/gi-2-213-2013.

Der volle Inhalt der Quelle
Annotation:
Abstract. Space-based measurements of Earth's magnetic field are required to understand the plasma processes responsible for energising particles in the Van Allen radiation belts and influencing space weather. This paper describes a prototype fluxgate magnetometer instrument developed for the proposed Canadian Space Agency's (CSA) Outer Radiation Belt Injection, Transport, Acceleration and Loss Satellite (ORBITALS) mission and which has applications in other space and suborbital applications. The magnetometer is designed to survive and operate in the harsh environment of Earth's radiation belts and measure low-frequency magnetic waves, the magnetic signatures of current systems, and the static background magnetic field. The new instrument offers improved science data compared to its predecessors through two key design changes: direct digitisation of the sensor and digital feedback from two cascaded pulse-width modulators combined with analog temperature compensation. These provide an increase in measurement bandwidth up to 450 Hz with the potential to extend to at least 1500 Hz. The instrument can resolve 8 pT on a 65 000 nT field with a magnetic noise of less than 10 pT/√Hz at 1 Hz. This performance is comparable with other recent digital fluxgates for space applications, most of which use some form of sigma-delta (ΣΔ) modulation for feedback and omit analog temperature compensation. The prototype instrument was successfully tested and calibrated at the Natural Resources Canada Geomagnetics Laboratory.
APA, Harvard, Vancouver, ISO und andere Zitierweisen
37

Cao, Jianan, Juan Zhao und Shuai Cheng. „Research on the simplified direct-current fluxgate sensor and its demodulation“. Measurement Science and Technology 30, Nr. 7 (24.05.2019): 075101. http://dx.doi.org/10.1088/1361-6501/ab09bf.

Der volle Inhalt der Quelle
APA, Harvard, Vancouver, ISO und andere Zitierweisen
38

Yang, Xiaoguang, Yuanyuan Li, Wei Guo, Weidong Zheng, Cunfu Xie und Hongli Yu. „A New Compact Fluxgate Current Sensor for AC and DC Application“. IEEE Transactions on Magnetics 50, Nr. 11 (November 2014): 1–4. http://dx.doi.org/10.1109/tmag.2014.2330373.

Der volle Inhalt der Quelle
APA, Harvard, Vancouver, ISO und andere Zitierweisen
39

Yang, Xiaoguang, Wei Guo, Congcong Li, Bo Zhu, Lingling Pang und Youhua Wang. „A Fluxgate Current Sensor With a U-Shaped Magnetic Gathering Shell“. IEEE Transactions on Magnetics 51, Nr. 11 (November 2015): 1–4. http://dx.doi.org/10.1109/tmag.2015.2452267.

Der volle Inhalt der Quelle
APA, Harvard, Vancouver, ISO und andere Zitierweisen
40

Tan, Xiangyu, Wenyun Li, Guochao Qian, Gang Ao, Xiaowei Xu, Ran Wei, Yi Ke und Wenbin Zhang. „Design of a Fluxgate Weak Current Sensor with Anti-Low Frequency Interference Ability“. Energies 15, Nr. 22 (14.11.2022): 8489. http://dx.doi.org/10.3390/en15228489.

Der volle Inhalt der Quelle
Annotation:
According to the requirements of weak current measurement in power grid, a weak current sensor with anti-low frequency interference ability is developed. The sensor adopts the principle of fluxgate detection and adds a magnetic ring on the original basis. The structure of the magnetic ring is simulated using comsol to further improve detection sensitivity. In order to solve the problem that the electromagnetic current sensor is vulnerable to the interference of geomagnetic field and power frequency magnetic field in weak current measurement, a magnetic shielding method with low cost is selected, and the shielding shell structure is designed using a finite element analysis method. The experimental results show that the minimum measurable current is 1 mA, the measurement range is 1 mA–1 A, and the bandwidth is DC-16 kHz. The designed magnetic shielding shell can effectively reduce 97.3% of the DC magnetic field interference and 95.7% of the power frequency magnetic field interference. The sensor can realize accurate measurement of weak current in power grid.
APA, Harvard, Vancouver, ISO und andere Zitierweisen
41

Yang, Xiaoguang, Jing Wen, Meiqi Chen, Zheng Gao, Ligen Xi und Yuqi Li. „Analysis and design of a self-oscillating bidirectionally saturated fluxgate current sensor“. Measurement 157 (Juni 2020): 107687. http://dx.doi.org/10.1016/j.measurement.2020.107687.

Der volle Inhalt der Quelle
APA, Harvard, Vancouver, ISO und andere Zitierweisen
42

Wang, Nong, Zhonghua Zhang, Zhengkun Li, Yang Zhang, Qing He, Bing Han und Yunfeng Lu. „Self-Oscillating Fluxgate-Based Quasi-Digital Sensor for DC High-Current Measurement“. IEEE Transactions on Instrumentation and Measurement 64, Nr. 12 (Dezember 2015): 3555–63. http://dx.doi.org/10.1109/tim.2015.2444258.

Der volle Inhalt der Quelle
APA, Harvard, Vancouver, ISO und andere Zitierweisen
43

Yang, Xiaoguang, Meiqi Chen und Zhe Jia. „Analysis and design of a self-oscillating quasi-digital fluxgate current sensor for DC current measurement“. Review of Scientific Instruments 92, Nr. 2 (01.02.2021): 025001. http://dx.doi.org/10.1063/5.0030868.

Der volle Inhalt der Quelle
APA, Harvard, Vancouver, ISO und andere Zitierweisen
44

Yang, Xiaoguang, Bo Zhang, Youhua Wang, Zhigang Zhao und Weili Yan. „The optimization of dual-core closed-loop fluxgate technology in precision current sensor“. Journal of Applied Physics 111, Nr. 7 (April 2012): 07E722. http://dx.doi.org/10.1063/1.3677200.

Der volle Inhalt der Quelle
APA, Harvard, Vancouver, ISO und andere Zitierweisen
45

Watanabe, Y., M. Otsubo, A. Takahashi, T. Yanai, M. Nakano und H. Fukunaga. „Temperature Characteristics of a Fluxgate Current Sensor With Fe–Ni–Co Ring Core“. IEEE Transactions on Magnetics 51, Nr. 11 (November 2015): 1–4. http://dx.doi.org/10.1109/tmag.2015.2438541.

Der volle Inhalt der Quelle
APA, Harvard, Vancouver, ISO und andere Zitierweisen
46

Ponjavic, Milan, und Slavko Veinovic. „Low-power self-oscillating fluxgate current sensor based on Mn-Zn ferrite cores“. Journal of Magnetism and Magnetic Materials 518 (Januar 2021): 167368. http://dx.doi.org/10.1016/j.jmmm.2020.167368.

Der volle Inhalt der Quelle
APA, Harvard, Vancouver, ISO und andere Zitierweisen
47

Liu, Yang, Yuan Lin, Qinhong Lan, Dong F. Wang, Toshihiro Itoh und Ryutaro Maeda. „A high accuracy fluxgate DC current sensor applicable to two-wire electric appliances“. Microsystem Technologies 25, Nr. 3 (18.12.2018): 877–85. http://dx.doi.org/10.1007/s00542-018-4267-6.

Der volle Inhalt der Quelle
APA, Harvard, Vancouver, ISO und andere Zitierweisen
48

Wu, Yangjing, Mingji Zhang, Chengyuan Peng, Zehuang Zhang, Yichen He, Wenwei Zhang und Liang Chang. „A Vectorial Current Density Imaging Method Based on Magnetic Gradient Tensor“. Sensors 23, Nr. 13 (24.06.2023): 5859. http://dx.doi.org/10.3390/s23135859.

Der volle Inhalt der Quelle
Annotation:
Magnetic current imaging is deemed an emerging powerful technique for visualizing electrical currents in electronic devices. However, the existing magnetic-field-based Fourier Transform back-evolution method is limited by its mono-function of imaging the magnitude of current density in devices under test, and subject to background noise distortion. Here, we developed a novel vectorial current density imaging method based on the detection of the magnetic field gradient generated by current carrying conductors. A closed form solution of current density inversion was analytically derived and numerically verified. Experiments were conducted by scanning tri-axial fluxgate sensor over different shapes of electrical wires. The results show that a current density resolution of 24.15 mA/mm2, probe-to-sample separation of 2 mm, and spatial resolution of 0.69 mm were achieved over a maximum scanning area of 300 mm × 300 mm. Such a method is verified to be capable of simultaneously imaging both magnitude and directions of current density, which is a promising technique for in situ noninvasive inspection for the power electronic and semiconductor industry.
APA, Harvard, Vancouver, ISO und andere Zitierweisen
49

Tesfaye, T., M. S. Mohammed und K. Ki-Seong. „Improving Flaw Detection through Integration of a Novel Eddy Current Probe with Fluxgate Magnetic Sensor“. Physical Mesomechanics 24, Nr. 1 (Januar 2021): 98–106. http://dx.doi.org/10.1134/s1029959921010136.

Der volle Inhalt der Quelle
APA, Harvard, Vancouver, ISO und andere Zitierweisen
50

Shin, Kwang-Ho. „DC Bias Current Influence to the Sensitivity of Orthogonal Fluxgate Sensor Fabricated with NiZn Ferrite Core“. Journal of the Korean Magnetics Society 23, Nr. 3 (30.06.2013): 94–97. http://dx.doi.org/10.4283/jkms.2013.23.3.094.

Der volle Inhalt der Quelle
APA, Harvard, Vancouver, ISO und andere Zitierweisen
Wir bieten Rabatte auf alle Premium-Pläne für Autoren, deren Werke in thematische Literatursammlungen aufgenommen wurden. Kontaktieren Sie uns, um einen einzigartigen Promo-Code zu erhalten!

Zur Bibliographie