Um die anderen Arten von Veröffentlichungen zu diesem Thema anzuzeigen, folgen Sie diesem Link: Fázování.
Dissertationen zum Thema „Fázování“
Geben Sie eine Quelle nach APA, MLA, Chicago, Harvard und anderen Zitierweisen an
Machen Sie sich mit Top-50 Dissertationen für die Forschung zum Thema "Fázování" bekannt.
Neben jedem Werk im Literaturverzeichnis ist die Option "Zur Bibliographie hinzufügen" verfügbar. Nutzen Sie sie, wird Ihre bibliographische Angabe des gewählten Werkes nach der nötigen Zitierweise (APA, MLA, Harvard, Chicago, Vancouver usw.) automatisch gestaltet.
Sie können auch den vollen Text der wissenschaftlichen Publikation im PDF-Format herunterladen und eine Online-Annotation der Arbeit lesen, wenn die relevanten Parameter in den Metadaten verfügbar sind.
Sehen Sie die Dissertationen für verschiedene Spezialgebieten durch und erstellen Sie Ihre Bibliographie auf korrekte Weise.
1
Pochop, Zbyněk. „Měřicí systém pro laboratorní generátorové soustrojí“. Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2013. http://www.nusl.cz/ntk/nusl-220167.
Der volle Inhalt der QuelleAnnotation:
This Master thesis deals with the measurement and description of the synchronous generator , which is located in laboratories. First, the thesis deals with the theory of synchronous machines. This is followed by a detailed description of the involvement of laboratory genetatory unit. Subsequently, the work deals with the measurement of basic parameters of the synchronous machine and also quite thoroughly devoted to displaying transients at various levels on the digital oscilloscope. The dissertation aims to compare theoretical ideas with the measured results. Finally, it is shown what could be measured next to the generator set.
2
Horák, Ondřej. „Fázovací obvody s moderními funkčními bloky“. Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2009. http://www.nusl.cz/ntk/nusl-218030.
Der volle Inhalt der QuelleAnnotation:
The present thesis is focused on all pass filters. The principle of all pass filters, their properties, the design of nth degree of these circuits will be analysed in succession and then some of functional blocks, by which these structures can be made, will be described. After that, the allpass filters will be designed and simulated in program OrCAD PSpice. First of all, the analysis will be performed with ideal components, then with real components. After that, the sensitivity and tolerance analysis will be made and the influence of parasite effects on circuit parameters will be examined. Once the experiments are finished, the design of Printed Circuit Board's (PCB) will be realized. Circuit showing the best parameters will be chosen for the design.
3
Černý, Martin. „Úprava naftové elektrocentrály pro paralelní chod se sítí“. Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2021. http://www.nusl.cz/ntk/nusl-442793.
Der volle Inhalt der QuelleAnnotation:
This works applies the idea of adjustment an engine-generator, so it is possible to connect an engine-generator, or other type of a generator, to the electricity. Consequently, the machine can transform the power supply without an outage. This work concerns the complex approach, provides the descriptions of particular parts, sensors and active components of a motor-generator and includes the explanation of their function. Further research is focused on designing and drawing a plan with a choice of a control unit for the whole system. Finally, the work deals with the complex implementation and testing the machine in real operation.
4
Plotěná, Michaela. „Fázová separace v systému aminojíl-biopolymer“. Master's thesis, Vysoké učení technické v Brně. Fakulta chemická, 2017. http://www.nusl.cz/ntk/nusl-316185.
Der volle Inhalt der QuelleAnnotation:
The aim of this diploma thesis was to study the structure and to evaluate the properties of the hydrogel prepared by the interaction of the aminolclay with the biopolymer. Representatives of the biopolymers were selected from low to medium molecular weight sodium hyaluronate and sodium polystyrenesulfonate. On the basis of the experiments carried out, it was found that phase separation takes place only when the aminolclay interacts with medium molecular weight hyaluronan (MMW). In the experimental part, analyzes of this sample were carried out in order to determine the formation of phase-separated hydrogel by influencing the solution by ionic strength, investigation of hydrogel extinction in various organic solvents, stability of hydrogel under extreme temperature conditions, the effect of storage on its degradation, etc. Viscoelastic properties were experimentally proven by rheology and thermal analysis detected binding water. Inhibition of microorganisms was confirmed by antibacterial diffusion assays. All experiments were carried out for the use of the Aj-HyA hydrogel (MMW) in the field of medical applications, specifically for the modern method of wet wound healing of the skin.
5
Zikmund, Tomáš. „Měření rychlosti objektu pomocí Fourierovy transformace“. Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2008. http://www.nusl.cz/ntk/nusl-227884.
Der volle Inhalt der QuelleAnnotation:
This work deals with object speed measuring using image analysis method. The reader will become familiar with a mathematical theory upon which the method is based. The mathematical algorithm for obtaining the speed of a given object is illustrated. Furthermore, an original computer program has been developed and the results of real measuring are shown.
6
Prosser, Jan. „Lícování sekvencí sítnice pomocí fázové korelace“. Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2018. http://www.nusl.cz/ntk/nusl-378151.
Der volle Inhalt der QuelleAnnotation:
This master’s thesis is aimed at registration of frames of retinal fundus video using phase corre- lation. An introduction describes general research in topic of retinal fundus, eye movements, diff erent approaches for image registration, phase correlation and examples of phase corre- lation applications. The second, practical part of master’s thesis, is dedicated to description of the proposed algorithm for registration of frames of retinal fundus video. The description of the proposed algorithm is divided into three parts. First two parts describe how frames of retinal fundus video are rated in terms of suitability for registration. Third part describes image registration algorithm itself. In conclusion, the accuracy of algorithm and computational time are evaluated.
7
Páteček, Tomáš. „Most na rampě“. Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2015. http://www.nusl.cz/ntk/nusl-227659.
Der volle Inhalt der QuelleAnnotation:
The object of this diploma thesis is the design and review of a bridge on a ramp. The bridge is part of a junction between the expressway R35 and the highway D1. Three case studies were made. The bridge construction is solved as continuous beam with six spans. The resulting design was made of prestressed concrete according to valid standards. The gradual construction was taken into consideration.
8
Kůdelová, Tereza. „Fázové změny na povrchu tepelných výměníků s dutými vlákny“. Doctoral thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2018. http://www.nusl.cz/ntk/nusl-375535.
Der volle Inhalt der QuelleAnnotation:
The thesis focuses on the polymer hollow fibres heat exchangers. The main object of the research is the formation and process of condensation on the outer surface of fibres and the effect of phase change on the heat transfer. The study deals with the influence of the geometry of the heat exchnager on the heat transfer and the condensation process. Fatigue tests of polymeric hollow fibres exchangers are also part of the work. The work provides an overview of the possible use of such heat exchangers in industrial applications associated with condensation.
9
Hás, Jiří. „Generátor polyfázové modulace radarového signálu“. Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2009. http://www.nusl.cz/ntk/nusl-217798.
Der volle Inhalt der QuelleAnnotation:
The goal of the theses is to propose an idea for a generator of a radar polyphase modulated signal, that will operate at a frequency of 30 MHz. At the beginning of this project, an outline of the basic structure of the generator is proposed and a function of a programable logical perimeter is analyzed. This perimeter, together with an oscillator, generate two mutually phase-shifted rectangular pulses in its outputs. The shift phase of these two pulses is set by a program, and operated by single-chip processor. Those pulses are consequently converted to sinusoidal wave with the help of filters, and the required phase is chosen by the multiplexer, which is also operated by the processor. The phase modulation is realized this way. The output signal of the generator is radiopulse, which subpulses are phase modulated by the described method. Individual parts are solved analogously in this Theses.
10
Druckmüllerová, Hana. „Registrace obrazů pomocí fázové korelace“. Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2010. http://www.nusl.cz/ntk/nusl-229026.
Der volle Inhalt der QuelleAnnotation:
Tato práce se zabývá použitím fázové korelace k určení vzájemné rotace, změny měřítka a posunu mezi digitálními obrazy. Fázová korelace je založena na Fourierově transformaci, proto je popsána Fourierova transformace funkcí definovaných na R^2 i diskrétní Fourierova transformace funkcí definovaných na konečném počtu bodů {0, 1, ... , N-1}^2, kde N je přirozené číslo. Dále je pozornost věnována modifikacím fázové korelace, díky nimž metoda umožňuje nalezení parametrů podobnostní transformace i mezi obrazy, které mají vysoký dynamický rozsah a slabě patrné struktury, obsahují aditivní nebo impulzní šum a jsou pořízeny pomocí různých snímačů a optických soustav. Obsahem práce jsou i modifikace metody pro snímky sluneční koróny pořízené během úplných zatmění Slunce, což patří mezi nejobtížnější úlohy registrace obrazů.
11
Snopek, Jan. „Vliv lanthanoidů na fázové transformace vysokoteplotní supravodivé keramiky řady Bi“. Master's thesis, Vysoké učení technické v Brně. Fakulta chemická, 2009. http://www.nusl.cz/ntk/nusl-216487.
Der volle Inhalt der QuelleAnnotation:
The Bi2Sr2CaCu2O7+d, i.e. Bi2212 phase of bismuth derived high temperature superconductors (HTS), powder precursor were synthesized via sol – gel technique using ethylendiamintetraacetic acid (Chelaton II) as a chelating agent. Metal nitrate’s solutions were mixed with EDTA suspension. The pH value was adjusted to 9 by NH4OH by reason forming of stable metal’s complexes. The mixture was heated to 80 °C for gelation. Solution taken before solid gel was form is used for preparation of Bi2212 layer on to a-Al2O3 surface via spin coating deposition’s technique. Reactive powder used for bulk sample preparation was made by calcination (800 °C) of pyrolyzed xerogel (500 °C). Sintering in oxygen atmosphere was proceeding at temperature from 850 to 880 °C. Bulk sample properties were compared with sample prepared by common ceramic method. Simultaneous TG-DTA, IR spectroscopy and heating microscopy were used for sample characterization. Furthermore, construction of furnace for sintering in O2 atmosphere was described.
12
Šikula, Viktor. „Lícování snímků sítnice pomocí metody fázové korelace“. Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2011. http://www.nusl.cz/ntk/nusl-219201.
Der volle Inhalt der QuelleAnnotation:
This master thesis deals with retinal image registration using phase correlation technique. There are described properties of retinal images and modality of scanning. A geometrical transformation encompasing scale, rotation and translation between two retinal images is considered and the whole registration framework is described. There are used retinal images from fundus camera and scanning laser ophthalmoscope (SLO). In this thesis is described corresponding bifurcations detection using phase correlation and registration using second-order polynomial transformation. The results are subjectively and objectively verificated.
13
Jedlička, Petr. „Softwarový přijímač GNSS“. Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2020. http://www.nusl.cz/ntk/nusl-413152.
Der volle Inhalt der QuelleAnnotation:
The thesis deals with the analysis and the reception of the freely available signals of the navigation satellites in the L1 and E1 bands of the GPS and Galileo systems. The described signal reception sections include the process of the acquisition, the carrier frequency and phase synchronization and tracking, the spreading code phase tracking, the signal demodulation and the channel decoding. The simulation of the entire receiver is performed in MATLAB. The deeply analyzed signal reception component is the one responsible for the carrier phase and frequency synchronization and tracking. In that case, more methods and their comparison are usually listed. The signal reception component, which is responsible for the carrier phase and frequency tracking and the spreading code phase tracking, is also implemented in FPGA.
14
Burian, Tomáš. „Apodizace Braggových vláknových mřížek vyráběných UV expozicí přes fázovou masku“. Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2019. http://www.nusl.cz/ntk/nusl-399594.
Der volle Inhalt der QuelleAnnotation:
This thesis describes the problem of fiber gratings, focusing primarily on the use of Bragg's grids in the sensor. It describes the types of fiber mesh production, especially the method of writing with a phase mask. The next part deals with the possibilities of using apodization in fiber optic systems. It deals with the various functions that can be used to describe apodization. The following part describes the moire principle, especially the method of overlapping two phase masks with a different period.
15
Franke, Jakub. „Studium možností zmatňování povrchu pro účely 3D skenování“. Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2020. http://www.nusl.cz/ntk/nusl-417857.
Der volle Inhalt der QuelleAnnotation:
This diploma thesis deals with matte coatings for 3D scanning purposes. The coatings are made with spray gun which uses a vibrating membrane atomizer and air blow gun. A suspension of titanium dioxide and alcohol is used as a coating material. This thesis describes the effect of the spray gun process parameters on the deposited coatings. These include, for example type of the coating suspension or setup of the blow gun. Phase Doppler Anemometry was used to measure spray characteristics. Deposited coatings were measured with profilometer and scanned with 3D scanner to study their thickness and effect on the results of 3D reconstruction. The result of this work was the coating with thickness below 1 µm with good optical properties for 3D scanning purposes. Standard deviation of the captured point cloud from the reference plane was below 0.0011 mm.
16
Endstrasser, Zdeněk. „Kalibrace a interpretace obrazových dat měřených zařízením LEEM“. Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2021. http://www.nusl.cz/ntk/nusl-443243.
Der volle Inhalt der QuelleAnnotation:
This thesis deals with the software development to calibration and interpretation of image data measured by a LEEM device. As the imaging technique is uniquely suited for in-situ studies of surface dynamical processes, the attention is mainly paid to methods enabling the evaluation of measurement time series. The phase correlation method based on Fourier transform of images is proposed to temperature shift correction between consecutive frames. The thesis describes the methods of additive and impulse noise filtering, image visualization, the filtration of secondary electrons and the determination of I-V curves from measured image data. Implemented methods are described not only in terms of their mathematical origin, but also with emphasis on the revealing of critical aspects associated with their use. The thesis also focuses on the application of the created algorithm to image data capturing the spatial and temporal evolution of 4,4’-biphenyl-dicarboxylic acid surface phases induced by sample annealing. Based on these evaluations, a suitable procedure is then determined to perform accurate detection and compensation of temperature shift said.
17
Dejdar, Petr. „Grafické uživatelské rozhraní pro senzorické systémy“. Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2018. http://www.nusl.cz/ntk/nusl-377158.
Der volle Inhalt der QuelleAnnotation:
Master thesis is focused on creating graphical user interface for the sensorical system based on Phase-OTDR. Theoretical part describes optical fibers, explains the principle of Bragg gratings, their production and their use in sensors. Methods of optical fiber attenuation and phase OTDR measurement are also described. Other part is focused on LabVIEW programming software and utilization of sensorical system and its components. Practical part deals with the user interface itself, which consists of two tabs. The first tab is designed for evaluation and display of measured data. The second tab is used to control and set up system components. Both of these tabs are further subdivided into other subtabs. Regarding the conclusion, further development of the program and options of hardware replacement for improving this sensorical system in the future will be discussed.
18
Fabianová, Kateřina. „Magnetotransportní vlastnosti FeRh nanodrátů“. Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2018. http://www.nusl.cz/ntk/nusl-382269.
Der volle Inhalt der QuelleAnnotation:
Železo-rhodium (FeRh) je látka procházející magnetickou fázovou přeměnou prvního druhu z antiferomagnetické (AF) do feromagnetické (FM) fáze, ke které dochází při zahřátí materiálu nad teplotu fázové přeměny nebo působením dostatečně velkého magnetického pole. Tato fázová přeměna je mimo jiné provázena výraznou změnou entropie, magnetizace a elektrického odporu, přičemž její tvar a poloha teploty přeměny je silně závislá na stechiometrii krystalu, na příměsích, tlaku a v případě tenkých vrstev na napjatosti vrstvy způsobené substrátem. Tato práce se zaměřuje na studium magnetotransportních vlastností drátů připravených z tenkých FeRh vrstev rostlých na substrátech indukujících různou napjatost vrstvy. Jedním z hlavních jevů studovaných v této práci je anizotropní magnetorezistance (AMR) projevující se změnou odporu pro různé natočení magnetických momentů v látce vůči směru elektrického proudu. AMR byla studována jak ve FM fázi, tak i v AF fázi FeRh. Byla změřena hodnota AMR ve vysokoteplotní FM fázi a objeveno neočekávané chování AMR ve zbytkové FM fázi v nízkoteplotním stavu. Dále byla pozorována výrazná závislost AMR na orientaci měřených segmentů vůči krystalografickým směrům FeRh.
19
Šebek, Jan. „Studium pasivní stabilizace teploty kompozitních stavebních materiálů“. Master's thesis, Vysoké učení technické v Brně. Fakulta chemická, 2010. http://www.nusl.cz/ntk/nusl-216639.
Der volle Inhalt der QuelleAnnotation:
The topic of presented master’s thesis was study of passive stabilization of building materials temperature. The main goal of this thesis was measuring and characterization of the thermal properties of building materials, which are used to PCM technology. PCM technology is based on utilization of latent heat of phase change. At the beginning of this thesis it was needed to define physical principle of phase change, then the most usable PCM chemicals (e.g. paraffin, Glauber’s salt, hexahydrate calcium chloride) and their basic physical properties (especially thermo-physical), background research of building materials with PCM and also the methods of thermo-physical properties measurement. It was also needed to characterize measured building materials and define theirs thermal parameters; because the values of thermal parameters of measured samples were compared to these values. In the experimental part of my thesis are measurements of material thermal analysis, which are methods, where the properties of materials are studied as they change with temperature. I had used to differential scanning calorimetry, transient pulse method and other methods, which are usable for thermo-physical properties measuring and characterization. I have been much interested in properties of measured material, which were specific heat capacity, temperature diffusivity, heat conductivity and phase change temperature (the melting point of PCM). At the end of my thesis the findings of all methods were finally summarized, compared and commented.
20
Meduňa, Tomáš. „Numerické metody zpracování obrazů z kosmické sondy NASA SDO“. Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2020. http://www.nusl.cz/ntk/nusl-417136.
Der volle Inhalt der QuelleAnnotation:
Tato práce se zabývá zpracováním snímků Slunce pořízených kosmickou sondou SDO na různých vlnových délkách a vizualizací výskytu třikrát ionizovaného uhlíku C IV jejich vhodným složením. V práci jsou uvedeny základní informace o Slunci a jeho atmosféře, dále je shrnuta potřebná teorie a možné postupy vizualizace, které jsou následně vyhodnoceny a porovnány. Součástí je i vytvořený program pro snadnou tvorbu snímků vizualizujících uhlík C IV.
21
Kroupa, Martin. „Analýza změny zátěže asynchronního motoru z měření statorových proudů“. Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2015. http://www.nusl.cz/ntk/nusl-221189.
Der volle Inhalt der QuelleAnnotation:
This thesis is focused on the evaluation of rotor dynamics of the induction machine, which can be used as a basis for online diagnosis of driven load in the future. It describes the problem of time varying loading torque at its impact to electromagnetic variables in induction machine. Followed by the possible ways of monitoring and diagnostic of loading torque using Fourier analysis on supply current.
22
Mlčoch, Jiří. „Koincidenční detektor FM - laboratorní přípravek“. Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2009. http://www.nusl.cz/ntk/nusl-217993.
Der volle Inhalt der QuelleAnnotation:
This work is aimed at an analysis of frequency demodulation, design, simulation, and construction of a coincidence demodulator. Chapter 1 explains the basic characteristics of frequency modulated (FM) signals and provides an overview of the required signal bandwidth, the signal spectrum, and the signal-to-noise ratio after demodulation. Chapter 2 describes each type of FM demodulator separately, and it includes all significant types of demodulator for FM radio broadcast. The function of the coincidence demodulator and its characteristics are explained in detail. Chapter 3 contains a theoretical solution of the phase shift network. Calculated values of the circuit elements are verified by simulation with a view to the total harmonic distortion of the demodulator output signal. Chapter 4 describes the front-end circuit of the receiver. Here, the filter design and the mixer circuit description are provided. The final part of the thesis presents the applicable laboratory task.
23
Novotný, Zbyněk. „Elipsometrie tenkých vrstev“. Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2010. http://www.nusl.cz/ntk/nusl-229122.
Der volle Inhalt der QuelleAnnotation:
Diploma thesis deals with ageing process of thin films of Co and Cu on Si substrate, prepared by the IBAD method. The process of film ageing, which depends on time of exposition to the atmosphere at room conditions, was investigated with spectroscopic ellipsometry (VIS+UV) and atomic force microscopy. In case of thin Co films, approximately four days long incubation period was observed. During this time period, a change in the optical parameters of the film occurs without a measurable change of the film topography. Using non-contact atomic force microscopy, a growth of the transitional film in the island growth regime was observed. During the ageing of thin Cu films, two stages of growth of the transitional layer were observed - nucleation stage and growth stage. Both of these time periods of the transitional layer growth show direct logarithmic dependence. Using non-contact atomic force microscopy, the growth of the transitional film was observed. Using atomic force microscopy in non-contact regime, time dependent measurement was done and the process of forming of one monolayer of the transitional layer was documented. Within the diploma thesis, a series of experiments on ultra high vacuum system were performed in order to investigate phase transformation of thin Fe films (22 monolayers) on Cu(100) stabilized by CO absorption. The transformation from fcc phase to bcc phase was induced by Ar+ ion beam bombardment with the ion energy in the range (0.5-4) keV. The process of phase transformation was observed by surface magneto-optic Kerr effect, Auger electron spectroscopy and low energy electron diffraction.
24
Fikar, Ondřej. „Ab initio výpočty křivek rozpustnosti tuhých roztoků“. Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2019. http://www.nusl.cz/ntk/nusl-400461.
Der volle Inhalt der QuelleAnnotation:
This diploma thesis is focused on a theoretical study of the phase stability of solid solutions in selected aluminium and silver alloys. The ab initio calculations were performed using projected augmented waves method and the thermal dependencies of thermodynamic quantities were acquired using phonon calculations. The main focus of this work is the of aluminium-germanium alloy, while the other examined alloys (Al-Pb, Ag-Ge and Ag-Pb) serve the purpose of comparison of the solid solubility prediction and its reliability in systems with different composition. The temperatures, at which the solid solutions become stable, were evaluated using the energy difference between possible states and this evaluation was carried out for different contributions to the total energy. Also the electronic and phonon densities of states were calculated for all pure elements and solid solutions. The temperatures of solubility were compared to the experimental ones provided by the CALPHAD method and the individual contributions to the total energy were determined and depicted. The results obtained in this work tend to underestimate temperatures of solubility of individual solid solutions by hundreds of Kelvin.
25
Pavlík, Dušan. „Ultrazvukový měřič rychlosti toku krve“. Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2011. http://www.nusl.cz/ntk/nusl-219209.
Der volle Inhalt der QuelleAnnotation:
This thesis deals with ultrasound blood flow meter design with emphasis on practical implementation of such device. This medical device is used in ultrasound diagnostic, especially for measuring direction and velocity of blood flow in superficial vessels. This thesis contains consecutive design including description of individual function blocks. Documents for making double-sided printed circuit are included as well.
26
Zálešák, Martin. „Optimalizace návrhu solárního kolektoru využívající latentní teplo fázové přeměny“. Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2018. http://www.nusl.cz/ntk/nusl-382272.
Der volle Inhalt der QuelleAnnotation:
The thesis deals with the creation for a numerical model of a solar collector with a phase change material as a heat storage medium. The model was implemented in Python. Using the created model, design optimization of several problems was carried out with the use of selected methods of heuristic optimization. The results of the behaviour of the created model and of design optimization were then analysed and evaluated.
27
Novák, Pavel. „Úzkopásmový PLC modem“. Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2016. http://www.nusl.cz/ntk/nusl-242170.
Der volle Inhalt der QuelleAnnotation:
The theses is focused on the use of PLC technology. The aim of the thesis is creating device which communicates in a narrowband transmission frequency band. Transmission of communication between plc elements runs through the low voltage distribution network. The frequency and phase modulations are used in order to change the character of data signal. Transmitter and receiver parameters are subjects to the CENELEC standard. The theses gives more attention to the area of hardware build communication element rather than the area of programming.
28
Vraňáková, Sofia. „Zpracování snímků sítnice s vysokým rozlišením“. Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2021. http://www.nusl.cz/ntk/nusl-442580.
Der volle Inhalt der QuelleAnnotation:
Diplomová práca je zameraná na spracovávanie obrazov sietnice s vysokým rozlíšením. Cieľom práce je zlepšiť výslednú kvalitu výsledných snímkov sietnice získaných zo sekvencie snímkov nižšej kvality. Jednotlivé snímky sú najskôr spracované pomocou bilaterálnej filtrácie a zlepšenia kontrastu. v ďalšom kroku sú odstránené rozmazané snímky a snímky zobrazujúce iné časti sietnice. Posun medzi jednotlivými snímkami v sekvencii sa odhaduje pomocou fázovej korelácie, a tieto obrazy sú potom fúzované do výsledného snímku s vysokým rozlíšením pomocou priemerovania a využitia superrozlišovacej techniky, presnejšie regularizácie pomocou bilaterálneho celkového rozptylu. Výsledné mediánové hodnoty skóre kvality získaných obrazov sú PIQUE 0.2600, NIQE 0.0701, a BRISQUE 0.3936 pre techniku priemerovania, a PIQUE 0.1063, NIQE 0.0507, and BRISQUE 0.1570 pre superrozlišovaciu techniku.
29
Janda, Ondřej. „Zpracování obrazu mikroskopických vzorků“. Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2009. http://www.nusl.cz/ntk/nusl-228411.
Der volle Inhalt der QuelleAnnotation:
This diploma thesis deals with image processing of microbiological data. Firstly the brief introduction to biological basics is given. Secondly we take focus on basic and used image processing methods. Integral part of this thesis is working application witch uses image processing methods on input data. Creating user interface for this application is also part of this work. Documentation is provided.
30
Bičan, Jan. „Vliv polohy reproduktorů na charakteristiky reproduktorové soustavy“. Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2021. http://www.nusl.cz/ntk/nusl-449405.
Der volle Inhalt der QuelleAnnotation:
This thesis deals with the measurement and description of properties of the two-way variable modular loudspeaker system marked as OM-3, especially the influence of the mutual position of drivers on its characteristics. The thesis examines individual factors taking their contribution on characteristics of the loudspeaker system in total. Further it measures and evaluates options of compensations of mutual position changes of drivers using an all-pass filter. Within this thesis is also included laboratory task preparation which is focused on this problematics.
31
Petrášová, Anna. „Počítačové modelování teplotní hystereze při změně skupenství“. Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2021. http://www.nusl.cz/ntk/nusl-445463.
Der volle Inhalt der QuelleAnnotation:
This thesis deals with computer modeling of temperature hysteresis during phase change, namely complete and partial phase change. There is performed a review of methods for modeling temperature hysteresis based on the enthalpy method and the effective heat capacity method. In the case of complete phase change, there are several methods that use the effective heat capacity method, as well as the heat source method, which, on the contrary, is a certain analogy of the enthalpy method. The following are works dealing with modelling of partial phase change, the most interesting of which is due to the validation method of static hysteresis and the method designed by Bony and Citherlet. The second part of this thesis deals with the hysteresis behavior of the material with phase change, which is organic paraffin RT 27. The input data obtained by differential scanning calorimetry was converted to the dependence of the enthalpy on temperature. These curves was represented by piecewise linear function. In the case of partial phase transformations, a modeling method based on the methods proposed by Bonym and Citherlet was designed. An one-dimensional model enabling thermal simulation of the material was implemented in the MATLAB software environment. The results obtained with this simulation are finally compared with a model that does not consider thermal hysteresis.
32
Jakl, Oldřich. „Použití termovizní kamery v měřicí technice“. Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2013. http://www.nusl.cz/ntk/nusl-220181.
Der volle Inhalt der QuelleAnnotation:
This diploma thesis is focused on using infrared camera within methods of active thermography. The first part of work is an introduction to the passive and active thermography; and about four basic methods of active thermography: step heating themography, Lock-in thermography and pulse phase thermography. The second part is a proposal of experimental working place. There are also presented results of practical implementation pulse and pulse phase methods tested for application of detection of subsurface defect.
33
Novák, Kamil. „Analýza vlivu uspořádání kolagenu na mechanické vlastnosti tepen“. Doctoral thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2018. http://www.nusl.cz/ntk/nusl-383532.
Der volle Inhalt der QuelleAnnotation:
This dissertation thesis concerns with Analysis of Influence of Collagen Organization on Mechanical Properties of Arteries and it is divided into three main parts. Motivation for this dissertation thesis was in a study reviewing effect of material model upon resulting stresses in AAA. The effect was calculated in 70 patient-specific geometries of AAA, which exceeds the number of geometries in other scientific papers by one order. Within this study, two material models were used, i.e. real one and 100× stiffer, and obtained stresses were mutually compared. It was quantified that peak stress difference can be higher than 20 % in 10% of patients and therefore the real material model should be preferred over the artificial one although operation with this model is more demanding. The second part of this thesis deals with an identification of structural parameters (orientation and dispersion of collagen fibres) of porcine aortic tissue by using adjusted Fast Fourier Transform based algorithm. The extracted structural parameters were inserted into two-layer structure-motivated constitutive model Martufi-Gasser. This model was validated and its predictive capabilities were also tested with fine results. The most important information obtained from the digital image processing of ~9000 micrographs is existence of only one family of dispersed collagen fibres which breaks the current dogma present in many scientific papers about two families of collagen fibres. The third part concerns with a proposal of an automated phase-correlation based algorithm for obtaining collagen fibre direction from polarized light microscopy images. The proposed algorithm was verified and validated and it yields histograms of collagen fibre directions with overall number of measured points larger than it would be possible to get from any manual measurement. The limitation of the original proposed algorithm is in 90° period of polarized light intensity, thus the method results in angles in the range of 0°–90. Therefore the end of the thesis is dedicated resolving this problem and obtaining real angles in a span of 0°–180°. To this end, the microscope set-up was changed and the algorithm was adjusted accordingly. The original and the adjusted algorithms are collagen-specific, fast and an operator independent. Despite all the author´s effort put into collagen fibre waviness quantification directly from the histograms, the waviness has not been quantified yet in this way and it remains at the stage of research.
34
Jaskowiec, Jiří. „Vliv prostorového omezení na vlastnosti metamagnetických nanostruktur“. Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2019. http://www.nusl.cz/ntk/nusl-402581.
Der volle Inhalt der QuelleAnnotation:
Silné prostorové omezení materiálů způsobuje jejich nové vlastnosti, které mohou najit uplatnění v mnoha vědeckých i technických odvětvích. Snaha zmenšit velikosti součástek, zvětšit hustotu zápisu a zefektivnit procesy je současným trendem elektronického průmyslu. V této práci je studován vliv prostorového omezení na vlastnosti metamagnetického železo-rhodia (FeRh) během fázové přeměny. FeRh je materiál vykazující fázovou přeměnu prvního druhu mezi antiferomagnetickou a feromagnetickou fází. Metodou mikroskopie magnetických sil v magnetickém poli kolmém na rovinu vzorku je zobrazeni a analyzována struktura fázových domén behem fázové přeměny. Kvantitativní analýza naměřených dat je provedena užitím výškové korelační funkce a její výsledky jsou porovnány pro různé velikosti struktur a tloušťky tenkých vrstev.
35
Húserka, Jozef. „Návrh reverberátoru pro simulaci akustiky prostoru“. Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2014. http://www.nusl.cz/ntk/nusl-220649.
Der volle Inhalt der QuelleAnnotation:
This thesis deals with artificial simulation of acoustic spaces by using reverberators. Output of this document consists of four reverberation algorithms and function that evaluates objective parameters of acoustic space from impulse responses. Reverberators and script were implemented using Matlab. Graphical user interface is used to present all of the algorithms for easier usability. First chapter deals with objective parameters of acoustic spaces and the ways they are computed from impulse response. Second chapter describes various structures which are used to build reverberators. Those structures are used in third chapter in implementations of reverberators. Third chapter also compares all implemented reverberators . In last chapter experiment was made. Impulse responses of three spaces were measured and subsequently aproximated by algorithms implemented in this thesis.
36
Kalina, Ladislav. „Obvody pro tvarování svazku antény v pásmu L“. Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2017. http://www.nusl.cz/ntk/nusl-316448.
Der volle Inhalt der QuelleAnnotation:
This thesis contains design of beamforming network designed for passive radar antennas. The first part contains theory of passive radars and beamforming networks. The next part implies design of beamforming network at the block digram level. Then are choosed circuits for amplitude and phase control, including the design of control communication. It follows by realization of IQ phase shifter and his automatic measurement. Based on this results is phase shifter adjusted and PCB of 2x2 beamforming network is designed. Last part includes design of control application (Matlab) and control program for STM32F407VG microcontroller.
37
Gric, Pavel. „Analýza konzolového vyložení administrativní budovy“. Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2015. http://www.nusl.cz/ntk/nusl-227745.
Der volle Inhalt der QuelleAnnotation:
This diploma thesis is about analysis of post-tensioned cantilever beam, which is part of cantilever of commercial building. The main part of thesis is evaluation of behavior of building structure in time and determination of the most suitable staging. Next part of thesis is design and evaluation of reinforced slab and beam.
38
Šilhavý, Miroslav. „Vliv lanthanoidů na fázové transformace vysokoteplotní supravodivé keramiky řady Bi“. Master's thesis, Vysoké učení technické v Brně. Fakulta chemická, 2010. http://www.nusl.cz/ntk/nusl-216640.
Der volle Inhalt der QuelleAnnotation:
The thesis is focused on high-temperature superconducting (HTS) ceramics series of bismuth. Specifically, there is studied Bi2Sr2CaCu2O8+x phase, known as the 2212 phase. The theoretical part describes the basic properties of superconductivity and superconductors, the properties of cuprate ceramics and description of LBCO, YBCO and BSCCO structures. The experimental part deals with the preparation of the precursor own Bi-2212 phase. It is synthesized by a process called sol-gel. Feedstock Bi2O3, CaCO3, SrCO3 and CuSO4 was dissolved in HNO3 and transferred to a complex with ethylenediaminetetraacetic acid (EDTA, Chelaton II). With NH3 pH > 9 was maintained due to the stability of complex. The obtained gel was concentrated, calcinated in a furnace at 860 °C and crushed into powder. Pure powder was subjected to analysis dipping microscope, SEM, XRD, FT-IR, TG-DTA at different atmospheres argon, oxygen and air. Then 1 wt.% of the oxide (La, Y, Sc, Sm) was added to part of the powder precursor and the samples were examined using TG-DTA.
39
Jeleček, Jiří. „Pseudo-diferenční kmitočtové filtry vyššího řádu“. Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2019. http://www.nusl.cz/ntk/nusl-401954.
Der volle Inhalt der QuelleAnnotation:
This Master's thesis deals with pseudo-differential frequency higher order filters working in voltage mode. The thesis deals with the description of frequency filters, their types and applications. Follows an analysis of differential and pseudo-differential transmissions. Next part contains a description of used active elements (conveyors) at thesis (CCII, DVCC, DDCC, UCC). In the last part the thesis is devoted to the own design of the pseudo-differential filter. Design functionality is verified by experimental simulation.
40
Poukar, Kryštof. „Návrh mostní konstrukce v Blansku“. Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2016. http://www.nusl.cz/ntk/nusl-240286.
Der volle Inhalt der QuelleAnnotation:
This diploma thesis deals with the proposal of a single box girder bridge of three spans in the town Blansko. It bridges the river Svitava and the main railway Praha - Brno. The calculations were carried out by hand, the model was created in the Scia Engineer programme. The thesis also describes the solving of a complicated phased construction with the necessity of turning the bridge into the final position. The construction is considered by Eurocodes.
41
Bárta, Jakub. „Implementace tvarování anténních příjmových svazků radaru v FPGA“. Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2019. http://www.nusl.cz/ntk/nusl-400718.
Der volle Inhalt der QuelleAnnotation:
At the begining of this thesis radar theory and classification of radar systems is explained. Next part introduces antenna arrays with it’s parameters and possibilities. Main part contains design of digital beamformer on FPGA Cyclone V and it’s validation.
42
Vašíček, David. „Fluorescenční zobrazovací techniky v multimodálním holografickém mikroskopu“. Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2014. http://www.nusl.cz/ntk/nusl-231466.
Der volle Inhalt der QuelleAnnotation:
The diploma thesis deals with the registration of images taken with the multimodal holographic microscope (MHM). The summary covers the fluorescent and holographic microscopy, and the multimodal holographic microscope combining both these microscopy types. Every pair of the images needs to be aligned in order to gain new information by combining both image types. The thesis contains an algorithm that registers images by phase correlation as well as a process created in MATLAB in accordance with the algorithm. The most important procedure parameters’ influence on the registration success is described and the results are annotated.
43
Jech, David. „Příprava a strukturní stabilita nanokrystalických tepelných bariér“. Doctoral thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2018. http://www.nusl.cz/ntk/nusl-391813.
Der volle Inhalt der QuelleAnnotation:
Complex thermal barrier coating systems are one the most efficient high-temperature surface treatments which open up practical applications in land-based turbines and air jet engines. In the case of most exposed rotor and stator jet engine components, the combination of thermal barrier coatings together with the inner cooling system made it possible to increase working temperature by several tens of degrees of Celsius. Nevertheless, it is very difficult to achieve any further increase in working temperature by using the conventional thermal barrier coatings based on the ZrO2-Y2O3 ceramic top coat and the MCrAlY metallic bond coat, which currently work at their material limits. The working temperature inside the combustion chamber of the jet engine is proportional to engine’s efficiency and inversely proportional to fuel consumption and production of undesirable CO2 emission. Therefore, a considerable effort has recently been devoted to research and development of new types of ceramic coatings that can withstand long term extreme working conditions. New design approaches of multi-layer composite thermal barrier coating systems can sustain the required trend of increasing working temperature of jet engines mainly because of possibility of optimization of high-temperature durability and long lifetime. The theoretical part of thesis provides a fundamental overview of thermal barrier coatings, their properties, deposition technologies and testing methods. The experimental part is focused on optimization of deposition parameters of conventional ZrO2-Y2O3 / MCrAlY thermal barrier coatings prepared by means of atmospheric plasma spraying. Furthermore, a novel multi-layer thermal barrier coating system based on ZrO2-Y2O3-Al2O3-SiO2 / ZrO2-Y2O3 / MCrAlY, which contains amorphous and/or nanocrystalline regions, is developed, tested and characterized as well. Structural stability, phase transformations and growth of the thermally grown oxide in both conventional and experimental systems after high-temperature isothermal oxidation, cyclic oxidation and burner-rig tests were evaluated by means light microscopy, scanning electron microscopy with energy-dispersive microanalysis and X-ray diffraction. In comparison with the conventional thermal barrier coatings, the novel multi-layered systems have lower thermal conductivity, slower thermally grown oxide kinetic, better structural stability, and generally higher lifetime in all high-temperature tests.
44
Křižáková, Viola. „Excitace a šíření spinových vln v magnonických krystalech připravených přímým zápisem fokusovaným iontovým svazkem“. Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2018. http://www.nusl.cz/ntk/nusl-382268.
Der volle Inhalt der QuelleAnnotation:
Paramagnetické niklem stabilizované tenké vrstvy plošně centrovaného kubického Fe, epitaxně narostené na monokrystalickém substrátu Cu(100) jsou známy svou schopností strukturní a magnetické fázové přeměny při ozáření iontovým svazkem, a to do prostorově centrované kubické struktury charakteristické feromagnetickými vlastnostmi. Monokrystalický Cu(100) substrát je možné také nahradit Si(100) s mezivrstvou Cu(100). Pomocí fokusovaného iontového svazku lze dále snadno lokálně modifikovat magnetické vlastnosti ozařované vrstvy. Tato metoda přímého zápisu magnetických struktur je alternativou k běžným litografickým technikám, nabízející nové jimi nedosažitelné možnosti. Připravené magnetické struktury následně využíváme k propagaci spinových vln. V práci je představen celý proces od růstu vrstev, přes přípravu mikrostruktur, až po studium jejich struktury a statických i dynamických magnetických vlastností. S využitím vektorového síťového analyzátoru studujeme ve vrstvách a v mikrostrukturách připravených fokusovaným iontovým svazkem feromagnetickou rezonanci a propagující se spinové vlny. Zdrojem spinových vln o definovaných vlnových vektorech jsou litograficky připravené koplanární vlnovody, sloužící také k induktivní detekci vln. Pomocí feromagnetické rezonance kvantitativně určujeme materiálové charakteristiky jako jsou saturační magnetizace a parametr útlumu a ze spekter propagujících módů následně určujeme charakteristiky spinových vln, které porovnáváme s dalšími feromagnetickými materiály.
45
Pelikán, Adam. „Střecha plaveckého stadionu“. Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2014. http://www.nusl.cz/ntk/nusl-226932.
Der volle Inhalt der QuelleAnnotation:
This diploma thesis is about designing the structure of roof of swimming stadium. Three solutions are created - concrete arc with tie, steel truss slab and concrete pretensioned membrane. One choosed solution - concrete pretensioned membrane - is afterwards developed. In the beginning there are several designs of geometry fulfilling the requirements for given type of structure being created. In part of static calculation, the parametrical mathematical model in form of macro in APDL language for Ansys software has been created. Afterwards all the parameters (initial state of cables, level of pretension, dimensions of membrane and peripheral frame, etc.) has been optimized in order to the membrane be fulfilling criterias for ultimate limit state and serviceability limit state. Afterwards other selected parts of structure has been checked. On basis of designed geometry and design checks in static calculation the drawings of conctruction and designed parts has been created. In the end, the 3D model of the structure has been created in graphical software Rhinoceros. Then visualizations of structure in concstruction stages and after completion has been rendered.
46
Shaktour, Mahmoud. „Nekonvenční obvodové prvky pro návrh příčkových filtrů“. Doctoral thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2011. http://www.nusl.cz/ntk/nusl-233531.
Der volle Inhalt der QuelleAnnotation:
Kmitočtové filtry jsou lineární elektrické obvody, které jsou využívány v různých oblastech elektroniky. Současně tvoří základní stavební bloky pro analogové zpracování signálů. V poslední dekádě bylo zavedeno množství aktivních stavebních bloků pro analogové zpracování signálů. Stále však existuje potřeba vývoje nových aktivních součástek, které by poskytovaly nové možnosti a lepší parametry. V práci jsou diskutovány různé aspekty obvodů pracujících v napěťovém, proudovém a smíšném módu. Práce reaguje na dnešní potřebu nízkovýkonových a nízkonapěťových aplikací pro přenosné přístroje a mobilní komunikační systémy a na problémy jejich návrhu. Potřeba těchto výkonných nízkonapěťových zařízení je výzvou návrhářů k hledání nových obvodových topologií a nových nízkonapěťových technik. V práci je popsána řada aktivních prvků, jako například operační transkonduktanční zesilovač (OTA), proudový konvejor II. generace (CCII) a CDTA (Current Differencing Transconductance Amplifier). Dále jsou navrženy nové prvky, jako jsou VDTA (Voltage Differencing Transconductance Amplifier) a VDVTA (Voltage Differencing Voltage Transconductance Amplifier). Všechny tyto prvky byly rovněž implementovány pomocí "bulk-driven" techniky CMOS s cílem realizace nízkonapěťových aplikací. Tato práce je rovněž zaměřena na náhrady klasických induktorů syntetickými induktory v pasivních LC příčkových filtrech. Tyto náhrady pak mohou vést k syntéze aktivních filtrů se zajímavými vlastnostmi.
47
Stýblo, Jakub. „Obnova areálu Tasovického mlýna“. Master's thesis, Vysoké učení technické v Brně. Fakulta architektury, 2015. http://www.nusl.cz/ntk/nusl-216127.
Der volle Inhalt der QuelleAnnotation:
The proposal focuses on phasing scenario and identify how to treat the monument intact, but she fully exploit the current way. These phases are hierarchically established, without continuing into the next stage. Because the mill building to respond flexibly to the specific needs of communities. The concept is based on the gradual additive laminate and function. Layering and arise solely the premises, but also the interconnections, which between them generate more interaction. Each material has its own particular character and its own hierarchy towards other functional masses.
48
Kozubík, Lukáš. „Návrh a optimalizace tlumiče teplotních fluktuací využívající latentní teplo fázové přeměny“. Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2018. http://www.nusl.cz/ntk/nusl-392834.
Der volle Inhalt der QuelleAnnotation:
The goal of this master’s thesis is creating a model of the attenuation of the fluid temperature fluctuations using methods described in the thesis. PCM is used to attenuation of fluctuations. This thesis is example of utilization PCM in technical practice. Numerical calculation of PCM phase change uses the method of effective heat capacity and enthalpy method. A part of this thesis also forms a theoretical basis for heat transfer described by differential equations. The final part of the thesis is dedicated to the optimization of the model and the description of the optimization methods.
49
Novotný, Jakub. „Behaviorální modely aktivních prvků s nezávislým víceparametrovým elektronickým řízením“. Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2016. http://www.nusl.cz/ntk/nusl-241053.
Der volle Inhalt der QuelleAnnotation:
This thesis is focused on behavioral modelling of active elements with independent multi-parameter electronic control using comercially available components. In a first part of the thesis, CVDIBA, CVDOBA, CVCC and OC elements are discussed. The functionality is verified by simulations using OrCAD PSpice. Used components are diamond transistor OPA860, variable gain amplifier LMH6505, differencing amplifier AD830, low distortion differential driver AD8138, current conveyor EL2082 and current mode four quadrant multiplier EL4083. Four active elements are further built on PCB and measured. Some applications like low pass filter, high pass filter, all pass filter and reconfigurable filter.
50
Sládok, Ondřej. „Diferenční a pseudodiferenční kmitočtové filtry“. Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2016. http://www.nusl.cz/ntk/nusl-241951.
Der volle Inhalt der QuelleAnnotation:
This thesis deals with fully differential and pseudo-differential frequency filters. Significant emphasis is placed on the characteristics of common-mode signal. Further, the text deals with the design issue of fully-differential structure and transformation of non-differential to pseudo-differential structures. In the thesis one non-differential structure, one fully-differential and three pseudo-differential structures are proposed, one of them working in current mode. The thesis also describes the analysis from the perspective of non-ideal properties of the active element of two circuit solutions, which is trying to find the optimal solution. In each case, functionality of new solutions is verified by simulations and in several cases also by experimental measurement.