Auswahl der wissenschaftlichen Literatur zum Thema „Fabrication additive indirecte“
Geben Sie eine Quelle nach APA, MLA, Chicago, Harvard und anderen Zitierweisen an
Inhaltsverzeichnis
Machen Sie sich mit den Listen der aktuellen Artikel, Bücher, Dissertationen, Berichten und anderer wissenschaftlichen Quellen zum Thema "Fabrication additive indirecte" bekannt.
Neben jedem Werk im Literaturverzeichnis ist die Option "Zur Bibliographie hinzufügen" verfügbar. Nutzen Sie sie, wird Ihre bibliographische Angabe des gewählten Werkes nach der nötigen Zitierweise (APA, MLA, Harvard, Chicago, Vancouver usw.) automatisch gestaltet.
Sie können auch den vollen Text der wissenschaftlichen Publikation im PDF-Format herunterladen und eine Online-Annotation der Arbeit lesen, wenn die relevanten Parameter in den Metadaten verfügbar sind.
Zeitschriftenartikel zum Thema "Fabrication additive indirecte"
Li, Yan, Dichen Li, Bingheng Lu, Dajing Gao und Jack Zhou. „Current status of additive manufacturing for tissue engineering scaffold“. Rapid Prototyping Journal 21, Nr. 6 (19.10.2015): 747–62. http://dx.doi.org/10.1108/rpj-03-2014-0029.
Der volle Inhalt der QuelleTony, Anthony, Ildiko Badea, Chun Yang, Yuyi Liu, Garth Wells, Kemin Wang, Ruixue Yin, Hongbo Zhang und Wenjun Zhang. „The Additive Manufacturing Approach to Polydimethylsiloxane (PDMS) Microfluidic Devices: Review and Future Directions“. Polymers 15, Nr. 8 (18.04.2023): 1926. http://dx.doi.org/10.3390/polym15081926.
Der volle Inhalt der QuelleRomani, Alessia, Stefan Caba, Raffaella Suriano und Marinella Levi. „Recycling Glass and Carbon Fibers for Reusable Components in the Automotive Sector through Additive Manufacturing“. Applied Sciences 13, Nr. 10 (09.05.2023): 5848. http://dx.doi.org/10.3390/app13105848.
Der volle Inhalt der QuelleAizat, M., und S. F. Khan. „Fabrication of mandible fracture plate by indirect additive manufacturing“. Journal of Physics: Conference Series 908 (Oktober 2017): 012063. http://dx.doi.org/10.1088/1742-6596/908/1/012063.
Der volle Inhalt der QuelleKhan, S. F., Kenneth W. Dalgarno und Rakhmad Arief Siregar. „Indirect Additive Manufacturing (AM) of Apatite-Wollastonite (A-W) Glass-Ceramic for Medical Implants“. Applied Mechanics and Materials 786 (August 2015): 354–60. http://dx.doi.org/10.4028/www.scientific.net/amm.786.354.
Der volle Inhalt der QuelleGreeff, G. P. „Material Flow Rate Estimation in Material Extrusion Additive Manufacturing“. NCSL International measure 13, Nr. 1 (2021): 46–56. http://dx.doi.org/10.51843/measure.13.1.5.
Der volle Inhalt der QuelleKalman, Les, und Lyndsay Desimone. „A novel workflow for indirect cobalt-chromium restorations using additive manufacturing without digital design“. Journal of Dental Research, Dental Clinics, Dental Prospects 15, Nr. 3 (25.08.2021): 147–51. http://dx.doi.org/10.34172/joddd.2021.025.
Der volle Inhalt der QuelleHe, Rujie, Niping Zhou, Keqiang Zhang, Xueqin Zhang, Lu Zhang, Wenqing Wang und Daining Fang. „Progress and challenges towards additive manufacturing of SiC ceramic“. Journal of Advanced Ceramics 10, Nr. 4 (18.07.2021): 637–74. http://dx.doi.org/10.1007/s40145-021-0484-z.
Der volle Inhalt der QuelleKhan, Shah Fenner, M. J. German und K. W. Dalgarno. „Indirect Additive Manufacturing Processing of Poly-Lactide-co-Glycolide“. Applied Mechanics and Materials 754-755 (April 2015): 985–89. http://dx.doi.org/10.4028/www.scientific.net/amm.754-755.985.
Der volle Inhalt der QuelleAlmonti, Daniele, Gabriele Baiocco, Vincenzo Tagliaferri und Nadia Ucciardello. „Design and Mechanical Characterization of Voronoi Structures Manufactured by Indirect Additive Manufacturing“. Materials 13, Nr. 5 (29.02.2020): 1085. http://dx.doi.org/10.3390/ma13051085.
Der volle Inhalt der QuelleDissertationen zum Thema "Fabrication additive indirecte"
Grimaud, Pierre. „Élaboration de prothèses dentaires par fabrication additive indirecte combinant stéréolithographie et gel casting“. Electronic Thesis or Diss., Valenciennes, Université Polytechnique Hauts-de-France, 2024. http://www.theses.fr/2024UPHF0004.
Der volle Inhalt der QuelleThis thesis results from collaborative research initiated in October 2020, the theme of which revolves around the development of technical ceramic pieces with complex geometry using innovative processes. Combining the skills of CERAMATHS of Maubeuge-France and the BCRC of Mons-Belgium, this applied thesis was co-financed by the agglomeration of Maubeuge-Val-de-Sambre (CAMVS) and the BCRC and is part of an approach of Eco-design aimed in particular at the manufacture of dental crowns in ZrO2. The established strategy consists of combining additive techniques with gel-casting processes, by molding biosourced polymer gels that can be mineralized after conventional heat treatment. This involves addressing recurring problems specific to machining operations on parts with complex geometry (production of waste, appearance of microcracks, etc.). Numerous tests and experimental measurements are presented, as well as molecular modeling calculations, in order to understand the chemical mechanisms involved during the transformation stages and correlate physicochemical measurements and forecast calculations. The thesis is therefore divided into four main chapters: Chapter II presents dental prostheses in general and a description of the various manufacturing techniques taken from the literature. Focusing mainly on the making of ceramic pieces, this bibliographical chapter allows us to compare and classify the processes between them, specifying the techniques of direct and indirect additive, subtractive and formative shaping. A focus on the gel casting process allows us to address the potential advantages of a route using a gel loaded with ceramic powders. By justifying the experimental approach adopted, this bibliography will make it possible to confront the current difficulties of implementing complex ceramic parts with the requirements of the dental field. We will see in the chapter III that Agarose can be used as a sacrificial polymer matrix capable of dispersing ceramic powders before heat treatment and densification. This chapter is thus devoted to the characterization of raw materials, then to the manufacture of ceramic parts combining an additive method (mold design) and a Gel Casting method using Agarose. On the one hand, agarose in solution is presented from a preparatory, behavioral and physicochemical point of view. Furthermore, the manufacturing of molds by stereolithography is also described. Chapter IV specifies the strategies and work undertaken to modify the general properties of agarose. Various agarose succinates have been synthesized and experimentally characterized in this direction. Results are presented to qualify the rheological behavior, with interpretations supported by macromolecular modeling calculations. Chapter V concerns the implementation work of chemically activated gelation in order to exploit the properties of sodium alginate rather than those of agarose. In this chapter, two different pathways are studied based on stoichiometric variations of the initial reaction medium, as well as promising shaping results. The general conclusion specifies a qualitative assessment and perspectives on our process which combines molds obtained by stereolithography and a viscous matrix based on natural polymers such as agarose and sodium alginate
Krimi, Imane. „Contribution au potentiel de la fabrication additive dans la construction : Proposition d’une formulation cimentaire imprimable“. Thesis, Ecole centrale de Lille, 2017. http://www.theses.fr/2017ECLI0021.
Der volle Inhalt der QuelleAdditive Manufacturing (3D printing) consists in building an object layer by layer following a 3D model. For this purpose an appropriate material, machine and model are needed. From Construction industry point of view, 3D printing is considered as a new building method. Since 2010, the use of 3D printing for construction has known a large evolution. More and more real construction projects are using this new technology. Some of these examples are Winsun in China, D-Shape in Italy, Contour Crafting in California or Apis Cor in Russia…etc.The work presented in this manuscript was conducted through an industrial PhD thesis (CIFRE) which was launched between “Ecole Centrale de Lille” and “Bouygues Construction” in 2015. The objective of this work was to study the potential of large scale 3D printing integration in the construction process and more precisely the development of a printable cement based mix design.The work is organized in three main parts.The first part was dedicated to 3D printing and cement based material as general concepts. Then their interactions were analyzed. The second part was devoted to the printable mix design. The printability was defined using three indicators: Extrudability, Buildability and layers adhesion. The third part was dedicated to check the printability of the proposed mix design. This work may be considered as a first approach to define a laboratory scale methodology for cement based materials printability testing. It is also a step to contribute to the development of construction 3D printers
Bernardo, Jesse Raymond. „Indirect Tissue Scaffold Fabrication via Additive Manufacturing and Biomimetic Mineralization“. Thesis, Virginia Tech, 2010. http://hdl.handle.net/10919/36312.
Der volle Inhalt der QuelleMaster of Science
Konferenzberichte zum Thema "Fabrication additive indirecte"
Tsybeskov, L., K. L. Moore, S. P. Duttagupta, K. D. Hirschman, D. G. Hall und P. M. Fauchet. „Fabrication and Luminescence of Large Si Nanocrystals“. In Chemistry and Physics of Small-Scale Structures. Washington, D.C.: Optica Publishing Group, 1997. http://dx.doi.org/10.1364/cps.1997.ctub.6.
Der volle Inhalt der QuelleTsybeskov, L., K. D. Hirschman, S. P. Duttagupta, D. G. Hall und P. M. Fauchet. „Fabrication and Characterization of Si Dots Prepared by Self-Organized Recrystallization“. In Quantum Optoelectronics. Washington, D.C.: Optica Publishing Group, 1997. http://dx.doi.org/10.1364/qo.1997.qfc.4.
Der volle Inhalt der QuelleOyekola, Peter O., Al-Barkat Mehedi, Morgan Ivey und Mohammad I. Albakri. „Indirect Impedance-Based NDE Through Instrumented Fixtures; Effects of Fixture Material on Defect-Detection Capabilities“. In ASME 2021 Conference on Smart Materials, Adaptive Structures and Intelligent Systems. American Society of Mechanical Engineers, 2021. http://dx.doi.org/10.1115/smasis2021-67797.
Der volle Inhalt der QuelleAbouhashem, Azza, Ali Al-Maadeed, Abdulaziz Almohannadi, Hemalatha Rajajothi und Jolly Bhadra. „Super-hydrophobic Membrane based on PVDF/ZnO Composite Electrospun Nanofibers for wastewater & Oil spill treatment“. In Qatar University Annual Research Forum & Exhibition. Qatar University Press, 2020. http://dx.doi.org/10.29117/quarfe.2020.0049.
Der volle Inhalt der QuelleEl-Tantawi, Wael AbdelSattar. „Comparison Between Different Types of Suction Pile“. In Offshore Technology Conference. OTC, 2023. http://dx.doi.org/10.4043/32220-ms.
Der volle Inhalt der Quelle