Zeitschriftenartikel zum Thema „Fabrication additive (FDM)“
Geben Sie eine Quelle nach APA, MLA, Chicago, Harvard und anderen Zitierweisen an
Machen Sie sich mit Top-50 Zeitschriftenartikel für die Forschung zum Thema "Fabrication additive (FDM)" bekannt.
Neben jedem Werk im Literaturverzeichnis ist die Option "Zur Bibliographie hinzufügen" verfügbar. Nutzen Sie sie, wird Ihre bibliographische Angabe des gewählten Werkes nach der nötigen Zitierweise (APA, MLA, Harvard, Chicago, Vancouver usw.) automatisch gestaltet.
Sie können auch den vollen Text der wissenschaftlichen Publikation im PDF-Format herunterladen und eine Online-Annotation der Arbeit lesen, wenn die relevanten Parameter in den Metadaten verfügbar sind.
Sehen Sie die Zeitschriftenartikel für verschiedene Spezialgebieten durch und erstellen Sie Ihre Bibliographie auf korrekte Weise.
Stöckli, Fritz, Fabio Modica und Kristina Shea. „Designing passive dynamic walking robots for additive manufacture“. Rapid Prototyping Journal 22, Nr. 5 (15.08.2016): 842–47. http://dx.doi.org/10.1108/rpj-11-2015-0170.
Der volle Inhalt der QuelleGutierrez, Cassie, Rudy Salas, Gustavo Hernandez, Dan Muse, Richard Olivas, Eric MacDonald, Michael D. Irwin et al. „CubeSat Fabrication through Additive Manufacturing and Micro-Dispensing“. International Symposium on Microelectronics 2011, Nr. 1 (01.01.2011): 001021–27. http://dx.doi.org/10.4071/isom-2011-tha4-paper3.
Der volle Inhalt der QuelleGeorgopoulou, Antonia, Lukas Egloff, Bram Vanderborght und Frank Clemens. „A Sensorized Soft Pneumatic Actuator Fabricated with Extrusion-Based Additive Manufacturing“. Actuators 10, Nr. 5 (10.05.2021): 102. http://dx.doi.org/10.3390/act10050102.
Der volle Inhalt der QuelleCuan-Urquizo, Enrique, Mario Martínez-Magallanes, Saúl E. Crespo-Sánchez, Alfonso Gómez-Espinosa, Oscar Olvera-Silva und Armando Roman-Flores. „Additive manufacturing and mechanical properties of lattice-curved structures“. Rapid Prototyping Journal 25, Nr. 5 (10.06.2019): 895–903. http://dx.doi.org/10.1108/rpj-11-2018-0286.
Der volle Inhalt der QuelleWang, Shushu, Rakshith Badarinath, El-Amine Lehtihet und Vittaldas Prabhu. „Evaluation of Additive Manufacturing Processes in Fabrication of Personalized Robot“. International Journal of Automation Technology 11, Nr. 1 (05.01.2017): 29–37. http://dx.doi.org/10.20965/ijat.2017.p0029.
Der volle Inhalt der QuelleT., Sathies, Senthil P. und Anoop M.S. „A review on advancements in applications of fused deposition modelling process“. Rapid Prototyping Journal 26, Nr. 4 (30.01.2020): 669–87. http://dx.doi.org/10.1108/rpj-08-2018-0199.
Der volle Inhalt der QuelleHu, Xueling, Alix Marcelle Sansi Seukep, Velmurugan Senthooran, Lixin Wu, Lei Wang, Chen Zhang und Jianlei Wang. „Progress of Polymer-Based Dielectric Composites Prepared Using Fused Deposition Modeling 3D Printing“. Nanomaterials 13, Nr. 19 (06.10.2023): 2711. http://dx.doi.org/10.3390/nano13192711.
Der volle Inhalt der QuelleRaju, Suresh. „Evaluating Impact of Different Parameters in Additive Manufacturing for Complex Situations“. INTERANTIONAL JOURNAL OF SCIENTIFIC RESEARCH IN ENGINEERING AND MANAGEMENT 08, Nr. 05 (02.06.2024): 1–5. http://dx.doi.org/10.55041/ijsrem35274.
Der volle Inhalt der QuelleLaban, Othman, Elsadig Mahdi, Samahat Samim und John-John Cabibihan. „A Comparative Study between Polymer and Metal Additive Manufacturing Approaches in Investigating Stiffened Hexagonal Cells“. Materials 14, Nr. 4 (12.02.2021): 883. http://dx.doi.org/10.3390/ma14040883.
Der volle Inhalt der QuellePaterson, Abby Megan, Richard Bibb, R. Ian Campbell und Guy Bingham. „Comparing additive manufacturing technologies for customised wrist splints“. Rapid Prototyping Journal 21, Nr. 3 (20.04.2015): 230–43. http://dx.doi.org/10.1108/rpj-10-2013-0099.
Der volle Inhalt der QuellePrakash, Kode Jaya, und Shivraj Narayan Yeole. „Design and Additive Manufacturing of a Prototype Using Fused Deposition Modeling Technique“. Journal of Mechatronics Machine Design and Manufacturing 6, Nr. 2 (2024): 1–6. http://dx.doi.org/10.46610/jmmdm.2024.v06i02.001.
Der volle Inhalt der QuelleKarimi, Armin, Davood Rahmatabadi und Mostafa Baghani. „Various FDM Mechanisms Used in the Fabrication of Continuous-Fiber Reinforced Composites: A Review“. Polymers 16, Nr. 6 (18.03.2024): 831. http://dx.doi.org/10.3390/polym16060831.
Der volle Inhalt der QuelleBesnea, Daniel, Georgeta Ionascu, Mihai Avram, Lucian Bogatu und Alina Spanu. „3D CAD, CAM and Rapid Prototyping Applied for Cam Fabrication“. Applied Mechanics and Materials 658 (Oktober 2014): 553–56. http://dx.doi.org/10.4028/www.scientific.net/amm.658.553.
Der volle Inhalt der QuellePatterson, Albert E., Charul Chadha und Iwona M. Jasiuk. „Identification and Mapping of Manufacturability Constraints for Extrusion-Based Additive Manufacturing“. Journal of Manufacturing and Materials Processing 5, Nr. 2 (10.04.2021): 33. http://dx.doi.org/10.3390/jmmp5020033.
Der volle Inhalt der QuelleQuiñonez, Paulina A., Leticia Ugarte-Sanchez, Diego Bermudez, Paulina Chinolla, Rhyan Dueck, Truman J. Cavender-Word und David A. Roberson. „Design of Shape Memory Thermoplastic Material Systems for FDM-Type Additive Manufacturing“. Materials 14, Nr. 15 (30.07.2021): 4254. http://dx.doi.org/10.3390/ma14154254.
Der volle Inhalt der QuelleUlkir, Osman, Mehmet Said Bayraklılar und Melih Kuncan. „Raster Angle Prediction of Additive Manufacturing Process Using Machine Learning Algorithm“. Applied Sciences 14, Nr. 5 (29.02.2024): 2046. http://dx.doi.org/10.3390/app14052046.
Der volle Inhalt der QuelleJamal, Muhammad Azfar, Owaisur Rahman Shah, Usman Ghafoor, Yumna Qureshi und M. Raheel Bhutta. „Additive Manufacturing of Continuous Fiber-Reinforced Polymer Composites via Fused Deposition Modelling: A Comprehensive Review“. Polymers 16, Nr. 12 (07.06.2024): 1622. http://dx.doi.org/10.3390/polym16121622.
Der volle Inhalt der QuelleAbas, Muhammad, Mohammed Al Awadh, Tufail Habib und Sahar Noor. „Analyzing Surface Roughness Variations in Material Extrusion Additive Manufacturing of Nylon Carbon Fiber Composites“. Polymers 15, Nr. 17 (01.09.2023): 3633. http://dx.doi.org/10.3390/polym15173633.
Der volle Inhalt der QuelleOlivas, Richard, Rudy Salas, Dan Muse, Eric MacDonald, Ryan Wicker, Mike Newton und Ken Church. „Structural Electronics through Additive Manufacturing and Micro-Dispensing“. International Symposium on Microelectronics 2010, Nr. 1 (01.01.2010): 000940–46. http://dx.doi.org/10.4071/isom-2010-tha5-paper6.
Der volle Inhalt der QuelleThorsnes, Quinn S., Paul R. Turner, Mohammed Azam Ali und Jaydee D. Cabral. „Integrating Fused Deposition Modeling and Melt Electrowriting for Engineering Branched Vasculature“. Biomedicines 11, Nr. 12 (24.11.2023): 3139. http://dx.doi.org/10.3390/biomedicines11123139.
Der volle Inhalt der QuelleNaidu, A. Lakshumu, K. Himanth Kumar, G. Ramesh Kumar, L. Vedavathi, J. Naveen Kumar, G. Shanmukha Rao und N. Pavan Kalyan. „A Review on Fabrication and Printing of Carbon Fiber-Reinforced Composite Filaments using FDM Process“. International Journal of Membrane Science and Technology 10, Nr. 2 (30.07.2023): 2873–81. http://dx.doi.org/10.15379/ijmst.v10i2.2979.
Der volle Inhalt der QuelleGalatas, Athanasios, Hany Hassanin, Yahya Zweiri und Lakmal Seneviratne. „Additive Manufactured Sandwich Composite/ABS Parts for Unmanned Aerial Vehicle Applications“. Polymers 10, Nr. 11 (13.11.2018): 1262. http://dx.doi.org/10.3390/polym10111262.
Der volle Inhalt der QuelleKazberov, Roman Ya. „Application of Polymer Materials and Additive Technologies in Electrical Equipment of the Agro-Industrial Complex“. Elektrotekhnologii i elektrooborudovanie v APK 48, Nr. 4 (Dezember 2021): 51–55. http://dx.doi.org/10.22314/2658-4859-2021-68-4-51-55.
Der volle Inhalt der QuelleBarreto, Gabriela, Santiago Restrepo, Carlos Mauricio Vieira, Sergio Neves Monteiro und Henry A. Colorado. „Rice Husk with PLA: 3D Filament Making and Additive Manufacturing of Samples for Potential Structural Applications“. Polymers 16, Nr. 2 (15.01.2024): 245. http://dx.doi.org/10.3390/polym16020245.
Der volle Inhalt der QuelleMogan, J., W. S. W. Harun, K. Kadirgama, D. Ramasamy, F. M. Foudzi, A. B. Sulong, F. Tarlochan und F. Ahmad. „Fused Deposition Modelling of Polymer Composite: A Progress“. Polymers 15, Nr. 1 (21.12.2022): 28. http://dx.doi.org/10.3390/polym15010028.
Der volle Inhalt der QuelleKhan, Shaheryar Atta, Bilal Ahmed Siddiqui, Muhammad Fahad und Maqsood Ahmed Khan. „Evaluation of the Effect of Infill Pattern on Mechanical Stregnth of Additively Manufactured Specimen“. Materials Science Forum 887 (März 2017): 128–32. http://dx.doi.org/10.4028/www.scientific.net/msf.887.128.
Der volle Inhalt der QuelleWang, Hao, Hamzeh A. Al Shraida und Jin Yu. „Predictive Modeling of Out-of-Plane Deviation for the Quality Improvement of Additive Manufacturing“. Materials Science Forum 1086 (27.04.2023): 79–83. http://dx.doi.org/10.4028/p-12034b.
Der volle Inhalt der QuelleWang, Yanen, Ray Tahir Mushtaq, Ammar Ahmed, Ammar Ahmed, Mudassar Rehman, Mudassar Rehman, Aqib Mashood Khan et al. „Additive manufacturing is sustainable technology: citespace based bibliometric investigations of fused deposition modeling approach“. Rapid Prototyping Journal 28, Nr. 4 (25.10.2021): 654–75. http://dx.doi.org/10.1108/rpj-05-2021-0112.
Der volle Inhalt der QuelleSingh, Sunpreet, und Rupinder Singh. „Mechanical characterization and comparison of additive manufactured ABS, Polyflex™ and ABS/Polyflex™ blended functional prototypes“. Rapid Prototyping Journal 26, Nr. 2 (13.01.2020): 225–37. http://dx.doi.org/10.1108/rpj-11-2017-0234.
Der volle Inhalt der QuellePatterson, Albert E., Charul Chadha und Iwona M. Jasiuk. „Manufacturing process-driven structured materials (MPDSMs): design and fabrication for extrusion-based additive manufacturing“. Rapid Prototyping Journal 28, Nr. 4 (25.10.2021): 716–31. http://dx.doi.org/10.1108/rpj-04-2021-0072.
Der volle Inhalt der QuelleTateno, Toshitake, Yuta Yaguchi und Osamu Hasegawa. „Geometric Accuracy Evaluation of Fabricated Parts by Additive Manufacturing toward Parallel Fabrication“. Applied Mechanics and Materials 761 (Mai 2015): 98–103. http://dx.doi.org/10.4028/www.scientific.net/amm.761.98.
Der volle Inhalt der QuelleTsao, Che-Chih, Ho-Hsin Chang, Meng-Hao Liu, Ho-Chia Chen, Yun-Tang Hsu, Pei-Ying Lin, Yih-Lin Chou et al. „Freeform additive manufacturing by vari-directional vari-dimensional material deposition“. Rapid Prototyping Journal 24, Nr. 2 (12.03.2018): 379–94. http://dx.doi.org/10.1108/rpj-01-2017-0014.
Der volle Inhalt der QuelleAsadollahi-Yazdi, Elnaz, Julien Gardan und Pascal Lafon. „Multi-objective optimization approach in design for additive manufacturing for fused deposition modeling“. Rapid Prototyping Journal 25, Nr. 5 (10.06.2019): 875–87. http://dx.doi.org/10.1108/rpj-07-2018-0186.
Der volle Inhalt der QuelleR., Prithvirajan, Sugavaneswaran M., Sathishkumar N. und Arumaikkannu G. „Metal bellow hydroforming using additive manufactured die: a case study“. Rapid Prototyping Journal 25, Nr. 4 (13.05.2019): 765–74. http://dx.doi.org/10.1108/rpj-07-2018-0182.
Der volle Inhalt der QuelleRafael Santana Queiroz, Lucas Marins Batista, Miguel Felipe Nery Vieira, Lucas Cruz da Silva, Bruno Caetano dos Santos Silva und Rodrigo Santiago Coelho. „A Literature Review of Additive Manufacturing in the Fabrication of Soft Robots: Main Techniques, Applications, and Related Industrial-Sized Machines“. JOURNAL OF BIOENGINEERING, TECHNOLOGIES AND HEALTH 6, Nr. 1 (08.04.2023): 91–97. http://dx.doi.org/10.34178/jbth.v6i1.286.
Der volle Inhalt der QuelleDrossel, Welf-Guntram, Jörn Ihlemann, Ralf Landgraf, Erik Oelsch und Marek Schmidt. „Basic Research for Additive Manufacturing of Rubber“. Polymers 12, Nr. 10 (01.10.2020): 2266. http://dx.doi.org/10.3390/polym12102266.
Der volle Inhalt der QuelleVyavahare, Swapnil, Shailendra Kumar und Deepak Panghal. „Experimental study of surface roughness, dimensional accuracy and time of fabrication of parts produced by fused deposition modelling“. Rapid Prototyping Journal 26, Nr. 9 (13.07.2020): 1535–54. http://dx.doi.org/10.1108/rpj-12-2019-0315.
Der volle Inhalt der QuelleDontsov, Yury V., Sergey V. Panin, Dmitry G. Buslovich und Filippo Berto. „Taguchi Optimization of Parameters for Feedstock Fabrication and FDM Manufacturing of Wear-Resistant UHMWPE-Based Composites“. Materials 13, Nr. 12 (15.06.2020): 2718. http://dx.doi.org/10.3390/ma13122718.
Der volle Inhalt der QuelleLanzotti, Antonio, Massimo Martorelli, Teresa Russo und Antonio Gloria. „Design of Additively Manufactured Lattice Structures for Tissue Regeneration“. Materials Science Forum 941 (Dezember 2018): 2154–59. http://dx.doi.org/10.4028/www.scientific.net/msf.941.2154.
Der volle Inhalt der QuelleBagatella, Simone, Annacarla Cereti, Francesco Manarini, Marco Cavallaro, Raffaella Suriano und Marinella Levi. „Thermally Conductive and Electrically Insulating Polymer-Based Composites Heat Sinks Fabricated by Fusion Deposition Modeling“. Polymers 16, Nr. 3 (04.02.2024): 432. http://dx.doi.org/10.3390/polym16030432.
Der volle Inhalt der QuelleAli, Hind B., Jawad K. Oleiwi und Farhad M. Othman. „Compressive and Tensile Properties of ABS Material as a Function of 3D Printing Process Parameters“. Revue des composites et des matériaux avancés 32, Nr. 3 (30.06.2022): 117–23. http://dx.doi.org/10.18280/rcma.320302.
Der volle Inhalt der QuelleFountas, Nikolaos A., Ioannis Papantoniou, John D. Kechagias, Dimitrios E. Manolakos und Nikolaos M. Vaxevanidis. „Experimental and statistical investigation on flexural properties of FDM fabricated PLA specimens applying response surface methodology“. Journal of Physics: Conference Series 2692, Nr. 1 (01.02.2024): 012047. http://dx.doi.org/10.1088/1742-6596/2692/1/012047.
Der volle Inhalt der QuelleBamiduro, Oluwakayode, Gbadebo Owolabi, Mulugeta A. Haile und Jaret C. Riddick. „The influence of load direction, microstructure, raster orientation on the quasi-static response of fused deposition modeling ABS“. Rapid Prototyping Journal 25, Nr. 3 (08.04.2019): 462–72. http://dx.doi.org/10.1108/rpj-04-2018-0087.
Der volle Inhalt der QuellePranzo, Daniela, Piero Larizza, Daniel Filippini und Gianluca Percoco. „Extrusion-Based 3D Printing of Microfluidic Devices for Chemical and Biomedical Applications: A Topical Review“. Micromachines 9, Nr. 8 (27.07.2018): 374. http://dx.doi.org/10.3390/mi9080374.
Der volle Inhalt der QuelleSyrlybayev, Daniyar, Beibit Zharylkassyn, Aidana Seisekulova, Mustakhim Akhmetov, Asma Perveen und Didier Talamona. „Optimisation of Strength Properties of FDM Printed Parts—A Critical Review“. Polymers 13, Nr. 10 (14.05.2021): 1587. http://dx.doi.org/10.3390/polym13101587.
Der volle Inhalt der QuelleM. Johnson, Wayne, Matthew Rowell, Bill Deason und Malik Eubanks. „Comparative evaluation of an open-source FDM system“. Rapid Prototyping Journal 20, Nr. 3 (14.04.2014): 205–14. http://dx.doi.org/10.1108/rpj-06-2012-0058.
Der volle Inhalt der QuellePodsiadły, Bartłomiej, Piotr Matuszewski, Andrzej Skalski und Marcin Słoma. „Carbon Nanotube-Based Composite Filaments for 3D Printing of Structural and Conductive Elements“. Applied Sciences 11, Nr. 3 (30.01.2021): 1272. http://dx.doi.org/10.3390/app11031272.
Der volle Inhalt der QuelleSingh, Rupinder, Ranvijay Kumar, Ilenia Farina, Francesco Colangelo, Luciano Feo und Fernando Fraternali. „Multi-Material Additive Manufacturing of Sustainable Innovative Materials and Structures“. Polymers 11, Nr. 1 (04.01.2019): 62. http://dx.doi.org/10.3390/polym11010062.
Der volle Inhalt der QuelleGarcía-Martínez, Héctor, Ernesto Ávila-Navarro, Germán Torregrosa-Penalva, Alberto Rodríguez-Martínez, Carolina Blanco-Angulo und Miguel A. de la de la Casa-Lillo. „Low-Cost Additive Manufacturing Techniques Applied to the Design of Planar Microwave Circuits by Fused Deposition Modeling“. Polymers 12, Nr. 9 (28.08.2020): 1946. http://dx.doi.org/10.3390/polym12091946.
Der volle Inhalt der QuelleUlkir, Osman. „Energy-Consumption-Based Life Cycle Assessment of Additive-Manufactured Product with Different Types of Materials“. Polymers 15, Nr. 6 (15.03.2023): 1466. http://dx.doi.org/10.3390/polym15061466.
Der volle Inhalt der Quelle