Einloggen

Thematische Bibliographien / Decoupling application / Zeitschriftenartikel

Um die anderen Arten von Veröffentlichungen zu diesem Thema anzuzeigen, folgen Sie diesem Link: Decoupling application.

Zeitschriftenartikel zum Thema „Decoupling application“

Autor: Grafiati

Veröffentlicht am 1. Februar 2025

Geben Sie eine Quelle nach APA, MLA, Chicago, Harvard und anderen Zitierweisen an

Wählen Sie eine Art der Quelle aus:

Machen Sie sich mit Top-50 Zeitschriftenartikel für die Forschung zum Thema "Decoupling application" bekannt.

Neben jedem Werk im Literaturverzeichnis ist die Option "Zur Bibliographie hinzufügen" verfügbar. Nutzen Sie sie, wird Ihre bibliographische Angabe des gewählten Werkes nach der nötigen Zitierweise (APA, MLA, Harvard, Chicago, Vancouver usw.) automatisch gestaltet.

Sie können auch den vollen Text der wissenschaftlichen Publikation im PDF-Format herunterladen und eine Online-Annotation der Arbeit lesen, wenn die relevanten Parameter in den Metadaten verfügbar sind.

Sehen Sie die Zeitschriftenartikel für verschiedene Spezialgebieten durch und erstellen Sie Ihre Bibliographie auf korrekte Weise.

1

Liu, Kaixin, Yang Liu, Fazhi Song und Jiubin Tan. „Dynamic Decoupling Method Based on Motor Dynamic Compensation with Application for Precision Mechatronic Systems“. Energies 17, Nr. 9 (25.04.2024): 2038. http://dx.doi.org/10.3390/en17092038.

Der volle Inhalt der Quelle

Annotation:

Motors are widely employed in mechatronic systems, especially in precision multiple degrees of freedom motion systems. In most applications, the dynamic equation between the motor instruction and the actual driving force is simplified as a constant. Subsequently, the static decoupling method can be utilized to design the feedback controller. However, in high-precision mechatronic systems, motor dynamics cannot be neglected, and the static decoupling performance is compromised due to discrepancies between motors. In this paper, a dynamic decoupling method is developed to improve the decoupling performance of the multiple-input multiple-output systems. The effects of transmission delays, motor dynamics, and discrepancies between different motors are taken into consideration in the dynamic decoupling method. Furthermore, a data-driven optimization method is developed to estimate the parameters of the dynamic decoupling controller. The effectiveness and superiority of the proposed method are demonstrated through numerical simulations. The experimental results show that the dynamic decoupling control method can achieve a 97.75% performance improvement at least compared to the static decoupling control method.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

2

Wang, Shangjiu, Shaohua Zhang und Liang Cheng. „Drivers and Decoupling Effects of PM2.5 Emissions in China: An Application of the Generalized Divisia Index“. International Journal of Environmental Research and Public Health 20, Nr. 2 (04.01.2023): 921. http://dx.doi.org/10.3390/ijerph20020921.

Der volle Inhalt der Quelle

Annotation:

Although economic growth brings abundant material wealth, it is also associated with serious PM2.5 pollution. Decoupling PM2.5 emissions from economic development is important for China’s long-term sustainable development. In this paper, the generalized Divisia index method (GDIM) is extended by introducing innovation indicators to investigate the main drivers of PM2.5 pollution in China and its four subregions from 2008 to 2017. Afterwards, a GDIM-based decoupling index is developed to examine the decoupling states between PM2.5 emissions and economic growth and to identify the main factors leading to decoupling. The obtained results show that: (1) Innovation input scale and GDP are the main drivers for increases in PM2.5 emissions, while innovation input PM2.5 intensity, emission intensity, and emission coefficient are the main reasons for reductions in PM2.5 pollution. (2) China and its four subregions show general upward trends in the decoupling index, and their decoupling states turn from weak decoupling to strong decoupling. (3) Innovation input PM2.5 intensity, emission intensity, and emission coefficient contribute largely to the decoupling of PM2.5 emissions. Overall, this paper provides valuable information for mitigating haze pollution.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

3

Brilakis, Demetrios S., Demetrios E. Tsesmelis und Efthimios Zervas. „Development and application of energy decoupling index as Cartesian Vector: evidence from world-wide regional data“. IOP Conference Series: Earth and Environmental Science 899, Nr. 1 (01.11.2021): 012027. http://dx.doi.org/10.1088/1755-1315/899/1/012027.

Der volle Inhalt der Quelle

Annotation:

Abstract Economic growth and energy consumed is critical for sustainable global development. In this paper, an extended Vector version of the commonly used Decoupling Index De of energy elasticity to Gross Domestic Product (GDP) and Decoupling Ratio of Energy Intensity of GDP are used to investigate decoupling phenomenon for the period 1990 to 2014 in the main regions of the World. Using Vector properties, this study overcomes some well-known deficiencies of Energy to Growth elasticity Decoupling Index and suggests the Decoupling Angle as a suitable indicator when describing decoupling. The relationships with aggregate and per capita indicators are also examined. A general finding was that in emerging economies, even when moving to “disconnected” states of decoupling, reduced energy rates were paired with reduced growth rates and accelerated growth rates with increased energy consumption rates. This statement raises questions over long-term decoupling of energy consumption from economic growth.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

4

Zhang, Yankai. „The Scope of Application of Power Decoupling Technology and Its Evolution“. Highlights in Science, Engineering and Technology 81 (26.01.2024): 182–87. http://dx.doi.org/10.54097/1z1a6p54.

Der volle Inhalt der Quelle

Annotation:

As energy consumption worldwide continues to escalate, the gap between energy supply and demand is becoming alarmingly evident. This disparity, combined with the mounting environmental threats impacting production and human existence, intensifies the energy challenges our nation confronts. At the heart of addressing these issues is the imperative to maximize energy efficiency. Within the realm of power electronics, the topic of power decoupling has emerged as a pivotal area of research. This paper delves into the application of power decoupling in power electronics, offering a comprehensive analysis of its characteristics and applicability. Tracing its evolutionary trajectory, the paper systematically explores the historical progression of power decoupling technology. It further segments the technology, elucidating its merits, limitations, and mechanisms for enhancement. By aggregating data, the study categorizes various inverters and contrasts their roles in the domain of power decoupling. Subsequently, the discourse distinguishes between active and reactive power decoupling, providing prevalent examples of the former. The paper concludes by affirming the trajectory of power decoupling towards increased cleanliness and efficiency. The emphasis on high-precision and high-efficiency apparatuses heralds the anticipated future direction of this field.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

5

Qin, Lei, Li Kun Wang, Yu Lu und Jing Jing Zhou. „Cross Coupling Effect in Multi-Element Composites for Transducer Array Application“. Applied Mechanics and Materials 275-277 (Januar 2013): 1650–53. http://dx.doi.org/10.4028/www.scientific.net/amm.275-277.1650.

Der volle Inhalt der Quelle

Annotation:

A novel three-phase (ceramic, epoxy resin and decoupling material) piezoelectric composite with multi-element in parallel connection has been developed by using dice-fill technology. This kind of composite consists of a large number of elements which can be seen as a single-sound radiation source. The space between elements is determined via a precise method of calculation. The ceramic elements are then cut using precision machinery to achieve exact results. A kind of decoupling material has been developed to decrease the cross coupling effect between elements. The vibration velocity curves of active elements and close elements were measured using a Scanning Laser Vibrometer (Polytec PSV-400). The results indicated that the decoupling materials induced in multi-element composites have a good decoupling effect. Vibration attenuations between adjacent elements are larger than 31 dB at resonance frequency.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

6

Klika, Karel D. „The Application of Simple and Easy to Implement Decoupling Pulse Scheme Combinations to Effect Decoupling of Large J Values with Reduced Artifacts“. International Journal of Spectroscopy 2014 (29.04.2014): 1–9. http://dx.doi.org/10.1155/2014/289638.

Der volle Inhalt der Quelle

Annotation:

Of the various problems in decoupling one nucleus type from another using standard decoupling pulse schemes for broadband decoupling, a particular challenge is to effect full, artifact-free decoupling when the size of the coupling constant is very large. Herein it is demonstrated that 1H decoupling of the 31P NMR spectrum of diethyl phosphonate {HP(=O)(OCH2CH3)2} can be accomplished with reduced artifacts despite the large JH,P1 value of 693 Hz by using a combination of decoupling pulse schemes involving continuous-wave (CW) irradiation and either adiabatic-pulse decoupling (APD), MPF decoupling, or traditional composite-pulse decoupling (CPD) schemes such as WALTZ or GARP. The considered strategy is simple, efficient, and easy to implement on most instruments. The best result was attained for a combination of CW and CPD using GARP with a standard pulse width of 60 μs. Altogether, the advantages of the methodology include low power requirements, complete decoupling, tolerance of a range of large J values, large bandwidth for normal-sized J values, and the suppression of sidebands.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

7

Shang, Ji Liang, und Da Hai Ren. „Boiler Combustion System of Multivariable Internal Model Control Application Research“. Advanced Materials Research 648 (Januar 2013): 305–10. http://dx.doi.org/10.4028/www.scientific.net/amr.648.305.

Der volle Inhalt der Quelle

Annotation:

In the industrial process of common multivariable time delay input/output system, a multivariable decoupling internal model controller design method is put forward based on the internal model control structure, the method for the design of internal model controller has the function of decoupling and controller. The advantage has the ability to achieve approximate or complete decoupling in nominal system output response, the method is used on the multivariable strong coupling of the boiler combustion control system to design and simulation study, the simulation results prove the effectiveness of the method. And in the process model and process mismatch showed strong robustness and anti jamming ability.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

8

Liu, Wangyu, Zheng Liu, Zhengqiang Guo, Zhaoqi Chen und Weigui Xie. „Application of Poisson’s ratio structures and decoupling algorithm for 3D force sensing“. Measurement Science and Technology 35, Nr. 6 (12.03.2024): 065105. http://dx.doi.org/10.1088/1361-6501/ad3018.

Der volle Inhalt der Quelle

Annotation:

Abstract Flexible tactile electronic devices are extensively used in the fields of robotics, medical detection, and human-computer interaction. Monitoring contact parameters, including force magnitude, direction, and contact location, is particularly vital for skin-like tactile sensing devices. Herein, a 3D force sensor is designed based on porous structure with deliberately designed Poisson’s ratios. A genetic algorithm (GA) optimized back propagation neuronal network (BPNN) model is proposed to support the 3D force decoupling, which can greatly improve the decoupling accuracy. The introduction of the GA-BPNN significantly enhances decoupling accuracy compared to the initial neural network. Micro-porous structures with varied Poisson’s ratios are embedded into the sensing unit to achieve better sensibility. Significantly, this study underscores that the decoupling accuracy of the force components along the Z-axis can be further improved by substituting the solid unit with a designed porous structure unit featuring a specific Poisson’s ratio in an arrayed 3D force sensor.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

9

Cotsaftis, M., M. Rouff, C. Vibet und J. Robert. „Application of decoupling method to Hamiltonian systems“. IEE Proceedings - Control Theory and Applications 142, Nr. 6 (01.11.1995): 595–602. http://dx.doi.org/10.1049/ip-cta:19952219.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

10

Pulat, B. M., und P. S. Pulat. „A decoupling inventory model and an application“. IEEE Transactions on Engineering Management 39, Nr. 1 (1992): 73–76. http://dx.doi.org/10.1109/17.119664.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

11

Cicchetti, Antonio, und Davide Di Ruscio. „Decoupling web application concerns through weaving operations“. Science of Computer Programming 70, Nr. 1 (Januar 2008): 62–86. http://dx.doi.org/10.1016/j.scico.2007.10.002.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

12

Qin, Jian, und Chun Guang Wei. „Research on the Application of Intelligent Decoupling Control Method in the Process Control System“. Advanced Materials Research 846-847 (November 2013): 339–42. http://dx.doi.org/10.4028/www.scientific.net/amr.846-847.339.

Der volle Inhalt der Quelle

Annotation:

There is a universal coupling in process control system, especially with the development of science and technology, industry system has became more and more big, the control process is more complicated, the variables which need to solve are also gradually increased. Therefore between the variables in the associated process produce coupling. In order to solve the coupling problems, we introduced PI self-adjusting fuzzy control model in the link of decoupling, and designed the model and the algorithm of decoupling with decoupling controller. The experiment showed that, after the introduction of PI algorithm, the time when the system reaches a steady is greatly reduced, saving time and cost. Also there is no coupling between the two signals, which shows that PI algorithm successfully reaches the decoupling in the process control.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

13

Zhang, Zhe, Li Jun Hao und Bing Ma. „RBF Neural Network in the Application of Synthetic Tower Temperature Decoupling Control Research“. Applied Mechanics and Materials 380-384 (August 2013): 491–94. http://dx.doi.org/10.4028/www.scientific.net/amm.380-384.491.

Der volle Inhalt der Quelle

Annotation:

The chemical production is vital to the development of our country.It is greatly significant to improve the ammonia synthesis production control project and to increase the economic returns. In allusion to a controlled object with coupling characteristics,in this paper RBF neural network decoupling controller is designed to realize the decoupling control of the synthetic tower temperature. Through the comparison of the simulation test results, the scheme shows that it has a better control effect than the conventional PID decoupling control method, so, if the scheme could be used in the actual chemical production process, it shall have a certain value in use.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

14

Carrillo-Santos, Luis Mauricio, Mario Ponce-Silva, Leobardo Hernández-González, Gabriel Calzada-Lara, Yesenia Reyes-Severiano und Oswaldo Ulises Juarez-Sandoval. „Minimization of the Decoupling Circuit (DC-Link) in Induction Motors“. Applied Sciences 13, Nr. 6 (14.03.2023): 3674. http://dx.doi.org/10.3390/app13063674.

Der volle Inhalt der Quelle

Annotation:

There is currently a growing interest in replacing the internal combustion engine with electric motors in transportation applications. However, there are different problems related to electric motors for this application. One of them is the oversizing of the energy decoupling system since to ensure that the decoupling capacitor can store the power fluctuations, the capacitance required by the system is usually oversized. This leads to preference for the use of capacitors with construction technologies that have a lower lifetime than the remaining elements of the propulsion system, directly affecting the reliability of the system. In this article, the energy flow handled by the decoupling capacitor is analyzed considering the critical case of operation of an induction motor to minimize the capacitance required by the propulsion system; emphasizing the conditions that generate a higher energy return, from the motor mode of the electric machine to the decoupling capacitor. From the energy analysis, an equation for the capacitor calculation is obtained, involving proportionality factors that relate to the different operating powers, reducing up to 62.2% of the capacitance value required by the decoupling system, under conditions of maximum energy return in motor mode, compared to existing equations in the literature.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

15

Li, Zhaoguo, Jingrong Zheng, Dongyu Diao, Hualiang Zhou, Ting Zhang, Lu Ju, Zechen Liu und Xin Zhang. „Application and platform decoupling strategy of substation integrated monitoring system“. Journal of Physics: Conference Series 2903, Nr. 1 (01.11.2024): 012023. https://doi.org/10.1088/1742-6596/2903/1/012023.

Der volle Inhalt der Quelle

Annotation:

Abstract Aiming at the problems of poor data opening and sharing ability and closed application ecology of substation integrated monitoring system, the open monitoring system of a substation based on platform + APP architecture is proposed, which realizes the decoupling of APP and the monitoring system vendor platform through the security reinforced container technology, unified data interaction technology, and data service-oriented middleware technology. The decoupling of APP and platform promotes the construction of an open and shared industrial ecosystem for substation-integrated monitoring systems, which in turn improves the level of substation intelligence.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

16

Tian, Qing, und Jie Sun. „Decoupling Control of the Gas Collectors' Pressure System Based on Neural Network Inverse System“. Applied Mechanics and Materials 457-458 (Oktober 2013): 888–92. http://dx.doi.org/10.4028/www.scientific.net/amm.457-458.888.

Der volle Inhalt der Quelle

Annotation:

For collectors pressure system strong interference, coupled, nonlinear, multi-parameter and other characteristics, based on the inverse system decoupling principle, the reversibility of the mathematical model of the gas collectors pressure system is analyzed. BP neural network which has strong nonlinear approximation ability is applied, to approximate inverse system of gas collectors pressure system. Neural network inverse system with the original system composes of the pseudo linear decoupling composite system. The neural network inverse decoupling control of gas collectors pressure system is implemented. The simulation results show that this method realizes decoupling, has a certain application.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

17

Meng, Fan Wei, Qing Tian und Bin Xu. „Decoupling Control of the Gas Collectors’ Pressure System Based on Neural Network Inverse System“. Applied Mechanics and Materials 530-531 (Februar 2014): 985–89. http://dx.doi.org/10.4028/www.scientific.net/amm.530-531.985.

Der volle Inhalt der Quelle

Annotation:

For collectors’ pressure system strong interference, coupled, nonlinear, multi-parameter and other characteristics, based on the inverse system decoupling principle, the reversibility of the mathematical model of the gas collectors’ pressure system is analyzed. BP neural network which has strong nonlinear approximation ability is applied, to approximate inverse system of gas collectors’ pressure system. Neural network inverse system with the original system composes of the pseudo linear decoupling composite system. The neural network inverse decoupling control of gas collectors’ pressure system is implemented. The simulation results show that this method realizes decoupling, has a certain application.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

18

Christian, Kipscholl, und Konigorski Ulrich. „Design and Application of Decoupling Cyclic MIMO Control“. IFAC Proceedings Volumes 43, Nr. 11 (2010): 18–23. http://dx.doi.org/10.3182/20100826-3-tr-4016.00007.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

19

Koumboulis, F. N., und M. G. Skarpetis. „Robust triangular decoupling with application to 4WS cars“. IEEE Transactions on Automatic Control 45, Nr. 2 (2000): 344–52. http://dx.doi.org/10.1109/9.840005.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

20

Kotta, U. „Application of inverse system for linearization and decoupling“. Systems & Control Letters 8, Nr. 5 (Mai 1987): 453–57. http://dx.doi.org/10.1016/0167-6911(87)90086-7.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

21

Cao, Li Ting, Qi Bing Jin, Wei Su, Tong Shun Fan und Guan Hua Yu. „IMC-PID Design with Time Delay Compensation for Multivariable System Based on V-Norm Decoupling“. Applied Mechanics and Materials 128-129 (Oktober 2011): 150–53. http://dx.doi.org/10.4028/www.scientific.net/amm.128-129.150.

Der volle Inhalt der Quelle

Annotation:

An IMC-PID based on V-norm decoupling for multivariable stable process with time delay was proposed in this paper. Previous multivariable IMC is usually designed after the decoupling of the process, however the industrial process modeling is difficult to be precise, so the controller design is often not ideal after decoupling. The method in this paper designs both the decoupling and controller at the same time, the IMC is not only a controller, but also a decoupling compensation. A filter parameter optimization method based on a new performance function was adopted. The controller can be realized by time delay compensation when there is an advance part. The IMC-PID designed by this method has strong robustness when the model is mismatch and excellent performance both in decoupling and control. The simulation results show that the method is very effective and has a wide range of application in actual industry area.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

22

Xin, Lei, Hao Li, Jian Gao, Zhongwei Wang, KaiJie Zhou und Sirong Yu. „Large-scale fabrication of decoupling coatings with promising robustness and superhydrophobicity for antifouling, drag reduction, and organic photodegradation“. Friction 11, Nr. 5 (06.01.2023): 716–36. http://dx.doi.org/10.1007/s40544-022-0652-3.

Der volle Inhalt der Quelle

Annotation:

AbstractIt is still a challenge to achieve large-area preparation of robust superhydrophobic surfaces with strong mechanical stability. Here, a simple and low-cost method to prepare robust decoupling superhydrophobic coatings on aluminum (Al) alloys substrate has been presented. The superhydrophobicity and robustness of decoupling coatings are realized by structuring surfaces at two different length scales, with nanostructures for superhydrophobicity and microstructures for robustness. This prepared decoupling coating shows promising superhydrophobicity, with water contact angle (CA) of ∼158.4° and roll off angle (RA) of ∼3°. It also exhibits high repellency for impacting water droplets. Notably, the decoupling coating processes outstanding adhesion strength on the substrate after tape-peeling and cross-cut tests, also with promising wear resistantance after sandpaper abrasion and wear test. The friction coefficient of this decoupling coating is only ∼0.2. In addition, the robust decoupling superhydrophobic coating is applied to underwater buoyancy enhancement and fluid resistance reduction (drag reduction rate ∼30.09%). This decoupling superhydrophobic coating also displays promising self-cleaning and antifouling properties. Moreover, benefitting from the photocatalytic property of TiO2, this decoupling coating is also exploited for degrading organics to achieve seawater purification. This obtained decoupling superhydrophobic coating is expected to apply on other solids in marine fields, and the simple and eco-friendly method develops the potential practical application.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

23

Liu, Zhi-yong, Jing-li Du, Hong Bao und Qian Xu. „Adaptive Reduced Dimension Fuzzy Decoupling Control Method with Its Application to a Deployable Antenna Panel“. International Journal of Aerospace Engineering 2018 (16.09.2018): 1–10. http://dx.doi.org/10.1155/2018/4716863.

Der volle Inhalt der Quelle

Annotation:

This paper addresses the multiple-input multiple-output (MIMO) control problem with an active deformation adjustment mechanism on a 5-metre deployable antenna panel. An adaptive reduced-dimension fuzzy decoupling (ARDFD) control strategy based on fusion functions is proposed to eliminate the effects uncertainties due to coupled subsystems by designing and incorporating a fuzzy decoupling disturbance observer. Moreover, the MIMO system can be decomposed into a number of single-input single-output (SISO) systems using the unit diagonal matrix decoupling theory. Based on Lyapunov stability theory, it was shown that the error of fuzzy interference observer and the error between the fuzzy rule post parameter matrix and optimal post parameter matrix converge to a small region. Results of the simulation also show that the ARDFD control strategy can significantly eliminate adverse effects of the coupled subsystems.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

24

Zhang, Jian Bo, Dong Hai Fan und Ren Zhi Hu. „Application of Multivariable Non-Linear Decoupling Control Based on Neural Network“. Applied Mechanics and Materials 214 (November 2012): 786–91. http://dx.doi.org/10.4028/www.scientific.net/amm.214.786.

Der volle Inhalt der Quelle

Annotation:

Aimed at Neural Network can approach any nonlinear system with arbitrary accuracy, the frame of distributed NN decoupling system are proposed to decouple the MIMO nonlinear system. In this paper, we designed and finished the Distributed Control System based on ABB’s Freelance 800F, and collected experimental data to model the thermostatic heater, then we have carried out the mathematical model by means of MATLAB dynamic simulation. In sequence, we trained the neural network controller in MATLAB. When the decoupling is completed, we used controller to control the MIMO nonlinear system in DCS. Experiment result shows that it is conscientiously feasible and deserves to be widely applied in the process of controlling industry.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

25

Li, Xinyuan, Hui Xiao, Huaiqing Zhang, Zhewei Liu und Wenxiong Peng. „A 5.8 GHz π-Stub Decoupling Network for Receiving Antenna Arrays in Microwave Wireless Power Transmission“. Energies 15, Nr. 22 (19.11.2022): 8703. http://dx.doi.org/10.3390/en15228703.

Der volle Inhalt der Quelle

Annotation:

In this paper, a 5.8 GHz π-stub decoupling network is proposed to improve the performance of a receiving antenna array (RAA) in microwave wireless power transmission (MWPT) systems. A set of general design formulas was derived for determining the electric parameters of the required π-stubs. To validate the new technique, a π-stub decoupling network was combined with RAAs. The simulated and measured results show that the performance of the RAA is greatly improved by loading the π-stub decoupling network. In addition, a miniaturized MWPT system was built. System-level measurements indicate that the novel decoupling network enhances the receiving power of the RAA by up to 36.4%. An extended application also shows the scalability and effectiveness of the network, implying its huge potential in large-scale receiving arrays.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

26

Chen, Zai Ping, und Xing Jun Li. „The Application of GPC Decoupling Control in Tubular Furnace“. Key Engineering Materials 480-481 (Juni 2011): 1432–37. http://dx.doi.org/10.4028/www.scientific.net/kem.480-481.1432.

Der volle Inhalt der Quelle

Annotation:

Furnace as a control system whose conditions complex, parameter changing , great runing inertia ,control action delay . Of which there are many uncertainties ,such as air, fuel gas pressure and the frequent fluctuations of the fuel’s calorific value . The impact of mutual interference and coupling between the variables to the furnace can not be ignored , though it’s not dominant .The systerm based on control model use an advanced generalized predictive control (GPC) algorithm control mode .It can improve the control accuracy of regulator action when the furnace is at the condition of stability .The experiment results show that ducoupling GPC algorithm has a good convergence effect .

APA, Harvard, Vancouver, ISO und andere Zitierweisen

27

Huang, Bing, Lin Zhuang, Li Xiao und Juntao Lu. „Bond-energy decoupling: principle and application to heterogeneous catalysis“. Chem. Sci. 4, Nr. 2 (2013): 606–11. http://dx.doi.org/10.1039/c2sc21232c.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

28

Rezazad, Mostafa, und Y. C. Tay. „Decoupling NDN caches via CCndnS: Design, analysis, and application“. Computer Communications 151 (Februar 2020): 338–54. http://dx.doi.org/10.1016/j.comcom.2019.12.053.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

29

Inamura, Toyoshiro. „Theory and application of dynamic decoupling in structural analysis“. Finite Elements in Analysis and Design 1, Nr. 4 (Dezember 1985): 323–39. http://dx.doi.org/10.1016/0168-874x(85)90030-7.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

30

Qin, L., L. K. Wang und Y. Lu. „Decoupling in multi-elements composite for transducer array application“. Current Applied Physics 11, Nr. 3 (Mai 2011): S368—S370. http://dx.doi.org/10.1016/j.cap.2011.03.048.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

31

Shaka, A. J., C. J. Lee und A. Pines. „Iterative schemes for bilinear operators; application to spin decoupling“. Journal of Magnetic Resonance (1969) 77, Nr. 2 (April 1988): 274–93. http://dx.doi.org/10.1016/0022-2364(88)90178-3.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

32

Kila, Ramy, und Feruza Amirkulova. „Active attenuation of free field noise in a spatial domain using neural networks inferred controller“. Journal of the Acoustical Society of America 154, Nr. 4_supplement (01.10.2023): A183. http://dx.doi.org/10.1121/10.0023202.

Der volle Inhalt der Quelle

Annotation:

In this talk, we explore the application of deep neural networks (DNNs) to infer the decoupling of an incoming acoustic array, distinguishing between the signal of interest and noise components. The objective is to leverage this decoupling information to develop an effective controller that can attenuate the noise, thereby improving the quality of the desired signal. The decoupled noise is then fed into a specially designed controller to attenuate the noise while preserving the desired signal. The controller leverages the DNN's predictions to adaptively adjust its parameters, allowing it to adapt to changing noise conditions and improve noise reduction performance. The approach is evaluated using simulations and real-world acoustic array measurements. The results demonstrate the performance of the DNN-based decoupling and noise attenuation system in reducing noise while preserving the quality of the desired signal. The proposed system offers effective adaptive solutions for enhancing the quality of desired signals in the presence of noise, with potential applications in areas such as speech recognition, audio communication systems, and environmental noise suppression.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

33

Morrison, Christie M., Mélodie Kunegel-Lion, Colin P. Gallagher, Rick J. Wastle, Ellen V. Lea, Tracey N. Loewen, James D. Reist, Kimberly L. Howland und Keith B. Tierney. „Decoupling of otolith and somatic growth during anadromous migration in a northern salmonid“. Canadian Journal of Fisheries and Aquatic Sciences 76, Nr. 11 (November 2019): 1940–53. http://dx.doi.org/10.1139/cjfas-2018-0306.

Der volle Inhalt der Quelle

Annotation:

We assessed the fish length – otolith length relationship (FL–OL) in Dolly Varden (Salvelinus malma malma) to verify proportional growth. A decoupling was detected during first ocean migration where fish growth was occurring at a greater rate than otolith growth. Because of this decoupling, the application of traditional back-calculation models overestimated the size-at-age in premigratory char. We developed modified back-calculation equations from existing traditional models to account for this decoupling based on discontinuous piecewise regressions. The new biological intercept breakpoint method (BI–BP) provided the most accurate representation of fish size-at-age throughout all life history stages when compared with known size-at-capture values in fish. The decoupling indicates that factors other than somatic growth are important for otolith accretion. Physiological changes during smoltification likely alter calcium uptake and thereby affect calcium deposition rates on otoliths during this short but biologically critical time period of life history. It is probable that species exhibiting similar complex ontogenetic shifts in life history will likely exhibit decoupling to some extent in the FL–OL relationship.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

34

Wan, Zeyuan. „Optimization of Decoupling Technology for Control and Stability Enhancement in Photovoltaic Inverters“. Applied and Computational Engineering 123, Nr. 1 (07.01.2025): 255–61. https://doi.org/10.54254/2755-2721/2025.19607.

Der volle Inhalt der Quelle

Annotation:

In solar power systems, photovoltaic (PV) inverters play a crucial role in converting DC power generated by solar panels into AC power for grid integration. The development of decoupling technologies is essential for enhancing system efficiency, ensuring stable operation, and prolonging equipment lifespan. This paper begins by outlining the application context and theoretical foundations of decoupling technology in PV inverters, emphasizing its potential advantages in reducing weight, enhancing overcurrent protection capabilities, and improving system reliability. The paper then addresses the primary challenges encountered during the decoupling process of inverters. These challenges include increased control complexity, energy loss, and electromagnetic compatibility (EMC) issues, all of which present clear targets for subsequent resolution strategies. In response to these challenges, innovative solutions are proposed. By introducing advanced control strategies and optimizing circuit design, the control process can be simplified, and energy losses minimized. Additionally, methods for improving EMC are explored to ensure stable operation of decoupled inverters under various working conditions. The effectiveness and feasibility of the proposed solutions are demonstrated through experimental validation and simulation analysis, providing robust technical support for practical applications. In conclusion, the paper summarizes the research progress in decoupling technology for PV inverters and forecasts future trends. As technological innovation continues, decoupled PV inverters are expected to play a more significant role in improving energy conversion efficiency, reducing costs, and extending service life, thereby providing strong support for sustainable green energy development. Future research will focus on further refining decoupling strategies to accommodate higher power levels and more complex system environments.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

35

Quan, Ling Xiao, De Zhi Tian und Bin Yu. „Simulation Research on Load-Imitating Test Equipment for Hydraulic Drive Unit of a Quadruped Robot Based on Feed-Forward Decoupling Control“. Applied Mechanics and Materials 365-366 (August 2013): 839–46. http://dx.doi.org/10.4028/www.scientific.net/amm.365-366.839.

Der volle Inhalt der Quelle

Annotation:

This paper establishes the simulation model of a load-imitating test equipment for a hydraulic drive unit of a quadruped bionic robot, analyzing load force changes during the work process of the hydraulic drive unit, and researching load-imitating characteristics. A Strategy based on feed-forward decoupling control is proposed to realize the decoupling between the position system and the force system of the load-imitating test equipment to improve load-imitating precision. The results show that control effect of feed-forward decoupling control is satisfactory, and this control strategy can effectively improve load-imitating precision of the test equipment. The research above can also provide theoretical foundation for test application of the hydraulic drive unit.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

36

Rao Kakita, Veera Mohana, Vaibhav Kumar Shukla, Mandar Bopardikar, Tannistha Bhattacharya und Ramakrishna V. Hosur. „Measurement of 1H NMR relaxation times in complex organic chemical systems: application of PSYCHE“. RSC Advances 6, Nr. 102 (2016): 100098–102. http://dx.doi.org/10.1039/c6ra20047h.

Der volle Inhalt der Quelle

Annotation:

In complex organic molecules, relaxation times measured from the PSYCHE homonuclear broadband decoupling methods provide a wealth of information on intramolecular dynamics and intermolecular interactions.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

37

Bekaliyev, A., A. Junissov, Y. Kakimov und S. G. Poulopoulos. „Evaluation of decoupling of GDP and CO₂ emissions in EU-15“. IOP Conference Series: Earth and Environmental Science 899, Nr. 1 (01.11.2021): 012028. http://dx.doi.org/10.1088/1755-1315/899/1/012028.

Der volle Inhalt der Quelle

Annotation:

Abstract Generally, economic growth is accompanied by an increase in energy consumption, which consequently leads to higher levels of greenhouse gas emissions. These, in turn, are the causes of global warming, which is one of the most acute environmental problems nowadays. Decoupling occurs when environmental pressure can be decreased without the negative effect of the economic growth of a country. This study is focused on the investigation of the decoupling of the economy and environmental pressure. The analysis was carried out for EU-15 countries for the period between 1990 and 2014. For the evaluation of decoupling the Tapio decoupling elasticity method was used. This method provides the extent of decoupling of the economy and environmental pressure for each country. The economy was measured in terms of gross domestic product (GDP), while the environmental pressure was represented by CO2 emissions from the public electricity and heat generation sector. The EU-15 countries were classified into three groups depending on the individual reduction targets following Kyoto Protocol. Group I had high values of reduction targets ranging from -28% to -12.5%, Group II had moderate values of reduction targets situated between -7.5% and 0%, and Group III had mild values of reduction targets from +4% to +27%. The results of this analysis show that there is strong fluctuation of the extent of decoupling between GDP and CO2 emissions for each country in the specified period. Therefore, there are no clear patterns of decoupling intensity that can be observed. However, it is important to notice that in almost every country the decoupling between GDP and CO2 emissions was either strong or weak. This study has shown that generally most of the countries achieved some extent of decoupling between the growth of the economy and the pressure on the environment. The countries that showed the decoupling of more than 80% of the specified period are Luxemburg, Ireland, and Italy. For most of the countries, the decoupling was deteriorated by the financial crisis of 2008. Another possible reason for the decrease in decoupling is the extensive use of renewable energy resources. While their application lowers the CO2 emissions, the high production and operation costs constrict the growth of the economy. Sweden, Finland, and Denmark had such situation.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

38

Troch, I. „A New view of the Decoupling Problem for Industrial Robots“. Robotica 9, Nr. 2 (April 1991): 197–202. http://dx.doi.org/10.1017/s0263574700010249.

Der volle Inhalt der Quelle

Annotation:

SUMMARYNonlinear couplings between the various joints of a robotic arm cause trouble in robot control. One possibility to overcome these difficulties is offered by the concept of nonlinear decoupling. The latter leads to independent linear SISO systems, each of them describing the movement of one joint. Thus, an application of control concepts for linear SISO systems is possible. However, at present such decoupling controls are computed from the mathematical model of the arm, the so-called drive equations, whereas actuator dynamics are considered only in a secondary way. In this paper the decoupling problem for robots is investigated by accounting also for the actuator dynamics from the very beginning. This results in decoupling laws requiring a complete state feedback, i.e. not only joint positions and velocities but also the states of the various actuators have to be used. Further, formulas are given which make the computation of those states unsuitable for direct measurements.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

39

Laszlo, Torok. „Correlation of Greenhouse Gas Emissions with Economic Growth in the European Union (2010-2019)“. International Journal of Energy Economics and Policy 13, Nr. 4 (09.07.2023): 102–10. http://dx.doi.org/10.32479/ijeep.14164.

Der volle Inhalt der Quelle

Annotation:

A prominent research area in energy economics is the study of the correlation between economic growth and CO2 emissions. Using the combined application of correlation calculation and cluster analysis based on empirical data, the study typifies and arranges the EU member states into homogeneous groups based on the pattern of the two variables moving together based on data from the period 2010-2019. This methodology allows a test of the "decoupling" theory that can be used to describe the interaction between environmental pressures and economic development. The results can be used to infer the status of clustered Member States in the decoupling process. The results are ambivalent across member countries. For several EU Member States, different degrees of decoupling can be observed, i.e. GDP growth has been accompanied by a reduction of the ecological footprint in those countries. However, there are also member countries where the decoupling did not work, because the reduction of CO2 emissions was accompanied by a decrease in GDP.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

40

Reddy, G. R., H. S. Kushwaha, S. C. Mahajan und K. Suzuki. „Decoupling Criteria for Multi-Connected Equipment“. Journal of Pressure Vessel Technology 120, Nr. 1 (01.02.1998): 93–98. http://dx.doi.org/10.1115/1.2841892.

Der volle Inhalt der Quelle

Annotation:

Generally, for the seismic analysis of nuclear power plant structures, requirement of coupling equipment is checked by applying USNRC decoupling criteria. This criteria is developed for the equipment connected to the structure at one location. In this paper, limitations of this criteria and modifications required for application to real life structures such as pressurized heavy water reactor building are discussed. In addition, the authors endeavor to present a decoupling model for multi-connected structure-equipment. The applicability of the model is demonstrated with pressurized heavy water reactor building internal structure and steam generator.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

41

Zhang, C., G. Zhao, Y. Xiao und X. Yang. „Decoupling Robust Control of Three-Link Direct Drive Robot Arm“. Advanced Materials Research 443-444 (Januar 2012): 258–66. http://dx.doi.org/10.4028/www.scientific.net/amr.443-444.258.

Der volle Inhalt der Quelle

Annotation:

This paper introduces the mechanical structure of a three-link direct drive SCARA for wafer handling application. The dynamic modeling of the presented SCARA is derived and the coupling effect of the system is studied. A decoupling method based on computed torque control is employed in the implementation. Robust control is applied to design the SISO controllers after the system is decoupled. The experimental test results demonstrate satisfying dynamic, settling and static performances by utilizing the decoupling robust control.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

42

Korolchuk, Lesya V. „Decoupling of Economic Growth from Environmental Damage: A Theoretical Aspect“. Scientific Bulletin of Mukachevo State University Series “Economics” 8, Nr. 1 (24.03.2021): 37–45. http://dx.doi.org/10.52566/msu-econ.8(1).2021.37-45.

Der volle Inhalt der Quelle

Annotation:

The relevance of the study is conditioned by the need for an in-depth investigation of decoupling as an indicator of the effectiveness of the state's implementation of the concept of sustainable development, which in the current trends of the world economy is dominant among countries. The purpose of the study is to improve and specify the theoretical foundations of decoupling economic growth from environmental damage. The methodological framework of the study included methods of empirical analysis, synthesis, induction, comparison, hypothetical-deductive method, as well as a systematic approach to the study of scientific papers of Ukrainian and foreign scientists, strategic environmental documents of authoritative international organisations on decoupling. The study identifies three content features of decoupling economic growth from environmental damage, related to the economic growth of the economic system and the environmental damage it causes, as well as two groups of factors of environmental damage: resource and environmental factors. The author has improved the definition of decoupling based on the analysis of existing definitions of this concept, by distinguishing them from common content features and their synthesis into a single whole. Types of decoupling and approaches to the classification of its degrees are considered: according to the method of the Organisation for Economic Cooperation and Development, as well as the author's method of P. Tapio. It was found that absolute decoupling constitutes a priority in the context of the state's implementation of the concept of sustainable development, as it meets the signs of decoupling and the basic principles of sustainable development identified in the course of the study. The study offers ways of effective development and intensification of decoupling processes within the framework of state implementation of the concept of sustainable development. The practical value of the obtained research results is related to their further application in the processes of strategic planning at the national level, as well as in the development of an economic mechanism to stimulate the decoupling of economic growth from environmental damage

APA, Harvard, Vancouver, ISO und andere Zitierweisen

43

Li, Zhihui, Wei Yang, Jingjing Bao, Youmei Kong, Shangchen Jing, Jingying Zhang, Guanhua Ren, Licheng Sun und Min Du. „Reduced graphene oxide/MXene hybrid decorated graphite felt as an effective electrode for vanadium redox flow battery“. RSC Advances 14, Nr. 17 (2024): 12158–70. http://dx.doi.org/10.1039/d4ra01306a.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

44

Chandran, C. Vinod, Günter Hempel und Thomas Bräuniger. „19F-decoupling of half-integer spin quadrupolar nuclei in solid-state NMR: Application of frequency-swept decoupling methods“. Solid State Nuclear Magnetic Resonance 40, Nr. 2 (September 2011): 84–87. http://dx.doi.org/10.1016/j.ssnmr.2011.07.003.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

45

Korolchuk, Lesia. „Application of forecasting methods in harmonising strategic planning for sustainable development of the state“. Economic Forum 14, Nr. 1 (25.11.2023): 50–61. http://dx.doi.org/10.62763/cb/1.2024.50.

Der volle Inhalt der Quelle

Annotation:

Successful implementation of the global concept of sustainable development requires harmonising the strategic planning of sustainable development of the state to ensure effective monitoring of the progress of states in achieving the Sustainable Development Goals. The purpose of the research is to actualise the problem of applying forecasting methods in the process of harmonising the strategic planning of the sustainable development of the state and to develop methodological tools for its solution. In the course of the study, based on the application of such methods as: literature review, hypothetical-deductive method, comparison method, empirical method and logical analysis, the expediency is substantiated, methodological tools are developed and the method of triple exponential Holt-Winters smoothing based on a long time series is tested using the Forecast Sheet in Microsoft Excel 2016. Within the framework of a harmonised approach to strategic planning for sustainable development, to assess the country’s progress in sustainable development, the indicators of decoupling of environmental pressure from economic growth are used, as they are simple, measurable and flexible. Based on the Tapio’s methodology, a norm of non-renewable resource decoupling and environmental impact decoupling indicators is determined as a benchmark for the development and analysis of the effectiveness of the national sustainable development strategy, and a forecast of the dynamics of these indicators in the EU as a whole until 2026 is made, as a leader in the greening of the economy. The findings allowed us to identify the main trends in the EU’s sustainable development, basing on the classification of the decoupling status. The results obtained contribute to the harmonisation of national strategies to ensure the successful implementation of the global concept of sustainable development, can be used at such a stage of strategic planning as the formation of a goal tree, which makes it possible to set both attainable and relevant goals, as well as in assessing the effectiveness of strategies in achieving the Sustainable Development Goals

APA, Harvard, Vancouver, ISO und andere Zitierweisen

46

Gao, Lei, Wei Ming Tong und Fan Gang Meng. „Asymmetrical Decoupling Model of Six-Phase Autotransformer and its Application“. Advanced Materials Research 403-408 (November 2011): 4089–93. http://dx.doi.org/10.4028/www.scientific.net/amr.403-408.4089.

Der volle Inhalt der Quelle

Annotation:

In order to analyze the effect of asymmetry of phase-shift transformer on 12-pulse ac-dc converter, this paper sets up a decoupling model of delta-connected autotransformer. Via analyzing coupling circuit of autotransformer, the relation among branch voltage, branch current, node voltage and node current is built, and base on the relation, an admittance matrix containing the information about the connection way and electrical quantities is concluded. Utilizing the matrix, the proposed model is established. Simulation and experimental results show the validity of the model when simulating the asymmetry of delta-connected transformer

APA, Harvard, Vancouver, ISO und andere Zitierweisen

47

Chai, Tianyou, Heng Yue und Lianfei Zhai. „INTELLIGENT DECOUPLING CONTROL SYSTEM OF COMPLEX INDUSTRIAL PROCESS AND APPLICATION“. IFAC Proceedings Volumes 38, Nr. 1 (2005): 70–75. http://dx.doi.org/10.3182/20050703-6-cz-1902.01090.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

48

Hatono, Hironori, Tomokazu Ito und Akihiko Matsumura. „Application of BaTiO3Film Deposited by Aerosol Deposition to Decoupling Capacitor“. Japanese Journal of Applied Physics 46, Nr. 10B (22.10.2007): 6915–19. http://dx.doi.org/10.1143/jjap.46.6915.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

49

Commault, C., J. M. Dion und V. Hovelaque. „A geometric approach for structured systems: Application to disturbance decoupling“. Automatica 33, Nr. 3 (März 1997): 403–9. http://dx.doi.org/10.1016/s0005-1098(96)00186-0.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

50

Mårtensson, Anders, und Pablo Valiente. „Understanding migration strategies by decoupling application roles and technology generations“. Technovation 26, Nr. 3 (März 2006): 351–58. http://dx.doi.org/10.1016/j.technovation.2004.11.004.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

Wir bieten Rabatte auf alle Premium-Pläne für Autoren, deren Werke in thematische Literatursammlungen aufgenommen wurden. Kontaktieren Sie uns, um einen einzigartigen Promo-Code zu erhalten!