Bücher zum Thema „Damping (Mechanics)“

G, Jones David I., und Henderson John P. 1934-, Hrsg. Vibration damping. New York: Wiley, 1985.

T, Sun C. Vibration damping of structural elements. Englewood Cliffs, N.J: Prentice Hall PTR, 1995.

D, Johnson Conor, American Society of Mechanical Engineers., Society of Photo-optical Instrumentation Engineers. und U.S. Air Force Wright Laboratory., Hrsg. Smart structures and materials, 1996.: 26-27 February 1996, San Diego, California. Bellingham, Wash., USA: SPIE, 1996.

Córdova, Carlos Juán Cornejo. Elastodynamics with hysteretic damping. Delft, Netherlands: DUP Science, 2002.

T, Sun C. Vibration damping of structural elements. Englewood Cliffs, N.J: PTR Prentice Hall, 1995.

Banks, H. Thomas. On damping mechanisms in beams. [Hampton, Va: National Aeronautics and Space Administration, Langley Research Center, 1989.

Chen, Goong. Vibration and damping in distributed systems. Boca Raton, FL: CRC Press, 1993.

1946-, Kinra Vikram K., und Wolfenden Alan 1940-, Hrsg. M³D: Mechanics and mechanisms of material damping. Philadelphia: ASTM, 1992.

Rivin, Eugene I. Stiffness and damping in mechanical design. New York: Marcel Dekker, 1999.

Dew, Dwight D. Strain dependent damping characteristics of a high damping manganese-copper alloy. Monterey, Calif: Naval Postgraduate School, 1986.

Structural vibration: Analysis and damping. London: Arnold, 1996.

Henrichfreise, Hermann. Aktive Schwingungsdämpfung an einem elastischen Knickarmroboter. Braunschweig: F. Vieweg, 1989.

W, De Silva Clarence, Hrsg. Vibration damping, control, and design. Boca Raton: Taylor & Francis, 2007.

M, Eke Estelle, und United States. National Aeronautics and Space Administration., Hrsg. Damping characterization in large structures: Final technical report ... January 1, 1989 - December 31, 1990. Tuskegee, Ala: School of Engineering and Architecture, Tuskegee University, 1991.

United States. National Aeronautics and Space Administration., Hrsg. Measurement of damping of graphite epoxy materials: Progress report no. 9. [Washington, DC: National Aeronautics and Space Administration, 1985.

George C. Marshall Space Flight Center., Hrsg. Measurement of damping of graphite epoxy materials: [progress report no. 6]. [Huntsville, AL?: National Aeronautics and Space Administration, George C. Marshall Space Flight Center, 1985.

Black, Cameron J. Viscous heating of fluid dampers under wind and seismic loading: Experimental studies, mathematical modeling and design formulae. Berkeley: Dept. of Civil and Environmental Engineering, University of California, 2005.

Black, Cameron J. Viscous heating of fluid dampers under wind and seismic loading: Experimental studies, mathematical modeling and design formulae. Berkeley: Dept. of Civil and Environmental Engineering, University of California, 2005.

Black, Cameron J. Viscous heating of fluid dampers under wind and seismic loading: Experimental studies, mathematical modeling and design formulae. Berkeley: Dept. of Civil and Environmental Engineering, University of California, 2005.

T, Soong T., und Constantinou M. C, Hrsg. Passive and active structural vibration control in civil engineering. Wien: Springer-Verlag, 1994.

Inman, Daniel J. Vibration with Control. New York: John Wiley & Sons, Ltd., 2006.

Abernathy, J. Michael. Computational fluid mechanics utilizing the variational principle of modeling damping seals: Final report. Huntsville, AL: Continuum, Inc., 1986.

Abernathy, J. Michael. Computational fluid mechanics utilizing the variational principle of modeling damping seals. Marshall Space Flight Center, AL: The Center, 1985.

D, Buehrle Ralph, und Langley Research Center, Hrsg. Structural damping studies at cryogenic temperatures. Hampton, Va: National Aeronautics and Space Administration, Langley Research Center, 1994.

Wolfenden, A., und VK Kinra, Hrsg. M3D III: Mechanics and Mechanisms of Material Damping. 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959: ASTM International, 1997. http://dx.doi.org/10.1520/stp1304-eb.

K, Karim-Panahi, American Society of Mechanical Engineers. Pressure Vessels and Piping Division., American Society of Mechanical Engineers. Materials Division., American Society of Mechanical Engineers. Nondestructive Evaluation Engineering Division. und Pressure Vessels and Piping Conference (1995 : Honolulu, Hawaii), Hrsg. Advances in vibration issues, active and passive vibration mitigation, damping and seismic isolation: Presented at the 1995 Joint ASME/JSME Pressure Vessels and Piping Conference, Honolulu, Hawaii, July 23-27, 1995. New York: American Society of Mechanical Engineers, 1995.

G, Gordon Colin, und Society of Photo-optical Instrumentation Engineers., Hrsg. Vibration monitoring and control: 28-29 July 1994, San Diego, California. Bellingham, Wash: SPIE--the International Society for Optical Engineering, 1994.

M, Alabuzhev P., und Rivin Eugene I, Hrsg. Vibration protecting and measuring systems with quasi-zero stiffness. New York: Hemisphere Pub. Corp., 1989.

Tondl, Aleš. Quenching of self-excited vibrations. Amsterdam: Elsevier, 1991.

Osiński, Jerzy. Drgania parametryczne tłumionych układów dyskretno-ciągłych. Warszawa: Wydawnictwa Politechniki Warszawskiej, 1989.

F, Hara, American Society of Mechanical Engineers. Prssure Vessels and Piping Division. und Pressure Vessels and Piping Conference (1991 : San Diego, Calif.), Hrsg. Active and passive damping, 1991: Presented at the 1991 Pressure Vessels and Piping Conference, San Diego, California, June 23-27, 1991. New York, N.Y: American Society of Mechanical Engineers, 1991.

Vertrieb, VDI-Gesellschaft Entwicklung Konstruktion, Hrsg. Dämpfung von Schwingungen bei Maschinen und Bauwerken: Tagung Nürnberg, 9. und 10. April 1987. Düsseldorf: VDI Verlag, 1987.

M, Reznikov L., Hrsg. Dinamicheskie gasiteli kolebaniĭ: Teorii͡a︡ i tekhnicheskie prilozhenii͡a︡. Moskva: "Nauka," Glav. red. fiziko-matematicheskoĭ lit-ry, 1988.

Matveev, Valentin Vladimirovich. Dempfirovanie kolebaniĭ deformiruemykh tel. Kiev: Nauk. dumka, 1985.

Duan, Yuanfeng. Vibration control of stay cables using semi-active magneto-rheological (MR) dampers. Hong Kong: Dept. of Civil & Structural Engineering, the Hong Kong Polytechnic University, 2004.

Mechanical vibrations. Hoboken, NJ: John Wiley, 2006.

B, Bhagat Ram, ASM International. Materials Science Division., ASM International. Structural Materials Division. und ASM Materials Week (1992 : Chicago, Ill.), Hrsg. Damping of multiphase inorganic materials: Proceedings of the Damping of Multiphase Inorganic Materials Symposium, ASM Materials Week, 2-5 November 1992, Chicago, Illinois, USA. Materials Park, Ohio: ASM International, 1993.

United States. National Aeronautics and Space Administration., Hrsg. Nonlinear damping model for flexible structures: Technical report. Los, Angeles, Calif: Flight Sysltems Research Laboratory, University of California, Los Angeles, School of Engineering and Applied Science, 1990.

A, Derby Eddy, und Society of Photo-optical Instrumentation Engineers., Hrsg. Optomechanical engineering and vibration control: 20-23 July 1999, Denver, Colorado. Bellingham, Wash., USA: SPIE, 1999.

C, Goldsby Jon, und United States. National Aeronautics and Space Administration., Hrsg. Damping mechanisms in chemically vapor deposited SiC fibers. [Washington, D.C.?]: NASA, 1993.

Osinski. Damping Vibrations. Taylor & Francis, 1998.

Damping Vibrations. Taylor & Francis, 1998.

Osinski, Z. Damping of Vibrations. Taylor & Francis Group, 2018.

Osinski, Z. Damping of Vibrations. Taylor & Francis Group, 2018.

Osinski, Z. Damping of Vibrations. Taylor & Francis Group, 2018.

Osinski, Z. Damping of Vibrations. Taylor & Francis Group, 2018.

Baz, Amr M. Active and Passive Vibration Damping. Wiley & Sons, Incorporated, John, 2018.

Baz, Amr M. Active and Passive Vibration Damping. Wiley & Sons, Limited, John, 2018.

Baz, Amr M. Active and Passive Vibration Damping. Wiley & Sons, Incorporated, John, 2018.

Silva, Clarence W. de. Vibration Damping, Control, and Design. Taylor & Francis Group, 2007.