Bücher zum Thema „Composite construction Testing“

Woldegiorgis, Berhanu F. Some behavioural aspects of composite trusses. Edmonton, Alta., Canada: Dept. of Civil Engineering, University of Alberta, 1994.

Maurer, Michael B. Shrinkage and flexural tests of a full-scale composite truss. Edmonton, Alta., Canada: Dept. of Civil Engineering, University of Alberta, 1994.

Thompson, David P. Structural load testing of Gemini single joist composite floor system. [Edmonton, Alta.]: Alberta Municipal Affairs, Innovative Housing Grants Program, 1989.

Walker, Sandra P. Evaluation of composite honeycomb sandwich panels under compressive loads at elevated temperatures. Hampton, Va: National Aeronautics and Space Administration, Langley Research Center, 1998.

International, Conference (CDCC 02) (2nd 2002 Montréal Québec). Durability of fiber reinforced polymer (FRP) composites for construction: Proceedings of the second International Conference (CDCC 02) Montréal (Quebec) Canada, May 29-31, 2002. Sherbrooke, Québec: Department of Civil Engineering, Université de Sherbrooke, 2002.

CDCC, (International Conference) (2nd 2002 Montréal Québec). Durability of fiber reinforced polymer (FRP) composites for construction =: Durabilité des composites en polymères renforcés de fibres (PRF) pour la construction : proceedings of the 2nd International Conference (CDCC 02), Montréal (Québec) Canada, May 29-31, 2002 : comptes rendus de la deuxième Conférence Internationale (CDCC 02), Montréal (Québec) Canada, 29-31 mai 2002. Sherbrooke: Department of Civil Engineering, Université de Sherbrooke, 2002.

Steckel, G. L. The application of qualification testing, field testing, and accelerated testing for estimating long-term durability of composite materials for Caltrans applications. El Segundo, CA: Engineering and Technology Group, The Aerospace Corporation, 2005.

Grace, Nabil F. Environmental/durability evaluation of FRP composite strengthened bridges. Southfield, Mich: Lawrence Technological University, Civil Engineering Dept., 2003.

Vick, Charles B. Lamination of composite framing with melamine-formaldehyde adhesive and radio-frequency curing. Asheville, NC: U.S. Dept. of Agriculture, Forest Service, Southeastern Forest Experiment Station, 1986.

Fontana, Mario. New types of shear connectors with powder-actuated fasteners. Zurich: Institut für Baustatik und Konstruktion ETH Zürich, 2002.

Miller, Nathan J. Use of salvaged utility poles in roadway bridges: Time-dependent behavior of composite wood-concrete beams. Fargo, N.D.]: Mountain-Plains Consortium, 2009.

European Symposium on Performance of Bituminous and Hydraulic Materials in Pavements (4th 2002 Nottingham, U.K.). Performance of bituminous and hydraulic materials in pavements: Proceedings of the Fourth European Symposium on Performance of Bituminous and Hydraulic Materials in Pavements, Bitmat 4, Nottingham, United Kingdom, 11-12 April 2002. Lisse [Netherlands]: A.A. Balkema, 2002.

Vick, Charles B. Lamination of hardwood composite framing with an emulsion polymer-isocyanate adhesive and radio-frequency curing. Asheville, N.C: U.S. Dept. of Agriculture, Forest Service, Southeastern Forest Experiment Station, 1987.

Ko, William L. Open-mode debonding analysis of curved sandwich panels subjected to heating and cryogenic cooling on opposite faces. Edwards, Calif: National Aeronautics and Space Administration, Dryden Flight Research Center, 1999.

Generazio, Edward R. Ultrasonic and radiographic evaluation of advanced aerospace material: Ceramic composites. [Washington, D.C.]: NASA, 1990.

Generazio, Edward R. Ultrasonic and radiographic evaluation of advanced aerospace material: Ceramic composites. [Washington, D.C.]: NASA, 1990.

Kachlakev, Damian I. Testing of full-size reinforced concrete beams strengthened with FRP composites: Experimental results and design methods verification. Salem, OR: Oregon Dept. of Transportation, Research Group, 2000.

Kachlakev, Damian I. Testing of full-size reinforced concrete beams strengthened with FRP composites: Experimental results and design methods verification. Salem, OR: Oregon Dept. of Transportation, Research Group, 2000.

Conference on Critical Issues in the Development of High Temperature Structural Materials (1993 Kailua Kona, Hawaii). Critical issues in the development of high temperature structural materials: Proceedings from the Conference on Critical Issues in the Development of High Temperature Structural Materials, held in Kona, Hawaii, March 7-14, 1993. Warrendale, Pa: Minerals, Metals & Materials Society, 1993.

N, Swamy R., International Union of Testing and Research Laboratories for Materials and Structures. und University of Sheffield. Dept. of Mechanical and Processd Engineering., Hrsg. Fibre reinforced cement and concrete: Proceedings of the fourth international symposium held by RILEM (the International Union of Testing and Research Laboratories for Materials and Structures) and organized by the Department of Mechanical and Process Engineering, University of Sheffield, UK, Sheffield, July 20-23, 1992. London: E & FN Spon, 1992.

1945-, Reddy J. N., Krishna Murty A. V und Indo-U.S. Workshop on Aerospace Applications (1990 : Bangalore, India), Hrsg. Composite structures: Testing, analysis and design. New Delhi: Narosa Publishing House, 1992.

Buragohain, Manoj Kumar. Composite Structures: Design, Mechanics, Analysis, Manufacturing, and Testing. Taylor & Francis Group, 2017.

Buragohain, Manoj Kumar. Composite Structures: Design, Mechanics, Analysis, Manufacturing, and Testing. Taylor & Francis Group, 2017.

Buragohain, Manoj Kumar. Composite Structures: Design, Mechanics, Analysis, Manufacturing, and Testing. Taylor & Francis Group, 2017.

Buragohain, Manoj Kumar. Composite Structures: Design, Mechanics, Analysis, Manufacturing, and Testing. Taylor & Francis Group, 2017.

Buragohain, Manoj Kumar. Composite Structures: Design, Mechanics, Analysis, Manufacturing, and Testing. Taylor & Francis Group, 2017.

Buragohain, Manoj Kumar. Composite Structures: Design, Mechanics, Analysis, Manufacturing, and Testing. Taylor & Francis Group, 2017.

Tensile strength of an interlocking composite connection. Gaithersburg, MD: U.S. Dept. of Commerce, Technology Administration, National Institute of Standards and Technology, 2000.

National Institute of Standards and Technology (U.S.), Hrsg. Tensile strength of an interlocking composite connection. Gaithersburg, MD: U.S. Dept. of Commerce, Technology Administration, National Institute of Standards and Technology, 2000.

Reis, Henrique L. M. dos., Djordjevic B. Boro und American Society for Nondestructive Testing., Hrsg. Nondestructive testing and evaluation of infrastructure. Columbus, OH: American Society for Nondestructive Testing, Inc., 1998.

Theodor, Löffler, Hrsg. Fire behaviour of composite structures in steel and concrete. Stuttgart: IRB Verlag, 1989.

Kunwar, Bajpai, und National Institute of Standards and Technology (U.S.), Hrsg. Strength of an interlocking FRP connection. Gaithersburg, MD: U.S. Dept. of Commerce, Technology Administration, National Institute of Standards and Technology, 2001.

Bridge design and performance and composite materials. Washington, D.C: Transportation Research Board, National Research Council, 1989.

E, Bonilla Francisco, Texas. State Dept. of Highways and Public Transportation., United States. Federal Highway Administration. und Texas Transportation Institute, Hrsg. Composite action of precast panel bridge decks in negative moment regions. College Station, Tex: Texas Transportation Institute, Texas A&M University, 1987.

Center, Langley Research, Hrsg. Evaluation of a composite sandwich fuselage side panel with damage and subjected to internal pressure. Hampton, Va: Langley Research Center, 1997.

Pultrusion process development for long space boom model. [Washington, D.C.]: National Aeronautics and Space Administration, Scientific and Technical Information Division, 1988.

NASA Dryden Flight Research Center., Hrsg. Open-mode debonding analysis of curved sandwich panels subjected to heating and cryogenic cooling on opposite faces. Edwards, Calif: National Aeronautics and Space Administration, Dryden Flight Research Center, 1999.

NASA Dryden Flight Research Center., Hrsg. Open-mode debonding analysis of curved sandwich panels subjected to heating and cryogenic cooling on opposite faces. Edwards, Calif: National Aeronautics and Space Administration, Dryden Flight Research Center, 1999.

NASA Dryden Flight Research Center., Hrsg. Open-mode debonding analysis of curved sandwich panels subjected to heating and cryogenic cooling on opposite faces. Edwards, Calif: National Aeronautics and Space Administration, Dryden Flight Research Center, 1999.

NASA Dryden Flight Research Center., Hrsg. Open-mode debonding analysis of curved sandwich panels subjected to heating and cryogenic cooling on opposite faces. Edwards, Calif: National Aeronautics and Space Administration, Dryden Flight Research Center, 1999.

C, Maso J., und RILEM. Technical Committee 108., Hrsg. Interfaces in cementitious composities: Proceedings of the International Conference held by RILEM (TheInternational Union of Testing and Research Laboratories for Materials and Construction) at the Université Paul Sabatier, Toulouse ... October 21-23 1992. London: Spon, 1993.

Interfaces in cementitious composites: Proceedings of the international conference held by RILEM (the International Union of Testing and Research Laboratories for Materials and Construction) at the Université Paul Sabatier, Toulouse, and organised by RILEM Technical Committee 108 and the Laboratory for Materials and Durability of Constructions (LMDC), INSA-UPS, Toulouse, France : Toulouse, October 21-23, 1992. London: E & FN Spon, 1993.

Roesler, J., H. Harders und M. Baeker. Mechanical Behaviour of Engineering Materials: Metals, Ceramics, Polymers, and Composites. Springer, 2007.

Duquette, D. J., und N. S. Stoloff. Critical Issues in the Development of High Temperature Structural Materials: Proceedings from the Conference on Critical Issues in the Development of. Minerals, Metals, & Materials Society, 1993.