Auswahl der wissenschaftlichen Literatur zum Thema „Clay-Based mixtures“
Geben Sie eine Quelle nach APA, MLA, Chicago, Harvard und anderen Zitierweisen an
Inhaltsverzeichnis
Machen Sie sich mit den Listen der aktuellen Artikel, Bücher, Dissertationen, Berichten und anderer wissenschaftlichen Quellen zum Thema "Clay-Based mixtures" bekannt.
Neben jedem Werk im Literaturverzeichnis ist die Option "Zur Bibliographie hinzufügen" verfügbar. Nutzen Sie sie, wird Ihre bibliographische Angabe des gewählten Werkes nach der nötigen Zitierweise (APA, MLA, Harvard, Chicago, Vancouver usw.) automatisch gestaltet.
Sie können auch den vollen Text der wissenschaftlichen Publikation im PDF-Format herunterladen und eine Online-Annotation der Arbeit lesen, wenn die relevanten Parameter in den Metadaten verfügbar sind.
Zeitschriftenartikel zum Thema "Clay-Based mixtures"
Lu, Zhen, Aimin Sha und Wentong Wang. „Permeability Evaluation of Clay-quartz Mixtures Based on Low-Field NMR and Fractal Analysis“. Applied Sciences 10, Nr. 5 (27.02.2020): 1585. http://dx.doi.org/10.3390/app10051585.
Der volle Inhalt der QuelleGao, Xiaojing, Qiusheng Wang und Guowei Ma. „Experimental Investigation on the Erosion Threshold and Rate of Gravel and Silty Clay Mixtures“. Transactions of the ASABE 62, Nr. 4 (2019): 867–75. http://dx.doi.org/10.13031/trans.13290.
Der volle Inhalt der QuelleDafalla, Muawia. „Predicting Swell in Clay-Sand Mixtures Used in Liners“. Applied Sciences 13, Nr. 20 (11.10.2023): 11161. http://dx.doi.org/10.3390/app132011161.
Der volle Inhalt der QuellePanchenko, Alexander I., Vitaliy N. Solov’ev, Nikita A. Tretyakov, Alexander D. Chernov und Ilmir R. Shaykhalov. „Evaluation of thixotropy of clay-gypsum based plaster“. Stroitel stvo nauka i obrazovanie [Construction Science and Education], Nr. 4 (31.12.2019): 6. http://dx.doi.org/10.22227/2305-5502.2019.4.6.
Der volle Inhalt der QuelleAlqenaee, Amnah Y., Ali M. Memari und Maryam Hojati. „TRANSITION FROM TRADITIONAL COB CONSTRUCTION TO 3D PRINTING OF CLAY HOMES“. Journal of Green Building 16, Nr. 4 (01.09.2021): 3–28. http://dx.doi.org/10.3992/jgb.16.4.3.
Der volle Inhalt der QuelleLiutyi, R., M. Fyodorov, M. Fesenko und D. Liuta. „REGULATION OF THE PROPERTIES OF SAND-CLAY MOLDING MIXTURES BY SODIUM PHOSPHATE ADDITIONS“. New Materials and Technologies in Metallurgy and Mechanical Engineering, Nr. 2 (20.06.2023): 38–45. http://dx.doi.org/10.15588/1607-6885-2023-2-6.
Der volle Inhalt der QuelleNi, Jing, Gang-Lai Hao, Jia-Qi Chen, Lei Ma und Xue-Yu Geng. „The Optimisation Analysis of Sand-Clay Mixtures Stabilised with Xanthan Gum Biopolymers“. Sustainability 13, Nr. 7 (26.03.2021): 3732. http://dx.doi.org/10.3390/su13073732.
Der volle Inhalt der QuelleAsamatdinov, Marat, Ekaterina Shokodko, Andrey Ushakov, Igor Bessonov, Sergey Kozlov und Artem Zhukov. „Composition and rheological characteristics of plaster mixtures“. E3S Web of Conferences 97 (2019): 02006. http://dx.doi.org/10.1051/e3sconf/20199702006.
Der volle Inhalt der QuelleBensalem, Sara, Mohamed Lyes Kamel KHOUADJIA, Kamel Abdou, Ahmed Abderraouf Belkadi und Oussama Kessal. „Experimental Evaluation of Workability Compressive Strength and Freeze-Thaw Durability of Concrete Containing Expanded Clay Aggregates“. Aceh International Journal of Science and Technology 11, Nr. 2 (05.09.2022): 145–54. http://dx.doi.org/10.13170/aijst.11.2.25028.
Der volle Inhalt der QuelleAsamatdinov, Marat, Аlexey Zhukov, Andrey Medvedev und Vitaly Mukhametzyanov. „Fire protection systems using clay-gypsum plaster in agriculture“. E3S Web of Conferences 175 (2020): 11008. http://dx.doi.org/10.1051/e3sconf/202017511008.
Der volle Inhalt der QuelleDissertationen zum Thema "Clay-Based mixtures"
Nejmeh, Kassem. „Enhancing adhesion and Water Resistance in Clayey adhesives Mixtures : Strategies for Vertical and Horizontal Applications“. Electronic Thesis or Diss., Université Gustave Eiffel, 2024. http://www.theses.fr/2024UEFL2012.
Der volle Inhalt der QuelleEarthen material has long been favored in building construction for its eco-friendly characteristics. Fine clay particles play a crucial role in enhancing the cohesion of such materials. This research focuses on exploring clay-based mixtures as potential substitutes for traditional tile adhesives used on concrete slabs. The objective is to develop a material that exhibits strong adhesion resistance and maintains its integrity even when submerged in water. Considering the porous nature of the clay mixture, adherence to specific drying conditions and immersion periods becomes crucial.The initial stage of the investigation involves conducting a mechanical test to measure the adhesive stress of the material before and after water immersion. A reference soil sample serves as the baseline for evaluating this stress. To influence the mechanical properties, we introduce a proportional amount of polymers or fibers into the reference soil, aiming to alter its cohesive attributes. The selection of polymers or fibers is strategic, intended to induce changes in the material's mechanical properties and its resistance to water.In the subsequent phase, the study focuses on understanding the drying process and imbibition kinetics following the addition of polymers. Additionally, we provide evidence that the choice of polymer significantly affects the kinetics of immersion and the degree of water absorption.The research approach unfolds in three distinctive scenarios: firstly, we enhance the strength of the mortar by incorporating diverse polymers and fibers; secondly, we aim to impede water absorption into the adhesive; and finally, we endeavor to develop a reversible adhesive capable of reclaiming its mechanical strength after experiencing loss due to immersion, solely through a drying process. Moreover, we devise strategies specific to different application methods, addressing both vertical and horizontal applications
Terner, Mark Robert. „The production of low-cost α-sialons via carbothermal reduction-nitridation of slag-based mixtures“. Monash University, School of Physics and Materials Engineering, 2003. http://arrow.monash.edu.au/hdl/1959.1/9577.
Der volle Inhalt der QuelleBuchteile zum Thema "Clay-Based mixtures"
Huang, G., Y. Zhuge, T. Benn und Y. Liu. „Optimisation of Limestone Calcined Clay Cement Based on Response Surface Method“. In Lecture Notes in Civil Engineering, 103–12. Singapore: Springer Nature Singapore, 2023. http://dx.doi.org/10.1007/978-981-99-3330-3_13.
Der volle Inhalt der QuelleBeigh, Mirza A. B., Venkatesh N. Nerella, Christof Schröfl und Viktor Mechtcherine. „Studying the Rheological Behavior of Limestone Calcined Clay Cement (LC3) Mixtures in the Context of Extrusion-Based 3D-Printing“. In RILEM Bookseries, 229–36. Singapore: Springer Singapore, 2020. http://dx.doi.org/10.1007/978-981-15-2806-4_26.
Der volle Inhalt der QuelleGharzouni, Ameni, Clément Alizé und Sylvie Rossignol. „Fire Resistant Geopolymers Based on Several Clays Mixtures“. In Clay and Clay Minerals [Working Title]. IntechOpen, 2021. http://dx.doi.org/10.5772/intechopen.98566.
Der volle Inhalt der QuelleCui, Yu-Jun, Anh-Minh Tang, Cyril Loiseau und Pierre Delage. „A microstructure-based constitutive model for the hydro-mechanical coupling in compacted clay/sand mixtures“. In Geomechanics and Geotechnics, 23–27. CRC Press, 2010. http://dx.doi.org/10.1201/b10528-7.
Der volle Inhalt der QuelleHernando Aramburo Varela, Carlos, Luiz Felipe de Pinho, César Pedrajas Nieto-Márquez und Rafael Talero Morales. „Activated Clays and Their Potential in the Cement Industry“. In Clay and Clay Minerals [Working Title]. IntechOpen, 2021. http://dx.doi.org/10.5772/intechopen.99461.
Der volle Inhalt der QuelleBohacs, K. M., O. R. Lazar, R. D. Wilson und J. H. S. Macquaker. „12 Mowry Shale–Belle Fourche Shale, Bighorn Basin, Wyoming, USA—A Mesozoic Clastic-Biosiliceous Shelf System: A Prolific Source Rock with Associated Mudstone Reservoir Potential“. In Sequence Stratigraphy: Applications to Fine-Grained Rocks, 395–474. The American Association of Petroleum Geologists and Brazilpetrostudies, 2022. http://dx.doi.org/10.1306/137123071283.
Der volle Inhalt der Quelle„minutes retention depending on the oil processed. Then, Synthetic silica hydrogels: Described in the immediately the oil is heated to 70°C, (158°F) to assist "breaking" the preceding section. emulsion and the mixture is passed through a primary (first) centrifuge. The general dosage of acid-activated bleaching earths is 0.3-0.6%, depending on the quality of the oil and bleach-In contrast, the short-mix process, developed in Europe, ing earth. Bleaching earths provide catalytic sites for de-is conducted at 90°C (84°F), uses a more highly concen-composition of oxidation products. Peroxide values (mea-trated caustic, and a mixing time and primary centrifuging sure of aldehydes) and p-anisidine values (precursors for time of less than 1 minute [135]. Less heat damage to the oxidative degradation) first rise and then decrease during oil and higher refining yield are claimed by advocates of bleaching. Bleaching processes used include atmospheric the long mix process. batch, vacuum batch, and continuous vacuum. Vacuum 4. Silica Absorption bleaching has the advantage of excluding air, partially by In traditional refining, oil from the primary centrifuge is vaporization of water in the earth, and is recommended. A washed with warm soft water to remove residual soap and typical vacuum bleaching process is 20-30 minimum at passed through a (secondary) centrifuge. The washed oil 100-110°C (212-230°F) and 50 mmHg absolute [135]. then is dried under vacuum. However, disposal of wash The reactions catalyzed during bleaching continue into water is increasingly becoming a problem, and the indus-the filter bed and are known as the "press bleaching ef-try is shifting to a modified caustic "waterless" refining fect." The reactive components of oil remain in the bleach-process. Soaps poison the adsorption sites of clays in later ing bed. Care should be taken to "blow" the filter press as bleaching operations and are removed by silica hydrogels. free of oil as possible and to wet the filter cake (which can The oil may be degummed with use of chelating acids, be very dusty) to prevent spontaneous combustion [137]. caustic neutralized, passed through a primary centrifuge, At this point, the product is RB ("refined, bleached") and may be partially vacuum-dried. Synthetic silica hy-oil. If the intended product is an oil, it can be sent to the de-drogels, effective in removing 7-25 times more phos-odorizer and become RBD. If solids are desired, the solids-phatides and soaps than clay on a solids basis, and for re-temperature profile of the oil may be modified by hydro-moving phosphorus and the major metal ions, is added genation, interesterification, or chill fractionation, alone or and mixed with the oil. By absorbing these contaminants in combination. first, the bleaching clay is spared for adsorbing chloro-6. Hydrogenation phyll and the oxidation-degradation products of oil Hydrogenation is the process of adding hydrogen to satu-[136-138]. rate carbon-to-carbon double bonds. It is used to raise try-5. Bleaching glyceride melting points and to increase stability as by jective of bleaching is to remove various contami-converting linolenic acid to linoleic in soybean oil [141]. A The ob lighter, "brush" hydrogenation is used for the latter pur-nants, pigments, metals, and oxidation products before the pose. oil is sent to the deodorizer. Removal of sulfur is especial-Most of the catalysts that assist hydrogenation are nick-ly important before hydrogenation of canola and rapeseed el-based, but a variety is available for special applications. oils. Flavor of the oil also is improved. As mentioned in the "Selectivity" refers to ability of the catalyst and process to preceding section, silica hydrogels will adsorb many of sequentially saturate fatty acids on the triglycerides in the these contaminants and spare the bleaching earth. Howev-order of most unsaturated to the fully saturated. For row er, earths are still used for these purposes in installations crop oils, perfect selectivity would be: that have not adopted hydrated silicas. Types of bleaching materials available include [136,139,140]: C18:3 C18:2 C18:1 Linolenic acid Linoleic acid Oleic acid Neutral earths: Basically hydrated aluminum silicates, sometimes called "natural clays" or "earths," and C18:0 fuller's earth, which vary in ability to absorb pigments. Stearic acid Acid-activated earths: Bentonites or montmorillonites, Although typical hydrogenation is not selective, it can be treated with hydrochloric or sulfuric acid to improve favored to a limited degree by selection of catalyst and by their absorption of pigments and other undesirable temperature and pressure of the process. Efficient hydro-components, are most commonly used. genation requires the cleanest possible feed stock (without Activated carbon: Expensive, more difficult to use, but of soaps, phosphatides, sulfur compounds, carbon monoxide, special interest for adsorbing polyaromatic hydrocar-nitrogen compounds, or oxygen-containing compounds) bons from coconut and fish oils. and the purest, driest hydrogen gas possible [140].“ In Handbook of Cereal Science and Technology, Revised and Expanded, 361–73. CRC Press, 2000. http://dx.doi.org/10.1201/9781420027228-35.
Der volle Inhalt der QuelleKonferenzberichte zum Thema "Clay-Based mixtures"
Alkindi, Tawaddod, Mozah Alyammahi und Rahmat Agung Susantyoko. „Investigation and Characterization of Clay Mixture Feedstock for Extrusion-Based Additive Manufacturing“. In ASME 2020 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2020. http://dx.doi.org/10.1115/imece2020-23715.
Der volle Inhalt der QuelleStelescu, Maria Daniela, Mihai Georgescu, Maria Sonmez, Mihaela Nituica und Adriana Stefan. „Elastomeric nanomaterials based on natural rubber for the food industry“. In The 8th International Conference on Advanced Materials and Systems. INCDTP - Leather and Footwear Research Institute (ICPI), Bucharest, Romania, 2020. http://dx.doi.org/10.24264/icams-2020.iv.23.
Der volle Inhalt der QuelleDuartey, K. O., A. K. Quainoo und C. K. Darko. „Evaluation Studies of KCl and Amino Acid Mixtures for Clay Stabilization and Rheological Enhancement of Water-Based Fracturing Fluids“. In SPE Nigeria Annual International Conference and Exhibition. SPE, 2023. http://dx.doi.org/10.2118/217118-ms.
Der volle Inhalt der QuelleBaghbani, A. „Predicting the strength of recycled glass powder-based geopolymers for improving mechanical behavior of clay soils using artificial intelligence“. In Advanced Topics in Mechanics of Materials, Structures and Construction. Materials Research Forum LLC, 2023. http://dx.doi.org/10.21741/9781644902592-66.
Der volle Inhalt der QuelleKarlina, Olga K., Galina A. Varlakova, Sergei A. Dmitriev, Michael I. Ojovan, Valery V. Poluektov und Vladislav A. Petrov. „Thermochemical Conditioning of Radioactive Waste: Structure and Properties of Final Processed Product“. In ASME 2003 9th International Conference on Radioactive Waste Management and Environmental Remediation. ASMEDC, 2003. http://dx.doi.org/10.1115/icem2003-4560.
Der volle Inhalt der QuelleYudin, Alexey, Mohamed ElSebaee, Vladimir Stashevskiy, Omar Almethen, Ahmed AlJanahi, Sayed Abdelrady, Saeed Darwish und Hassan AlMannai. „Fracturing Height Growth Restriction Technique Successfully Extended into Horizontal Wells in Ostracod Formation“. In SPE International Hydraulic Fracturing Technology Conference & Exhibition. SPE, 2022. http://dx.doi.org/10.2118/205239-ms.
Der volle Inhalt der QuelleBates, Ethan A., Jacopo Buongiorno, Emilio Baglietto und Michael J. Driscoll. „Mechanical Stresses Affecting Deep Borehole Disposal of High Level Nuclear Waste“. In 2014 22nd International Conference on Nuclear Engineering. American Society of Mechanical Engineers, 2014. http://dx.doi.org/10.1115/icone22-31259.
Der volle Inhalt der QuelleOfei, Titus Ntow, Itung Cheng, Bjørnar Lund, Arild Saasen und Sigbjørn Sangesland. „On the Stability of Oil-Based Drilling Fluid: Effect of Oil-Water Ratio“. In ASME 2020 39th International Conference on Ocean, Offshore and Arctic Engineering. American Society of Mechanical Engineers, 2020. http://dx.doi.org/10.1115/omae2020-19071.
Der volle Inhalt der QuelleFay, Mathew, Augusto Correnti, Marisol Najera, Gabriel Formento und Nicole Storni. „Geochemical Characterization of Vaca Muerta Produced Water and Shallow Aquifers in the Neuquén Basin“. In SPE Annual Technical Conference and Exhibition. SPE, 2022. http://dx.doi.org/10.2118/210094-ms.
Der volle Inhalt der QuelleA., FEDORUK, IVANOV G. und FEDORUK O. „CERAMICS OF THE TRANSITIONAL TYPE FROM THE DEVELOPED BRONZE TO THE LATE BRONZE OF THE KALINOVKA-II SETTLEMENT (EASTERN KULUNDA)“. In MODERN SOLUTIONS TO CURRENT PROBLEMS OF EURASIAN ARCHEOLOGY. Altai State Univercity, 2023. http://dx.doi.org/10.14258/msapea.2023.3.27.
Der volle Inhalt der QuelleBerichte der Organisationen zum Thema "Clay-Based mixtures"
Shmulevich, Itzhak, Shrini Upadhyaya, Dror Rubinstein, Zvika Asaf und Jeffrey P. Mitchell. Developing Simulation Tool for the Prediction of Cohesive Behavior Agricultural Materials Using Discrete Element Modeling. United States Department of Agriculture, Oktober 2011. http://dx.doi.org/10.32747/2011.7697108.bard.
Der volle Inhalt der Quelle