Auswahl der wissenschaftlichen Literatur zum Thema „Characterization of sensors“
Geben Sie eine Quelle nach APA, MLA, Chicago, Harvard und anderen Zitierweisen an
Inhaltsverzeichnis
Machen Sie sich mit den Listen der aktuellen Artikel, Bücher, Dissertationen, Berichten und anderer wissenschaftlichen Quellen zum Thema "Characterization of sensors" bekannt.
Neben jedem Werk im Literaturverzeichnis ist die Option "Zur Bibliographie hinzufügen" verfügbar. Nutzen Sie sie, wird Ihre bibliographische Angabe des gewählten Werkes nach der nötigen Zitierweise (APA, MLA, Harvard, Chicago, Vancouver usw.) automatisch gestaltet.
Sie können auch den vollen Text der wissenschaftlichen Publikation im PDF-Format herunterladen und eine Online-Annotation der Arbeit lesen, wenn die relevanten Parameter in den Metadaten verfügbar sind.
Zeitschriftenartikel zum Thema "Characterization of sensors"
Giurgiutiu, Victor, und Andrei N. Zagrai. „Characterization of Piezoelectric Wafer Active Sensors“. Journal of Intelligent Material Systems and Structures 11, Nr. 12 (Dezember 2000): 959–76. http://dx.doi.org/10.1106/a1hu-23jd-m5au-engw.
Der volle Inhalt der QuellePetrović, Davor, und Željko Barač. „Different Sensor Systems for the Application of Variable Rate Technology in Permanent Crops“. Tehnički glasnik 12, Nr. 3 (25.09.2018): 188–95. http://dx.doi.org/10.31803/tg-20180213125928.
Der volle Inhalt der QuelleAijazi, A. K., L. Malaterre, L. Trassoudaine und P. Checchin. „SYSTEMATIC EVALUATION AND CHARACTERIZATION OF 3D SOLID STATE LIDAR SENSORS FOR AUTONOMOUS GROUND VEHICLES“. ISPRS - International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences XLIII-B1-2020 (06.08.2020): 199–203. http://dx.doi.org/10.5194/isprs-archives-xliii-b1-2020-199-2020.
Der volle Inhalt der QuelleYulianti, Ian, Ngurah Made Darma Putra, Fianti Fianti, Abu Sahmah Mohd Supa’at, Helvi Rumiana, Siti Maimanah und Kukuh Eka Kurniansyah. „Characterization of Temperature Response of Asymmetric Tapered-Plastic Optical Fiber-Mach Zehnder Interferometer“. Jurnal Penelitian Fisika dan Aplikasinya (JPFA) 10, Nr. 1 (14.07.2020): 34. http://dx.doi.org/10.26740/jpfa.v10n1.p34-43.
Der volle Inhalt der QuelleGrima, Adrian, Mario Di Castro, Alessandro Masi und Nicholas Sammut. „Frequency response characterization of ironless inductive position sensors with long cables“. MATEC Web of Conferences 208 (2018): 03007. http://dx.doi.org/10.1051/matecconf/201820803007.
Der volle Inhalt der QuelleNouri, Hanen, Dhivakar Rajendran, Rajarajan Ramalingame und Olfa Kanoun. „Homogeneity Characterization of Textile-Integrated Wearable Sensors based on Impedance Spectroscopy“. Sensors 22, Nr. 17 (30.08.2022): 6530. http://dx.doi.org/10.3390/s22176530.
Der volle Inhalt der QuelleVivek, A., K. Shambavi und Zachariah C. Alex. „A review: metamaterial sensors for material characterization“. Sensor Review 39, Nr. 3 (20.05.2019): 417–32. http://dx.doi.org/10.1108/sr-06-2018-0152.
Der volle Inhalt der QuelleMoreno, Javier, Eduard Clotet, Dani Martínez, Marcel Tresanchez, Tomàs Pallejà und Jordi Palacín. „Experimental Characterization of the Twin-Eye Laser Mouse Sensor“. Journal of Sensors 2016 (2016): 1–8. http://dx.doi.org/10.1155/2016/4281397.
Der volle Inhalt der QuelleBanothu, Akhil Naik, Vinay Budhraja, Prabha Sundaravadivel, Reginald Fletcher und Krishna Reddy. „Design and Characterization of Printed Flexible Humidity Sensor“. ECS Transactions 113, Nr. 13 (17.05.2024): 27–34. http://dx.doi.org/10.1149/11313.0027ecst.
Der volle Inhalt der QuelleXu, Hong Yan, Xing Qiao Chen, Ling Zhan Fang und Bing Qiang Cao. „Preparation and Characterization of Cerium-Doped Tin Oxide Gas Sensors“. Advanced Materials Research 306-307 (August 2011): 1450–55. http://dx.doi.org/10.4028/www.scientific.net/amr.306-307.1450.
Der volle Inhalt der QuelleDissertationen zum Thema "Characterization of sensors"
Petitdidier, Nils. „LSST: Characterization of the CCD sensors“. Thesis, KTH, Tillämpad fysik, 2015. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-168008.
Der volle Inhalt der QuelleHughes, Höglund Joshua. „Bed-time sensors - characterization and comparison“. Thesis, Uppsala universitet, Avdelningen för datorteknik, 2018. http://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-371795.
Der volle Inhalt der QuelleBlank, Kerstin. „Molecular force sensors design, characterization and applications /“. Diss., [S.l.] : [s.n.], 2006. http://edoc.ub.uni-muenchen.de/archive/00006085.
Der volle Inhalt der QuelleLOMBARDO, LUCA. „Development and characterization of sensors for human health“. Doctoral thesis, Politecnico di Torino, 2019. http://hdl.handle.net/11583/2774813.
Der volle Inhalt der QuelleAnnanouch, Fatima Ezahra. „Design, Optimization and Characterization of Metal Oxide Nanowire Sensors“. Doctoral thesis, Universitat Rovira i Virgili, 2015. http://hdl.handle.net/10803/352214.
Der volle Inhalt der QuelleEn esta tesis, he estudiado y desarrollado un método de deposición química en fase vapor asistido por aerosol (AACVD), para el crecimiento directo de nanoagujas de óxido de tungsteno funcionalizadas o intrínsecas. Los depósitos se han realizado sobre distintos sustratos transdcutores para su aplicación a la detección de gases. Esta técnica ofrece la posibilidad de co-depositar los metales con los óxidos metálicos empleando una sola etapa de deposición. La síntesis del material nanoestructurado, la fabricación del dispositivo, la caracterización de los materiales y la detección de gases han sido investigadas. El método AACVD se empleó para el crecimiento y la integración directa de la película de sensible sobre sustratos cerámicos (alúmina), MEMS (micro hotplates) y poliméricos flexibles, lo que demuestra su compatibilidad e idoneidad para el crecimiento de nanoestructuras de óxido metálicos sobre una amplia gama de sustratos transductores. Además, el método AACVD se ha implementado también en un reactor de pared fría para crecer las nanoestructuras de WO3, empleando el calentamiento localizado que permiten conseguir las microresistencias calefactoras integradas en algunos de los transductores empleados. Todas las películas sintetizadas en esta tesis doctoral se componían de nanoagujas de WO3 puro o de WO3 funcionalizado con nanopartículas de oro (Au), platino (Pt), óxido de cobre (Cu2O) o paladio (Pd). Se utilizaron diversas tecnologías de análisis para caracterizar la morfología, la estructura y la composición de las películas producidas. Los resultados mostraron que nuestro método es eficaz para el crecimiento de nanoagujas cristalinas de WO3 decoradas con nanopartículas de metales / óxidos metálicos, a temperaturas moderadas (es decir, 380 ° C), con eficacia en sus costes y con tiempos de fabricación cortos, directamente sobre el elemento trasndcutor con vistas a obtener sensores de gases. Los estudios de detección de gases han mostrado que este nanomaterial híbrido tiene una excelente sensibilidad y selectividad en comparación con muestras de WO3 puro. Además, los nanocompuestos Cu2O / WO3 y Pd / WO3 han demostrado poseer una excelente sensibilidad y selectividad hacia los gases H2S y H2, respectivamente.
In this thesis, I have studied and developed aerosol assisted chemical vapour deposition (AACVD) methods for the direct growth of non-functionalized and functionalized tungsten oxide nanoneedles, onto different transducer substrates, for gas sensing applications. This technique gives the possibility to co-deposit metals with metal oxides nanostructures within a single step deposition. The nanostructured material synthesis, device fabrication, material characterization and gas sensing performance have been investigated. AACVD method was employed for the direct growth and integration of the sensing film onto ceramic (alumina), MEMS (silicon micro hotplates) and flexible polymeric substrates, demonstrating its compatibility and suitability for growing metal oxide nanostructures onto a wide spectrum of sensor substrates. Furthermore, AACVD based on the localized heating of substrates employing their embedded resistive microheaters has been also performed and developed for the growth of WO3 nanostructures, using a cold wall reactor. All the synthesized films used in this doctoral thesis were composed of pure WO3 nanoneedles or WO3 nanoneedles functionalized with either gold (Au), platinum (Pt), cuprous oxide (Cu2O) or palladium (Pd) nanoparticles. Various analytical techniques were used to characterize the morphology, the structure and the composition of the produced films. The results showed that our method is effective for growing single crystalline WO3 nanoneedles decorated with metals/metal oxides nanoparticles at moderate temperatures (i.e., 380 °C), with cost effectiveness and short fabrication times, directly onto transducers in view of obtaining gas sensors. The gas sensing studies performed showed that these hybrid nanomaterials have excellent sensitivity and selectivity compared to pristine WO3 samples. Cu2O/WO3 and Pd/WO3 nanocomposites have shown excellent sensitivity and selectivity toward H2S and H2 gases respectively.
Griffiths, David John. „Development of Ionic Polymer Metallic Composites as sensors“. Thesis, Virginia Tech, 2008. http://hdl.handle.net/10919/35676.
Der volle Inhalt der QuelleMaster of Science
Tsolov, Peter. „Design, fabrication and characterization of thick-film gas sensors“. Doctoral thesis, Universitat Rovira i Virgili, 2004. http://hdl.handle.net/10803/8450.
Der volle Inhalt der QuelleTítulo: Diseño, fabricación y caracterización de sensores de capa gruesa
Doctorando: Peter Tsolov Ivanov
Director: Xavier Correig Blanchar
Los sensores de gases de estado sólido han demostrado ser muy prometedores para
supervisar la emisión de los agentes contaminadores en el aire, porque son una opción
de bajo coste para la construcción de analizadores de gases. Algunos problemas se
relacionados con este tipo de dispositivos, especialmente su baja selectividad y el alto
consumo de energía, siguen sin resolver. El objetivo de esta tesis doctoral es el
desarrollo de nuevos sensores y matrices de sensores con mejorada selectividad y
reducido consumo de energía.
La metodología usada en esta tesis consiste en fabricar matrices de sensores hechas de
sensores con distintas selectividades. Como la respuesta del sensor es diferente en
distintas temperaturas de trabajo y como los distintos dopantes o los filtros catalíticos
aceleran o reducen la respuesta del sensor, los diferentes sensores dan diferentes
reacciones. Combinando estas reacciones y con la ayuda de técnicas del reconocimiento
de patrones, se pueden crear grupos de sensores capaces de distinguir entre distintos
agentes contaminantes.
La tesis comienza repasando los métodos usados para la fabricación de los sensores de
gases y discutiendo los problemas relacionados con la baja selectividad de los óxidos
metálicos. Se especifican también los diferentes métodos para aumentar la selectividad.
Se introduce y se describe detalladamente la técnica de screen-printing. Los
experimentos se realizaron con cuatro tipos de substratos de sensores (cerámica, silicio,
microhotplate y silicon-on-insulator) y con más de 15 capas activas basadas en dióxido
de estaño y trióxido de tungsteno (puras y dopadas con oro, platino, plata, titanio y
paladio). Una amplia variedad de compuestos volátiles (amoníaco, etanol, acetona y
benceno), de gases (monóxido de carbono, dióxido de nitrógeno, metano y sulfuro de
PhD thesis of Peter Tsolov Ivanov Resumen de la tesis doctoral
hidrógeno) y de algunas mezclas binarias ha sido medida. Los resultados obtenidos por
los análisis cuantitativos y cualitativos de los gases estudiados con una matriz de
sensores basada en cuatro sensores simples nos han llevado a descubrir el óptimo
sensor/matriz para los distintos gases/mezclas binarias.
Los resultados demostraron que, con la ayuda de redes neuronales Fuzzy ARTMAP, es
posible identificar y cuantificar simultáneamente los gases analizados usando solamente
una matriz de microhotplates (cuatro sensores) con la misma capa activa. Los sensores
de SnO2 y de WO3 dopados demostraron diversa respuesta a los agentes contaminantes
probados. Componiendo cuidadosamente la matriz de sensores y definiendo bien la
temperatura de trabajo podemos discriminar, con un alto grado de éxito, los diversos
gases probados sin la necesidad de técnicas de reconocimiento de patrones.
La conclusión principal que se puede sacar de esta tesis es que las matrices de sensores,
junto con las técnicas de reconocimiento de patrones, se pueden utilizar para aumentar
perceptiblemente la selectividad de los sensores de óxidos metálicos. La simplicidad de
los métodos propuestos permite su uso en el desarrollo de analizadores de gases más
baratos y narices electrónicas portátiles.
A partir de la investigación realizada durante esta tesis doctoral se han elaborado 15
artículos publicados en revistas internacionales, 10 comunicaciones en las conferencias
internacionales y 3 comunicaciones en conferencias españolas.
PhD thesis of Peter Tsolov Ivanov Resume of the doctoral thesis
OF THE DOCTORAL THESIS
Title: Design, Fabrication and Characterization of Thick-Film Gas Sensors
Doctorate: Peter Tsolov Ivanov
Director: Xavier Correig Blanchar
Solid-state gas sensors have proved to be very promising for monitoring the emission of
air pollutants because they are a low cost option for constructing gas analysers. Some
problems associated to this approach, especially their deficient selectivity and high
power consumption, remain unsolved. The aim of this doctoral thesis is to develop new
sensors and sensor matrices that can improve the selectivity of metal oxide gas sensors
and decrease their power consumption.
The methodology used here consists of creating sensor matrices made from sensors with
different selectivities. As the sensor response is different at different working
temperatures and as the different dopants or catalytic filters accelerate or reduce the
sensor response, the different sensors give different reactions. If these reactions are
combined, sensor groups capable of discriminating between different pollutants can be
obtained with the help of pattern recognition techniques.
The thesis begins by reviewing the methods used for fabricating gas sensors and
discussing the problems caused by the poor selectivity of metal oxide gas sensors and
the methods for increasing their selectivity. Then, the screen-printing technique is
introduced and described. The experiments were performed with four different types of
gas sensor substrates (ceramic, silicon, microhotplate and silicon-on-insulator) and more
than 15 active layers (undoped and doped with gold, platinum, silver, titanium and
paladium tin dioxide and tungsten trioxide sensitive layers). A wide variety of volatile
compounds (ammonia, ethanol, acetone and benzene), gases (carbon monoxide,
nitrogen dioxide, methane and hydrogen sulphide) and some binary mixtures were
measured. The results obtained from quantitative and qualitative gas analysis using the
PhD thesis of Peter Tsolov Ivanov Resume of the doctoral thesis
sensor response from a simple 4 sensor based matrix led to the optimal sensor/sensor
matrix for gas/binary mixtures.
The results showed that, with the help of fuzzy ARTMAP neural networks, it is possible
to identify and simultaneously quantify the gases analysed by using only one MHP-chip
(four sensors) with the same active layer. The doped SnO2 and WO3 sensors showed
different response to the tested pollutants. Composing carefully the sensor matrix and
defining well the working temperature we were able to discriminate, with a high success
rate, between the different test gases with no need for pattern recognition techniques.
The main conclusion that can be drawn from this thesis is that sensor matrices can be
used, coupled to dynamic pattern recognition techniques, to significantly increase the
selectivity of metal oxide sensors. The simplicity of the methods implemented makes
them suitable for developing low-cost gas analysers and hand-held e-noses.
The research carried out during this doctoral thesis resulted in 15 articles being
published in international journals, 10 communications at international conferences and
3 communications at a Spanish national conference.
PhD thesis of Peter Tsolov Ivanov Resumen de la tesis doctoral
Unander, Tomas. „Characterization of Low Cost Printed Sensors for Smart Packaging“. Licentiate thesis, Mid Sweden University, Department of Information Technology and Media, 2008. http://urn.kb.se/resolve?urn=urn:nbn:se:miun:diva-7049.
Der volle Inhalt der QuelleCurrently there are very significant interests in printed electronics in the world. The possibility to produce electronics in a roll to roll printing process will considerably reduce the cost of the electronic devices. However, these new devices will most probably not replace the traditional silicon based electronics, but will be a complement in low cost applications such as in intelligent packages and other printable media. One interesting area is printable low cost sensors that add value to packages. In this thesis a study of the performance of low cost sensors is presented. The sensors were fabricated using commercial printing processes used in the graphical printing business. The sensors were characterized and evaluated for the intended application. The evaluated sensors were moisture sensing sensor solutions and touch sensitive sensor solutions.
A printable touch sensitive sensor solution is presented where the sensor is incorporated into a high quality image such as in point of sales displays. The sensor solution showed good touch sensitivity at a variety of humidity levels. Four printed moisture sensor concepts are presented and characterized. Firstly, a moisture sensor that shows good correlation to the moisture content of cellulose based substrates. Secondly, a sensor that measures the relative humidity in the air, the sensor has a measuring accuracy of 0.22% at high relative humidity levels. Thirdly, a moisture sensor that utilizes unsintered silver nano-particles to measure the relative humidity in the air, the sensor has a linear response at very low relative humidity levels. And fourth, an action activated energy cell that provides power when activated by moisture. A concept of remote moisture sensing that utilizes ordinary low cost RFID tags has also been presented and characterized. The remote sensor solution works both with passive and semi-passive RFID systems. The study shows that it is possible to manufacture low cost sensors in commercial printing processes.
Det är för närvarande ett stort intresse för tryckt elektronik. Att kunna tillverka elektroniska komponenter i en rulle till rulle process möjliggör en reducering av tillverkningskostnaden. Dessa nya komponenter kommer sannolikt inte konkurrera ut den traditionella kiselbaserade elektroniken utan kommer att kunna komplimentera kiselelektronik i segment där kostnaden är väldigt viktig som i intelligenta förpackningar och andra tryckta medier. Ett intressant område är tryckta sensorer som kan addera värde till förpackningar. I denna avhandling presenteras en studie kring tryckta sensorer som kan tillverkas till låg kostnad. Sensorerna är tillverkade i kommersiella grafiska tryckpressar. Sensorerna karakteriseras och utvärderas för de applikationer som de är tänkta för. I denna avhandling har fuktsensorer och beröringskänsliga sensorer undersökts.
Det presenteras en tryckt beröringskänslig sensor som integreras i ett högkvalitativt grafiskt tryck. Denna sensor är tänkt att användas i reklamskyltar för att skapa interaktivitet. Sensorn har en bra känslighet vid varierande fukthalter. Även fyra fuktsensorer presenteras och utvärderas. Den första sensorn mäter fukthalten i cellulosabaserade substrat och visar en bra korrelation till fukthalten i substratet. Den andra sensorn mäter den relativa fukten i luften, denna sensor har en mätnoggrannhet på 0.22% för höga fukthalter. Den tredje sensorn använder partiklar i nanostorlek för att mäta fukthalten i luften. Denna sensor fungerar väldigt bra vid låga fukthalter. Den fjärde sensorn är en energicell som producerar el när den blir fuktig. Även en fuktsensor som kan läsas av på håll utvärderas. Detta sensorkoncept är baserad på vanliga RFID taggar och kan användas med både passiva och semi-passiva taggar. Denna avhandling visar att det är möjligt att tillverka sensorer till en låg kostnad in en traditionell grafisk tryckpress.
Wang, Xiaozhen. „Characterization of Fiber Tapers for Fiber Devices and Sensors“. Thèse, Université d'Ottawa / University of Ottawa, 2012. http://hdl.handle.net/10393/23330.
Der volle Inhalt der QuelleLee, Hsiao-Yen. „Synthesis and characterization of nano-sructured materials for sensors“. Thesis, University of Leeds, 2009. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.505052.
Der volle Inhalt der QuelleBücher zum Thema "Characterization of sensors"
O, Claus Richard, und United States. National Aeronautics and Space Administration., Hrsg. Optical fiber sensors for materials and structures characterization. [Washington, DC: National Aeronautics and Space Administration, 1991.
Den vollen Inhalt der Quelle findenPopović, R. S. Hall effect devices: Magnetic sensors and characterization of semiconductors. Bristol, England: A. Hilger, 1991.
Den vollen Inhalt der Quelle findenShams, Qamar A. Characterization of polymer-coated MEMS humidity sensors for flight applications. Hampton, VA: National Aeronautics and Space Administration, Langley Research Center, 2003.
Den vollen Inhalt der Quelle findenMichael, Thompson. Surface-launched acoustic wave sensors: Chemical sensing and thin-film characterization. New York: Wiley, 1997.
Den vollen Inhalt der Quelle finden1926-, Tsuchiya Kiyoshi, und World Space Congress (2nd : 2002 : Houston, Texas), Hrsg. Calibration, characterization of satellite sensors, physical parameters derived from satellite data. Kidlington, Oxford: Published for the Committee on Space Research [by] Pergamon, 2003.
Den vollen Inhalt der Quelle findenFraga, Mariana Amorim. Amorphous silicon carbide thin films: Deposition, characterization, etching, and piezoresistive sensors applications. Hauppauge, N.Y: Nova Science Publishers, 2011.
Den vollen Inhalt der Quelle findenL, Barker John, und United States. National Aeronautics and Space Administration. Scientific and Technical Information Branch, Hrsg. Landsat-4 science characterization early results. [Washington, D.C.]: National Aeronautics and Space Administration, Scientific and Technical Information Branch, 1985.
Den vollen Inhalt der Quelle findenN, Kumta Prashant, und American Ceramic Society Meeting, Hrsg. Processing and characterization of electrochemical materials and devices. Westerville, Ohio: American Ceramic Society, 2000.
Den vollen Inhalt der Quelle findenShimoda, Haruhisa, Xiaoxiong Xiong und Choen Kim. Earth observing missions and sensors: Development, implementation, and characterization : 13-14 October 2010, Incheon, Korea, Republic of. Herausgegeben von SPIE (Society) und Han'guk Haeyang Yŏn'guwŏn. Bellingham, Wash: SPIE, 2010.
Den vollen Inhalt der Quelle findenShimoda, Haruhisa. Earth observing missions and sensors: Development, implementation, and characterization II : 30 October-1 November 2012, Kyoto, Japan. Herausgegeben von SPIE (Society). Bellingham, Washington: SPIE, 2012.
Den vollen Inhalt der Quelle findenBuchteile zum Thema "Characterization of sensors"
Gupta, Ankur, und Gulshan Verma. „Characterization of Nanomaterials“. In Nanostructured Gas Sensors, 25–63. New York: Jenny Stanford Publishing, 2022. http://dx.doi.org/10.1201/9781003331230-2.
Der volle Inhalt der QuelleFerrari, Paolo, Luca Lamagna und Francesco Daniele Revello. „Thin Films Characterization and Metrology“. In Silicon Sensors and Actuators, 105–32. Cham: Springer International Publishing, 2022. http://dx.doi.org/10.1007/978-3-030-80135-9_4.
Der volle Inhalt der QuelleFatimah, Is, Gani Purwiandono, Ganjar Fadillah und Wiyogo Prio Wicaksono. „Functional Nanomaterials for Characterization Techniques“. In Functional Nanomaterials for Sensors, 39–59. Boca Raton: CRC Press, 2023. http://dx.doi.org/10.1201/9781003263852-3.
Der volle Inhalt der QuelleRupitsch, Stefan Johann. „Characterization of Sensor and Actuator Materials“. In Piezoelectric Sensors and Actuators, 127–93. Berlin, Heidelberg: Springer Berlin Heidelberg, 2018. http://dx.doi.org/10.1007/978-3-662-57534-5_5.
Der volle Inhalt der QuelleKim, Jung-Keun, Chang-Soo Lee und Eunji Lee. „Smart Vesicles: Synthesis, Characterization and Applications“. In Smart Membranes and Sensors, 53–103. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2014. http://dx.doi.org/10.1002/9781119028642.ch3.
Der volle Inhalt der QuelleYahyazadeh, Arash, und Alivia Mukherjee. „Functionalization and Characterization of Carbon Nanotubes“. In Carbon Nanotube-Based Sensors, 44–67. Boca Raton: CRC Press, 2024. http://dx.doi.org/10.1201/9781003376071-3.
Der volle Inhalt der QuelleCeccone, Giacomo, D. Gilliland und Wilhelm Kulisch. „Surface Analytical Characterization of Biosensor Materials“. In Nanotechnological Basis for Advanced Sensors, 81–102. Dordrecht: Springer Netherlands, 2011. http://dx.doi.org/10.1007/978-94-007-0903-4_10.
Der volle Inhalt der QuelleRupitsch, Stefan Johann. „Characterization of Sound Fields Generated by Ultrasonic Transducers“. In Piezoelectric Sensors and Actuators, 341–406. Berlin, Heidelberg: Springer Berlin Heidelberg, 2018. http://dx.doi.org/10.1007/978-3-662-57534-5_8.
Der volle Inhalt der QuelleAyyanar, C. Balaji, K. Marimuthu und B. Gayathri. „Characterization of Syzygium cumini Particulates-Filled Epoxy Composites“. In Intelligent Technologies for Sensors, 39–44. New York: Apple Academic Press, 2023. http://dx.doi.org/10.1201/9781003314851-5.
Der volle Inhalt der QuellePang, Lingyan, Xiao Jia, Jiaojiao Gao und Hui Liu. „Self-Assembly and Fabrication of Biomaterials onto Transducers and Their Characterization“. In Biomaterials-Based Sensors, 127–75. Singapore: Springer Nature Singapore, 2023. http://dx.doi.org/10.1007/978-981-19-8501-0_5.
Der volle Inhalt der QuelleKonferenzberichte zum Thema "Characterization of sensors"
Phillips, David M., Keith A. Slinker, Cody W. Ray, Benjamin J. Hagen, Jeffery W. Baur, Benjamin T. Dickinson und Gregory W. Reich. „Artificial Hair Sensors: Electro-Mechanical Characterization“. In ASME 2014 Conference on Smart Materials, Adaptive Structures and Intelligent Systems. American Society of Mechanical Engineers, 2014. http://dx.doi.org/10.1115/smasis2014-7707.
Der volle Inhalt der QuelleSheiretov, Yanko, Leslie Evans, Darrell Schlicker, Vladimir Zilberstein, Neil Goldfine und Ruth Sikorski. „TBC Characterization Using Magnetic and Electric Field Sensors“. In ASME Turbo Expo 2007: Power for Land, Sea, and Air. ASMEDC, 2007. http://dx.doi.org/10.1115/gt2007-27526.
Der volle Inhalt der QuelleCarvalho, V., F. Soares, M. Belsley und R. M. Vasconcelos. „Automatic yarn characterization system“. In 2008 IEEE Sensors. IEEE, 2008. http://dx.doi.org/10.1109/icsens.2008.4716557.
Der volle Inhalt der QuelleSheridan, Eoin, Mohammad Amanzadeh, Saiied M. Aminossadati, Mehmet S. Kizil und Warwick P. Bowen. „Fibre Microfabrication and Characterization for Gas Sensing“. In Optical Sensors. Washington, D.C.: OSA, 2012. http://dx.doi.org/10.1364/sensors.2012.stu2f.3.
Der volle Inhalt der QuellePeiner, Erwin, und Lutz Doering. „Characterization of diesel injectors using piezoresistive sensors“. In 2010 Ninth IEEE Sensors Conference (SENSORS 2010). IEEE, 2010. http://dx.doi.org/10.1109/icsens.2010.5690341.
Der volle Inhalt der QuelleGao, Zhaolin, Matthew J. Danley, Jack T. Kloster, Victor K. Lai und Ping Zhao. „Characterization of Nanoporous Polyvinylidene Fluoride (PVDF) Sensors Under Tensile Loading“. In ASME 2021 Conference on Smart Materials, Adaptive Structures and Intelligent Systems. American Society of Mechanical Engineers, 2021. http://dx.doi.org/10.1115/smasis2021-67462.
Der volle Inhalt der QuelleFerrara, Giovanni, Lorenzo Ferrari und Gabriele Sonni. „Experimental Characterization of a Remoting System for Dynamic Pressure Sensors“. In ASME Turbo Expo 2005: Power for Land, Sea, and Air. ASMEDC, 2005. http://dx.doi.org/10.1115/gt2005-68733.
Der volle Inhalt der QuelleNüssler, Dirk, Christian Krebs und Ralf Brauns. „Detection of non-metallic impurities and defects through radar measurements“. In OCM 2013 - Optical Characterization of Materials. KIT Scientific Publishing, 2013. http://dx.doi.org/10.58895/ksp/1000032143-14.
Der volle Inhalt der QuelleLefebvre, Paul, Andre Vincelette, Peter Ficocelli, Sebastien Allard und Sylvie Carbonneau. „Reliability Characterization of Fiber Bragg Grating“. In Optical Fiber Sensors. Washington, D.C.: OSA, 2006. http://dx.doi.org/10.1364/ofs.2006.md6.
Der volle Inhalt der QuelleRupitsch, Stefan J. „Simulation-based characterization of piezoceramic materials“. In 2016 IEEE SENSORS. IEEE, 2016. http://dx.doi.org/10.1109/icsens.2016.7808757.
Der volle Inhalt der QuelleBerichte der Organisationen zum Thema "Characterization of sensors"
Thundat, Thomas G., Zhiyu Hu, Gilbert M. Brown und Baohua Gu. Microcantilever Sensors for In-Situ Subsurface Characterization. Office of Scientific and Technical Information (OSTI), Juni 2006. http://dx.doi.org/10.2172/895615.
Der volle Inhalt der QuelleFonseca, Michael A., Jennifer M. English, Martin Von Arx und Mark G. Allen. High Temperature Characterization of Ceramic Pressure Sensors. Fort Belvoir, VA: Defense Technical Information Center, Januar 2001. http://dx.doi.org/10.21236/ada463252.
Der volle Inhalt der QuelleHolman, Rob. Robust Littoral Characterization using Electro-Optical Sensors. Fort Belvoir, VA: Defense Technical Information Center, September 2011. http://dx.doi.org/10.21236/ada557166.
Der volle Inhalt der QuelleIsrael, Scott, und Zoltan Gecse. Characterization of Silicon Sensors for HGCal in CMS. Office of Scientific and Technical Information (OSTI), Juli 2019. http://dx.doi.org/10.2172/1614730.
Der volle Inhalt der QuelleCampanella, Michael, Maral Alyari und Ron Lipton. Characterization of CMS High Granularity Calorimeter Silicon Sensors. Office of Scientific and Technical Information (OSTI), August 2019. http://dx.doi.org/10.2172/1623362.
Der volle Inhalt der QuelleFink, Bruce K., Mahendra B. Dorairaj, John W. Gillespie und Jr. Vinyl-Ester (VE) Cure Characterization Via Direct Current Sensors. Fort Belvoir, VA: Defense Technical Information Center, März 2001. http://dx.doi.org/10.21236/ada392622.
Der volle Inhalt der QuelleClausen, Jay, Richard Hark, Russ Harmon, John Plumer, Samuel Beal und Meghan Bishop. A comparison of handheld field chemical sensors for soil characterization with a focus on LIBS. Engineer Research and Development Center (U.S.), Februar 2022. http://dx.doi.org/10.21079/11681/43282.
Der volle Inhalt der QuelleGanguly, Suman. Experimental Demonstration of Underground Structure Characterization Using Sensitive Magnetic Sensors. Fort Belvoir, VA: Defense Technical Information Center, Januar 1999. http://dx.doi.org/10.21236/ada399347.
Der volle Inhalt der QuelleGanguly, Suman. Experimental Demonstration of Underground Structure Characterization Using Sensitive Magnetic Sensors. Fort Belvoir, VA: Defense Technical Information Center, November 2000. http://dx.doi.org/10.21236/ada406535.
Der volle Inhalt der QuelleNguyen, Q. H. Vendors search for viscosity sensors for in situ tank waste characterization. Office of Scientific and Technical Information (OSTI), Oktober 1994. http://dx.doi.org/10.2172/10192394.
Der volle Inhalt der Quelle