Dissertationen: „Building and planning’s building regulations“

1

Jensen, Therese, und Philip Söderman. „The impact of building regulations on the price of a property : A study on the construction and real estate industry's views on building regulations“. Thesis, KTH, Byggteknik och design, 2021. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-302531.

Der volle Inhalt der Quelle

Annotation:

Sweden is currently experiencing major population growth, focused predominantly in and around its major cities. This has created an ongoing challenge for municipalities to ensure housing supply meets demand, in turn increasing the required rate of construction. Furthermore, new property prices are increasing which has led to lower and middle-income earners being pushed out of the market. The thesis examines the relationship between the sale price and unit construction price of new condominiums, and to what degree Swedish building regulations influence construction costs. The design of both new and re-developed housing is influenced by various Swedish laws, regulations and guidelines, where the Planning and Building Act and the National Board of Housing, Building and Planning's Building Rules govern, which are all recognized nationally. According to the Planning and Building Act, it is not permitted for municipalities to set their own requirements. However, the results of the study show that developers experience different interpretations of these rules and regulations when working within different municipalities, or even between different case officers within the same municipality. This then results in projects being difficult to plan, resulting in higher costs. Sweden has, when compared to other European countries, high production costs, which according to the literature review is considered to have a direct connection to construction requirements and market competition. Additionally, the results show that the requirements make it difficult to produce and implement standard designs and construction methods. This has led to the construction industry finding it difficult to develop in regards to construction technology and from a cost perspective. Lack of predictability has driven costs up when it comes to accessibility, housing design and fire protection. Finally, the study shows that lower production costs can lead to greater competition by making it easier for more developers to establish themselves in the market. This would result in more homes being built at lower production costs, which motivates developers to invest in new projects. As the results indicate that production costs do not affect final prices – but rather the willingness of developers to invest – a greater supply of housing would push down final prices.
Befolkningen ökar ständigt i Sverige och framför allt i storstäderna. En pågående utmaning för landets kommuner är därför att se till att utbudet av bostäder möter efterfrågan och att det rådande underskottet på bostäder hämtas upp. För att göra det krävs en hög och jämn byggtakt. Vidare har de höga slutpriserna som i dagsläget föreligger på bostadsrätter, försatt låginkomsttagare utanför bostadsmarknaden och även skapat problem för medelinkomsttagare att förvärva en bostad. I detta examensarbete undersöks relationen mellan slutpriser på bostadsrätter och produktionskostnaderna för flerbostadshus samt om de svenska byggreglerna påverkar produktionskostnaderna. I förlängningen undersöker examensarbetet huruvida kraven i de svenska byggreglerna genererar merkostnader som i sin tur leder till dyrare priser på bostadsrätter. Hur ny- och ombyggnation ska utformas regleras i ett antal lagar, föreskrifter och allmänna råd, där Plan- och bygglagen och Boverkets Byggregler styr. Reglerna ska i sin tur verka nationellt och det är därmed enligt Plan- och bygglagen inte tillåtet för kommunerna att ställa egna särkrav. Dock visar resultatet av examensarbetet att byggbolagen upplever att det finns en viss tolkningsfrihet och lokala formuleringar av de rådande kraven. De menar att detta leder till att processen skiljer sig åt beroende på i vilken kommun nyproduktionen projekterats för samt vilken bygglovshandläggare som hanterar ärendet. Vidare resulterar detta i projekt som är svåra att planera och i vissa fall ger högre kostnader. Sverige har jämfört med övriga länder i Europa höga produktionskostnader vilket enligt litteraturöversikten anses ha en direkt koppling till bland annat kravställningarna och konkurrensen på marknaden. Dessutom presenterar resultatet att kravställningarna försvårar produktionen samt implementeringen av standardprodukter och innovationer. Detta leder till att byggbranschen generellt sett får det svårt att utvecklas industriellt, byggtekniskt och ur ett kostnadsperspektiv. Bristande förutsägbarhet är framför allt kostnadsdrivande när det handlar om tillgänglighet, bostadsutformning och brandskydd. Slutligen visar studien att lägre produktionskostnader kan leda till större konkurrens genom att det underlättar för fler byggbolag att etablera sig på marknaden. Detta skulle resultera i att fler bostäder skulle kunna byggas till lägre produktionskostnader vilket motiverar byggbolagen att investera i nya projekt. Eftersom resultatet tyder på att produktionskostnaderna inte påverkar slutpriserna utan snarare investeringsviljan hos byggbolagen, skulle också ett större utbud av bostäder pressa ned slutpriserna.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

2

Malsane, Sagar. „The application of automated rule checking to existing UK building regulations using BIM technologies“. Thesis, Northumbria University, 2015. http://nrl.northumbria.ac.uk/25328/.

Der volle Inhalt der Quelle

Annotation:

Building designs in countries like the United Kingdom are currently checked manually against a frequently changing and increasingly complex set of building regulations. It is a major task for designers and those bodies that are charged with enforcing building regulations. As a result, there can often be ambiguity, inconsistency in assessments and delays in the overall construction process. This scenario indicates the need for automated building regulation compliance checking, which is an easier and valid option. As part of this, a critical review is carried out of the building code compliance checking related efforts undertaken in different countries, including Australia, Singapore, Australia, Norway and USA. Furthermore, it is determined that the use of Building Information Models (BIM) and the Industry Foundation Class (IFC) standard is imperative for automated compliance checking in England and Wales. Most of the initiatives mentioned above focuses on creating object based rules and mapping the entities encapsulated within them to the international building model schema. The schema is designed to support the needs of an international user and takes little consideration of national semantics (e.g. UK practice and culture). Hence, the research focuses on creating UK building regulation specific data model schema. The analysis of Part-B1 through knowledge formalisation has resulted in identification of over 120 semantic entities. Using the output, a Part-B1 data model schema has been developed using EXPRESS-G language. Thus, an England and Wales building regulation specific, semantically rich, object model schema appropriate for the requirements of automated compliance checking has been developed. The data model schema development results into a document modeling method. This method was developed in a manner such that it would be applicable to model any building regulation technical document. The development of a document modeling method acts as a contribution to the knowledge as building experts, rule authors and computer programmers can use it for data modeling. The said methodology was implemented on a sample legislative document to validate its usefulness. Also through the research work, concepts such as knowledge formalisation and a clause filter system were coined and successfully utilised to overcome the issues related to unsuitability of building regulations. This work accounts as a contribution to knowledge due to its novelty. A clause filter system was developed primarily to extract appropriate information suitable for automated compliance checking. On the basis of various key findings, a detailed framework for automated compliance checking of the UK building regulations is delivered through the research work.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

3

Chan, Kai-wah Eva. „Impact of the planning and building regulations on the urban form of Hong Kong“. Hong Kong : University of Hong Kong, 1990. http://sunzi.lib.hku.hk/hkuto/record.jsp?B25796574.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

4

Shrestha, Joshi Anju. „Role of building bylaws and regulations in shaping urban forms a case of Kathmandu /“. Thesis, Click to view the E-thesis via HKUTO, 2007. http://sunzi.lib.hku.hk/HKUTO/record/B39558368.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

5

陳啓樺 und Kai-wah Eva Chan. „Impact of the planning and building regulations on the urban form of Hong Kong“. Thesis, The University of Hong Kong (Pokfulam, Hong Kong), 1990. http://hub.hku.hk/bib/B31979683.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

6

Narayana, Jayashree. „Violations of land use and building regulations : evidence from a case study in Bangalore, India /“. Thesis, This resource online, 1996. http://scholar.lib.vt.edu/theses/available/etd-06112009-063833/.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

7

Ekberg, Sanna, Leila Jafari und Kjellkvist Malin Forsberg. „Attefallskvarter : ett nytt bostadsalternativ?“ Thesis, Linnéuniversitetet, Institutionen för byggteknik (BY), 2021. http://urn.kb.se/resolve?urn=urn:nbn:se:lnu:diva-105419.

Der volle Inhalt der Quelle

Annotation:

Today, there is a housing shortage in the larger cities. This together with the long housing waiting lists makes it difficult for younger people to make a housing career and invest in a condominium. In 2014, the Swedish Parliament introduced the reform of attefallshus with the aim of reducing the housing shortage in the country and facilitating entry into the housing market. The work studies whether an attefall block can be a favorable housing concept and an example of such a housing concept is designed. The purpose of the study is to analyze which legal obstacles limit a block of attefall houses and whether the housing concept can possibly reduce the housing shortage. To answer the study's purpose and questions, interviews were conducted with experienced people in the field. The results show that very few attefallshus are currently used as dwellings. Instead they have other functions. Furthermore, the results show that the legal obstacles that limit an Attefall block are, according to the study, availability to existing one- or two residential buildings that allows additional buildings of in total 30 on the plot. The interviewees believe that the concept should change the name to single-family neighborhoods and establish detailed development plans specifically for this. The conclusions are that an attefall block will not be economically favorable, is impracticable and not a solution for housing shortages.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

8

Ekpo, Christiana. „Impact of planning and building regulations on affordable housing development by the private sector in South Africa“. Master's thesis, Faculty of Engineering and the Built Environment, 2019. http://hdl.handle.net/11427/31522.

Der volle Inhalt der Quelle

Annotation:

This study emerged from existing literary evidence that planning and building regulations affect the supply of housing and research in this area usually takes a very descriptive route that lacks an explicit theoretical framework that can guide stakeholders for better research outcomes. The rationale is based on the context that despite the many initiatives introduced by successive post-apartheid governments to improve the housing situation in South Africa, not much has been achieved to improve the enormous housing backlogs. Affordable housing, being one of the strategic mechanisms used by the government for housing delivery is laden with problems. Many factors have been attributed to the challenges among which are land use policies and building regulations, administrative bottlenecks, budgetary constraints, and so on. To effectively manage these challenges, a more proactive private sector participation has been advocated. However, this requires that proper regulatory frameworks are put in place to ensure that developers deliver housing that meets necessary safety and quality standards and still have some return on investment. Unfortunately, legislative structures which should ideally be supportive, instead, hinder development and create barriers for private developers The study thus investigates three related questions. Firstly, what are the main planning and building regulations that impact on affordable housing by the private sector? Secondly, how do the planning and building regulations affect the total cost of affordable housing development by the private sector? Thirdly, what scope exists for the change and would, relaxing these regulations, enhance the supply of affordable housing developments by the private sector in South Africa? Corresponding to these questions is the first hypothesis which states that planning and building regulations impose a significant cost on the developers and thus deter the supply by the private sector. And secondly, relaxing some of the planning and building regulations could improve affordable housing development by the private sector. The study employed a qualitative approach to gather empirical data using household surveys and semi-structured interviews from developers and consultants on five case studies together with key informants’ interviews from government officials. With the main theoretical tools of Institution Analysis and Development, this study developed a conceptual framework that determines the main planning and building regulations that impact on affordable housing supply by the private sector. And by employing insights from New Institutional Economics tools, these regulations are treated as institutions through which development rights are obtained. The study reveals; that even though planning and building regulations are affiliated with better quality housing products, they significantly affect cost, affordability and location outcomes. That no national policy tool exists to guide affordable housing implementation processes; the current city’s policy instruments are contradictory to the propagated concepts meant to enhance housing supply. The study discovers that the government has huge land parcels for different intentions, but makes it available only to a developer whose objectives align with theirs and developers lack adequate funding and incentives to motivate them. Finally, the study reveals that even when case studies are located outside the urban core of Cape Town, dwellers are happy and satisfied with the location and careless about the system’s inefficiencies and there is no direct relation between planning and building regulations and location other than the fact that regulations contribute to the bad location of developments.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

9

Bergqvist, Michaela. „Byggregler för flerbostadshus : en studie av konsekvenser och möjligheter att skapa kvalitativa bostäder genom riktad problemlösning i byggprocessen“. Thesis, Luleå tekniska universitet, Arkitektur och vatten, 2019. http://urn.kb.se/resolve?urn=urn:nbn:se:ltu:diva-73095.

Der volle Inhalt der Quelle

Annotation:

The National Board of Housing, Building and Planning have been conducting housing needs assessments since 1995 (Boverket 2015). The latest assessment was conducted in 2015 and showed that 71,000 homes will need to be built annually by 2020. To be able to contribute to building more homes, Willhem AB is carrying out a project called ”Så bygger vi för alla”. As part of the work, this thesis will examine the building rules and how they can contribute to innovation. The purpose of this thesis is to investigate which rules, laws and norms we have to keep to in Sweden regarding housing construction. The aim of the work is to investigate whether the regulatory framework can create creativity amongst the players in the market. This thesis is limited to examining which laws, government policies and eventual municipal requirements that exist in Sweden. Therefore, industry rules, such as the AMA, and contracting regulations, such as AB and ABT, will not be taken into consideration. The survey is also limited to newly built multifamily houses only. Finally, the reference objects that are studied in the thesis will be in Sweden and be limited to being either construction-technical or plan-based innovative and have been recently executed. This thesis is based on the existing regulations and theories from previous studies. The data collected for this survey will be studied from a qualitative point of view. The survey aims to investigate a number of reference objects more thoroughly and conduct interviews with key people involved in the project, which means a qualitative approach is best suited. In 1987, Sweden received a new building legislation according to Örnhall (2017), which has resulted in a transition from specification requirements to functional requirements in order to increase the liberty in housing production. However, according to Örnhall (2017 the new legislation has contributed to a wider picture of the regulatory framework. The National Board of Housing, Building and Planning is the authority that has the overall responsibility for community planning, urban development, construction and housing (Nordstrand 2008). The most important laws and government policies that the social planning sector primarily have to obey are the Planning and Building Act (PBL), the Planning and Building Regulation (PBF) as well as and the Swedish National Board of Housing, Building and Planning (BBR) (Örnhall, Swedish Construction Service 2017a). The Planning and Building Act (SFS 2010:900), PBL, regulates the planning for land and water whilst the responsibility for maintaining the regulations lies with the municipalities. The purpose of PBL is to promote social development for long-term, equal, social and environmental sustainable development for today’s society and future generations (SFS 2010: 900). When creating new homes, special consideration should be given to long term use of the home (Boverket 2016). At the interview stage, six areas emerged that were considered to be particularly problematic or interesting for the development of innovative and cheap housing. These areas were; accessibility, municipal requirements, rules, advice and interpretations, energy, innovation and development, and the ability to build for everyone. I perceived the accessibility aspect as very complex. Several interviewees argue that the accessibility requirements entail an increased cost for new builds, in one case it was even expressed that today’s availability requirements means the housing becomes less accessible to a larger group. The rules for creating an inclusive society also emerged at the interview stage while another recurring opinion is the renewal of the legislation. Several interviewees stated that they consider the regulations to be outdated and need to be updated according to today’s society. Based on this, I found The National Board of Housing, Building and Planning requirements contradictory whilst providing support for innovation, many requirements inhibits the development of housing. Therefore, extensive research should be carried out on how people in Sweden want to live today; thereafter the regulations can be updated according to today’s needs. In one way or another, all reference objects have been at the forefront when it comes to housing development. A common factor for the various reference objects is that a major problem was identified in all projects, which led to a product or solution being developed. They show that there is not one solution to the problem, but that different solutions can be found to achieve the same goal: better housing for more people.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

10

Schultz, Anthon, und Tomas Shaw. „Conversion of buildings to student housing in Stockholm – A supplement to solve the lack of student homes?“ Thesis, KTH, Fastigheter och byggande, 2014. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-147659.

Der volle Inhalt der Quelle

Annotation:

Stockholm is today one of the fastest growing regions in Europe and the demand for housing is increasing by the day. In order to achieve the target of becoming Europe's most attractive metropolitan region the city needs highly educated and skilled labour to satisfy the demand of companies today and in the future. However, the housing situation for students in the Stockholm area is at the moment very bleak. Stockholm is at least 7,000 student housings short and the quetime reaches as high as two years. Despite the lack of housing for students, we can’t see any increase in construction. This means that the students have a difficult time finding somewhere to live which results in that they choose to study elsewhere. In 2009 Boverket said that we must examine alternative solutions for resolving shortage of housing for students. In recent years a couple of projects can be seen in which existing buildings have converted its use from office or shops to student housing. An investigation of how the market views this option has been lacking. This essay aims to examine the student housing market in Stockholm in order to investigate whether conversion of existing buildings is an effective supplement when construction of new housing can’t meet the demand. We have furthermore examined a couple of restraining factors, in order to make the process more effective and finished of by drawing a couple of conclusions. The current planning process is considered to be one of the most restraining factors that leads to the fact that conversion can’t be utilized to its full extent. Lead times are said to be long and the fact that the plan is to detailed and precise makes it difficult to convert properties. With the help of more administrators and a more open plan, conversion could be used to its full extent. Building regulations are considered to be another reason why so few projects are being converted. The same rules apply when you build new buildings as when you convert. The market is looking for a change in the presentation of the current rules in order for these to be more applicable and beneficial for the market. Unpredicted expenses are always a risk when converting but with more experience the risk becomes lower. A system where you subsidize a part is not a market request since a lot of the answers suggest that this affects a market negatively in the long run. Rent control is not a factor that is considered to be restraining when converting buildings for student housing.
Stockholm är idag en av de snabbast växande regionerna i Europa och efterfrågan på bostäder i staden blir allt större för varje dag. För att uppnå de mål som finns om att bli Europas mest attraktiva storstadsregion behövs kompetent arbetskraft till staden för att fylla det behov som företagen efterfrågar nu och i framtiden. Den bostadssituation som råder för studenterna i Stockholmsområdet är dock väldigt dyster. Det saknas i dagsläget minst 7000 studentbostäder och kötiden för en studentbostad uppgår i dagsläget till minst två år. Trots detta ser vi inte någon större ökning av nyproducerade studentbostäder. När studenterna har svårt att hitta bostäder tenderar dessa att studera på annan ort och kunskap förloras, vilket hämmar Stockholms utveckling. Boverket kom 2009 med åsikten att man måste utreda alternativa lösningar för att lösa bostadsbristen för studenter. På senare år har man kunnat se projekt där befintliga fastigheter konverterats och ändrat användning från lokaler till studentbostäder. En utredning kring hur marknaden ser på detta alternativ har saknats. Denna rapport syftar till att studera studentbostadsmarknaden i Stockholm för att undersöka om konvertering av befintliga fastigheter är ett slagkraftigt komplement när nyproduktionen inte når upp till de mål som eftersöks. Genom att uppmärksamma ett antal återhållande faktorer har vi kunnat komma fram till ett antal slutsatser. Dagens system för planprocessen anses vara en faktor som gör att detta komplement inte kan utnyttjas till sin fulla grad. Ledtiderna uppges vara för långa och detaljplanens precisa och detaljerade utformning försvårar möjligheten att konvertera fastigheter. Med hjälp av fler handläggare och en mer öppen plan skulle detta komplement kunna tillämpas till sin fulla grad. Byggregler som tillämpas anses vara en annan anledning till att färre projekt genomförs. Samma byggregler som tillämpas för nyproduktion eftersträvas även vid konvertering. Marknaden söker en ändring av utformningen på dagens regler för att dessa ska vara mer tillämpbara och nyttiga för marknaden. Oförutsedda kostnader är en risk som alltid kommer vara ett orosmoln vid konverteringsprojekt men desto mer erfarenhet aktörerna har desto mindre blir risken. Subventionssystem är inte något som eftersträvas då resultatet pekar på att bidrag och investeringsstöd påverkar en marknad negativt i det långa loppet. Att hyresreglering för bostäder existerar anses inte vara en återhållande faktor för att detta komplement ska bli slagkraftigt

APA, Harvard, Vancouver, ISO und andere Zitierweisen

11

Raab, Jonathan David. „Consensus-building in electric utility regulation“. Thesis, Massachusetts Institute of Technology, 1992. http://hdl.handle.net/1721.1/28010.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

12

Prakash, Shiva R. „Breaking new ground in building green : the role of city policy and regulation in a building industry market transformation“. Thesis, Massachusetts Institute of Technology, 2010. http://hdl.handle.net/1721.1/59764.

Der volle Inhalt der Quelle

Annotation:

Thesis (M.C.P.)--Massachusetts Institute of Technology, Dept. of Urban Studies and Planning, 2010.
Cataloged from PDF version of thesis.
Includes bibliographical references (p. 96-99).
With a growing awareness of the need for a widespread reduction in the use of natural resources, including energy and water, buildings have been identified as a key component of America's, and the world's, drain on these finite resources. However, changing building practices that have been the norm for more than a century has proven to be a difficult task, with many challenges and interests to be accounted for. Implementing green building policies has not yet become a standard practice in most U.S. cities. This study looks at various policy approaches and outcomes that aim to address the impediments to a market transformation towards greener building. Among the cities that boast a significant amount of green buildings certified by a third-party rating system, many different factors and dynamics, with varying participation and responses from the public, private and non-profit sectors have resulted in different outcomes with respect to green building in that particular city. This study looks at the green building policy and implementation landscape in four cities: Boston, Boulder, Pittsburgh and San Francisco. Each of these case studies offers a robust look at how green building policies were created, both the process and the implementation, and the building industry's response to these policies and programs. In addition, it looks at other players and circumstances that contributed to the dynamics that surfaced in that city. Primarily, the goal of this study is to glean lessons from these four cities, to draw some general conclusions about what elements effective green building policy incorporates and the process and implementation strategies that resulted in success in practice. The conclusions also identify the supporting factors that play an indispensable role in a successful outcome. Ideally this study may offer some general guidance for cities that are considering how best to approach this particular challenge and aid in structuring a green building policy that will produce concrete results. The general findings of this study are that effective green building policy should facilitate a market transformation in the building industry towards greener development through mechanisms that address both the supply and demand of green building products and services. Successful policies were designed to stimulate market potential so the practice of greener building would ultimately be profitable to developers, building professionals and valued by consumers. The obstacles to green building becoming a norm in the building industry can be initially overcome by thoughtful, tailored policy and can be ultimately sustained by pure market forces.
by Shiva R. Prakash.
M.C.P.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

13

Salagoor, Jamaludden Yousef. „The influence of building regulations on urban dwelling in Jeddah“. Thesis, University of Newcastle Upon Tyne, 1990. http://hdl.handle.net/10443/863.

Der volle Inhalt der Quelle

Annotation:

Jeddah City is one of the largest cities in Saudi Arabia. It is not a new city, but is a result of a long period of history in which many experiences and regulations of urban dwelling were practised, based on trial and error. Jeddah's society has its own cultural values, traditions, systems, laws, and way of life, based on Islamic beliefs, which form its identity. It is a known fact that Islam does not prevent the benefit and adaptation of systems from other societies, through cross culture, but rather encourages this, with the stipulation that no harm will come to the Muslim socio-culture, and that there is no conflict with Islamic Shari'ah (law). Jeddah, through its long life, has experienced many regulations applied to its built environment. Some conformed with its socio-culture, but were abandoned one way or another, and new policies and regulations were substituted. It was thought that they would be suitable because they had succeeded in other societies, or it was thought that they would lead to urbanisation or that they would be easy to apply. Thus they were adopted, without being analysed against the need of Jeddah's Muslim society and its micro climate, to establish their suitability. Consequently, many problems occurred in the built environment. The main goal of this thesis is to analyse the regulations that have been applied in Jeddah City through it's long life by identifying their nature, their positive and negative impact on the urban dwelling and their conformity with Islamic Shari'ah (law). Based on the analysis, solutions and regulations, recommendations are suggested, aiming to be suitable for Jeddah's inhabitants and environment. To achieve this goal, the thesis is designed to have two main parts, each with chapters. Each chapter represents a distinctive stage in the planning of Jeddah City. The first part deals with evolution and analysis of Jeddah's urban dwelling components, urban fabric, building form, and typology, with a concentration on the influential factors that caused the evolutions. The second part deals with evolution and analysis of the influential regulation on Jeddah's urban dwelling, with concentration on the conformity with 'socioculture and values of the inhabitants. Thu s. the background of Islam and it's legal system is included in this second part as a prerequisite for the analysis. The study revealed that two distinctive factors regulate Jeddah's urban dwelling. The first is characterised by tradition and has great conformity with socio-culture with the effect of creating architecture suitable and fit for Jeddah's society and environment. The second is characterised by contemporary design and greatly conflicts with the society and environment of Jeddah. From the analysis of the causes and effects of the traditions and contemporary regulation on the urban dwelling. proposed solutions and recommendations of regulations and method of enforcement are drawn in the thesis conclusion to overcome the deficiency and conflict of the present applied regulations with Jeddah's socio-culture and environment.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

14

Smith, Stefan Thor. „Modelling thermal loads for a non-domestic building stock : associating a priori probability with building form and construction : using building control laws and regulations“. Thesis, University of Nottingham, 2009. http://eprints.nottingham.ac.uk/10895/.

Der volle Inhalt der Quelle

Annotation:

Building Energy Assessment at stock level is an important task in identifying the best strategies for achieving a more energy efficient and low carbon society. Non-domestic buildings are identified to make up 17% of total energy consumption in England and Wales and 19% of CO2 emissions. To understand the energy requirement of the non-domestic stock, large scale (empirically based) energy surveying has been carried out namely in the Non-Domestic Building Stock project and Carbon Reductions in Buildings project. It is recognised that building energy surveys are difficult to carry out; expensive on time, technical resources, and metered energy use is (on a large scale) necessarily crude. With improving computer ability, dynamic energy modelling tools allow for detailed assessment of building energy use and comfort performance. Using Monte Carlo simulation a method of assessing the probable variability in non-domestic building thermal energy loads was developed. The method was developed to capture the heterogeneity in non-domestic buildings at national stock level and determine how stock level physical form variations impact thermal loading. Non-domestic building form and surrounding topography are considered to be influenced by building control laws and building regulations. Control documentation often stipulates guidelines and best practice - hence building heterogeneity. As such, historical regulations were used to develop basic probability distributions of potential physical characteristics associated with non-domestic buildings. Stating that form and site characteristics are randomly determined from the defined probability distributions, a stochastic modelling process to represent thermal variation in a building stock was developed. This provided potential for categorising building thermal performance by period of construction. The model utilised a dynamic simulation model as a 'black-box' for predicting base thermal loads.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

15

Escobar, Dorothy Magasis. „The Effect of Federal Reporting Regulations on Hospital Investment in Community Building“. ScholarWorks, 2016. https://scholarworks.waldenu.edu/dissertations/2973.

Der volle Inhalt der Quelle

Annotation:

The role of hospitals as partners in community health improvement is changing, especially for nonprofit hospitals receiving tax exemptions in exchange for providing benefits to the community. There are examples of reported health improvement activities funded through hospitals' charitable donations, but there's a gap in the literature on the effect of policy and legislation on hospitals' investments in community building activities that address the social determinants of health. Grounded in eco-social theory, this quantitative, correlational study compared secondary data from CA's nonprofit hospitals' annual 2009 and 2012 reports to determine what, if any, changes have occurred in the hospitals' investments in community building since the 2010 implementation of the IRS' new community benefit standard. Matched-pair t test and chi-square goodness of fit tests were used to determine if there is a relationship between IRS regulations and how hospitals distribute their charitable dollars. Independent sample t test and ANOVA were run to determine if the characteristics of the hospitals studied were predictive of the changes found. Aside from a shift in the distribution of community building investments by types of activities, this study found no significant change in the use of nonprofit hospitals' community benefit funds to address the social determinants of health. Analysis did not indicate that current public policy supports hospitals' shift from sick-care institutions to institutions that promote population health. Rather, it revealed that CA's hospitals currently make only small financial contributions to activities that address the social determinants of health missing opportunities to leverage their resources to more effectively impact multi-sector efforts to improve population health and reduce health inequities.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

16

Embi, Mohammed Rashid. „An intelligent assistant for designing to fire regulations in Malaysia“. Thesis, University of Sheffield, 1997. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.267206.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

17

Andersson, Henrik, und Christoffer Bosson. „Landsbygdsutveckling i strandnära lägen : En kartläggande och jämförande studie av hur kommuner och Länsstyrelser tillämpar lagstiftningen“. Thesis, Högskolan Väst, Avdelningen för Matematik, Data- och Lantmäteriteknik, 2019. http://urn.kb.se/resolve?urn=urn:nbn:se:hv:diva-13999.

Der volle Inhalt der Quelle

Annotation:

2009/2010 infördes i Miljöbalken och Plan- och Bygglagen ett nytt begrepp, landsbygdsutveckling i strandnära lägen (LIS). Lagändringen genomfördes med motiveringen att områden med låg exploateringsgrad samt god tillgång till stränder skulle få en möjlighet till lättnader i strandskyddet, detta för att kunna erbjuda attraktiva lägen för boende och verksamhet inom kommunen. Sedan denna ändring infördes har kommunerna huvudansvaret för att pröva dispenser för strandskydd inom kommunen, Länsstyrelsen har huvudsakligen en granskande roll. När lagändringen 2009/2010 kom infördes det i Plan- och Bygglagen en möjlighet för kommunerna att sedan 1 februari 2010 peka ut LIS-områden inom kommunen i sin översiktsplan, tematiskt tillägg till översiktsplanen eller i en fördjupad översiktsplan. Syftet med denna studie är att jämföra och kartlägga hur 44 kommuner runtom i landet använder sig av LIS. Studien syftar även till att kartlägga hur olika Länsstyrelser i olika län runtom i landet arbetar tillsammans med kommunerna i frågan om LIS. Studiens första del är kvantitativ för att sammanställa den statistik som ligger till grund för studiens resultat. Studien innehåller även en kvalitativ del som syftar till att analysera den statistik som framställts inom studien. Studien mynnar ut i slutsatsen att kommunerna och Länsstyrelsen har olika syn på LIS i helhet, vilket syns genom de synpunkter som Länsstyrelsen lämnar till kommunen via sitt granskningsyttrande. Ett mönster för vilka synpunkter som är vanligast att Länsstyrelsen lämnar har uppmärksammats inom studien. De vanligaste synpunkterna från Länsstyrelsen är att kommunerna inte tillgodosett syftet med LIS, syftet med strandskyddet samt ett eller flera riksintressen som påverkar tillämpningen av LIS. Studien visar att kommunerna följer den lagstiftning som reglerar var LIS-områden får pekas ut. Studiens fördjupande del visar att kommuner med olika politisk styrning arbetar med LIS på varierande sätt. De huvudsakliga skillnaderna i hantering av LIS-områden beroende av politisk styrning är antalet områden som pekas ut. Den politiska styrningen inom en kommun har större inverkan på utpekande av antalet LIS-områden än kommunens geografiska läge i Sverige, enligt den fördjupande delen i studiens resultat.
2009/2010 a new concept was brought into Environmental code and Planning and Building Act, which was countryside development in areas close to shores (LIS). This amendment was motivated by that areas which have a low degree of exploited land area and high access to seaside areas would get an opportunity to reliefs in coastal protection regulations, in order to be able to offer attractive areas for living and establishing different activities within the municipality. Since the amendment came into force the main responsibility for approval of exceptions from costal protection regulations is on the county. The county administrative board main responsibility is to keep an eye on the granted approvals of the municipalities. The amendments in the Planning and Building Act resulted in the possibility for the municipalities to present areas in with a relief in coastal protection regulations, as a part of the comprehensive plan, an addition to the comprehensive plan or an extensive version for a part of the comprehensive plan. The purpose of this study is to investigate and compare how the legislation about LIS is applied, by studying 44 municipalities including the documents of comments from the county administrative board. The first part of the study is the quantitative part which contains collecting and compile information and statistics in which the study will be founded. The study also contains a qualitative part of analyzing the results obtained in the quantitative part. Overall the study shows that there is a disagreement between the municipalities and the county administrative board regarding costal protection regulation. The conclusion is based on the results from the study presenting the comments from the county administrative board to the municipalities during the final examine before the comprehensive plan is adopted by the municipal council. The results in the study show a pattern in the most frequent comments from the county administrative board compiled. The most common comment from the county administrative board is that the municipality has not fulfilled the purpose of the legislation about LIS. Furthermore, the municipality has not considered national interests in the municipal areas meant for LIS. The study shows that different political ideology has an influence on the execution of the legislation about LIS in municipalities. The results in the study show that the political ideology has an impact on the numbers of areas which the municipalities present as LIS. As a matter of fact, the impact of political ideology is greater than the impact of geographical similarities between two municipalities, according to the results in the study.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

18

Mazibuko, Patricia Ntombizodwa. „Redesign of core business processes of the national building regulations of South Africa“. Thesis, Cape Peninsula University of Technology, 2016. http://hdl.handle.net/20.500.11838/2351.

Der volle Inhalt der Quelle

Annotation:

Theses (MTech (Business Information Systems))--Cape Peninsula University of Technology, 2016.
This paper describes the redesigning processes of the National Building Regulations of South Africa. These processes are administered by the National Regulator for Compulsory Specifications (NRCS) in terms of the National Building Regulations and Building Standards Act 103 of 1977 (The Act). The application of the business processes and the Building Control Officers from various local authorities nation-wide who enforce the National Building Regulations and Building Standards Act, 103 of 1977 (hereinafter referred to as “the Act”) with particular reference to implementation of core regulatory business processes within the building industry in Southern Africa. The investigation was largely motivated by the high number of injuries, deaths and/or human lives affected adversely and reported due to collapsing and defective buildings. These disasters occurred at various Local Authorities, in private residential homes, government-owned buildings, abandoned and commercial buildings, such as shopping malls, have been investigated and reported by the Building Regulator, i.e. the NRCS in collaboration with the Department of Labour’s Commission of Enquiry between the years 2012 and 2014. The reports show that in those sectors of building, the local authorities’ Building Control Officers, as the legislated enforcers of the Building Regulations (with the oversight role played by the NRCS), experienced the highest levels of non-compliance by various parties who are affected by the Building Regulations, i.e. building owners or their legal representatives, built-environment professional practitioners and builders. This study applies the interpretive approach underpinned by qualitative methodology where interviews were used to collect data from building owners, prospective building owners, building occupants, built-environment practitioners, Local Authorities’ building control officers and The Regulator of the National Building Regulations. The empirical findings revealed that there is a critical need for business process review and strategy shifts that advance objectivity and benefits to compliance, visibility and awareness of regulatory process, the highlights of possible endangerment of human life due to non-compliance, the outlining of sanctions for failure to comply, and stakeholder liaison. The output is a re-module of business processes that will enforce and maintain compliance of the building regulations of South Africa.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

19

Huang, Huasheng, und 黃華生. „The effects of building regulations control on the design of private residential buildings“. Thesis, The University of Hong Kong (Pokfulam, Hong Kong), 2003. http://hub.hku.hk/bib/B31244944.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

20

Van, der Bank Marjoné. „The role of building regulations in sustainable local governance / van der Bank, M“. Thesis, North-West University, 2012. http://hdl.handle.net/10394/7580.

Der volle Inhalt der Quelle

Annotation:

This study highlights one way by means of which South Africa can become more sustainable namely by applying "green building" and "green design" in the local context. The study asks the question: What is the role of building regulations in sustainable local governance as provided for in South African environmental and local government legislation? Schedule 4(B) in conjunction with section 156(1) of the Constitution of the Republic of South Africa, 1996 (hereafter the Constitution) states that local government has the power to execute law–making and executive powers in relation to building regulations. The Constitution further provides in section 24, the environmental right, read together with section 152(1) that municipalities are co–responsible with the other two spheres of government to protect the environment and to secure an environment that is not detrimental to the health or well–being of people. The Local Government: Municipal Systems Act 32 of 2000 in section 4(2)(d), (i) and (j) further states that municipalities have the duty to provide services that is effective, fair and sustainable. Municipalities are bound by national legislation (including the National Environmental Management Act 107 of 1998 and national legislation dealing with building regulations, specifically the National Building Regulations and Building Standards Act 103 of 1977) in how it deals with and within the environment. The South African National Standards (SANS) 10400–XA: 2011 finds its application specifically on environmental sustainability and energy usage in buildings. The link between these laws and instruments (such as SANS and other projects) and the notion of "green building" is explored in this dissertation. Municipalities in the Western Cape Province are making an effort to adhere to the above national laws. More specifically the City of Cape Town has a Problem Building By–law and the Drakenstein Municipality (Paarl) has a green building manual to regulate "green building" and "green design". With reference to these two municipalities, this study serves to show that some South African municipalities strive toward "green building" and "green design", but more have to be done nationally in order to be pro–active in this regard.
Thesis (LL.M. (Environmental law))--North-West University, Potchefstroom Campus, 2012.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

21

Neeves, Anne Rebecca. „A pattern of local government growth : Sheffield and its building regulations, 1840-1914“. Thesis, University of Leicester, 1991. http://hdl.handle.net/2381/35578.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

22

Foster, Michelle Elizabeth. „Energy conservation in the UK housing sector : an exploration of technical and social issues“. Thesis, Open University, 1997. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.389249.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

23

Sigge, Erik. „Architecture's Red Tape : Government Building Construction in Sweden, 1963-1973. The example of the National Board of Public Building, KBS (Kungliga Byggnadsstyrelsen)“. Doctoral thesis, KTH, Arkitekturens historia och teori, 2017. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-212976.

Der volle Inhalt der Quelle

Annotation:

Architecture’s Red Tape is a critical study of the relation between public architecture and public administration in the 1960s and 1970s. The thesis focuses on the work of the Swedish National Board of Public Building, KBS, which was a government agency in charge of providing premises for the Swedish state at that time. KBS expanded its construction of new buildings during the 1960s and did extensive research and development work to find new rational and efficient working methods and building systems. The development of KBS culminated in the implementation of an official architectural philosophy in 1968, called the “structure philosophy.” The architectural ideas were drafted parallel to new administrative systems that were in turn based on rational choice theories. The thesis studies the developments of KBS’ architecture, both as processes of building production (architecture practice) and as the built result of these processes (buildings), through the analysis of four different instruments. These instruments – Program Budgeting, KBS’ Structure Philosophy, Incentive Contract, and System Building – were important means in KBS’ efforts to rationalize building production and make operations more efficient. KBS highlighted new features in the practices of architecture – emphasizing process, the user, functionality, performance, evaluations, results, etc. – that could be reviewed as a redefinition of the architectural project. This review is explicit on two different levels: firstly, as a redefinition of the architectural object most clearly found in KBS’ publicly announced shift from building construction to “premises production.” Secondly, there is a redefinition of architectural practice that relocates the interest of design, making it more about programming with a heightened interest in the processes of defining the scope and problems of design.

QC 20170825

APA, Harvard, Vancouver, ISO und andere Zitierweisen

24

Lundin, Johan. „Safety in case of fire : the effect of changing regulations /“. Lund : Dept. of Fire Safety Engineering, Faculty of Engineering, Lund University, 2005. http://www.brand.lth.se/bibl/1032.pdf.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

25

Lloydd, Delwyn. „Evaluation of the Conceptual Framework for Performance Based Fire Engineering Design in New Zealand“. Thesis, University of Canterbury. Civil Engineering, 2008. http://hdl.handle.net/10092/2754.

Der volle Inhalt der Quelle

Annotation:

The Department of Building and Housing is currently developing a performance framework that will, if adopted, provide a compulsory methodology for performance based fire engineering designs to prove compliance with the fire safety requirements of the New Zealand Building Code. The conceptual performance framework currently includes eight design fire scenarios, fire loads for particular building uses, and tenability criteria for the life safety of occupants. As the level of fire safety within the Code is not explicit, the Department of Building and Housing determined that the performance framework for fire should ensure buildings are designed and built to provide the same level of safety as if they complied with the current Compliance Document for New Zealand Building Code Fire Safety Clauses, C/AS1. This work analysed 12 buildings with a range of uses, which comply with the current C/AS1, using the conceptual performance framework to provide a risk comparison for life safety. Accepted, previously established calculation and modelling methods were used to test the case buildings to the performance framework. None of the buildings met the pass criteria proposed for life safety. Consequently, to comply with the performance framework, a building would be required to be designed to a higher level of safety than is currently accepted to meet code. This shows the current proposal provides a more onerous design regime for fire safety for buildings than the current C/AS1. The results of this research show the conceptual performance framework for fire safety is not ready to be included into New Zealand building regulations in its present form. Furthermore, protection from fire for primary structural members and systems, to protect against building collapse, and tenability criteria and fire fighting access for fire fighters needs to be developed and included in the framework.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

26

Key, M. A. „Regulating sustainable development : an enabling model for consistent collaboration between planning and building control services in England“. Thesis, University of Salford, 2016. http://usir.salford.ac.uk/38980/.

Der volle Inhalt der Quelle

Annotation:

Planning (often termed as development control) and building control have existed as public regulatory services on a national basis in England since the expansion of industrialisation in the 19th Century. Since then, the professions have collectively served the interests of local communities but have primarily worked in a mono-disciplinary context. This disciplinary isolation was compounded when the public building control system was opened up to competition from the private sector in the 1980s. Since the beginning of the 21st Century, building performance standards have become increasingly complex due to the introduction of sustainable development as a major policy objective. As a result, disciplinary boundaries have become blurred, with many stakeholders viewing regulation as a constraint to sustainable development. In light of the modern challenges of regulating the built environment, this thesis aims to develop a model with the capacity to enable consistent collaborative practice between planning and building control services in England. In doing so, it seeks to address problems associated with the disparate array of existing building performance standards, the resulting and widening regulatory skills gap and ultimately, the fragmented nature of the regulatory service delivery framework. In keeping with the problem solving ethos of the research, the design science research methodology was utilised, with research methods drawing upon a mixture of attributes common to consensus development and grounded theory research strategies. Building upon the author’s experiences as a building control manager, the adopted research approach resulted in iterative movements throughout the study between a broad base of existing knowledge and theory, and semi-structured interviews with experts in the field. The findings of the research indicate that the creation of domestic and commercial codes for sustainable development, interdisciplinary undergraduate educational initiatives and performance driven regulatory social enterprise offer the potential to address existing field based problems. In addition, evidence suggests that the model resulting from the study has the capability to move the often conflicting processes of design and regulation towards being conjoined as part of a dynamic unfolding process with sustainable outcomes.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

27

Al-Fahad, Jasem Y. „Reform of building codes, regulations, administration and enforcement in Kuwait : within the legal, administrative, technical & social framework“. Thesis, Loughborough University, 2012. https://dspace.lboro.ac.uk/2134/9883.

Der volle Inhalt der Quelle

Annotation:

The majority of building code development and implementation practices are normally connected with the progress of construction community changing awareness, needs and perspectives, advanced technology in construction and new level of knowledge. Unproven practices and the technology of building code development and implementation in case of insufficient and outdated codes, the use of unproven advanced codes of other countries, or the infringement of the existing codes, in most cases, could lead to a large number of shortcomings of minimum requirements of public health, safety and general welfare, and poor quality of buildings. Every aspect of a building code development and implementation practice could be influenced by insufficiencies and infringements in building codes/regulations that could cause buildings failures. Generally, the success of a building code development and implementation practice is directly connected with the involved insufficiencies and infringements in the framework of building code (legal, Administrative, technical, & social), i.e. faults of building code development and implementation should be successfully resolved in order to come to an end of a building project assuring code's objectives (public health, safety and general welfare). One of the early research problems of building code development and implementation practice was conducted by Productivity Commission (2004) where the research organized and categorized the causes of shortcomings of BC according to four main functions of building code, including legal, administrative, technical, and social functions. Productivity Commission Research had been the starting point of research problems of building codes in Kuwait. For the past 20 years, many researchers have high numbers of categories, components and rankings to explain different types of insufficiencies and infringements in building codes/regulations. However, these categories and rankings produce inconsistent and overlapping cause and impact factors. In addition, researchers and practitioners at this point tend to focus on the technical and administrative sides related to the issues of building codes development and implementation, and neglecting the importance of legal and social sides. Legal issues like finding a law to prepare and enforce building codes, cover of insurance companies, building materials testing system, weak regulations related issues, building specifications, and clarity of regulation texts; as well as social issues like community awareness, issuing and enforcing legal court rules, deterrent punishments for violators, violations or cheatings in related issues, all of these were deemed not that critical by most reviewers. The research is specifically concerned with the insufficiencies and infringements in building codes/regulations which cause shortcomings of minimum requirements of public health, safety and general welfare, and how related cause and impact factors are selected and organized. Existing research highlights the need for further researches of how to relate between research and building regulations that are at present. There is evidence that construction industries around the world have little experience in this area (CIB TG37, 2001). The proposal within this research is to address this aspect of the debate by seeking to clarify the role of the four functions of building code; legal, administrative, technical, and social function as a frame of reference that stakeholder parties (building officials, design and construction professionals) might agree with and which should act as the basis for the selection and formation of occurrences of cause factors, and their iv impact on public health, safety and general welfare. The focus on the four functions of building code as a fault (cause) frame of reference potentially leads to a common, practical view of the (multi) dimensionality setting of fault (cause) within which cause factors may be identified and which, we believe, could be grounded across a wide range of practices specifically in this research of building code development and implementation. The research surveyed and examined the opinions of building officials, design and construction professionals. We assess which fault (cause) factors are most likely to occur in building and construction projects; evaluate fault (cause) impact by assessing which fault (cause) factors that building officials, design and construction professionals specifically think are likely to arise in the possibility of shortcomings of minimum requirements of public health, safety and general welfare. The data obtained were processed, analyzed and ranked. By using the EXCEL and SPSS for factor analysis, all the fault (cause) factors were reduced and groups into clusters and components for further correlation analysis. The analysis was able to prove an opinion on fault (cause) likelihood, the impact of the fault (cause) on the objectives of building code. The analysis indicates that it is possible to identify grouping of insufficiencies and infringements in building codes/regulations that is correspondent to the different parts of the framework of building code (legal, Administrative, technical, & social) these suggest three identified groups when viewing cause from the likelihood occurrence and four identified groups and their impact for each building code objective. The evidence related to the impact of building code objectives, view of cause, and provides a stronger view of which components of cause were important compared with cause likelihood. The research accounts for the difference by suggesting that a more selection and formation of cause and impact, offered by viewing cause within the context of a framework of building code, and viewing impact within the context of building code objectives (public health, safety and general welfare) allows those involved in building code development and implementation to have an understandable view of the relationships within cause factors, and between cause and impact factors. It also allows the various cause components and the associated emergent clusters to be more readily identified. The contribution of the research relates to the assessment of cause within a construction that is defined in the context of a fairly broad accepted view of the framework of building code (legal, Administrative, technical, & social). The fault (cause) likelihood construction is based on the building code framework proposed in this research and could facilitates a focus on roles and responsibilities, and allows the coordination and integration of activities for regular development and implementation with the building code goals. This contribution would better enable building officials and code writers to identify and manage faults (causes) as they emerge with BC aspects/parts and more closely reflect building and construction activities and processes and facilitate the fault (cause) administration exercise.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

28

Mieldazys, Judita A., und Judita mieldazys@dpcd vic gov au. „The International Development of Performance-Based Building Codes and Their Impact on the Australian Construction Industry in Offshore Trade“. RMIT University. Property, Construction and Project Management, 2005. http://adt.lib.rmit.edu.au/adt/public/adt-VIT20090724.120856.

Der volle Inhalt der Quelle

Annotation:

The interplay of forces behind globalisation, promoting trade and prosperity, and the desire for offshore trade are not fully understood. This is further complicated by the role of the political economy, global sovereignty versus national boundaries, economic status of a country and community needs. The literature found that 'one size does not fit all'. Globalisation results in the consideration of global similarities such as standards, harmonisation of laws, international codes and the growth of international organisations. In addition, there is international pressure to adopt 'performance-based' designs by members of the World Trade Organization countries in order to promote trade. This research examines the development of performance-based building codes at the international level, its benefits and issues and whether it will achieve a positive impact on trade for the Australian construction industry.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

29

Vermeulen, Bernard. „The role of a design engineer in safety of building projects“. Thesis, Stellenbosch : Stellenbosch University, 2014. http://hdl.handle.net/10019.1/86355.

Der volle Inhalt der Quelle

Annotation:

Thesis (MEng)--Stellenbosch University, 2014.
One of the causes for money to be wasted on construction sites is accidents. The reason is that an accident on site is an unplanned event typically relating to the loss of production or the loss of life. Many industry stakeholders and role players have focused on construction health and safety and to improve this area of concern; however, construction health and safety are not significantly improving. Construction still continues to contribute a large number of fatalities and injuries relative to other industry sectors. During the construction phase, poor construction health and safety performance is attributable to a lack of management commitment, inadequate supervision, and a lack of health and safety training and - systems. Health and safety systems do not only include excellent health and safety management on site, but rather an integrated approach on health and safety issues from the conceptual design phase by all stakeholders participating. This integrated approach includes the design done by the engineer. The inspiration behind this research is the question of whether South African Engineers design buildings safe for construction. The lack of knowledge by engineers with regard to construction processes, the lack of health and safety enforcement in the engineering offices and construction sites, and whether engineers adhere to safe design principles is the subject of investigation in this research. Therefore, this research aims to investigate the role of the design engineer in the safety of building projects. Specifically, it investigates to what extent the design engineer can contribute to site safety, and to what extent this is actually taking place. The Construction Regulations states the engineer can be appointed to act on behalf of a client and should share any information that might affect the health and safety of construction employees with the contractor. By means of a literature study, the investigation of case studies and the investigation of questionnaires to which a percentage of South African engineers responded, this research identified the information that should be shared by the design engineer with the contractor. The information can be shared by indicating hazardous activities or - locations on the actual drawings. Information can also be shared by specifying and reminding the contractor of certain health and safety hazards in the health and safety specifications of the building project. Although the Construction Regulations state that the safety hazards associated with most construction processes are the responsibility of the contractor, it will be beneficial for the safety of the employees if the engineer also consults the contractor on the hazards identified by him or her during the early design stages. Early collaboration between the engineer and contractor is also beneficial for the safety of construction employees. The result is an integrated approach towards safety hazard identification and mitigation. Having adequate knowledge with regard to construction processes allows the engineer to be aware of possible safety hazards. This will result in the correct information to be shared with the contractor and incorporated into the early design phases of the project to ensure a healthy and safe working environment. The study shows that a percentage of South African engineers have a lack of site experience, a lack of safety training, a lack of knowledge with regard to the content of the Construction Regulations, and a lack of knowledge with regard to construction processes. These shortcomings can be detrimental to site safety.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

30

Raslan, R. M. S. „Performance based regulations : the viability of the modelling approach as a methodology for building energy compliance demonstration“. Thesis, University College London (University of London), 2010. http://discovery.ucl.ac.uk/134389/.

Der volle Inhalt der Quelle

Annotation:

With the increasing international shift from prescriptive to performance-based regulations, a legislative call for the integration of predictive assessment tools in the design process has emerged. In relation to this, the requirements of Article 3 of the Directive on Energy Performance of Buildings (EPBD) were transposed into UK legislation with the introduction of the Building and Approved Inspectors (Amendment) Regulations 2006 (England and Wales) in April 2006. These introduced the ‘National Calculation Methodology’ (NCM), a unified compliance demonstration route for energy performance criteria specified in Approved Document Part L (Conservation of Fuel and Power), supported through the use of modelling-based building energy performance prediction (BEPP) tools accredited for the purposes of implementing associated calculations. This thesis presents an assessment of adopting the methodology, utilising a mixed-method research design to investigate key parameters identified as measures by which to quantify the success of this approach. Firstly, the adaptive capability of the UK construction industry is assessed through the analysis of primary data collected from a longitudinal survey. Secondly the applicability of the methodology is analysed through in-depth interviews examining the role of key actors and the varying dynamics of implementation and enforcement. Finally, a comparative evaluation is carried out to assess the adequacy of accredited BEPP tools. The main findings outline the shortcomings of the adaptation strategy adopted by industry and the inconsistent implementation and enforcement strategies employed. The results of the comparative tool study in particular highlight three important issues; a large degree of predictive variability between key compliance benchmarks, the lack of consistency in granting approval (a pass/fail result) between tools and limitations in the scope of their applicability. The research concludes that although a number of positive aspects can be associated with the introduction of a modelling-based approach for compliance demonstration, due to the aforementioned issues, considerable efforts are still required to extend its usefulness as a credible legislative support tool for performance-based regulations.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

31

Keevil, Philip Samuel. „Feasibility of representing selected elements of the 1985 Building Regulations in Prolog or other rule-based form“. Thesis, Open University, 1996. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.242515.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

32

Zentner, Sara. „The impact of energy- and building policy on property companies in Sweden : Mandatory regulations vs. voluntary commitments“. Thesis, Stockholms universitet, Kulturgeografiska institutionen, 2017. http://urn.kb.se/resolve?urn=urn:nbn:se:su:diva-145115.

Der volle Inhalt der Quelle

Annotation:

What forces are today driving large property companies in Sweden to save energy and increase energy performance in buildings? This master thesis focusing on mandatory- and voluntary policy has used a Political Science perspective on Urban Planning questions. In this qualitative case-study, interviews were conducted with 7 out of the 10 biggest property companies in Sweden. It includes both an investigation into which policies are found to be relevant for companies as well as a discussion about which actors are pushing them to reduce energy and become more sustainable. Results show that companies make voluntary commitments that go beyond what current mandatory building- and energy regulations demand. Instead they use voluntary policy 25-35% below BBR-levels, mainly by using building certification Miljöbyggnad, to certify and communicate their efforts. All companies have energy targets published in yearly reports and continuously work to reduce their energy- and emissions output. Yearly reports also show that 6 out of 7 companies now use the Global Reporting Initiative (GRI). Some have joined benchmarking initiative GRESB or the CDP. The use of voluntary informational disclosure systems show that companies are under increasing pressure to become more (verifiably) sustainable.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

33

Krejčí, Michal. „Bytový dům v Třebíči - příprava a realizace stavby“. Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2012. http://www.nusl.cz/ntk/nusl-225616.

Der volle Inhalt der Quelle

Annotation:

This Master’s thesis deals with the technological project and realization of apartment house in Třebíč. This work includes technical reports ZS and STP, site equipment, wider transport relations, budget calculation, time planning, inspection and test plan, design mechanisms and job security for this building.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

34

Awawdeh, Siba Adel. „The Potential of Building Regulations to improve the Energy Efficiency of High Rise Residential Buildings in the Gulf Countries“. Thesis, Queen's University Belfast, 2010. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.527656.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

35

Williams, George Reese. „Assessing the Repercussions of a Mass Departure of Building Inspectors from the Code Professional Industry in Utah“. BYU ScholarsArchive, 2015. https://scholarsarchive.byu.edu/etd/5609.

Der volle Inhalt der Quelle

Annotation:

National studies suggest that eighty percent of existing code professionals are expected to retire within the next fifteen years. As part of this research, it was determined that approximately half of all licensed building inspectors in the State of Utah will reach retirement age within the next ten years. As building inspectors make up a large part of the Code Professional Industry this demographic was selected as the focus of this research. The purpose of this research project was to assess the urgent need for new entrants into the Code Professional Industry in Utah. As part of this research, trends within the local industry over a 20 year period were evaluated. A statewide survey of over 300 licensed building inspectors was conducted to investigate the demographics of the industry, and gain first-hand insight from individual code professionals. This research was successful in quantifying the size of the Code Professional Industry in Utah, and numbering the populations of certified professionals in each individual code discipline. In addition, projected losses were established within each code discipline, discovering many disciplines in which over 50% of current professionals would be lost within a ten year period. In addition projections were made contrasting the number of code professionals leaving the industry versus the small anticipated number of individuals entering the industry. This research conclusively predicts a steady and dramatic decline in the number of licensed code professionals, unless the industry actively works toward addressing the issue. The group of aging code professionals possess a level of knowledge and experience not easily replaced. This study was based on an extensive statewide survey of licensed building inspectors in Utah, and collected opinions, concerns and insights directly from the Code Professional Industry. The findings of this study provide a unique look at this specialized industry within a single state. The lessons learned likely apply to populations of code professionals in other locations. This study concluded that a combination of phased retirement, modified work duties and mentoring programs would be of great benefit to the Code Professional Industry, by allowing the transfer of knowledge between the outgoing generation and the future generation of code professionals.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

36

Sonesson, Tim. „Sveriges bostadsbrist“. Thesis, Umeå universitet, Kulturgeografi, 2021. http://urn.kb.se/resolve?urn=urn:nbn:se:umu:diva-184003.

Der volle Inhalt der Quelle

Annotation:

Sweden’s housing crisis Tim Sonesson ABSTRACT: This study aims to describe and analyze Sweden’s housing crisis. The purpose is to better understand why Sweden has a lack of housing in most of her municipalities. So that in the long run the current situation can be improved. The study is a literature study of materials such as state investigations, numbers from SCB (Swedish statistics bureau) and a variety of other different material.The main point is that the building speed does not correspond to the increase in population. Therefore, this study lifts the population development and different regulations, taxes, and subsidies regarding housing construction. The study compares Sweden to a handful of comparable countries with focus on regulations. Mismatches in demand and supply regarding the housing market is also brought up. More topics that in some way relates to this issue are brought up such as the competition in the construction market could be unhealthy and that could be why the construction prices are high. Maybe there is a fear of really take care of the problem from the government due to the last big housing projects failures (Miljonprogrammet). Sweden tops the list of most single households in the world, that could be a small part of the problem. The study also goes through the role of the Swedish municipalities which has a big role to play in the housing situation. Finally, the study tries to look forward to get some sort of grip in which direction Sweden is going, if the housing crisis is going to be solved any time soon or not.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

37

Vaněk, Jiří. „Technologický projekt sportovní haly v obci Nové Veselí“. Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2012. http://www.nusl.cz/ntk/nusl-225618.

Der volle Inhalt der Quelle

Annotation:

This Master's thesis deals with the technological project of sports hall in New Veseli . This work includes the construction and technological equipment for the study site , ZOV , technological regulations, building equipment, wider transport relations, budget calculation , time planning , inspection and test plan , design mechanisms , job security this building , balance resources.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

38

Bilgic, Umut. „New Building In Historical Settlement As An Urban Conservation Problem: A Case Study In Tarsus“. Master's thesis, METU, 2004. http://etd.lib.metu.edu.tr/upload/12604814/index.pdf.

Der volle Inhalt der Quelle

Annotation:

This thesis develops around the theme of new building problem in historical settlements. Rapid and uncontrollable urbanization due to industrialization and over dense population is resulting in the demolishment of the existing historical settlements in our country. Despite this change, as the main goal of conservation is to provide historical continuity, the existence of the new buildings in historical settings as the products of this process come out to be an urban conservation problem. The current regulations for the new buildings in historical settings being applied in the norms of conservation plans are usually inadequate to bring out successfully integrated new buildings with the traditional setting due to their standard approaches to the problem. In that sense within this thesis study, Kizilmurat district of Tarsus is selected as the study area and a methodology is referred that considers the identity of the settlement and comments on the current regulations for the introduction of a proposal new building principles. Within the light of these proposed principles existing new buildings as the latest layer of the settlement are also evaluated and several interventions are brought out.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

39

Juračka, Lukáš. „Průmyslový areál AQUASYS - stavebně technologický projekt“. Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2012. http://www.nusl.cz/ntk/nusl-225378.

Der volle Inhalt der Quelle

Annotation:

This Master’s thesis deals with the technological project of building an industrial complex AQUASYS in Žďár nad Sázavou. This work includes technical reports ZS and STP, site equipment, wider transport relations, budget calculation, time planning, inspection and test plan, mechanical assembly, contract for work and job security for this building.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

40

Pettersson, Josefine, und Melinda Winninge. „Sveriges första hälsocertifierade kontor : Lärdomar från implementering av certifieringen WELL Building Standard“. Thesis, Luleå tekniska universitet, Industriellt och hållbart byggande, 2018. http://urn.kb.se/resolve?urn=urn:nbn:se:ltu:diva-68826.

Der volle Inhalt der Quelle

Annotation:

Andelen miljöcertifierade byggnader har under 2000-talet ökat. Inom kommersiella fastigheter är det numera inte lika ovanligt att kontor miljöcertifieras och en ny aspekt har etablerat sig bland certifieringssystemen - människans välbefinnande. WELL Building Standard är ett hälsocertifieringssystem som sätter människan i centrum. Systemet har under 2017 gjort inträde på den svenska marknaden och det första projektet står klart för verifiering under våren 2018. Detta projekt är Castellums huvudkontor i fastigheten Klassföreståndaren 3 i Stockholm, även kallad Flat Iron Building. Syftet med studien är att bidra till större kunskap om WELL Building Standard under svenska förhållanden och underlätta fortsatt etablering av hälsosamma byggnader. Målsättningen med studien är att identifiera lärdomar från certifieringen av projektet enligt WELL Building Standard - New & Existing Interiors - genom att besvara följande frågeställningar:

APA, Harvard, Vancouver, ISO und andere Zitierweisen

41

Soliman, Junior João. „Framework para suporte à verificação automatizada de requisitos regulamentares em projetos hospitalares“. reponame:Biblioteca Digital de Teses e Dissertações da UFRGS, 2018. http://hdl.handle.net/10183/182369.

Der volle Inhalt der Quelle

Annotation:

Empreendimentos hospitalares são reconhecidos pela complexidade que está associada a todas as fases de seu ciclo de vida: projeto, construção e operação. Os projetos da saúde são altamente influenciados por regulamentações locais. Estes conjuntos de códigos e legislações contém informações prescritivas e são importantes ao projeto, uma vez que as especificações são, usualmente, definidas de acordo com os critérios neles contidos. Ao longo do processo de desenvolvimento de produto, as especificações devem ser verificadas frente aos requisitos extraídos destas regulamentações. Este processo, se realizado manualmente, tende a ser demorado e propenso a erros. Tentativas de desenvolvimento de sistemas de verificação automatizada não se mostraram completamente satisfatórias. Muitos dos problemas estão relacionados à forma como novas abordagens são concebidas, muitas vezes desenvolvidas de acordo com métodos codificados e fragmentados, e à tipologia de informação que está nas normas e regulamentações. A abordagem metodológica utilizada nesta pesquisa foi a Design Science Research. Como artefato, foi desenvolvido um framework com base na abordagem semântica, para fornecer suporte ao desenvolvimento de sistemas de verificação automatizada, com ênfase em requisitos regulamentares no contexto de projetos de edificações hospitalares. As principais contribuições teóricas deste estudo, portanto, estão relacionadas às taxonomias e às transformações da informação, bem como às relações entre os constructos utilizados. Os resultados indicam que a natureza das regulamentações possui impacto significativo na possibilidade de tradução em regra lógica parametrizável. Apesar de a automação ser desejável, os resultados deste estudo indicam, ainda, que atualmente nem todos os requisitos podem ser completamente traduzidos em termos de processamento e verificação automatizados. Apesar de este fato diminuir o nível geral de automatização no processo, ele pode trazer benefícios ao contexto de projetos da saúde. O atendimento de alguns dos requisitos depende em um certo grau, em critérios subjetivos, que estão relacionados à interpretação humana e à criatividade.
Healthcare facilities are recognized for the complexity associated to all phases of their lifecycle: design, construction and operation. The design of healthcare projects is highly influenced by local healthcare regulations. These legislations usually contain prescriptive information and play an important role, as design specifications should be defined based on the criteria defined therein. In the design phase, during the product development process, requirements extracted from legal regulations must be verified against design specifications. This process, if done manually, tends to be time consuming and error prone. Attempts to develop automated rule checking systems for healthcare projects have not been fully successful. Most flaws appear to be related to the way new approaches are conceived, being mostly developed according to hard-coded and fragmented approaches, and the typology of information bounded by the regulations. The methodological approach adopted in this investigation was the Design Science Research. The main outcome of this research study is a semantic-based framework, devised to support the development of automated rule checking systems, focused on regulatory requirements of healthcare building design. The main theoretical contributions of this research work are concerned with the taxonomies and information transformation, as well as the relationships among the constructs involved. The results indicate that the nature of regulations have a major impact on the possibility of translating them into logic rules. Even though automation is desirable, the findings of this study also indicate that currently not all requirements can be fully translated into rules for automated processing and checking. Although this decreases the overall degree of automation in the process, this fact may provide benefits to the healthcare context. The fulfillment of some requirements to some extend should rely on subjective criteria, which depends on human interpretation and creativity.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

42

Music, Nermina, und Hilda Lund. „Energianalys av Sveriges största skola byggd med passivhusteknik“. Thesis, Linnéuniversitetet, Institutionen för byggteknik (BY), 2018. http://urn.kb.se/resolve?urn=urn:nbn:se:lnu:diva-76613.

Der volle Inhalt der Quelle

Annotation:

För att uppnå Sveriges energimål har servicesektorn börjat bygga energieffektiva byggnader. I detta examensarbete har energiberäkningar med hjälp av VIP-Energy utförts för Elmeskolan som är byggd enligt passivhusteknik. Resultatet av energiberäkningen har jämförts med kraven enligt BBR 22 och 25 och passivhusstandarden. Det visade sig att kraven för BBR och passivhusstandarden uppfylldes. Även en beräkning av energiprestanda för BBR 22 och 25 med avseende på bergvärme och fjärrvärme har tagits fram med hjälp av definitioner enligt Boverkets byggregler. Energiprestandan för bergvärme visade sig vara lägre än för fjärrvärme. Tre LCC-kalkyler har utförts med hjälp av en Excel-mall. Den beräknade energiprestandan för Elmeskolan samt det maximala kravet för energiprestanda för passivhusstandarden och BBR 22 har legat till grund för kalkylen. Kalkylen resulterade i att Elmeskolans energikostnad var en fjärdedel i jämförelse med kravet för BBR 22. Syftet med denna studie är att resultatet ska påvisa fördelarna med att uppföra byggnader med passivhusteknik samt påvisa energieffektiviteten för ett passivhus.
In order to achieve Sweden's energy goals, the service sector needs to build energy-efficient buildings. Therefore, the national board of housing, building and planning proposed building regulations called BBR that consists of requirements and general recommendations for both new and existing building and contains multidimensional aspects including energy management in the building. Passive house building is also another promising solution to approach an energy efficient building. The main aim of this study is to assess the energy performance of a case study building according to the both BBR and passive house building criteria. Correspondingly, Elmeskolan, which has been built based on passive house standards, is chosen as the case study and a model is developed using a building energy-modelling program, VIP-Energy. The result of the energy calculation has been compared with the requirements of BBR 22 and 25 and the Passive House Standards. The study shows that the requirements for BBR and Passive House Standards were met for the case studied building. The primary energy demand of the heat supply system in the building is assessed by considering either geothermal or district heating system according to the Boverket’s energy management building regulations. It is concluded that the primary energy demand in case of using geothermal system is lower than district heating system to supply building heating demand. A simplified LCC analysis has been considered in this study due to the passive house standard and BBR 22 and 25 building regulations. The results show energy cost of the case studied building that is built based on passive house criteria is 25 % of total energy cost of similar building that built based on BBR 22 requirements. The results show the benefits of passive house requirements in comparison with BBR regulations for the case studied building in terms of thermo-economic objectives.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

43

Figlali, Umut. „Exploration Of Factors Affecting The Execution Of International Design Projects“. Master's thesis, METU, 2005. http://etd.lib.metu.edu.tr/upload/12605932/index.pdf.

Der volle Inhalt der Quelle

Annotation:

Economic instabilities in our country over the past few decades and improvement in communication technologies, have encouraged Turkish construction firms to utilize business opportunities in foreign countries. However, working abroad brings with it certain risks and problems. The aim of this thesis were to define and clarify problematic factors during the design stages in international design projects (IDP), to collect relevant suggested solutions and to try and determine the sources of these factors. The survey starts with general problems and/or factors which affect international projects and continues to examine whether these problems are the same as those faced in the architectural field. Also, the place of the Turkish construction industry in the world market, the reasons for the increase in international projects and the problems which might be faced while executing IDP have formed the scope of this thesis. To this end informal interviews were carried out with managers and design professionals of architectural firms, based in Ankara, which were involved in international projects, in order to determine types of problems encountered in execution of IDPs. The first questionnaire was based on insight gained from these interviews. Thereafter, the results of the first questionnaire formed the basis of the second questionnaire, which was delivered more extensively. According to the research carried out in this study, the major effective factors in execution of IDPs could be listed as, cultural differences, communication within the project team, information technologies, standards and regulations, client and local authorities and economical situation of target country.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

44

Thuresson, Henrik, und Fredrik Persson. „Fuktproblematiken : En studie om fuktsäkerhet på byggarbetsplatsen“. Thesis, Karlstad University, Faculty of Technology and Science, 2007. http://urn.kb.se/resolve?urn=urn:nbn:se:kau:diva-1160.

Der volle Inhalt der Quelle

Annotation:

Kostnaderna för fuktskador i Sverige uppskattas årligen uppgå till mångmiljard belopp.

Fuktskador i byggnader medför också en ökad risk för ohälsa hos brukarna. Kunskapen för

att producera fuktsäkra byggnader finns men utnyttjas inte i den omfattning den borde.

Den 1 juli 2007 träder en ny upplaga av Boverkets byggregler i kraft. Förtydliganden har

gjorts i avsnittet gällande fukt, vilka underlättar verifieringen av entreprenadens

fuktsäkerhet. Reglerna innefattar också krav på kritiska fukttillstånd i material. Denna studie

syftar till att kartlägga brister i produktionsskedet och hur produktionen kan utvecklas för att

motsvara de i Boverkets byggregler ställda krav på fuktsäkerhet.

Intervjuer har förts med olika representanter i byggbranschen för att ge en helhetssyn av

fuktproblematiken. Göran Hedenblad vid Boverket menar att tillsynen och kontrollen av

fukt kan och måste bli bättre på byggarbetsplatsen. Fuktkonsulten Tord Nilsson hävdar att

de nya kraven innebär ett paradigmskifte som medför stora förändringar på dagens sätt att

producera byggnader. De intervjuer som gjordes med beställare och entreprenör visar dock

på både bristande fuktkunskap och bristande strategi för att nå ett fuktsäkert byggande.

Vid fältstudien påvisades brister i produktionen med avseende på skydd av material och

konstruktion, uttorkning och utförandet av fuktkvotsmätningar. Många av dessa brister

härrör från att fuktproblematiken inte har en central roll vare sig i program-, projekteringseller

produktionsskedet. Vidare konstateras att kunskapsnivån för att hantera fukt kan

utvecklas hos all personal och i alla delar av byggprocessen.

Av de observationer som gjorts under fältstudien har åtgärdsförslag till en ökad fuktsäkerhet

sammanställts i rapporten. Vidare har ett informationsblad utarbetats för att informera om

fukt och dess skadeverkningar samt att ge några förslag till åtgärder som kan förbättra

fukthanteringen ute på byggarbetsplatsen. Informationsbladet bör placeras på

byggarbetsplatsen för att stödja entreprenören i sitt fuktsäkringsarbete.

Eftersom ramverket för projektet är fastslaget då produktionsfasen tar vid innebär detta

begränsningar för fuktsäkerhetsarbetet. För att skapa bättre förutsättningar för en fuktsäkrare

produktion anser vi att en fuktsakkunnig skall anlitas så tidigt som möjligt i projektet.

The costs regarding moisture damages in buildings in Sweden are expected to reach several

billions SEK each year. These moisture damages also result in an increased risk regarding

health issues among the users. The knowledge of how to produce moisture secure buildings

exists, but it is not beeing used to the extent it could be.

The first of July 2007 a new edition of Boverket´s regulations regarding buildings takes

effect. Boverket is the Swedish board of housing, building and planning. Clarifications have

been made concerning moisture issues which facilitate the verifications of moisture security

in the chain of building production. The regulations also contain demands according to

critical levels of moisture in building materials. This study is meant to survey errors in the

production phase and how the production can develop to correspond to the regulations stated

by Boverket regarding moisture safety.

We interviewed different representatives in the building sector to give a general impression

of the moisture issues. Göran Hedenblad at Boverket states that the supervision and control

regarding moisture on the construction site can and must be improved. The moisture

consultant Tord Nilsson believes that the new demands will result in huge changes

concerning the way buildings are produced. The interviews carried out with the future

proprietor and the contractor displayed a lack of knowledge and strategy concerning how to

produce moisture secure structures.

The field study pointed out incongruities concerning how building materials and the

constructions were protected from moisture influence, evaporation and the control of the

moisture levels in the structure. Many of these flaws originate from the fact that moisture

issues are not a central matter, neither in the phase of planning nor production. Further it can

be established that the level of knowledge regarding how to deal with moisture problems can

be developed among all personnel and sectors in the building process.

The observations implemented during the field study have resulted in several preventive

measures which are compiled in this thesis. Further has an information sheet been put

together with the purpose to inform about these preventive measures and the damages

moisture inflicts upon structures and human beings. The information sheet should be placed on the construction site to support the contractors in their work for a more moisture safe

production.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

45

Sklenář, Marek. „Vybrané činnosti ve výstavbě“. Master's thesis, Vysoké učení technické v Brně. Ústav soudního inženýrství, 2012. http://www.nusl.cz/ntk/nusl-232654.

Der volle Inhalt der Quelle

Annotation:

The issue of responsibility will always be actual in all human activities. In the construction industry and real estate engineering, the impact of human activities always have a tangible link, it seems to be the assessment of duties and responsibility of each participant seemingly simple. The opposite is true, however, as construction and real estate business has passed in the last few decades significant development so that some activities in these fields have become for the general public is almost unreadable. And not only the lay the general public, but also experts and professionals in the field are often lost in the complicated process of construction, of the various stages and its connections with individual activities which have result in the effective complex. Construction Law, building regulations and authorization law can not be regarded as something of directive and bureaucracy of the state and its institutions, but it needs to see them particularly in terms of protection when it was, is and will be primarily in the interests of professionals to clearly defined rules and limits of their activities. It is therefore in the interest of authorized persons to best oriented in the regulations so that they help to improve the performance of their profession. For each authorized person working in the construction industry is important to know the extent of its competences, duties and responsibilities. Without knowledge of these principles can not be selected activities done and can not fulfill their purpose and definition - which is certainly a quality building work which meets all requirements with respect to all subjects of its surroundings. The knowledge gained from this work should serve to simplify the view of the complicated system building regulations for obtaining a healthy perspective and eliminating concerns of this difficult structure. Diploma work does not attempt to change regulations, but rather to understand their meaning and purpose, and point out their necessity. It can be said that knowledge of the legal context is a necessary condition for the performance of selected activities in construction. In any architect, designer and site management must have been a piece of "lawyer", when these people will be able to clearly understand the regulations not only in their profession, but also in connection with the other professions. Based on the findings contained in this thesis it is possible to establish for example open discussion, whether or not to introduce more fields in the building educational system, such as the real estate engineering at USI in Brno, whether and how to create the most appropriate implementation of the construction legal system in the curricula of technical faculties, how to create conditions for systematic knowledge of construction law of authorized persons throughout their careers.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

46

Jakobsson, Sara. „Fastighetsindelningsbestämmelser : en implementeringsstudie av bestämmelser i nya PBL“. Thesis, Högskolan Väst, Institutionen för ingenjörsvetenskap, 2012. http://urn.kb.se/resolve?urn=urn:nbn:se:hv:diva-4596.

Der volle Inhalt der Quelle

Annotation:

Med den nya plan- och bygglagen (PBL) som trädde i kraft den 2 maj 2011, blev det möjligtatt redovisa fastighetsindelningsbestämmelser i en detaljplan på motsvarande sätt somgjordes genom fastighetsplan i 1987 års PBL. Den särskilda planformen fastighetsplan togsdärmed bort. Syftet med de nya bestämmelserna var att förenkla tillämpningen.Bestämmelserna möjliggör en mer detaljerad reglering i detaljplan, men medför också enskyldighet att göra en prövning redan i planarbetet enligt lagvillkor som finns utanför PBL.Syftet med detta arbete var att bidra med ny empiri avseende hur och i vilken utsträckningsvenska kommuner har tillämpat bestämmelser om fastighetsindelning i plan- ochbygglagstiftningen, samt vilken betydelse tillämparna haft för implementeringen avfastighetsindelningsbestämmelser i plan- och bygglagstiftningen. Genom att tillämpa ettimplementeringsperspektiv är avsikten att bidra med ett nytt perspektiv på tillämpningen avplan- och bygglagstiftningen.Målsättningen var att genom att undersöka och besvara min frågeställning vidareutveckladenna nyvunna kunskap i form av ett förslag till en metodbeskrivning för tillämpningen avlagstiftningen. Då examensarbetet utförts på Halmstads kommunsSamhällsbyggnadskontor var tanken att slutprodukten ska vara ett användarvänligt redskapför dem vid tillämpande av bestämmelser om fastighetsindelning. Metodbeskrivningenresulterade i ett flödesschema och en checklista.En fallstudiemetod tillämpades där implementering av fastighetsindelningsbestämmelservar det ”fall” som studerades och analysenheten bestod av Sveriges 290 kommuner.Datainsamling har skett genom en webbaserad enkät till landets alla kommuner.Det är endast drygt ett år sedan nya PBL trädde i kraft och det är fortfarande tidigt att dranågra slutsatser kring lagstiftningens genomslag. Mina slutsatser är att kommunerna inteanvänder sig av bestämmelserna i så stor utsträckning. Majoriteten av de bestämmelser sominförs avser fastighetsindelning och gemensamhetsanläggningar. Lantmäteriet spelar ennyckelroll vid tillämpandet av bestämmelserna, det är oftast lantmäteriet som prövar attbestämmelsen är förenlig med villkor i förrättningslagstiftningen. Och i de fåtal fall man tagit fram rutiner har man låtit lantmäteriet utarbeta dem. Tillämparna inverkar på implementeringen av lagstiftningen främst på två vis. För det första genom att tillämparna inte till fullo förstår lagparagraferna som reglerarfastighetsindelningsbestämmelser. Konsekvensen av det är att nödvändig villkorsprövninginte görs eller att kommunerna inte använder sig av fastighetsindelningsbestämmelser överhuvudtaget. För det andra genom att det är oklart vilka tillämparna av lagparagrafenfaktiskt är. Det innebär att implementeringsprocessen på lokal nivå kommer att tolkas iljuset av olika professionella perspektiv, exempelvis arkitekter, fysiska planerare, ingenjöreroch samhällsplanerare med en mängd olika utfall. I viss mån påverkas tillämparna av kulturoch tradition hur man tidigare arbetat med fastighetsplan i kommunen.
With the new Planning and Building Act (PBA), which came into force on 2 May 2011, it became possible to account for provisions on property division in a detailed developmentplan in the same way as was done in a property regulation plan in the former legislation.The property regulation plan then ceased as a separate plan. The purpose of the provisionswas to simplify the process and only have one planning process instead of two. Theprovisions on property division allow for a more detailed regulation of the detaileddevelopment plan, but also means a duty to conduct an investigation already in planningwork according law terms that is outside the PBA.The purpose of this work was to contribute new empirical evidence regarding how and towhat extent the Swedish municipalities have applied the provisions on property division,and the importance the implementing officers at the local authorities had for theimplementation. By applying an implementation perspective, the intention is to provide anew perspective on the application of planning and building act. The aim was to investigate and answer my questions and by that further develop this newfoundknowledge in the form of a proposal for a methodology for implementing thelegislation. Since this thesis work was performed at Halmstad Municipality Planning Office,the idea was that the end product will be a user-friendly tool for them in the application ofthe provisions on property division. Method disclosure resulted in a flow chart and achecklist.A case study method was used where the implementation of the provisions on propertydivision was the “case” that was studied and the analysis consisted of 290 municipalities inSweden. Data was obtained from a web based survey among the country's municipalities.It is only just over a year ago, new PBA entered into force and it is still early to draw anyconclusions about the regulatory impact. My conclusions are that the municipalities do notuse the provisions as much. The majority of the provisions introduced concerns propertydivision and joint facilities. The cadastral authority plays a key role in the application of theprovisions, it is usually the cadastral authority which examines that the provision isconsistent with law terms outside the PBA. And in those few cases they have developedroutines it is prepared by the cadastral authority. The implementing officers at the local authorities affect the implementation mainly in twoways. Firstly, by the users not fully understanding the provisions. The consequence of thisis that necessary testing of conditions is not done or that the municipalities do not applythe provisons at all. Second, in that it is unclear which the users of the legislation actually is. This means that the implementation process at the local level will be interpreted in light ofdifferent professional perspectives, such as architects, physical planners, engineers andplanners with a variety of outcomes. To some extent the users are affected by culture andtradition how the municipality previously worked with real estate plan.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

47

Cedervall, Ofelia, und Tove Wränghede. „Coliving - svenska bostadsmarknadens nya trend : en analys av befintliga coliving-projekt i Stockholmsregionen“. Thesis, KTH, Fastigheter och byggande, 2021. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-297393.

Der volle Inhalt der Quelle

Annotation:

De senaste tio åren har konceptet coliving etablerats på den svenska bostadsmarknaden. På grund av bostadsbristen i storstadsregionerna i Sverige har behovet av nya innovativa boendeformer varit av betydelse. Detta gäller främst unga vuxna i Sverige mellan 20–35 år. Det nya konceptet coliving innebär ett gemensamt boende där hyresgästerna erbjuds både privata och gemensamma ytor. Utvecklingen av coliving grundar sig i andra kollektiva boendeformer, men denna typ av boende inkluderar en bredare målgrupp och mer tjänster samt service. Detta har medfört att coliving är en attraktiv och innovativ bostadsform som företag i Sverige valt att implementera i sina fastigheter. Syftet med arbetet, som är i samarbete med Stena Fastigheter, är att undersöka hur och varför företag i Stockholm väljer att implementera konceptet coliving i sina fastigheter. Författarna har även valt att fördjupa sig inom de olika regler och lagar som finns tillgängliga idag för att undersöka vilka hinder det finns i uppstartsfasen av coliving-projekt. För att kunna uppfylla arbetets syfte har författarna haft semistrukturerade intervjuer med respondenter från olika coliving-aktörer i Stockholm. Det har även utförts en litteraturstudie för att kunna få en fördjupad inblick av konceptet samt regleringen kring det. Idag råder en viss problematik kring regleringen av coliving, detta inkluderar Hyreslagen och Boverkets byggregler, som medför att det inte finns en tydlig struktur av konceptet och hur det ska utformas. I och med detta har företagen utformat sina coliving-enheter på olika sätt. Respondenterna nämner hur efterfrågan och en alternativ lösning till bostadsbristen för unga vuxna är två av drivkrafterna för att utveckla konceptet coliving.
For the past ten years, the concept of coliving has been established in the Swedish housing market. Due to the housing shortage in the metropolitan regions in Sweden, the need for new innovative forms of housing has been important. This mainly applies to young adults in Sweden between the ages of 20-35. The new concept of coliving means a shared accommodation where the tenants are offered both private and common areas. The development of coliving is based on other forms of collective housing, but this type of housing includes a broader target group and more services as well as services. This has meant that coliving is an attractive and innovative form of housing that companies in Sweden have chosen to implement in their properties. The purpose of this master’s thesis, which is in collaboration with Stena Fastigheter, is to investigate how and why companies in Stockholm choose to implement the concept of coliving in their properties. The authors have also chosen to delve into the various rules and laws available today to examine the obstacles that exist in the start-up phase of coliving projects. In order to fulfill the purpose of the work, the authors have had semi-structured interviews with respondents from various coliving actors in Stockholm. A literature study has also been carried out in order to gain an in-depth insight into the concept and the regulations surrounding it. Today, there is a certain problem with the regulation of coliving, this includes Hyreslagen and Boverkets building regulations, which means that there is no clear structure of the concept and how it should be designed. As a result, companies have designed their coliving units in different ways. The respondents mention how demand and an alternative solution to the housing shortage for young adults are two of the driving forces for developing the concept.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

48

Šuška, Milan. „Taktiky pre vidiek, možnosti regulácie: región Kysuce“. Doctoral thesis, Vysoké učení technické v Brně. Fakulta architektury, 2015. http://www.nusl.cz/ntk/nusl-233276.

Der volle Inhalt der Quelle

Annotation:

This thesis defines the values and qualities of rural areas, describes the transformations of architecture and public spaces in the Kysuce region, especially after the year 1989. The development is compared with for¬eign rural regions in Europe. The assignment was to introduce foreign local regulations, verify their influ¬ence on rural areas and modern architecture. The thesis explains the meaning and reasons of architectural and urban planning regulations, verifies the legislative possibilities of their application in Kysuce region and suggests tactics leading to increase of a building culture in the region.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

49

Jörnklev, Sebastian. „Ombyggnad och ändrad användning av en kulturhistorisk värdefull skola från 1850“. Thesis, Luleå tekniska universitet, Arkitektur och vatten, 2019. http://urn.kb.se/resolve?urn=urn:nbn:se:ltu:diva-74557.

Der volle Inhalt der Quelle

Annotation:

Att utnyttja befintliga byggnader som annars står tomma kan vara en del av lösningen på problemet gällande bostadsbrist i Sverige. Vid ändring av äldre bebyggelse som är det viktigt att beakta de kulturhistoriska och arkitektoniska värdena. Vid ombyggnation till bostäder och energieffektivisering är det viktigt att detta genomförs varsamt på äldre värdefull bebyggelse. Syftet med arbetet är att bidra till en ökad förståelse för hur en äldre byggnads arkitektoniska och kulturhistoriska värden kan bevaras trots att det sker en funktionsändring från en verksamhet till en annan. Målet för arbetet är att undersöka hur en gammal skolbyggnad kan ändras till bostäder samtidigt som kulturella och arkitektoniska värden bibehålls, energianvändningen minskar och funktionella bostäder skapas. Arbetet baseras på en fallstudiebyggnad som är en skolbyggnad från 1850 som ligger i Vanstad, Skåne. En inledande litteraturgenomgång behandlar äldre bygg- och installationstekniska lösningar, kulturvärde och kvalitéer i bostäder. Vilka regelverk som skall följas vid ombyggnation och ändrad användning, utformningskrav enligt BBR och energieffektiviseringsåtgärder vid ombyggnation behandlas också. Även fyra exempel gällande energieffektiviseringar av äldre tegelbyggnader studeras. Fallstudiebyggnaden är inte K-märkt men pekas ut som värdefull och värd att bevara i handlingar tillhandahållna av Sjöbo kommun. Generellt så rekommenderas det att byggnader uppförda före 1900-talet skall bevaras i så autentiskt skick som möjligt. Utifrån insamlad information genom inventering av arkivmaterial och inventering av fallstudiebyggnaden tas en beskrivning av fallstudiebyggnaden fram, som ligger till grund för utvecklingen av ett utformningsförslag för ändring av skolbyggnaden till bostadsändamål. Det efterfrågas mindre lägenheter från Sjöbo kommun vilket utformningsförslaget tagit hänsyn till. Utformningsförslaget resulterade i 7 stycken lägenheter där 6 av 7 har en boarea mellan 35 m2 och 55 m2. På grund av byggnadens ålder och äldre byggnadstekniker så når byggnaden inte upp till dagens energikrav. Förslaget till bostadsutformning inkluderar åtgärder som bedöms vara möjliga att genomföra för att sänka energianvändningen. Varje lägenhet granskas också för att kontrollera vilka kvalitéer som uppnås i bostäderna. De åtgärder som förespråkas är: tilläggsisolering av ytterväggar och yttertak, tätning av klimatskal, byte av ventilationssystem, uppvärmningssystem, installation av solceller samt förbättring av fönster och dörrar. Resultatet visar hur det går att utforma funktionella bostäder i en äldre kulturhistoriskt värdefull byggnad. Att tillämpa energieffektiviseringsåtgärder för minskad energianvändning och förbättrat inomhusklimat påvisas också i resultatet. Gällande lönsamheten i genomförandet sett till ombyggnation, ändrad användning, energieffektivisering och lägenhetsutformning kan vidare studier ske mer ingående på den konkreta energibesparingen och LCC-kalkyler för vidare ekonomisk insikt.
To use existing buildings that would otherwise be empty could be a part of the solution regarding the housing shortage in Sweden. When changing older buildings, it is important to consider the cultural and architectural values. When changing usage to dwellings and improving energy efficiency it is important that it is carried out carefully on older valuable buildings. The purpose of the work is to contribute to an increased understanding of how the architectural and cultural-historical values of an older building can be preserved despite a change in use from one function to another. The goal of the work is to examine how a cultural-historical valuable building can be changed to functional dwellings in conjunction with reduced energy usage. The work is based on a case study of a school building from 1850 in Vanstad, Skåne. An introducing review of theory is a bout older building and installation solution, cultural value and qualities in dwellings. Which acquis to follow during reconstruction and change of usage, design requirements according to BBR and actions to reduce energy usage. Four different studies regarding reduction in energy usage on older brick buildings are studied. The case study building is not K-marked but is pointed out as a valuable building that is worth preserving in documents from Sjöbo. It is recommended that buildings constructed before the 1900s should be kept as authentic as possible. Based on information gathered through inventory of archive material and inventory of the case study building a description on the case study building is made which is the basis for a design proposal for changed usage from school building to housing. Sjöbo is requesting smaller apartments which the design proposal considers. The design proposal resulted in 7 apartments where 6 out of 7 has a living space between 35 m2 and 55 m2. Because of the buildings age and older building techniques the building does not reach todays energy requirement. The design proposal documents which actions that is possible to implement to reduce the energy usage. Every apartment is reviewed to control which qualities is achieved in the dwellings. The measures advocated is: additional insulation on walls and roof, sealing of the climate shell, change of ventilations system, heating system, installation of solar cells and improvement of window and doors. The result shows how it is possible to design functional dwellings in an older cultural-historical valuable building. To apply energy efficiency measures to reduce the energy usage and improving the indoor climate is also demonstrated in the result. Regarding profitability considering reconstruction, changed usage, reduction in energy usage and design of dwellings more in-depth studies could be made regarding the actual energy savings and LCC calculations for further economic insight.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

50

Jakobsson, Joakim, und Lucas Johansson. „Energieffektivisering av byggnader med kulturhistoriskt värde“. Thesis, Tekniska Högskolan, Högskolan i Jönköping, JTH, Byggnadsteknik, 2016. http://urn.kb.se/resolve?urn=urn:nbn:se:hj:diva-31431.

Der volle Inhalt der Quelle

Annotation:

Syfte: Syftet med arbetet är att bidra till att fastighetsägare fortsatt ska kunna förvalta, driva och bruka gamla kulturhistoriskt viktiga hus även i framtiden. Metod: De metoder som valts för att uppnå målet är dokumentanalys, litteraturstudier och fallstudie. Resultat: Kulturhistoriskt viktiga byggnader behöver energieffektiviseras för att de ska kunna hållas i bruk och existera. Det går att genomföra energieffektiviserande åtgärder utan att skada byggnadens kulturvärde. Åtgärder som fönsterbyte, tilläggsisolering och byte av ventilationssystem bör väljas beroende på husets karaktär. Tilläggsisolering och fönsterbyte är effektiva åtgärder för att minska energiförbrukningen av gamla kulturhistoriskt viktiga byggnader, men riskerar ofta att förvanska byggnadens karaktär. Ventilationssystemsbyte kan innebära mindre ändringar av byggnaden men är en relativt dyr investering. Konsekvenser: Ändringar i en befintlig byggnad kommer dock alltid att påverka dess konstruktion, men det betyder inte att byggnadens kulturhistoriska värde förvanskas. Begränsningar: Beräkningar kommer endast att utföras för ett referensobjekt, stadsbibliotek i Tidaholm. Det beräknade resultatet kommer vara specifikt för denna byggnad, eftersom resultatet varierar med byggnaders olika egenskaper. Däremot kan lösningarna tillämpas på flera objekt. Det finns flera olika energieffektiviserande åtgärder men i denna rapport utreds tilläggsisolering, fönsterbyte och ventilationsbyte. Nyckelord: Energieffektivisering, kulturhistoriskt viktiga byggnader, värmeväxlare, Boverkets byggregler, ventilation.
Purpose: The purpose of the work is to help municipalities continue to manage, operate and use old historic houses in the future. Method: The methods chosen to achieve the objective is document analysis, literature studies and case study. Findings: Culture heritage buildings needs to get more energy efficient, so they can be kept in use and existence. It is possible to implement energy efficiency measures without damaging the building's cultural value. Measures like window replacement, insulation and replacement of ventilation systems should be selected depending on the character of the house. Insulation and window replacement are effective measures to reduce the energy consumption of old historically important buildings, but often risk distorting the character of the building. Ventilation system replacement can involve minor changes to the building but is a relatively expensive investment. Implications: Changes in an existing building will always affect its construction, but it does not mean that the building's heritage value is distorted. Limitations: Calculations will only be performed for a reference object, library in Tidaholm. The calculated result will be specific for this building, since the outcome varies with buildings and their different characteristics. However, the solutions can be applied to multiple objects. There are several energy efficiency measures, but this report will only involve insulation, window replacement and ventilation changes. Keywords: Energy efficiency, historically important buildings, heat exchanger, building regulations, ventilation.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

Dissertationen zum Thema „Building and planning’s building regulations“

Geben Sie eine Quelle nach APA, MLA, Chicago, Harvard und anderen Zitierweisen an