Einloggen

Thematische Bibliographien / ANSYS software / Zeitschriftenartikel

Um die anderen Arten von Veröffentlichungen zu diesem Thema anzuzeigen, folgen Sie diesem Link: ANSYS software.

Zeitschriftenartikel zum Thema „ANSYS software“

Autor: Grafiati

Veröffentlicht am 4. Juni 2021

Zuletzt aktualisiert am 20. Februar 2023

Geben Sie eine Quelle nach APA, MLA, Chicago, Harvard und anderen Zitierweisen an

Wählen Sie eine Art der Quelle aus:

Machen Sie sich mit Top-50 Zeitschriftenartikel für die Forschung zum Thema "ANSYS software" bekannt.

Neben jedem Werk im Literaturverzeichnis ist die Option "Zur Bibliographie hinzufügen" verfügbar. Nutzen Sie sie, wird Ihre bibliographische Angabe des gewählten Werkes nach der nötigen Zitierweise (APA, MLA, Harvard, Chicago, Vancouver usw.) automatisch gestaltet.

Sie können auch den vollen Text der wissenschaftlichen Publikation im PDF-Format herunterladen und eine Online-Annotation der Arbeit lesen, wenn die relevanten Parameter in den Metadaten verfügbar sind.

Sehen Sie die Zeitschriftenartikel für verschiedene Spezialgebieten durch und erstellen Sie Ihre Bibliographie auf korrekte Weise.

1

Li, Yu Guang, und Guo Qing Zhang. „The Dynamic Simulation Study of WN Gear Pair after Coupling Tribology“. Applied Mechanics and Materials 577 (Juli 2014): 214–17. http://dx.doi.org/10.4028/www.scientific.net/amm.577.214.

Der volle Inhalt der Quelle

Annotation:

Based on WN gear characteristics and considering system error, a multi-degree-freedom (Tangential-Radial-Axial) dynamics analysis model after coupling friction was established. In this article, we established the three-dimensional solid model by using PROE and then imported WN gear’ three-dimensional model into Ansys software through the data interface of Ansys software and PROE software and conducted a three-dimensional simulation anasys of the impact of dynamic contact. By applying load, the stress analysis of WN gear was conducted and the WN gear’s the effective stress clouds was gotten. Meanwhile, basing on ANSYS / LS-DYNA, it established the rigid-flexible body of gear dynamic contact model and analyzed the dynamic simulation anasys of WN gear. The results demonstrated that the tangential and axial vibration of double arc gear was significantly greater than the radial vibration.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

2

Wang, Li Xin, Wen Ge Qiu, Qiu Chao Deng und Zhi Hua Yan. „To Use ANSYS Software with Programming Ideas“. Advanced Materials Research 433-440 (Januar 2012): 4316–19. http://dx.doi.org/10.4028/www.scientific.net/amr.433-440.4316.

Der volle Inhalt der Quelle

Annotation:

In this paper, the viewpoint, which to use ANSYS software with programming ideas whatever the beginner, medium and advanced users, is put forward. This style of using ANSYS can make full use of ANSYS powerful functionality. There are many advantages, especially in modifying and deleting commands during an analysis, archiving and transferring your analysis documents, protecting your modeling and simulation intellectual property right, concurrent design and analysis, etc

APA, Harvard, Vancouver, ISO und andere Zitierweisen

3

Wang, Zhi Ming, Yu Chao Wang und Dong Mei Tang. „Method Study on Digital-Model Conversion of Magnetic Worm from CAD Software to ANSYS Software“. Advanced Materials Research 443-444 (Januar 2012): 252–57. http://dx.doi.org/10.4028/www.scientific.net/amr.443-444.252.

Der volle Inhalt der Quelle

Annotation:

In order to solve the model element-missing problem of magnetic worm during the transmission process from Pro/Engineer software to ANSYS software, the paper proposes a novel transmission method. Tooth surface point-data file is established by the MATLAB software. Then the tooth surface curve is generated by the Pro/Engineer software according to the point-data file. The curve is imported into ANSYS software to set up the finite element analysis model. Finally grids are divided by the ANSYS software. After a series of programming and related works, the finite element model of the worm is established in ANSYS software and it indicates that this method is practical and effective and successfully resolved the model element-missing problem of magnetic worm during the transmission process from Pro/Engineer software to ANSYS software.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

4

Jaskot, Anna. „STEEL CANTILEVER BEAM OPTIMIZATION WITH ANSYS SOFTWARE“. Zeszyty Naukowe Politechniki Częstochowskiej. Budownictwo 177, Nr. 27 (Dezember 2021): 69–75. http://dx.doi.org/10.17512/znb.2021.1.11.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

5

Buzalo, N. A., A. S. Alexeeva und B. A. Chernykhovsky. „Modelling framework joints in ANSYS software complex“. IOP Conference Series: Materials Science and Engineering 687 (10.12.2019): 033036. http://dx.doi.org/10.1088/1757-899x/687/3/033036.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

6

Pandey, K. M., und Amrit Sarkar. „Structural Analysis of Nuclear Fuel Element with Ansys Software“. International Journal of Engineering and Technology 3, Nr. 2 (2011): 187–92. http://dx.doi.org/10.7763/ijet.2011.v3.222.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

7

Lv, Ling Wei. „Thermal Analysis Module of ANSYS“. Advanced Materials Research 1030-1032 (September 2014): 653–56. http://dx.doi.org/10.4028/www.scientific.net/amr.1030-1032.653.

Der volle Inhalt der Quelle

Annotation:

Briefly introduced ANSYS software in this paper,especially its powerful function as a kind of finite element analysis software in terms of thermal analysis. Describes the basic principle of ANSYS thermal analysis、analysis steps and method of data pretreatment and post-treatment, discussed the application of ansys and problems needing attention. in thermal analysis

APA, Harvard, Vancouver, ISO und andere Zitierweisen

8

Zhao, Wei Tao, Feng Guo und Xiao Li. „Reliability Analysis of Composite Structure Using ANSYS Software“. Advanced Materials Research 945-949 (Juni 2014): 1155–58. http://dx.doi.org/10.4028/www.scientific.net/amr.945-949.1155.

Der volle Inhalt der Quelle

Annotation:

ANSYS software has provided complete and accurate solutions for composite laminate analysis and provided a set of special elements for different composite structures such as laminated plates, beams, solid structures and stiffeners. Fiber composite materials have been widely used to critical components of aircrafts, automobiles, mechanical, and marine structures. Since uncertainties associated with geometric tolerances, material properties, and boundary conditions widely exist in practical engineering problems. The probability approach is the most popular way to quantify uncertain parameters and perform the reliability analysis. The paper researches on the reliability analysis of the composite panels using ANSYS software. The numerical example is given, it is shown that the response surface method (RSM) can reduce the computational efforts comparing with Monte Carlo simulation (MCS).

APA, Harvard, Vancouver, ISO und andere Zitierweisen

9

Marchuk, N. I., S. V. Deordiev und E. V. Prasolenko. „Optimal design solutions for structures using ANSYS software“. IOP Conference Series: Materials Science and Engineering 456 (31.12.2018): 012022. http://dx.doi.org/10.1088/1757-899x/456/1/012022.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

10

Shalamov, P. V., I. A. Kulygina und E. N. Yaroslavova. „ANSYS Software-based Study of Thermal Drilling Process“. Procedia Engineering 150 (2016): 746–52. http://dx.doi.org/10.1016/j.proeng.2016.07.098.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

11

Chemezov, Denis Alexandrovich. „DESCRIPTION OF LIBRARY MATERIALS SOFTWARE PACKAGE ANSYS AUTODYN“. Theoretical & Applied Science 16, Nr. 08 (30.08.2014): 4–23. http://dx.doi.org/10.15863/tas.2014.08.16.2.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

12

Kuznetsov, I. A., A. N. Gribanov, A. A. Kurushin, G. F. Moseychuk und A. I. Sinani. „Electrodynamic computations using ANSYS Electronics Desktop software controlled by a program developed in the MATLAB environment“. Journal of «Almaz – Antey» Air and Space Defence Corporation, Nr. 3 (30.09.2019): 13–18. http://dx.doi.org/10.38013/2542-0542-2019-3-13-18.

Der volle Inhalt der Quelle

Annotation:

The paper considers methods of controlling the process of electrodynamic structure simulation in the ANSYS Electronics Desktop software (previously known as ANSYS HFSS). The MATLAB software was leading the computation. In order to transmit data to the ANSYS Electronics Desktop software we employed the Microsoft Component Object Model technology, which makes it possible to combine software components into executables. We used simulation of a planar aperture phased antenna array to show the possibilities and limitations in controlling the ANSYS HFSS software subsequently outputting data to a text file and importing the latter into MATLAB for further computation. We present simulation results for a phased antenna array generated by the ANSYS Electronics Desktop software according to the array model compiled in MATLAB

APA, Harvard, Vancouver, ISO und andere Zitierweisen

13

Zhou, Bo, Jun Lv und Dong Xue Wang. „Numerical Analysis on Stress Field near Crack-Tip of Mode I in Shape Memory Alloy“. Applied Mechanics and Materials 357-360 (August 2013): 1437–40. http://dx.doi.org/10.4028/www.scientific.net/amm.357-360.1437.

Der volle Inhalt der Quelle

Annotation:

The methods to define the material parameters related to the super-elasticity of shape memory alloy in the software of ANSYS are introduced. The mechanical behaviors with super-elasticity occurring in the shape memory alloy are numerically simulated by the software ANSYS. The stress field near crack-tip of mode I in the material of shape memory alloy with super-elasticity are numerically simulated by the software ANSYS. Results of numerical simulation show that the software ANSYS is able to simulate the fracture behaviors occurring in the shape memory alloy structures effectively.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

14

Zhang, Xin Zhong, Lei Lei Liu und Ke Dong Tang. „Nonlinear Analysis of Reinforced Concrete Beam by ANSYS“. Applied Mechanics and Materials 438-439 (Oktober 2013): 663–66. http://dx.doi.org/10.4028/www.scientific.net/amm.438-439.663.

Der volle Inhalt der Quelle

Annotation:

This paper mainly uses ANSYS, the finite element analysis software, to make nonlinear analysis of reinforced concrete beam. The model simulating the test process was established, the calculation results of ANSYS are compared with the experimental results. The comparison shows that ANSYS analysis results are similar to experimental results, which indicates ANSYS analysis software can be used to simulate the mechanical property of reinforced concrete structures.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

15

Zhiltsov, Yuriy, und Viktor Elshin. „ANSYS CFX SOFTWARE APPLICATION FOR PULVERIZED COAL BURNER SIMULATION“. Proceedings of Irkutsk State Technical University 21, Nr. 4 (April 2017): 75–80. http://dx.doi.org/10.21285/1814-3520-2017-4-75-80.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

16

Kukreja, Nitin, und Piyush Singhal. „Design and verify a natural frequency using ANSYS software“. Materials Today: Proceedings 45 (2021): 3255–58. http://dx.doi.org/10.1016/j.matpr.2020.12.386.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

17

Godara, S. S., Vinayak Brenia, Amit Kumar Soni, Rupender Singh Shekhawat und K. K. Saxena. „Design & analysis of connecting rod using ANSYS software“. Materials Today: Proceedings 56 (2022): 1896–903. http://dx.doi.org/10.1016/j.matpr.2021.11.166.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

18

Ovsepian, E. E., E. L. Leusheva und V. A. Morenov. „Drilling mud upward velocity modelling in Ansys CFX software“. IOP Conference Series: Earth and Environmental Science 931, Nr. 1 (01.12.2021): 012020. http://dx.doi.org/10.1088/1755-1315/931/1/012020.

Der volle Inhalt der Quelle

Annotation:

Abstract Drilling mud has various functions, one of which is to carry cuttings to the surface. All other things being equal, the removal of cuttings is characterized by the upward velocity. This paper simulates the rheology of polymer-glycolic non-dispersing mud (in particular viscosity) to achieve the required upward velocity in the «Ansys CFX» software. The viscosity of the mud varies from 6 to 12 mPa·s, on production casing drilling in Arctic conditions. The results of the study showed that for such conditions, the viscosity should be in the range from 6 to 8 mPa·s.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

19

Surendra, Bathala, und D. Vinod. „Finite Element Analysis of Composite Laminate by ANSYS Software“. Journal of Physics: Conference Series 1964, Nr. 6 (01.07.2021): 062097. http://dx.doi.org/10.1088/1742-6596/1964/6/062097.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

20

Ahiwale, Dhiraj, Harshada Madake, Nikita Phadtare, Amit Jarande und Deepak Jambhale. „Modal analysis of cracked cantilever beam using ANSYS software“. Materials Today: Proceedings 56 (2022): 165–70. http://dx.doi.org/10.1016/j.matpr.2022.01.055.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

21

Brestovič, Tomáš, und Natália Jasminská. „SOFTWARE SUPPORT DEVELOPMENT FOR NUMERICAL SOLUTION OF ANSYS CFX“. Acta Mechanica et Automatica 7, Nr. 4 (01.12.2013): 215–21. http://dx.doi.org/10.2478/ama-2013-0036.

Der volle Inhalt der Quelle

Annotation:

Abstract The paper deals with possibilities to apply a new developed software support for simulation programme ANSYS CFX. A direct export of heat-transfer coefficients into variables used under edge conditions as well as of physical properties of gas mixtures into material properties during simulation solution of technical tasks means a significant saving of time. The paper summarizes in detail description of the software for calculation of heat-transfer coefficient during free convection (HTC-FC) and of material properties of gas mixture (MPGM) that enable to export calculated data directly into the text files which can be imported then into the programme ANSYS CFX.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

22

Yuan, Qing Ke, Ya Nan Du, Yao Ding und Tong Le Wang. „Modal Analysis of Ball Screw Based on ANSYS Software“. Advanced Materials Research 314-316 (August 2011): 1981–86. http://dx.doi.org/10.4028/www.scientific.net/amr.314-316.1981.

Der volle Inhalt der Quelle

Annotation:

Ball screw is an important part in the machine tool feeding system. This paper researches on the ball screw, establishes the 3D virtual numerical model by Pro/engineer. Modal analysis of ball screw is carried out in three different cases by ANSYS, then gets the intrinsic frequency and vibration model of ball screw. It provides reliable reference for further structure analysis of ball screw.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

23

Sergeev, S. V., D. V. Proshunin und Yu S. Sergeev. „Calculation of errors in hole machining by ansys software“. Russian Engineering Research 32, Nr. 5-6 (Mai 2012): 515–18. http://dx.doi.org/10.3103/s1068798x1205022x.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

24

Dahmani, L., A. Khennane und S. Kaci. „Crack identification in reinforced concrete beams using ANSYS software“. Strength of Materials 42, Nr. 2 (März 2010): 232–40. http://dx.doi.org/10.1007/s11223-010-9212-6.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

25

Zhang, Guo Hua, Shi Xuan Liu und Yong Qi. „The Application of ANSYS to Ultrasonic Cleaner Design“. Applied Mechanics and Materials 441 (Dezember 2013): 518–21. http://dx.doi.org/10.4028/www.scientific.net/amm.441.518.

Der volle Inhalt der Quelle

Annotation:

With the development of modern mechanics methods and computer technology, some practical commercial finite element analysis software was introduced to the ultrasonic cleaner design. ANSYS software is a financial structure, fluid, electric field, magnetic field, the sound field analysis in one large general-purpose finite element analysis software can be used in many industrial fields. The basic operation of ANSYS was introduced. The simulation based on the ANSYS was applied in the design of ultrasonic cleaner successfully, which can improve work efficiency and shorten development period of ultrasonic cleaner.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

26

Wang, Yan Xia, und Hui Gao. „Optimization Design of Piston Head on ANSYS“. Advanced Materials Research 199-200 (Februar 2011): 1196–99. http://dx.doi.org/10.4028/www.scientific.net/amr.199-200.1196.

Der volle Inhalt der Quelle

Annotation:

Based on the axially symmetric of piston head, the 2D parametric model of piston head is established using the ANSYS software. The optimized design program is written by APDL language and the optimization is carried out using the ANSYS software, which provides a better reference for reliability and life of engine.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

27

Liu, Cheng Lin, Ze Sun, Yun Zhao, Xing Fu Song, Gui Min Lu und Jian Guo Yu. „Different Finite Element Software on Electric Field Analysis of Magnesium Electrolysis Cell“. Advanced Materials Research 291-294 (Juli 2011): 2352–55. http://dx.doi.org/10.4028/www.scientific.net/amr.291-294.2352.

Der volle Inhalt der Quelle

Annotation:

The electric field distribution was the main factor affecting on the current efficiency of electrolysis cell. So, the electric field distribution of magnesium electrolysis cell was studied to improve the current efficiency by two of main finite element softwares, COMSOL and ANSYS. The electric field distribution and its trends with the electrolyte change from 1.25m to 1.40m were calculated by using the two softwares. Form the results, the characteristics of COMSOL and ANSYS can be obtained. The conclusions of the paper will provided a significant reference for choose the appropriate software in practice process.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

28

Ren, Bai Cheng. „Surrounding Rock Rupture Modeling of Tunnel Based on ANSYS“. Applied Mechanics and Materials 490-491 (Januar 2014): 863–66. http://dx.doi.org/10.4028/www.scientific.net/amm.490-491.863.

Der volle Inhalt der Quelle

Annotation:

This article is based on the real condition of a tunnel. By using displacement and stress contours get from finite element analysis software ANSYS, the simulation of the tunnel excavation is modeled and the regulation of overlying rock’s displacement and stress is deducted during the evacuation of the tunnel. The analysis result to overlying rock mass’ rupture regularity can be helpful for the control of surrounding rock’s stability and the improvement of supporting system. The result shows finite element analysis software ANASYS can be used to guide tunnel constructions during the evacuation.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

29

Paulech, Juraj, Gabriel Gálik, Vladimír Kutiš und Justín Murín. „Software for Model Preparation of Transmission Lattice Construction“. Strojnícky časopis - Journal of Mechanical Engineering 69, Nr. 3 (01.11.2019): 89–94. http://dx.doi.org/10.2478/scjme-2019-0034.

Der volle Inhalt der Quelle

Annotation:

AbstractThis paper presents the preparation phase for model of transmission tower lattice construction using ANSYS APDL environment. Beam elements are used for the model which introduce complications in the preparation phase because of the need to define the beam shape. Considering that the lattice construction of the transmission tower consists of hundreds of trusses it is obvious that some auxiliary tool is necessary for preparation of such model in ANSYS APDL. This tool was programmed in SW Wolfram Mathematica.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

30

Li, Teng, Le Mu, Xian Da Wang, Bo Feng und Zi Yi Jin. „Contact Stress Analysis of Packer Rubber Based on ANSYS Software“. Advanced Materials Research 860-863 (Dezember 2013): 2966–69. http://dx.doi.org/10.4028/www.scientific.net/amr.860-863.2966.

Der volle Inhalt der Quelle

Annotation:

In this paper three-rubber compression packers are regard as study objects, hyper-elastic constitution equation Yeoh has been used, the ANSYS mechanical model of packer rubber has been established by ANSYS software, the influence of axial setting force and frictional coefficient on the contact stress of packer rubber has been analyzed. The research results indicate that with the increasing of setting force, the axial compression amount and Von Mises stress increase; with the increasing of frictional coefficient between rubber and casing, the Von Mises stress of the intermediate rubber decreases slowly.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

31

Zhiltsov, Yuri V., und Viktor V. Elshin. „USE OF ANSYS CFX SOFTWARE FOR COMBINED BOILER MODEL DEVELOPMENT“. Proceedings of Irkutsk State Technical University 21, Nr. 3 (März 2017): 81–90. http://dx.doi.org/10.21285/1814-3520-2017-3-81-90.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

32

Cheng, Li Juan, und Xin Chi Yan. „Compare SM Solver, ANSYS Soft Ware to Analyze Structural Internal Force Bars“. Applied Mechanics and Materials 590 (Juni 2014): 732–35. http://dx.doi.org/10.4028/www.scientific.net/amm.590.732.

Der volle Inhalt der Quelle

Annotation:

In order to compare the accuracy of SM Solver, ANSYS software to analyze structural internal force bars,we use SM Solver and ANSYS software modeling steel frame door respectively, and comparing the situation of internal forces of the same type frame for error analysis. The results show that SM Solver and ANSYS software have small error in shear analysis, but the gap is relatively large in moment analysis, and the error is reduced with the increase in the number of dividing cells.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

33

Pelevin, Aleksander, und Vladimir Shadrin. „Features of using the viscoelastic material model in the ANSYS software package“. Вестник Пермского университета. Математика. Механика. Информатика, Nr. 3(54) (2021): 52–57. http://dx.doi.org/10.17072/1993-0550-2021-3-52-57.

Der volle Inhalt der Quelle

Annotation:

The paper presents an experiment on uniaxial cyclic stretching with increasing amplitude of a filled elastomeric material. Such materials have complex mechanisms of mechanical behavior, in addition to elasticity, there are viscoelasticity and the Mullins softening effect. According to the experimental data, a mathematical model of a viscoelastic material with a softening effect is constructed in the ANSYS software package. It is shown that the combined use of the Ogden hyperelastic model, the Ogden–Roxburgh softening model, and the Prony viscoelastic model in the ANSYS software package accurately describes the mechanical behavior of the material for a multiplicity of elongation 2.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

34

BOJKO, MARIAN, LUKAS HERTL und SYLVA DRABKOVA. „METHODS OF CFD MODELLING OF TWIN-SCREW PUMPS FOR NON-NEWTONIAN MATERIALS“. MM Science Journal 2021, Nr. 6 (15.12.2021): 5366–72. http://dx.doi.org/10.17973/mmsj.2021_12_2021103.

Der volle Inhalt der Quelle

Annotation:

The twin-screw pump is designed for pumping highly viscous materials in the food industry. Rheological characteristics of materials are important in the specification of design parameters of screw pumps. Analysis of flow in the twin-screw pumps with definition of non-newtonian materials can be made by numerical modelling. CFD generally oriented software ANSYS Fluent and ANSYS Polyflow has been used for modelling. In this study those software’s (ANSYS Fluent and ANSYS Polyflow) were defined for solution of flow in the twin-screw pumps. Results were compared for the same boundary conditions on the inlet and outlet of the 3D model. For definition of the viscosity were used the Nonnewtonian power law. Parameters as consistency coefficient and flow exponent for Nonnewtonian power law were analysed by software ANSYS Fluent and ANSYS Polyflow. Postprocessing form ANSYS Fluent and ANSYS Polyflow were made by contours of field and by graphs.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

35

Tao, Yang, Zhi Hu Li, Shao Fei Wang, Jing Jing Fan, Wen Wu Zou und Yong Huang. „Based on ANSYS Design Optimization of Vehicle's Tailgate“. Applied Mechanics and Materials 152-154 (Januar 2012): 709–13. http://dx.doi.org/10.4028/www.scientific.net/amm.152-154.709.

Der volle Inhalt der Quelle

Annotation:

Increased the machinery of spring and baffle to prevent goods falling bodies ,in order to ensure the safety of persons and goods when loading and unloading. Using UG software for designing automotive Vehicle Tailboards structure of solid modeling, using ANSYS software for mechanical analysising the floating beam, which is the important structural parts of automotive Vehicle’s Tailboards. Analysis the floating beam in different thicknesses and loads of stress, To determined the optimal combination about thickness and load of the floating beam. Above all, The main components of mechanical analysis cannot product the Vehicle’s Tailboards by ANSYS software,Which saving costs on the design and manufacture of production, shorten production cycle and improved the market competitiveness of the product.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

36

Yang, Xiao Yu. „Tube Hydroforming Analysis Based on Ansys“. Applied Mechanics and Materials 232 (November 2012): 537–40. http://dx.doi.org/10.4028/www.scientific.net/amm.232.537.

Der volle Inhalt der Quelle

Annotation:

This paper briefly introduces some problems of tube hydroforming process, at the same time, also uses Ansys software to simulate in tube hydroforming process. And draw an conclusion，To avoid defects in tube hydroforming process, the applied internal pressure must be high enough to suppress buckling but not too high to cause bursting.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

37

Zhai, Wei Wei, Yu Zhang, Xiao Long Lin, Li Chun Wu, Jia Quan Zhang, Yi Wen Xu und Tie Qiang Zhang. „The Emulation Design of Hall Component Based on ANSYS Software“. Advanced Materials Research 482-484 (Februar 2012): 1929–32. http://dx.doi.org/10.4028/www.scientific.net/amr.482-484.1929.

Der volle Inhalt der Quelle

Annotation:

This essay describes the design methodology of Hall component based on ANSYS soft emulation, and analyses the key parameters of Hall component affecting its performance in the design process. The ANSYS software emulation results shows that Hall voltage will be affected by the Hall components with different length to width ratio and the plus electrode in different length and width. The length to width ratio of 1.5 to 2 will get better results, and it proves that the width of the electrode should be less than one-tenth the size of length. The Hall voltage within a certain range will increase with increasing length of Hall components plus electrode. So it is important to choose the best size ratio when designing the Hall components.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

38

Wang, Bo, Yong Zhang und Rong Jun Chen. „Several Realizations of the Finite Element Software ANSYS Structural Analysis“. Applied Mechanics and Materials 442 (Oktober 2013): 507–10. http://dx.doi.org/10.4028/www.scientific.net/amm.442.507.

Der volle Inhalt der Quelle

Annotation:

Based on the normal work and study practice, the author sums up some experience that need to pay attention to some problems in the Ansys finite element analysis. In structural static analysis, the principle of the stress singularity and different load are needed to apply. And in analyzing the nonlinear structure, the problems of convergence are needed to pay special attention.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

39

Yan, Yong Gang, Yan Qin Li und Zhan Kui Wang. „Optimization Design of Coordinate Measuring Machine Based on ANSYS Software“. Applied Mechanics and Materials 42 (November 2010): 453–56. http://dx.doi.org/10.4028/www.scientific.net/amm.42.453.

Der volle Inhalt der Quelle

Annotation:

Coordinate measuring machine (CMM) is a large-scale geometrical detecting instrument. It is of high accuracy, high efficiency simple operation and automation. So, it can ensure the product quality for modern mechanical manufacture industry, and is widely used in the industry such as aircraft, automobile, military and national defense. However, it does not meet gradually the requirement of modern industry because of its measuring accuracy. How to monitor geometrical error rapidly and high accurately is a key research project. To solve the problem, some studies have been carried out. In this paper, a coordinate measuring machine was firstly designed by modern design method. Three dimensional model is built using PRO/E software. And some key components were optimized by using finite element analysis method. The simulating results show that the size and structure of the designed coordinate measuring machines are optimized and improved relate to previous CMM. This study will play an important instructing role for us in studying a novel CMM.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

40

Venkatesh, K. „Improvement in Life of Forging Die by Using Ansys Software“. International Journal for Research in Applied Science and Engineering Technology V, Nr. IX (30.09.2017): 571–80. http://dx.doi.org/10.22214/ijraset.2017.9084.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

41

Koch, Henrique Cardoso, und Bruna Manica Lazzari. „FINITE ELEMENT ANALYSIS OF REINFORCED CONCRETE BEAMS THROUGH ANSYS SOFTWARE“. Journal of Engineering Research 2, Nr. 10 (24.06.2022): 2–46. http://dx.doi.org/10.22533/at.ed.3172102220061.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

42

Azziz, H. N., E. Q. Hussein und M. A. Abdulhameed. „Analysis of fluid flow states in viscometers in ansys software“. IOP Conference Series: Materials Science and Engineering 1067, Nr. 1 (01.02.2021): 012091. http://dx.doi.org/10.1088/1757-899x/1067/1/012091.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

43

Hussain, Mohd Arif. „Structural Analysis of Chassis Frame Using CFRP and ANSYS Software“. International Journal for Research in Applied Science and Engineering Technology 9, Nr. 8 (31.08.2021): 2689–96. http://dx.doi.org/10.22214/ijraset.2021.37850.

Der volle Inhalt der Quelle

Annotation:

Abstract: Automotive chassis is an important part of an automobile. The chassis serves as a frame work for supporting the body and different parts of the automobile. The chassis frame has to withstand the stresses developed within a limit. Along with strength, an important consideration in chassis design is to have adequate bending stiffness for better handling characteristics. So, strength and stiffness are two important criteria for the design of the chassis. This work is aimed at work performed towards the static structural analysis of the automobile chassis in which study of the stresses developed and deformation of chassis frame of a truck has been done . The chassis is modelled in SolidWorks and finite element analysis has been done in ANSYS. a comparison of current conventional steel chassis structural Steel and Aluminum and CFRP chassis in terms of deflection and stresses must be made in order to select the best one. A discussion and analysis is also done which gives insight on various effects of unidirectional fiber orientations in the chassis on strength and stiffness. Keyword: ANSYS, SolidWorks, chassis, strength, stiffness, structural analysis.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

44

Králik, Juraj, und Juraj JR Králik. „Methodology of Teaching Methods of FEM Analysis Using Software ANSYS“. International Journal of Education and Information Technologies 16 (04.01.2022): 12–28. http://dx.doi.org/10.46300/9109.2022.16.2.

Der volle Inhalt der Quelle

Annotation:

This paper presents the authors' experience of teaching the finite element method (FEM) at university. With the development of computational tools in the second half of the twentieth century, there was also the development of computational methods focused on the algorithmization of engineering tasks based on FEM. From the solution of individual problems of the state of stress and deformation from the influence of the external environment, a complex solution of the mutual interaction of the system of deformable bodies (elements) has been performed while improving the physical and geometric characteristics of modern materials and structures. Many processes in the automatic design system take place as if in a "black box" and the process of verifying the achieved results becomes the most important stage in the design activity. Without knowledge of the theoretical basis of FEM, physical and mathematical modeling, verification procedures and methods, the design of a structure cannot be safe and reliable. In this paper we present one of the possibilities how the student can get acquainted with the theoretical foundations of FEM and with computational procedures using ANSYS software.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

45

王, 东海. „Numerical Simulation of SHPB Experimental Process Based on ANSYS Software“. International Journal of Mechanics Research 08, Nr. 01 (2019): 39–46. http://dx.doi.org/10.12677/ijm.2019.81005.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

46

Zahariea, D. „Numerical analysis of eccentric orifice plate using ANSYS Fluent software“. IOP Conference Series: Materials Science and Engineering 161 (November 2016): 012041. http://dx.doi.org/10.1088/1757-899x/161/1/012041.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

47

Frătiţa, M., K. Uzuneanu, F. Popescu und I. V. Ion. „The analysis of the thermal barrier coating using Ansys software“. IOP Conference Series: Materials Science and Engineering 997 (25.12.2020): 012143. http://dx.doi.org/10.1088/1757-899x/997/1/012143.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

48

Yagnyatinskiy, D. A., und V. N. Fedoseyev. „Numerical Simulations of a Monomorph Deformable Mirror in ANSYS Software“. Atmospheric and Oceanic Optics 33, Nr. 4 (Juli 2020): 372–78. http://dx.doi.org/10.1134/s1024856020040193.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

49

Zhang, Guo Jun, Yong Bin Jia und Xi Lin Lu. „Cracking Simulative Analysis of Reinforced Concrete Columns with ANSYS Software“. Applied Mechanics and Materials 578-579 (Juli 2014): 946–49. http://dx.doi.org/10.4028/www.scientific.net/amm.578-579.946.

Der volle Inhalt der Quelle

Annotation:

The principle and processof finite element model of ANSYS software for RC frame column was introduced firstly,and then the cracking and development rules of RC columns under monotonic load were analyzed with ANSYSsoftware. The results show that: with the stirrup ratios increasing, the short columnwith rectangle hoop, rectangle cross brace hoop and tic tac toe stirrups appearsuccessively few inclined cracks and more vertical cracks; with the axialcompression ratio increasing, more length of horizontal cracks extend to naturalaxis, more vertical cracks appear and appeared cracks are higher along thecolumn height direction for middle length HSC frame columns; the length of OSCframe columns is not so long than that of HSC frame columns, and the crack distributionis dense and crack forms mesh, which show better ductility.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

50

Sherov, K. T., M. R. Sikhimbayev, A. K. Sherov, B. S. Donenbayev, A. K. Rakishev, A. B. Mazdubai, M. M. Musayev und A. M. Abeuova. „Mathematical Modeling of Thermofrictional Milling Process Using ANSYS WB Software“. Journal of Theoretical and Applied Mechanics 47, Nr. 2 (27.06.2017): 24–33. http://dx.doi.org/10.1515/jtam-2017-0008.

Der volle Inhalt der Quelle

Annotation:

Abstract This article presents ANSYS WB-based mathematical modelling of the thermofrictional milling process, which allowed studying the dynamics of thermal and physical processes occurring during the processing. The technique used also allows determination of the optimal cutting conditions of thermofrictional milling for processing various materials, in particular steel 40CN2MA, 30CGSA, 45, 3sp. In our study, from among a number of existing models of cutting fracture, we chose the criterion first proposed by prof. V. L. Kolmogorov. In order to increase the calculations performance, a mathematical model was proposed, that used only two objects: a parallelepiped-shaped workpiece and a cutting insert in the form of a pentagonal prism. In addition, the work takes into account the friction coefficient between a cutting insert and a workpiece taken equal to 0.4 mm. To determine the temperature in the subcontact layer of the workpiece, we introduced the coordinates of nine characteristic points with the same interval in the local coordinate system. As a result, the temperature values were obtained for different materials at the studied points during the cutter speed change. The research results showed the possibility of controlling thermal processes during processing by choosing the optimum cutting modes.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

Wir bieten Rabatte auf alle Premium-Pläne für Autoren, deren Werke in thematische Literatursammlungen aufgenommen wurden. Kontaktieren Sie uns, um einen einzigartigen Promo-Code zu erhalten!