Auswahl der wissenschaftlichen Literatur zum Thema „5GDHC“

Abstract. In order to reduce greenhouse gas emissions and decrease dependency on depleting fossil fuel resources the shift to a renewable energy system is necessary. District heating and cooling systems are a viable solution to provide heat and cold in urban environments. Renewable heat and cold sources that may get incorporated in future urban energy systems will not provide the same high temperature output as current fossil fuel fired systems. Fifth generation district heating and cooling (5GDHC) systems are decentralized, bi-directional, close to ground temperature networks that use direct exchange of warm and cold return flows and thermal storage to balance thermal demand as much as possible. 5GDHC offers a way to incorporate low temperature renewable heat sources including shallow geothermal energy, as well as reduce total demand by recuperating generated heat from cooling and generated cold from heating. The large scale of 5GDHC allows for optimal design of technical parts like heat pumps and thermal storage vessels, while increasing overall system efficiency by incorporating a large variety of supply and demand profiles. We provide a definition for 5GDHC and show how this concept differs from conventional district heating systems. The Mijnwater system in Heerlen, the Netherlands is showing what a city-level 5GDHC system can look like.

District heating and cooling (DHC) is considered one of the most sustainable technologies to meet the heating and cooling demands of buildings in urban areas. The fifth-generation district heating and cooling (5GDHC) concept, often referred to as ambient loops, is a novel solution emerging in Europe and has become a widely discussed topic in current energy system research. 5GDHC systems operate at a temperature close to the ground and include electrically driven heat pumps and associated thermal energy storage in a building-sited energy transfer station (ETS) to satisfy user comfort. This work presents new strategies for improving the operation of these energy transfer stations by means of a model predictive control (MPC) method based on recurrent artificial neural networks. The results show that, under simple time-of-use utility rates, the advanced controller outperforms a rule-based controller for smart charging of the domestic hot water (DHW) thermal energy storage under specific boundary conditions. By exploiting the available thermal energy storage capacity, the MPC controller is capable of shifting up to 14% of the electricity consumption of the ETS from on-peak to off-peak hours. Therefore, the advanced control implemented in 5GDHC networks promotes coupling between the thermal and the electric sector, producing flexibility on the electric grid.

Low temperature district heating and cooling networks (5GDHC) in combination with very shallow geothermal energy potentials enable the complete renewable heating and cooling supply of settlements up to entire city districts. With the help of 5GDHC, heating and cooling can be distributed at a low temperature level with almost no distribution losses and made useable to consumers via decentralized heat pumps (HP). Numerous renewable heat sources, from wastewater heat exchangers and low-temperature industrial waste heat to borehole heat exchangers and large-scale geothermal collector systems (LSC), can be used for these networks. The use of large-scale geothermal collector systems also offers the opportunity to shift heating and cooling loads seasonally, contributing to flexibility in the heating network. In addition, the soil can be cooled below freezing point due to the strong regeneration caused by the solar irradiation. Multilayer geothermal collector systems can be used to deliberately generate excessive cooling of individual areas in order to provide cooling energy for residential buildings, office complexes or industrial applications. Planning these systems requires expertise and understanding regarding the interaction of these technologies in the overall system. This paper provides a summary of experience in planning 5GDHC with large-scale geothermal collector systems as well as other renewable heat sources.

This report aims to evaluate the potential of sharing energyregarding heat and cooling between buildings in a smalldecentralized energy system. A model of an energy substation wasdeveloped in IDA ICE Advanced level only system to create a timeefficient tool that is easy to handle for people in the industry.Three cases of building stocks with different heating and coolingdemands were modeled in the energy substation, both separately andcollectively, to investigate the differences in energy performanceas a result of energy recovery between buildings. The study also contained a sociotechnical aspect of thedecentralized energy system. Interviews were carried out to studyhow a mutual energy substation is implemented in reality and whatchallenges and opportunities the technology faces. An importantconclusion is that the future development for this new technologyis highly dependent on an increased cooperation between companiesin the industry.The simulations of the cases showed an improved energy performancefor the mutual energy substations in all three cases, sevenpercent improvement as most. The report concludes that there ispotential for an improved energy performance in a building stockwhen implementing a mutual energy substation since it enables theability to save energy through energy recovery. Furthermore, it isconcluded that a resembling heat and cooling demand within thebuilding stock increases the total energy performance of thesystem. An improved control system of the model is recommendedbefore deciding if and where it is beneficial to implement amutual energy substation.

This project aimed to investigate the existence of thermal surplus energy from the ice rinks at Gränby Sports Field, Uppsala. Furthermore, a secondary goal was to suggest a distribution system for sharing the potential surplus energy. To fulfil the purpose, each ice rink was modelled in the software IDA ICE. The following ice rinks were considered: buildings A and B, building C and the bandy arena. Data regarding the total heat and cold consumption for each building was collected from the owner, Uppsala kommun Sport- och rekreationsfastigheter AB, and was used to validate the simulation results from the building models. The results from IDA ICE were presented in graphs that illustrate each ice rink’s total heat and cold consumption, surplus energy and energy balance. However, the results from the models in IDA ICE were not validated within a deviation of a maximum of 10% when compared to the data from Uppsala kommun Sport- och rekreationsfastigheter AB. Hence, the results were analyzed on a general level, which showed that there was a greater need for heating during wintertime, with certain peaks during the coldest months, whereas the cooling is maintained at a relatively stable level throughout the year, but with a slightly greater need in the summer. Further on, there was an identified surplus energy from the ice rinks, in terms of waste heat from the refrigeration systems. During the summer there was a greater amount of surplus heat generated, caused by the greater cooling demand. Due to not being able to validate the models, complementary calculations of the yearly surplus heat were made with data from Uppsala kommun Sport- och rekreationsfastigheter AB. The surplus heat was 1 200 MWh for buildings A and B, 497 MWh for building C and 1 492 MWh for the bandy arena. No surplus cold was identified within the ice rinks. The suggested solution for sharing the surplus energy is to implement seasonal thermal storage, due to the similar characteristics in heating and cooling demand for the ice rinks. The stored surplus energy could cover the ice rink’s peaks in heating demand during winter, which is an energy-efficient way would reduce purchased heat from the district heating grid. For further studies, it is of great interest to identify the possibilities of implementing a distribution system similar to the fifth generation district heating as well as seasonal storage, to possibly enable a direct share of energy between all the buildings within the sports field.