Auswahl der wissenschaftlichen Literatur zum Thema „3D textile composites“
Geben Sie eine Quelle nach APA, MLA, Chicago, Harvard und anderen Zitierweisen an
Machen Sie sich mit den Listen der aktuellen Artikel, Bücher, Dissertationen, Berichten und anderer wissenschaftlichen Quellen zum Thema "3D textile composites" bekannt.
Neben jedem Werk im Literaturverzeichnis ist die Option "Zur Bibliographie hinzufügen" verfügbar. Nutzen Sie sie, wird Ihre bibliographische Angabe des gewählten Werkes nach der nötigen Zitierweise (APA, MLA, Harvard, Chicago, Vancouver usw.) automatisch gestaltet.
Sie können auch den vollen Text der wissenschaftlichen Publikation im PDF-Format herunterladen und eine Online-Annotation der Arbeit lesen, wenn die relevanten Parameter in den Metadaten verfügbar sind.
Zeitschriftenartikel zum Thema "3D textile composites":
Yahya, Mohamad Faizul, Faris Mohd Zulkifli Nasrun, Suzaini A. Ghani und Mohd Rozi Ahmad. „Factors Affecting Tensile Performance of 2D & 3D Angle Interlock Woven Fabric Composite: A Review“. Advanced Materials Research 1134 (Dezember 2015): 147–53. http://dx.doi.org/10.4028/www.scientific.net/amr.1134.147.
Lin, Hua, Louise P. Brown und Andrew C. Long. „Modelling and Simulating Textile Structures Using TexGen“. Advanced Materials Research 331 (September 2011): 44–47. http://dx.doi.org/10.4028/www.scientific.net/amr.331.44.
Deng, Tong, Vivek Garg und Michael S. A. Bradley. „Erosive Wear of Structured Carbon-Fibre-Reinforced Textile Polymer Composites under Sands Blasting“. Lubricants 12, Nr. 3 (15.03.2024): 94. http://dx.doi.org/10.3390/lubricants12030094.
Özev, Mahmut-Sami, und Andrea Ehrmann. „Sandwiching textiles with FDM Printing“. Communications in Development and Assembling of Textile Products 4, Nr. 1 (25.03.2023): 88–94. http://dx.doi.org/10.25367/cdatp.2023.4.p88-94.
El Kadi, Michael, Panagiotis Kapsalis, Danny Van Hemelrijck, Jan Wastiels und Tine Tysmans. „Influence of Loading Orientation and Knitted Versus Woven Transversal Connections in 3D Textile Reinforced Cement (TRC) Composites“. Applied Sciences 10, Nr. 13 (29.06.2020): 4517. http://dx.doi.org/10.3390/app10134517.
Wucher, B., S. Hallström, D. Dumas, T. Pardoen, C. Bailly, Ph Martiny und F. Lani. „Nonconformal mesh-based finite element strategy for 3D textile composites“. Journal of Composite Materials 51, Nr. 16 (20.09.2016): 2315–30. http://dx.doi.org/10.1177/0021998316669875.
Lüling, Claudia, Petra Rucker-Gramm, Agnes Weilandt, Johanna Beuscher, Dominik Nagel, Jens Schneider, Andreas Maier, Hans-Jürgen Bauder und Timo Weimer. „Advanced 3D Textile Applications for the Building Envelope“. Applied Composite Materials 29, Nr. 1 (15.10.2021): 343–56. http://dx.doi.org/10.1007/s10443-021-09941-8.
Zhao, Dong Lin, Hong Feng Yin, Yong Dong Xu, Fa Luo und Wan Cheng Zhou. „Complex Permittivity of 3D Textile SiC/C/SiC Composites Fabricated by Chemical Vapor Infiltration at X-Band Frequency“. Key Engineering Materials 368-372 (Februar 2008): 1028–30. http://dx.doi.org/10.4028/www.scientific.net/kem.368-372.1028.
Assi, P., S. Achiche und L. Laberge Lebel. „3D printing process for textile composites“. CIRP Journal of Manufacturing Science and Technology 32 (Januar 2021): 507–16. http://dx.doi.org/10.1016/j.cirpj.2021.02.003.
Heimbs, Sebastian, Björn Van Den Broucke, Yann Duplessis Kergomard, Frederic Dau und Benoit Malherbe. „Rubber Impact on 3D Textile Composites“. Applied Composite Materials 19, Nr. 3-4 (02.06.2011): 275–95. http://dx.doi.org/10.1007/s10443-011-9205-z.
Dissertationen zum Thema "3D textile composites":
Goktas, Devrim. „Interlaminar properties of 3D textile composites“. Thesis, University of Manchester, 2016. https://www.research.manchester.ac.uk/portal/en/theses/interlaminar-properties-of-3d-textile-composites(275e9cef-7b35-47b0-84ca-bcf6fb0c7fb4).html.
Waterton, Taylor Lindsey. „Design and manufacture of 3D nodal structures for advanced textile composites“. Thesis, University of Manchester, 2007. http://www.manchester.ac.uk/escholar/uk-ac-man-scw:151244.
Stig, Fredrik. „An Introduction to the Mechanics of 3D-Woven Fibre Reinforced Composites“. Licentiate thesis, Stockholm : Skolan för teknikvetenskap, Kungliga Tekniska högskolan, 2009. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-10235.
Rudov-Clark, Shoshanna Danielle, und srudov-clark@phmtechnology com. „Experimental Investigation of the Tensile Properties and Failure Mechanisms of Three-Dimensional Woven Composites“. RMIT University. AEROSPACE, MECHANICAL AND MANUFACTURING ENGINEERING, 2007. http://adt.lib.rmit.edu.au/adt/public/adt-VIT20080808.115853.
Liu, Yang. „Multi-scale damage modelling of 3D textile reinforced composites including microstructural variability generation and meso-scale reconstruction“. Thesis, Lille 1, 2017. http://www.theses.fr/2017LIL10089.
3D textile reinforced composites have gained extensive application in many industrial domains by taking their excellent mechanical properties and neat-shape manufacturing. However, lack of understanding in material behaviour might be limiting factors at the design stage. One of these limits is the complexity of the multi-scale phenomena which play a critical role in predicting the material response. In order to tackle this problem, the systematic and detailed investigations are required at different material scales. Therefore, this work addresses to study 3D composites alternating and combining numerical simulations and experimental observations at different material scales. Experiments were carried out to provide twofold parameters: material properties and required geometrical reconstruction parameters. X-ray tomography was employed to inspect the intact samples. Electronic and optical microscopy techniques have been used in order to investigate in details the yarn cross-sections at initial states and eventual damages mechanisms accumulated during mechanical tests. All those observations allowed choosing numerical strategies at different material scales. Thus, at the micro-scale, the modified molecular dynamics algorithm has been developed and tested on RVE and irregular cross-section yarns. The results show great capacity and originality in the generation of the microstructural variability. Consequently, at the meso-scale, the reconstruction strategy was chosen which allowed representing real mesostructure of the composites. This modelling technique has great importance in the prediction of the material response, especially at the non-linear stage
Risicato, Jean-Vincent. „Optimisation de l'architecture des fils dans une structure textile 3D pour le renforcement de pièces composites“. Thesis, Lille 1, 2012. http://www.theses.fr/2012LIL10070/document.
The RaidOUTILS project aims the production of textile reinforcement for composite parts. Manufacturing of stiffeners with constant, as well as variable, cross sectional shape is possible. Interlacing is possible trough the thickness of the material and leads to a wide range of fibre orientation within the textile reinforcement. The RaidOUTILS technology is a hybridisation of braiding and weaving manufacturing. By combining properties from both technologies, steps such as cutting, joining and forming can be avoid. Those steps introduce defect in traditional reinforcement manufacturing cycle. Based on independent motion for each yarn within the structure it is possible to control interlacing and modify cross section. Modelling is also proposed for this process. It represents the yarn kinematic based on the existing machinery. The simple model is necessary to have a low calculation time to get the virtual skeleton of the structure. This skeleton returns data such as interlacing, orientation of the preform. The aim of the project is the creation of a new 3D textile manufacturing process and also to make the link between a product (textile) and the process by modelling
Nauman, Saad. „Geometrical modelling and characterization of 3D warp interlock composites and their on-line structural health monitoring using flexible textile sensors“. Thesis, Lille 1, 2011. http://www.theses.fr/2011LIL10010/document.
This thesis is divided in two parts. In the first part a geometrical modelling approach has been developed in tandem with weaving parameters. The reinforcements were woven on a modified conventional loom to study the geometry of these structures. Their weaving has been described in detail. The weaving parameters have been correlated to the modelling approach. The meso structural modelling approach is capable of predicting essential reinforcement geometrical characteristics at meso structural level without being too complicated. Furthermore, mechanical characterization of 3D interlock reinforcements has been carried out in such a way that a track of mechanical properties during the complete production cycle has been maintained. A novel parameter called strength transfer coefficient was proposed which allows better understanding of the influence of structural parameters on the final properties of the composite. In the second part of the thesis an online structural health monitoring system which is composed of a textile based sensor and signal amplification and treatment module, has been developed. This system is capable of detecting structural deformations in the composite as the sensor is integrated during the manufacturing of the reinforcement and can follow its deformation pattern when composite is subjected to tensile loading in a real time
Verone, Benjamin. „Étude du comportement statique et dynamique d'un matériau composite textile interlock 3D - caractérisation expérimentale et modélisation numérique“. Master's thesis, Université Laval, 2018. http://hdl.handle.net/20.500.11794/35273.
This study presents the development of a tool for numerical simulation of the behavior of a special textile composite material called interlock 3D. This composite woven fabric exhibits interesting performance in terms of impact resistance and damage tolerance. These properties come from the presence of strands woven through the thickness. As a result, this material can be a very interesting alternative to conventional laminated composite, which have only planar oriented fibers, for aeronautical applications where elements are subjected to impacts and subjected to delamination. This work presents an experimental campaign aimed at characterizing the behavior of the material in the in-plane directions and through the thickness. Subsequently behavior laws are developed to reproduce the mechanical behavior in each direction. Seting up the mechanics of damage, as well as the inelastic behavior were the most complex parts. This model is subsequently implemented in the ABAQUS / Explicit finite element software using a VUMAT subroutine. Simulations of the material mechanical behavior are first performed to validate the predictions of the model in all the directions. Then, quasi-static indentation tests are performed and the results compared to the model predictions. Finally, dynamic impact simulations are carried out on the woven composite using rigid and soft projectiles as well as different configurations. Comparisons with experimental results show the model's good ability to reproduce the behavior of the material during impact with a rigid low-velocity projectile. High impact energies reflect shortcomings in the mechanics of damage close to rupture. Impact results with a soft low-velocity projectile are encouraging and show the ability of the model to provide a correct estimate of the impact force, although overestimated in some configurations
Parvathaneni, Keerthi Krishna. „Characterization and multiscale modeling of textile reinforced composite materials considering manufacturing defects“. Electronic Thesis or Diss., Ecole nationale supérieure Mines-Télécom Lille Douai, 2020. http://www.theses.fr/2020MTLD0016.
The influence of void-type manufacturing defects on the mechanical properties of textile composites was investigated both by experimental characterization and by multiscale modeling. In particular, voids characteristics such as not only void volume fraction but also its size, shape, and distribution have been characterized for textile composites and their effect on the mechanical properties have been analyzed. Several textile composite plates were fabricated by the resin transfer molding (RTM) process where 3D interlock glass textile reinforcement was impregnated by epoxy resin under a constant injection pressure to generate different types of voids. A series of mechanical tests were performed to examine the dependency of tensile modulus and strength of composites on the total void volume fraction, intra & inter-yarn void volume fraction, and their geometrical characteristics. Microscopy observations were performed to obtain the local information about fibers (diameter and distribution), and intra-yarn voids (radius, aspect ratio and distribution). Based on these results, a novel algorithm was proposed to generate the statistically equivalent representative volume element (RVE) containing voids. Moreover, the effect of void morphology, diameter and spatial distribution (homogeneous, random and clustering) on the homogenized properties of the yarns was also investigated by the finite element method. X-ray micro-computed tomography was employed to extract the real meso-scale geometry and inter-yarn voids. Subsequently, this data was utilized to create a numerical model at meso-scale RVE and used to predict the elastic properties of composites containing voids. A parametric study using a multiscale numerical method was proposed to investigate the effect of each void characteristic, i.e. volume fraction, size, shape, distribution, and location on the elastic properties of composites. Thus, the proposed multiscale method allows establishing a correlation between the void defects at different scales and the mechanical properties of textile composites
Bai, Renzi. „Modélisation de la mise en forme des renforts fibreux : Nouvelle Approche de coque spécifique et étude expérimentale“. Thesis, Lyon, 2020. http://www.theses.fr/2020LYSEI108.
The deformation of textile composite reinforcements is strongly conditioned by their fibrous composition. Classic plate and shell theories are based on kinematic assumptions that are not verified for textile reinforcements. Experiments show that the slippage between fiber (layer) in the thickness makes the specificity of fibrous materials. The RTM process (one of the forming process) is widely used to obtain composite parts with complex geometry is with great importance. In order to optimize the manufacturing of product, numerical models are necessary. Therefore, a 3D shell approach specific to fiber reinforcements is proposed which is based on two specificities: the quasi-inextensibility of the fibers and the possible sliding between the fibers. This approach is developed in the frame of continuum-based shell, the new assumption who based on the conservation of the thickness is applied to the kinematic equation. The theory of virtual power reflects the specific deformation of the fibrous reinforcements. It considers the tensile and bending stiffness of the fibers and the in-plan shear stiffness. The friction between fibers is taken into account in a simple way in connection with bending. The present approach is based on the real physics of the deformation of textile reinforcements. It simulates the 3D deformations of textile reinforcements and provides displacements and deformations for all the points along the thickness of the fabric and simulates the correct rotations of the material director. Finally, experiments and simulations performed on multilayer reinforcements are presented in this work, and a new method of experimentation is proposed
Bücher zum Thema "3D textile composites":
3d Textile Reinforcements In Composite Materials. Woodhead Publishing, 1999.
Buchteile zum Thema "3D textile composites":
El Kadi, Michael, Svetlana Verbruggen, Jolien Vervloet, Matthias De Munck, Jan Wastiels, Danny Van Hemelrijck und Tine Tysmans. „Experimental Investigation and Benchmarking of 3D Textile Reinforced Cementitious Composites“. In Strain-Hardening Cement-Based Composites, 400–408. Dordrecht: Springer Netherlands, 2017. http://dx.doi.org/10.1007/978-94-024-1194-2_47.
Zhao, Dong Lin, Hong Feng Yin, Yong Dong Xu, Fa Luo und Wan Cheng Zhou. „Complex Permittivity of 3D Textile SiC/C/SiC Composites Fabricated by Chemical Vapor Infiltration at X-Band Frequency“. In High-Performance Ceramics V, 1028–30. Stafa: Trans Tech Publications Ltd., 2008. http://dx.doi.org/10.4028/0-87849-473-1.1028.
Nikravan, Ata, Olcay Gurabi Aydogan, Gozdem Dittel, Martin Scheurer, Shantanu Bhat, Nilufer Ozyurt und Thomas Gries. „Implementation of Continuous Textile Fibers in 3D Printable Cementitious Composite“. In Lecture Notes in Civil Engineering, 1243–52. Cham: Springer Nature Switzerland, 2023. http://dx.doi.org/10.1007/978-3-031-32519-9_126.
Yang, Yu Qiu, Asami Nakai, Tadashi Uozumi und Hiroyuki Hamada. „Energy Absorption Capability of 3D Braided-Textile Composite Tubes with Rectangular Cross Section“. In Advances in Composite Materials and Structures, 581–84. Stafa: Trans Tech Publications Ltd., 2007. http://dx.doi.org/10.4028/0-87849-427-8.581.
Pickett, A. K., M. Schneider, B. Wulfhorst und P. J. Langer. „Design and Manufacture of 3D-Braided Textiles As a Reinforcement for Composites“. In Materials for Transportation Technology, 169–75. Weinheim, FRG: Wiley-VCH Verlag GmbH & Co. KGaA, 2005. http://dx.doi.org/10.1002/3527606025.ch28.
Gielis, Ciska, Michael El Kadi, Tine Tysmans und Didier Snoeck. „Mix Optimisation and Bending Behaviour of Cement Composites Reinforced with 3D Textiles and Microfibres“. In RILEM Bookseries, 209–16. Cham: Springer International Publishing, 2023. http://dx.doi.org/10.1007/978-3-031-15805-6_22.
El Kadi, M., C. Gielis, D. Toma, D. Van Hemelrijck, H. Rahier und T. Tysmans. „Spacers for 3D Textiles as Reinforcement in Cement Composites: Influence on the Flexural and Cracking Behavior“. In RILEM Bookseries, 217–27. Cham: Springer International Publishing, 2023. http://dx.doi.org/10.1007/978-3-031-15805-6_23.
Mouritz, A. P. „Fatigue of 3D textile-reinforced composites“. In Fatigue of Textile Composites, 255–74. Elsevier, 2015. http://dx.doi.org/10.1016/b978-1-78242-281-5.00011-0.
Carvelli, V., und S. V. Lomov. „Fatigue damage evolution in 3D textile composites“. In Fatigue of Textile Composites, 223–53. Elsevier, 2015. http://dx.doi.org/10.1016/b978-1-78242-281-5.00010-9.
Byun, J.-H., M.-K. Urn, B.-S. Hwang und S.-W. Song. „Impact Performance of 3D Interlock Textile Composites“. In Composite Technologies for 2020, 488–93. Elsevier, 2004. http://dx.doi.org/10.1016/b978-1-85573-831-7.50085-7.
Konferenzberichte zum Thema "3D textile composites":
WANG, YOUQI, BINGHUI LIU, LUN LI, AARON TOMICH und CHIAN FONG YEN. „CAD/CAM Tool for 3D Woven Textile Fabric Design“. In American Society for Composites 2017. Lancaster, PA: DEStech Publications, Inc., 2017. http://dx.doi.org/10.12783/asc2017/15209.
Zhou, Eric, David Mollenhauer und Endel Iarve. „Image Reconstruction Based Modeling of 3D Textile Composites“. In 48th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference. Reston, Virigina: American Institute of Aeronautics and Astronautics, 2007. http://dx.doi.org/10.2514/6.2007-2157.
Pochiraju, Kishore, T. W. Chou und Bharat Shah. „Modeling stiffness and strength of 3D textile structural composites“. In 37th Structure, Structural Dynamics and Materials Conference. Reston, Virigina: American Institute of Aeronautics and Astronautics, 1996. http://dx.doi.org/10.2514/6.1996-1579.
PATEL, DEEPAK, und ANTHONY M. WAAS. „Direct Numerical Simulation of 3D Woven Textile Composites Subjected to Compressive Loading: A Multiscale Approach“. In American Society for Composites 2018. Lancaster, PA: DEStech Publications, Inc., 2018. http://dx.doi.org/10.12783/asc33/25978.
Dickinson, Larry, und Mansour Mohamed. „Recent Advances in 3D Weaving for Textile Preforming“. In ASME 2000 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2000. http://dx.doi.org/10.1115/imece2000-2148.
PATEL, DEEPAK K., und ANTHONY M. WAAS. „Compressive Strength Prediction of 3D Woven Textile Composites: Single RVE Multiscale Analysis and Imperfection Sensitivity Study“. In American Society for Composites 2018. Lancaster, PA: DEStech Publications, Inc., 2018. http://dx.doi.org/10.12783/asc33/26103.
Cox, Brian, und Qingda Yang. „Failure Prediction for Textile Composites Via Micromechanics“. In ASME 2003 International Mechanical Engineering Congress and Exposition. ASMEDC, 2003. http://dx.doi.org/10.1115/imece2003-43491.
AGNIPROBHO MAZUMDER, AGNIPROBHO MAZUMDER, LI ZHENG LI ZHENG, YANG JIAO YANG JIAO, YONG YU YONG YU und YOUQI WANG YOUQI WANG. „PREDICTING DEFORMATION RESPONSE AND FAILURE OF 3D TEXTILE COMPOSITES USING REALISTIC MICROMECHANICAL MODELS“. In Proceedings for the American Society for Composites-Thirty Eighth Technical Conference. Destech Publications, Inc., 2023. http://dx.doi.org/10.12783/asc38/36522.
HOOS, KEVIN H., HARI K. ADLURU, ERIC ZHOU, CARL POPELAR, M. KEITH BALLARD, ENDEL V. IARVE und DAVID MOLLENHAUER. „PROGRESSIVE DAMAGE ANALYSIS OF OPEN HOLE COMPRESSION SPECIMENS CONTAINING COMPLEX 3D TEXTILE ARCHITECTURES USING DISCRETE DAMAGE MODELING AND INDEPENDENT MESH METHOD“. In Proceedings for the American Society for Composites-Thirty Eighth Technical Conference. Destech Publications, Inc., 2023. http://dx.doi.org/10.12783/asc38/36667.
Corte, C. „Fluid-structure Interaction of a 3D Finn Dinghy Sail Membrane with Surrounding Viscous Air Flow“. In 10th edition of the conference on Textile Composites and Inflatable Structures. CIMNE, 2021. http://dx.doi.org/10.23967/membranes.2021.023.